- Latest available (Revised)
- Point in Time (18/07/1995)
- Original (As made)
Version Superseded: 22/04/2011
Point in time view as at 18/07/1995. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Gas Appliances (Safety) Regulations 1995, Section 8.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
8. No manufacturer or his authorised representative established in the Community shall supply an appliance or a fitting in respect of which there is not in force at that time—
(a)an EC type-examination certificate and an EC declaration of conformity to type made in accordance with regulation 23; or
(b)an EC type-examination certificate and
(i)either—
(aa)an EC declaration of conformity (guarantee of production or product quality) made in accordance with regulation 16; or
(bb)an EC declaration of conformity (EC verification) made in accordance with regulation 17; and
(ii)either—
(aa)an EC declaration of conformity issued by a notified body under regulation 19 or 20; or
(bb)a fitting certificate issued under regulation 25(4); or
(c)an EC declaration of conformity (EC unit verification) made in accordance with regulation 18 and an EC certificate of conformity issued by a notified body under regulation 21,
or a corresponding declaration issued by a manufacturer or his authorised representative established in the Community, or a corresponding certificate issued, under the law of another member State.
Commencement Information
I1Reg. 8 in force at 18.7.1995, see reg. 1(2)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.