- Latest available (Revised)
- Point in Time (01/08/2012)
- Original (As made)
Version Superseded: 08/12/2016
Point in time view as at 01/08/2012.
There are currently no known outstanding effects for the The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 1996, Paragraph 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. This module describes that part of the procedure whereby the manufacturer or his authorized representative established within the [F1European Union] ensures and declares that the equipment in question is in conformity with the type as described in the EC-type-examination certificate and [F2satisfies] the requirements of the Directive applicable to [F3it]. The manufacturer or his authorized representative established within the [F1European Union] shall affix the CE marking to each piece of equipment and draw up a written declaration of conformity.E+W+S
Textual Amendments
F1Words in Regulations substituted (22.4.2011) by The Treaty of Lisbon (Changes in Terminology) Order 2011 (S.I. 2011/1043), arts. 2, 3-6
F2Word in Sch. 9 s. 1 substituted (21.12.2001) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (S.I. 2001/3766), regs. 1, 3(15)(a)(i)
F3Word in Sch. 9 s. 1 substituted (21.12.2001) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (S.I. 2001/3766), regs. 1, 3(15)(a)(ii)
Commencement Information
I1Sch. 9 para. 1 in force at 1.3.1996, see reg. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.