- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Climate Change Levy (Combined Heat and Power Stations) Regulations 2005.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Statutory Instruments
CLIMATE CHANGE LEVY
Made
21st July 2005
Coming into force in accordance with regulation 1
The Treasury, in exercise of the powers conferred by section 30 of and Schedule 6, paragraphs 15(4), 16(2), 16(3), 146(7), 147, 148(4), 148(7), 148(8), 148(9), 149(1), 149(2) and 149(3) to the Finance Act 2000 M1, make the following Regulations, a draft of which has, in accordance with paragraph 146(3) of that Schedule, been laid before Parliament and approved by a resolution of the House of Commons:
Marginal Citations
M12000 c. 17; paragraphs 15, 148 and 149 are amended by the Finance Act 2003 (c. 14) sections 189 and 216 and Schedule 43 Part 4(2) in relation to supplies made on or after such day as the Treasury may by order made by statutory instrument appoint (about which, see S.I. 2005/1713 (C. 72)).
1. These Regulations may be cited as the Climate Change Levy (Combined Heat and Power Stations) Regulations 2005 and shall come into force on the day after the day on which they are made.
2.—(1) In these Regulations—
“the Act” refers to Schedule 6 to the Finance Act 2000 M2;
“CCL” refers to climate change levy;
“CHPQA” refers to the Combined Heat and Power Quality Assurance Standard, Issue 1, November 2000 originally published by the Department for the Environment, Transport and the Regions (the “Standard”) (including the later of version Final 1.0 or 2.0 of CHPQA Guidance Notes M3 0 to 4 (including 2(S), 3(S) and 4(S)), 10 to 28 and 30);
“station” refers to a combined heat and power station or, in appropriate circumstances, to combined heat and power stations forming at least part of a single CHP Scheme.
(2) But, for the purposes of regulation 3(2), “CHPQA” refers to the current issue of that Standard and current versions of those and any subsequent Guidance Notes.
An issue or version is current for these purposes to the extent that it is neither varied, replaced nor revoked by another issue or version.
(3) These Regulations must be applied in a way consistent with the CHPQA and paragraph (2).
But, for the purposes of regulations 3(2) and 4, any reference in the CHPQA to any relevant “registered” quantity (whether or not mentioned in either regulation) must be treated as a reference to the actual quantity of that name for determination and calculation in accordance with the CHPQA.
That determination and calculation must be on the basis of events in relation to the given station during the given Annual Operation (for “Annual Operation”, see CHPQA Section 4 – 1st January to 31st December).
3.—(1) A station's threshold efficiency percentage is set as 20 per cent (see paragraphs 15(2)(b), 15(3)(b) and 15(4)(a) of the Act).
(2) A station's efficiency percentage for a given Annual Operation is its Power Efficiency in relation to that Operation (see paragraphs 15(4)(b), 149(1) and 149(2)(e) of the Act M4 and Section 5.6 of the Standard).
Marginal Citations
M4Paragraphs 15 and 149 are amended by the Finance Act 2003 (c. 14) sections 189 and 216 and Schedule 43 Part 4(2) in relation to supplies made on or after such day as the Treasury may by order made by statutory instrument appoint (about which, see S.I. 2005/1713 (C.72)).
4.—[F1(1)] The limit (see paragraph 16(2) of the Act) on the quantity of electricity that may be produced in and supplied from a partly exempt station exempt from CCL for a given Annual Operation is its CHP Qualifying Power Output in relation to that Operation (see Section 5.8 of the Standard).
[F2(2) For the purpose of establishing whether that limit is exceeded—
(a)any supplies made by a station—
(i)to a utility; or
(ii)for domestic or charity use (in either case such use has the respective meaning given in paragraphs 8 and 9 of the Act),
shall be disregarded; but
(b)the electrical equivalent of any mechanical output of a station produced otherwise than for the purpose of electricity generation shall be included.
(3) For the purposes of paragraph (2)(b), the electrical equivalent of any mechanical output of a station is derived by multiplying that output by 1.05.]
Textual Amendments
F1Reg. 4(1): reg. 4 renumbered as reg. 4(1) (1.4.2013) by The Climate Change Levy (Combined Heat and Power Stations) (Amendment) Regulations 2013 (S.I. 2013/232), regs. 1, 3(1)
F2Reg. 4(2)(3) inserted (1.4.2013) by The Climate Change Levy (Combined Heat and Power Stations) (Amendment) Regulations 2013 (S.I. 2013/232), regs. 1, 3(2)
5.—(1) The condition to be satisfied in relation to a station for the purpose of the Secretary of State giving a full-exemption certificate is as follows (see paragraph 148(4) of the Act).
(2) The station's Quality Index as determined and calculated in accordance with the CHPQA must at least meet the Threshold Quality Index Criterion specified for that station in the CHPQA (see Sections 5.5 and 4 of the Standard).
6.—(1) Paragraph (2) applies only if regulations 2(2) and 2(3) result in more than one issue of the Standard or version of a Guidance Note being current during the Annual Operation in question and, if they are treated as separately current for the whole Annual Operation, this yields different efficiency percentages for the purposes of regulation 3(2).
(2) The efficiency percentage in regulation 3(2) is then the weighted mean of those different efficiency percentages.
The weighting must reflect the proportion of fuel input to the station during the period in relation to which the relevant issue or version is current.
That proportion must be calculated relative to the station's actual total fuel input for the Annual Operation in question.
F37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F3Reg. 7 omitted (1.4.2013) by virtue of The Climate Change Levy (Combined Heat and Power Stations) (Amendment) Regulations 2013 (S.I. 2013/232), regs. 1, 4
8. The Climate Change Levy (Combined Heat and Power Stations) Prescribed Conditions and Efficiency Percentages Regulations 2001 and the Climate Change Levy (Combined Heat and Power Stations) Prescribed Conditions and Efficiency Percentages (Amendment) Regulations 2003 M5 are revoked.
Marginal Citations
Gillian Merron
Joan Ryan
Two of the Lords Commissioners of Her Majesty's Treasury
(This note is not part of the Regulations)
M6M7These Regulations relate to the reliefs from climate change levy (CCL) that may apply in the case of electricity produced in certified combined heat and power stations .
M8M9The exemption for supplies of leviable fuel to such stations is determined relative to an objective threshold efficiency percentage . Regulation 3(1) sets that threshold efficiency percentage as 20 per cent .
Marginal Citations
M8See the Finance Act 2000 (c. 17) Schedule 6 paragraph 15, which is amended by the Finance Act 2003 (c. 14) sections 189 and 216 and Schedule 43 Part 4(2) in relation to supplies made on or after such day as the Treasury may by order made by statutory instrument appoint (about which, see S.I. 2005/1713 (C.72)).
M9This threshold is identical with the one established at the start of climate change levy on 1st April 2001 by S.I. 2001/1140 regulation 3(1). (A threshold of 15 per cent applied until 1st April 2005 for a station that on 1st November 2000 was solely operating a steam engine or steam turbine, see S.I. 2001/1140 regulation 3(2)). S.I. 2001/1140 is revoked by regulation 8 of these Regulations.
M10M11M12M13The actual amount of exemption depends on the ratio between a station's efficiency percentage and the relevant threshold efficiency percentage . Regulation 3(2) provides for a station's efficiency percentage in relation to a given calendar year to be determined in accordance with methodology described in detail in the Combined Heat and Power Quality Assurance Standard, Issue 1, November 2000 originally published by the Department for the Environment, Transport and the Regions (the Standard) , , .
M14Electricity may be supplied from partly exempt stations free from CCL, but only up to a specified limit. Regulation 4 specifies the current calendar year's annual limit as the station's CHP Qualifying Power Output in relation to that year in accordance with the Standard .
Marginal Citations
M14Regulation 5 of S.I. 2001/1140, revoked by regulation 8 of these Regulations, made similar but less up to date provision by linking a station's limit to a stated quantity on the CHPQA certificate for the most recent calendar year's assessment. Regulation 7 of these Regulations preserves any benefit from that arrangement for the part of calendar year 2005 preceding these new arrangements.
M15M16A certified station is fully exempt or partly exempt for CCL purposes . Entitlement to a full-exemption certificate depends on prescribed conditions being satisfied .
Marginal Citations
M15See the Finance Act 2000 (c. 17) Schedule 6 paragraphs 148(2) and 148(3), which are amended by the Finance Act 2003 (c. 14) section 189 in relation to supplies made on or after such day as the Treasury may by order made by statutory instrument appoint (about which, see S.I. 2005/1713 (C.72)).
M16See the Finance Act 2000 (c. 17) Schedule 6 paragraph 148(4)(b).
Regulation 5 prescribes as a condition that the station's Quality Index measured in accordance with the Standard must at least meet a Threshold Quality Index Criterion specified by the Standard.
A full regulatory impact assessment has not been produced for this instrument as it has no impact on the costs of business, charities or voluntary bodies.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: