- Latest available (Revised)
- Point in Time (08/02/2008)
- Original (As made)
Version Superseded: 01/01/2010
Point in time view as at 08/02/2008. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Common Agricultural Policy Single Payment and Support Schemes (Cross-compliance) (England) Regulations 2005 (revoked), Paragraph 14.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
14.—(1) A farmer must not remove, or remove stone from, a stone wall.
(2) But a farmer may remove, or remove stone from, a stone wall—
(a)to widen an existing gateway in it to no more than 10 metres in order to provide access to the land for machinery or livestock, and in that case the ends of the wall created by the widening operation must be finished with a vertical face;
(b)if he uses the stone to repair another stone wall on his land which is in better condition than the stone wall which is removed or from which the stone is removed;
(c)if he uses the stone to make minor repairs to a footpath on his land; or
(d)if the Secretary of State has, in order to enhance the environment, improve public or agricultural access, or for reasons relating to livestock or crop production, given the farmer written permission to do so.
(3) In this paragraph—
(a)“stone wall” means a stone wall used as a field boundary with—
(i)a continuous length of at least 10 metres;
(ii)a continuous length of less than 10 metres which meets (whether by intersection or junction) another field boundary at each end; or
(iii)a continuous length of less than 10 metres which forms an enclosure;
(b)“footpath” has the meaning given to it in section 329(1) of the Highways Act 1980 M1.
Marginal Citations
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: