- Latest available (Revised)
- Point in Time (11/12/2006)
- Original (As made)
Version Superseded: 20/05/2018
Point in time view as at 11/12/2006.
There are currently no known outstanding effects for the The Motor Cycles Etc. (EC Type Approval) (Amendment) Regulations 2006 (revoked).
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Statutory Instruments
ROAD TRAFFIC
Made
9th November 2006
Laid before Parliament
15th November 2006
Coming into force
11th December 2006
The Secretary of State makes the following Regulations in exercise of the powers conferred by section 2(2) of the European Communities Act 1972 M1.
He has been designated M2 for the purposes of section 2(2) in relation to the regulation of the type, description, construction or equipment of vehicles, and components of vehicles, and in particular any vehicle type approval scheme.
Marginal Citations
M2S.I. 1972/1811, to which there are amendments not relevant to these Regulations.
1. These Regulations may be cited as the Motor Cycles Etc. (EC Type Approval) (Amendment) Regulations 2006 and shall come into force on 11th December 2006.
2.—(1) The Motor Cycles Etc. (EC Type Approval) Regulations 1999 M3 shall be amended as follows.
(2) In regulation 3 (interpretation) in paragraph (1) for the definition of “the Framework Directive” there shall be substituted—
““the Framework Directive” means Directive 2002/24/EC of the European Parliament and of the Council of 18th March 2002 relating to the type approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC M4, as last amended by Directive 2005/30/EC M5;”
(3) In the table in Schedule 1 (separate Directives) in item 12 after the last entry in the third and fourth columns there shall be inserted in those columns respectively—
“ 2005/30/EC* ” | “ L106, 27.4.2005, p 17 ” |
(4) Schedule 1A shall be omitted and the content of that Schedule shall be inserted after Schedule 1.
Marginal Citations
M3S.I. 1999/2920; relevant amending instruments are S.I. 2003/1099, 2004/1948.
M4OJ No. L 124, 9.5.2002, p.1; in so far as relevant, Directive 2002/24/EC was amended by Commission Directive 2003/77/EC (OJ No. L 211 21.8.2003, p.24), a Corrigendum (OJ No. L 49, 22.2.2003, p. 23) and Directive 2005/30/EC (see footnote (e)).
M5OJ No. L 106, 27.4.2005, p.17.
Signed by authority of the Secretary of State
S.J. Ladyman
Minister of State
Department for Transport
9th November 2006
(This note is not part of the Regulations)
These Regulations amend the Motor Cycles Etc. (EC Type Approval) Regulations 1999 (“the principal Regulations”) to implement Commission Directive 2005/30/EC of 22nd April 2005 amending, for the purposes of their adaptation to technical progress, Directives 97/24/EC and 2002/24/EC of the European Parliament and of the Council, relating to the type-approval of two or three-wheel motor vehicles (OJ No. L 106, 27.4.2005, p.17).
Directive 2005/30/EC introduces technical measures for the type approval, as separate technical units, of replacement catalytic converters to regulate emissions performance.
Regulation 2(2) amends the definition of “the Framework Directive” to provide that this expression means Directive 2002/24/EC of the European Parliament and of the Council of 18th March 2002 relating to the type approval of two or three-wheel motor vehicles and repealing Council Directive 92/61 as amended up to and including the amendments made by Directive 2005/30/EC.
Directive 97/24/EC of the European Parliament and of the Council of 17th June 1997 on certain components and characteristics of two or three-wheel motor vehicles is a “separate Directive” specified in Schedule 1 to the principal Regulations. Regulation 2(3) amends Schedule 1 to provide that, as such a separate Directive, Directive 97/24/EC is amended by Directive 2005/30/EC.
Regulation 2(4) corrects an error in the principal Regulations by placing Schedule 1A after Schedule 1.
A full regulatory impact assessment has not been prepared for this instrument as it has no impact on the costs of business.
This Explanatory Note incorporates the Transposition Note that would otherwise have been provided separately. Copies of the Directives referred to in these Regulations may be obtained from the Stationery Office.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: