Search Legislation

The Pyrotechnic Articles (Safety) Regulations 2010

Changes over time for: Section 14

 Help about opening options

Version Superseded: 17/08/2015

Alternative versions:

Status:

Point in time view as at 04/07/2010. This version of this provision has been superseded. Help about Status

Close

Status

You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.

Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.

Changes to legislation:

There are currently no known outstanding effects for the The Pyrotechnic Articles (Safety) Regulations 2010, Section 14. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Labelling requirementU.K.

This section has no associated Explanatory Memorandum

14.—(1) No manufacturer or, where regulation 7(1)(b) applies, no importer shall supply a category 1, 2 or 3 firework unless it is visibly, legibly and indelibly labelled in accordance with this regulation in the official language of the Member State in which the firework is supplied to the consumer.

(2) A category 1, 2 or 3 firework for supply to a consumer in the United Kingdom must be labelled in English.

(3) The labelling of a category 1, 2 or 3 firework shall include, at least—

(a)the name and address of the manufacturer;

(b)where the manufacturer is not established in the EU, the name of the manufacturer and the name and address of the importer;

(c)the name, type and category of the firework;

(d)the minimum age limits, in accordance with regulation 15 or the limits of the Member State in which the firework is supplied to the consumer;

(e)instructions for use;

(f)the net explosive quantity of active explosive material; and

(g)where appropriate, a minimum safety distance.

(4) In addition, the labelling of a category 1 firework shall include, where appropriate, at least—

(a)the statement “for outdoor use only”; and

(b)a minimum safety distance.

(5) In addition, the labelling of a category 2 firework shall include at least—

(a)the statement “for outdoor use only”; and

(b)where appropriate, a minimum safety distance.

(6) In addition, the labelling of a category 3 firework shall include at least—

(a)the statement “for outdoor use only”;

(b)a minimum safety distance; and

(c)the year of production.

(7) The labelling of the packet in which a sparkler is contained shall include the words “Warning: not to be given to children under 5 years of age”.

(8) If a category 1, 2 or 3 firework does not provide sufficient space for the labelling requirements in paragraphs (3) to (6), the information shall be provided on the retail packaging of the firework.

(9) Paragraph (8) shall not prevent information being provided on other packaging of the firework.

(10) This regulation does not apply to a firework falling within regulation 16 or 17 (exceptions for trade fairs, etc and research and development).

(11) In this regulation, “sparkler” means a rigid wire article partially coated along one end with slow-burning pyrotechnic composition, with or without an ignition head and designed to be held in the hand, the principal effect of which is to emit sparks, with or without aural effects (other than a report).

Commencement Information

I1Reg. 14 in force at 4.7.2010, see reg. 1(1)

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources