- Latest available (Revised)
- Point in Time (04/07/2010)
- Original (As made)
Version Superseded: 17/08/2015
Point in time view as at 04/07/2010. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Pyrotechnic Articles (Safety) Regulations 2010, Section 19.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
19.—(1) An enforcement authority under the duty referred to in regulation 18 (market surveillance and enforcement), and the Secretary of State under the power referred to in that regulation, may use any provisions of the Act relating to enforcement to enforce regulation 4(1) and Part 2.
(2) Where an enforcement authority or, where appropriate, the Secretary of State becomes aware that a category 1, 2 or 3 firework, used in accordance with its intended purpose, is liable to endanger the health and safety of persons the enforcement authority shall take, and the Secretary of State may take, such of the following actions as is most appropriate in the circumstances against the manufacturer, importer or distributor as the case may be.
(3) The actions include—
(a)in relation to the Secretary of State, serving a prohibition notice (within the meaning of section 13(1)(a) of the Act);
(b)in relation to the Secretary of State, serving a notice to warn (within the meaning of section 13(1)(b) of the Act);
(c)serving a suspension notice (within the meaning of section 14 of the Act); or
(d)serving a withdrawal notice (within the meaning of regulation 14 of the General Product Safety Regulations 2005(1)).
(4) For the purposes of taking the action referred to in paragraph (3)(d), regulations 14, 16, and 17 of the General Product Safety Regulations 2005 shall be applied.
(5) Where a withdrawal notice is served under paragraph 3(d), the conditions for serving the notice that would otherwise apply under the General Product Safety Regulations 2005 are satisfied by complying with these Regulations.
(6) For the purpose of applying the provisions referred to in paragraph (4), a “producer” referred to in those provisions is a “manufacturer” or an “importer” and a “distributor” referred to in those provisions has the meaning specified in regulation 2.
(7) Where an enforcement authority takes any action under paragraph (2) it shall notify the Secretary of State as soon a practicable, specifying its reasons for taking the action.
(8) Where an enforcement authority has notified the Secretary of State under paragraph (7), it shall notify the Secretary of State of any modification or lifting of any such action.
(9) Where the Secretary of State is notified under paragraph (7) or (8) in relation to a category 1, 2 or 3 firework which bears a CE marking and is accompanied by an EC declaration of conformity, the Secretary of State shall inform the European Commission and other relevant Member States of the action.
(10) This paragraph applies where the Secretary of State has sufficient reason to believe that a category 1, 2 or 3 firework presents a serious risk to the health or safety of persons in the EU.
(11) Where paragraph (10) applies the Secretary of State shall—
(a)inform the European Commission and other Member States of that risk;
(b)perform an appropriate evaluation; and
(c)inform the European Commission and other Member States of the background for and the results of the evaluation.
(12) This Regulation does not prevent an enforcement authority or the Secretary of State taking other enforcement action under the General Product Safety Regulations 2005.
Commencement Information
I1Reg. 19 in force at 4.7.2010, see reg. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: