Search Legislation

The Environmental Permitting (England and Wales) Regulations 2010

Changes over time for: The Environmental Permitting (England and Wales) Regulations 2010 (Schedules only)

 Help about opening options

Version Superseded: 06/04/2010

Status:

Point in time view as at 29/03/2011.

Changes to legislation:

There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Environmental Permitting (England and Wales) Regulations 2010. Any changes that have already been made by the team appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.

Regulation 2(1)

SCHEDULE 1E+W+SActivities, installations and mobile plant

PART 1 E+W+SInterpretation and application: general

InterpretationE+W+S

1.  In this Schedule—

activity” means, subject to this Part, an activity listed in Part 2 of this Schedule;

background quantity” means, in relation to the release of a substance resulting from an activity, such quantity of that substance as is present in—

(a)

water supplied to the site where the activity is carried on,

(b)

water abstracted for use in the activity, and

(c)

precipitation onto the site on which the activity is carried on;

controlled waters” has the meaning given in section 104 of the 1991 Act;

directly associated activity”, in relation to an activity other than a SED activity, means an operation which—

(a)

has a technical connection with the activity,

(b)

is carried on on the same site as the activity, and

(c)

could have an effect on pollution;

installation” means (except where used in the definition of “excluded plant” in Section 5.1 of Part 2 of this Schedule)—

(a)

a stationary technical unit where one or more activities are carried on, and

(b)

any other location on the same site where any other directly associated activities are carried on,

and references to an installation include references to part of an installation;

net rated thermal input” means the rate at which fuel can be burned at the maximum continuous rating of the appliance multiplied by the net calorific value of the fuel and expressed as megawatts thermal;

Part A activity” means a Part A(1) activity or a Part A(2) activity;

Part A(1) activity” means an activity falling within Part A(1) of any Section in Part 2 of this Schedule;

Part A(2) activity” means an activity falling within Part A(2) of any Section in Part 2 of this Schedule;

Part A installation” means a Part A(1) installation or a Part A(2) installation;

Part A(1) installation” means an installation where there is carried on—

(a)

a Part A(1) activity,

(b)

a Part A(1) activity and either a Part A(2) activity or a Part B activity, or

(c)

a Part A(1) activity, a Part A(2) activity and a Part B activity;

Part A(2) installation” means an installation, not being a Part A(1) installation, where there is carried on—

(a)

a Part A(2) activity, or

(b)

a Part A(2) activity and a Part B activity;

Part A mobile plant” means Part A(1) mobile plant or Part A(2) mobile plant;

Part A(1) mobile plant” means plant, other than an installation, that is used to carry on—

(a)

a Part A(1) activity,

(b)

a Part A(1) activity and either a Part A(2) activity or a Part B activity, or

(c)

a Part A(1) activity, a Part A(2) activity and a Part B activity;

Part A(2) mobile plant” means plant, other than an installation, that is used to carry on—

(a)

a Part A(2) activity, or

(b)

a Part A(2) activity and a Part B activity;

Part B activity” means an activity falling within Part B of any Section in Part 2 of this Schedule;

Part B installation” means, subject to Sections 2.2, 5.1 and 6.4 of Part 2 of this Schedule, an installation, not being a Part A installation, where a Part B activity is carried on; and

Part B mobile plant” means plant, not being Part A mobile plant, that is designed to move or be moved whether on roads or other land and that is used to carry on a Part B activity.

Activities falling within more than one Part descriptionE+W+S

2.—(1) Where, in Part 2 of this Schedule, an activity falls within a description in Part A(1) and a description in Part A(2) that activity must be regarded as falling only within that description which fits it most aptly.

(2) Where, in Part 2 of this Schedule, an activity falls within a description in Part A(1) and a description in Part B (other than a description in Section 7) that activity must be regarded as falling only within the description in Part A(1).

(3) Where, in Part 2 of this Schedule, an activity falls within a description in Part A(2) and a description in Part B (other than a description in Section 7) that activity must be regarded as falling only within the description in Part A(2).

Application of activities falling within Sections 1.1 to 6.9 of Part 2E+W+S

3.  An activity is not to be taken to be an activity falling within Sections 1.1 to 6.9 of Part 2 of this Schedule if it is—

(a)carried on in a working museum to demonstrate an industrial activity of historic interest;

(b)carried on for educational purposes in a school as defined in section 4(1) of the Education Act 1996 M1;

(c)carried on at an installation or by means of Part A mobile plant or Part B mobile plant solely used for research, development and testing of new products and processes;

(d)the running on or within an aircraft, hovercraft, mechanically propelled road vehicle, railway locomotive or ship or other vessel of an engine which propels or provides electricity for it;

(e)the running of an engine in order to test it before it is installed or in the course of its development; or

(f)carried on as a domestic activity in connection with a private dwelling.

Marginal Citations

Capacity: Part A(1) and A(2) descriptionsE+W+S

4.—(1) This paragraph applies for the purpose of determining whether an activity carried on in a stationary technical unit falls within a description in Part A(1) or Part A(2) of Part 2 of this Schedule which refers to capacity, other than design holding capacity.

(2) Where a person carries out several activities falling within the same description in Part A(1) or Part A(2) in different parts of the same stationary technical unit or in different stationary technical units on the same site, the capacities of each part or unit, as the case may be, must be added together and the total capacity must be attributed to each part or unit for the purpose of determining whether the activity carried on in each part or unit falls within a description in Part A(1) or Part A(2).

(3) For the purpose of sub-paragraph (2), no account must be taken of capacity when determining whether activities fall within the same description.

(4) Where an activity falls within a description in Part A(1) or Part A(2) by virtue of this paragraph it is not to be taken to be an activity falling within a description in Part B (other than a description in Section 7).

Operation below thresholds: effect on the installationE+W+S

5.  Where an operator is authorised by an environmental permit to operate an installation at which Part A(1) activities, Part A(2) activities or Part B activities which are described in Part 2 of this Schedule by reference to a threshold (whether in terms of capacity or otherwise) are carried on, the installation does not cease to be a Part A(1) installation, a Part A(2) installation or a Part B installation, as the case may be, by virtue of the installation being operated below the relevant threshold unless the permit ceases to have effect in accordance with these Regulations.

Application of Part B activities: releases into the airE+W+S

6.—(1) Subject to sub-paragraph (2), an activity is not to be taken to be a Part B activity within Part 2 of this Schedule if it cannot result in the release into the air of a substance listed in sub-paragraph (3) or there is no likelihood that it will result in the release into the air of any such substance except in a quantity which is so trivial that it is incapable of causing pollution or its capacity to cause pollution is insignificant.

(2) Sub-paragraph (1) does not apply to—

(a)a SED activity; or

(b)an activity which may give rise to an offensive smell noticeable outside the site where the activity is carried on.

(3) References to, or to the release into the air of, a substance listed in this paragraph are to any of the following substances—

(a)oxides of sulphur and other sulphur compounds;

(b)oxides of nitrogen and other nitrogen compounds;

(c)oxides of carbon;

(d)organic compounds and partial oxidation products;

(e)metals, metalloids and their compounds;

(f)asbestos (suspended particulate matter and fibres), glass fibres and mineral fibres;

(g)halogens and their compounds;

(h)phosphorus and its compounds;

(i)particulate matter.

References to releases into waterE+W+S

7.  References in Part 2 of this Schedule to a substance, or to the release into water of a substance, listed in this paragraph or to its release in a quantity which, in any 12-month period, is greater than the background quantity by an amount specified in this paragraph are references to the following substances and amounts—

Table
SubstanceAmount greater than the background quantity (in grammes) in any 12-month period
Mercury and its compounds200 (expressed as metal)
Cadmium and its compounds1,000 (expressed as metal)
All isomers of hexachlorocyclohexane20
All isomers of DDT5
Pentachlorophenol and its compounds350 (expressed as PCP)
Hexachlorobenzene5
Hexachlorobutadiene20
Aldrin2
Dieldrin2
Endrin1
Polychlorinated Biphenyls1
Dichlorvos0.2
1, 2—Dichloroethane2,000
All isomers of trichlorobenzene75
Atrazine350*
Simazine350*
Tributyltin compounds4 (expressed as TBT)
Triphenyltin compounds4 (expressed as TPT)
Trifluralin20
Fenitrothion2
Azinphos-methyl2
Malathion2
Endosulfan0.5

* Where both Atrazine and Simazine are released, the figure for both substances in aggregate is 350 grammes.

References to certain substancesE+W+S

8.—(1) References in Part 2 of this Schedule to a substance listed in this paragraph are to any of the following substances—

(a)alkali metals and their oxides and alkaline earth metals and their oxides;

(b)organic solvents;

(c)azides;

(d)halogens and their covalent compounds;

(e)metal carbonyls;

(f)organo-metallic compounds;

(g)oxidising agents;

(h)polychlorinated dibenzofuran and any congener thereof;

(i)polychlorinated dibenzo-p-dioxin and any congener thereof;

(j)polyhalogenated biphenyls, terphenyls and naphthalenes;

(k)phosphorus;

(l)pesticides.

(2) In this paragraph, “pesticide” means any chemical substance or preparation prepared or used for destroying any pest, including those used for—

(a)protecting plants or wood or other plant products from harmful organisms;

(b)regulating the growth of plants;

(c)giving protection against harmful creatures or rendering such creatures harmless;

(d)controlling organisms with harmful or unwanted effects on water systems, buildings or other structures, or on manufactured products; or

(e)protecting animals against ectoparasites.

PART 2E+W+SActivities

CHAPTER 1E+W+SEnergy activities

SECTION 1.1E+W+SCombustion activities
Interpretation of Section 1.1E+W+S

1.  In this Section “recovered oil” means waste oil which has been processed before being used.E+W+S

Part A(1)

(a)Burning any fuel in an appliance with a rated thermal input of 50 or more megawatts.

(b)Unless carried on as part of a Part A(2) or Part B activity, burning any—

(i)waste oil;

(ii)recovered oil; or

(iii)fuel manufactured from, or comprising, any other waste,

in an appliance with a rated thermal input of 3 or more megawatts, but less than 50 megawatts.

Interpretation and application of Part A(1)E+W+S

1.  For the purpose of Part A(1)(a) of this Section, where 2 or more appliances with an aggregate rated thermal input of 50 megawatts or more are operated on the same site by the same operator those appliances must be treated as a single appliance with a rated thermal input of 50 megawatts or more.E+W+S

2.  Nothing in this Part of this Section applies to burning fuels in an appliance installed on an offshore platform situated on, above or below those parts of the sea adjacent to England and Wales from the low water mark to the seaward baseline of the United Kingdom territorial sea.E+W+S

3.  In paragraph 2, “offshore platform” means any fixed or floating structure which—E+W+S

(a)is used for the purposes of or in connection with the production of petroleum; and

(b)in the case of a floating structure, is maintained on a station during the course of production,

but does not include any structure where the principal purpose of the use of the structure is the establishment of the existence of petroleum or the appraisal of its characteristics, quality or quantity or the extent of any reservoir in which it occurs.

4.  In paragraph 3, “petroleum” includes any mineral oil or relative hydrocarbon and natural gas existing in its natural condition in strata but does not include coal or bituminous shales or other stratified deposits from which oil can be extracted by destructive distillation.E+W+S

5.  In Part A(1)(b)(iii) of this Section, “fuel” excludes gas produced by biological degradation of waste in a landfill that is not listed in Part 2 of this Schedule.E+W+S

Part B

Unless falling within Part A(1)(a) of this Section—

(a)Burning any fuel (other than a fuel mentioned in Part A(1)(b)) in—

(i)a boiler;

(ii)a furnace;

(iii)a gas turbine; or

(iv)a compression ignition engine,

with a net rated thermal input of 20 or more megawatts, but a rated thermal input of less than 50 megawatts.

(b)Burning any—

(i)waste oil;

(ii)recovered oil;

(iii)solid fuel which has been manufactured from waste by an activity involving the application of heat,

in an appliance with a rated thermal input of less than 3 megawatts.

(c)Burning fuel manufactured from or including waste (other than a fuel mentioned in paragraph (b)) in an appliance with a net rated thermal input of 0.4 or more megawatts, but a rated thermal input of less than 3 megawatts.

(d)Burning fuel manufactured from or including waste (other than a fuel mentioned in paragraph (b)) in 2 or more appliances which have a combined net rated thermal input of 0.4 or more megawatts, but a rated thermal input of less than 3 megawatts.

Interpretation and application of Part BE+W+S

1.  Part B does not apply to any activity falling within Part A(1) or Part A(2) of Section 5.1.E+W+S

2.  In Part B(c) or (d) of this Section, “fuel” does not include gas produced by biological degradation of waste.E+W+S

SECTION 1.2E+W+SGasification, Liquefaction and Refining Activities

Part A(1)

(a)Refining gas where this is likely to involve the use of 1,000 or more tonnes of gas in any 12-month period.

(b)Reforming natural gas.

(c)Operating coke ovens.

(d)Coal or lignite gasification.

(e)Producing gas from oil or other carbonaceous material (or from mixtures of oil or other carbonaceous material), other than from sewage, unless the production is carried on as part of an activity which is a combustion activity (whether or not that combustion activity is described in Section 1.1).

(f)Purifying or refining any product of any of the activities falling within paragraphs (a) to (e) or converting it into a different product.

(g)Refining mineral oils.

(h)The loading, unloading, handling or storage of, or the physical, chemical or thermal treatment of—

(i)crude oil;

(ii)stabilised crude petroleum;

(iii)crude shale oil;

(iv)where related to another activity described in this paragraph, any associated gas or condensate; or

(v)emulsified hydrocarbons intended for use as a fuel.

(i)The further refining, conversion or use (otherwise than as a fuel or solvent) of the product of any activity falling within paragraph (g) or (h) in the manufacture of a chemical.

(j)Activities involving the pyrolysis, carbonisation, distillation, liquefaction, gasification, partial oxidation or other heat treatment of—

(i)coal (other than the drying of coal);

(ii)lignite;

(iii)oil;

(iv)other carbonaceous material; or

(v)mixtures of any of these,

otherwise than with a view to making charcoal.

(k)Odorising natural gas or liquefied petroleum gas where that activity is related to a Part A activity.

Interpretation and application of Part A(1)E+W+S

1.  Part A(1)(j) does not include—E+W+S

(a)the use of any substance as a fuel;

(b)the incineration of any substance as a waste;

(c)any activity for the treatment of sewage or sewage sludge.

2.  In Part A(1)(j), the heat treatment of oil, other than distillation, does not include the heat treatment of waste oil or waste emulsions containing oil in order to recover the oil from aqueous emulsions.E+W+S

3.  In Part A(1), “carbonaceous material” includes such materials as charcoal, coke, peat, rubber and wood, but does not include wood which has not been chemically treated.E+W+S

Part A(2)

(a)Refining gas where this activity does not fall within Part A(1)(a) of this Section.

Part B

(a)Blending odorant for use with natural gas or liquefied petroleum gas.

(b)The storage of petrol in stationary storage tanks at a terminal, or the loading or unloading at a terminal of petrol into or from road tankers, rail tankers or inland waterway vessels.

(c)The unloading of petrol into stationary storage tanks at a service station, if the total quantity of petrol unloaded into such tanks at the service station in any 12-month period is likely to be 500m3 or more.

(d)Motor vehicle refuelling activities at an existing service station after the prescribed date, if the petrol refuelling throughput at the existing service station in any 12-month period is, or is likely to be, 3500m3 or more.

(e)Motor vehicle refuelling activities at a new service station, if the petrol refuelling throughput at the service station in any 12-month period is likely to be 500m3 or more.

Interpretation of Part BE+W+S

1.  In Part B—E+W+S

existing service station” means a service station—

(a)

which was put into operation; or

(b)

for which planning permission under the Town and Country Planning Act 1990 M2 was granted,

before 31st December 2009;

inland waterway vessel” means a vessel, other than a sea-going vessel, having a total dead weight of 15 or more tonnes;

new service station” means a service station which is put into operation on or after 31st December 2009, other than an existing service station;

petrol” means any petroleum derivative (other than liquefied petroleum gas), with or without additives, having a Reid vapour pressure of 27.6 or more kilopascals, which is intended for use as a fuel for motor vehicles;

prescribed date” means—

(a)

if an application for the grant or variation of an environmental permit was made under the 2007 Regulations on or before 1st January 2010—

(i)

if the application was granted, the date of grant,

(ii)

if the application was refused and the applicant appeals against the refusal, the date of the appeal determination or the date the appeal is withdrawn, or

(iii)

if the application was refused, and the applicant does not appeal against the refusal, the day after the last day on which an appeal could be brought; or

(b)

if no such application is made, 1st January 2010;

service station” means any premises where petrol is dispensed to motor vehicle fuel tanks from stationary storage tanks;

terminal” means any premises which are used for the storage and loading of petrol into road tankers, rail tankers or inland waterway vessels.

Marginal Citations

2.  Any other expressions used in Part B which are also used in Directive 94/63/EC on the control of volatile organic compound (VOC) emissions resulting from the storage of petrol and its distribution from terminals to service stations M3 have the same meaning as in that Directive.E+W+S

Marginal Citations

M3OJ No L 365, 31.12.1994, p 24, as amended by Regulation (EC) No 1882/2003 (OJ No L 284, 31.10.2003, p 1).

CHAPTER 2E+W+SProduction and Processing of Metals

SECTION 2.1E+W+SFerrous Metals
Interpretation of Section 2.1E+W+S

1.  In this Section, “ferrous alloy” means an alloy of which iron is the largest constituent, or equal to the largest constituent, by weight, whether or not that alloy also has a non-ferrous metal content greater than any percentage specified in Section 2.2.E+W+S

Part A(1)

(a)Roasting or sintering metal ore, including sulphide ore, or any mixture of iron ore with or without other materials.

(b)Producing, melting or refining iron or steel or any ferrous alloy, including continuous casting, except where the only furnaces used are—

(i)electric arc furnaces with a designed holding capacity of less than 7 tonnes, or

(ii)cupola, crucible, reverbatory, rotary, induction, vacuum, electro-slag or resistance furnaces.

(c)Processing ferrous metals and their alloys by using hot-rolling mills with a production capacity of more than 20 tonnes of crude steel per hour.

(d)Loading, unloading or otherwise handling or storing more than 500,000 tonnes in total in any 12-month period of iron ore, except in the course of mining operations, or burnt pyrites.

Part A(2)

(a)Unless falling within Part A(1)(b) of this Section, producing pig iron or steel, including continuous casting, in a plant with a production capacity of more than 2.5 tonnes per hour.

(b)Operating hammers in a forge, the energy of which is more than 50 kilojoules per hammer, where the calorific power used is more than 20 megawatts.

(c)Applying protective fused metal coatings with an input of more than 2 tonnes of crude steel per hour.

(d)Casting ferrous metal at a foundry with a production capacity of more than 20 tonnes per day.

Part B

(a)Unless falling within Part A(1)(b) of this Section, producing pig iron or steel, including continuous casting, in a plant with a production capacity of 2.5 or less tonnes per hour.

(b)Unless falling within Part A(2)(a) or (d) of this Section, producing, melting or refining iron or steel or any ferrous alloy (other than producing pig iron or steel, including continuous casting) using—

(i)one or more electric arc furnaces, none of which has a designed holding capacity of 7 or more tonnes; or

(ii)a cupola, crucible, reverberatory, rotary, induction, electro-slag or resistance furnace.

(c)Desulphurising iron, steel or any ferrous alloy.

(d)Heating iron, steel or any ferrous alloy (whether in a furnace or other appliance) to remove grease, oil or any other non-metallic contaminant (including such operations as the removal by heat of plastic or rubber covering from scrap cable) unless—

(i)it is carried on in one or more furnaces or other appliances the primary combustion chambers of which have in aggregate a rated thermal input of less than 0.2 megawatts;

(ii)it does not involve the removal by heat of plastic or rubber covering from scrap cable or of any asbestos contaminant; and

(iii)it is not related to any other activity falling within this Part of this Section.

(e)Unless falling within Part A(1) or Part A(2) of this Section, casting iron, steel or any ferrous alloy from deliveries of 50 or more tonnes of molten metal.

SECTION 2.2E+W+SNon-Ferrous Metals
Interpretation and application of Section 2.2E+W+S

1.  In this Section “non-ferrous metal alloy” means an alloy which is not a ferrous alloy, as defined in Section 2.1.E+W+S

2.  Part A(1)(c) to (h) and Part B do not apply to hand soldering, flow soldering or wave soldering.E+W+S

Part A(1)

(a)Unless falling within Part A(2) of this Section, producing non-ferrous metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic activities.

(b)Melting, including making alloys, of non-ferrous metals, including recovered products (such as refining or foundry casting) where—

(i)the plant has a melting capacity of more than 4 tonnes per day for lead or cadmium or 20 tonnes per day for all other metals; and

(ii)any furnace (other than a vacuum furnace), bath or other holding vessel used in the plant for the melting has a design holding capacity of 5 or more tonnes.

(c)Except where the activity is related to an activity described in Part A(2)(a), or Part B(a), (d) or (e) of this Section, refining any non-ferrous metal or alloy, other than the electrolytic refining of copper.

(d)Producing, melting or recovering by chemical means or by the use of heat, lead or any lead alloy, if—

(i)the activity may result in the release into the air of lead; and

(ii)in the case of lead alloy, the percentage by weight of lead in the alloy in molten form is more than 23 per cent if the alloy contains copper and 2 per cent in other cases.

(e)Recovering any gallium, indium, palladium, tellurium or thallium if the activity may result in their release into the air.

(f)Producing, melting or recovering (whether by chemical means or by electrolysis or by the use of heat) cadmium or mercury or any alloy containing more than 0.05 per cent by weight of either of those metals or both in aggregate.

(g)Mining zinc- or tin-bearing ores where the activity may result in the release into water of cadmium or any compound of cadmium in a concentration which is greater than the background concentration.

(h)Manufacturing or repairing involving the use of beryllium or selenium or an alloy containing one or both of those metals, if the activity may result in the release into the air of any substance in paragraph 6(3) of Part 1 of this Schedule; but an activity does not fall within this paragraph by reason of it involving an alloy that contains beryllium if that alloy in molten form contains less than 0.1 per cent by weight of beryllium and the activity falls within Part B(a) or (d) of this Section.

(i)Pelletising, calcining, roasting or sintering any non-ferrous metal ore or any mixture of such ore and other materials.

Interpretation of Part A(1)E+W+S

1.  In Part A(1)(g), “background concentration” means any concentration of cadmium or any compound of cadmium which would be present in the release irrespective of any effect the activity may have had on the composition of the release and includes such concentration of those substances as is present in—E+W+S

(a)water supplied to the site where the activity is carried on;

(b)water abstracted for use in the activity; and

(c)precipitation onto the site on which the activity is carried on.

Part A(2)

[F1(a) Melting, including making alloys, of non-ferrous metals, including recovered products (such as refining or foundry casting) where the plant has a melting capacity of more than 4 tonnes per day for lead or cadmium or 20 tonnes per day for all other metals, and

(i)no furnace (other than a vacuum furnace), bath or other holding vessel used in the plant for the melting has a design holding capacity of 5 or more tonnes; or

(ii)the plant uses a vacuum furnace of any design holding capacity.]

Part B

(a)Melting, including making alloys, of non-ferrous metals (other than tin or any alloy which in molten form contains 50 per cent or more by weight of tin), including recovered products (such as refining or foundry casting) in plant with a melting capacity of 4 tonnes or less per day for lead or cadmium or 20 tonnes or less per day for all other metals.

(b)The heating in a furnace or any other appliance of any non-ferrous metal or non-ferrous metal alloy for the purpose of removing grease, oil or any other non-metallic contaminant, including such operations as the removal by heat of plastic or rubber covering from scrap cable, if not related to another activity described in this Part of this Section; but an activity does not fall within this paragraph if—

(i)it involves the use of one or more furnaces or other appliances the primary combustion chambers of which have in aggregate a net rated thermal input of less than 0.2 megawatts; and

(ii)it does not involve the removal by heat of plastic or rubber covering from scrap cable or of any asbestos contaminant.

(c)Melting zinc or a zinc alloy in conjunction with a galvanising activity at a rate of 20 or less tonnes per day.

(d)Melting zinc, aluminium or magnesium or an alloy of one or more of these metals in conjunction with a die-casting activity at a rate of 20 or less tonnes per day.

(e)Unless falling within Part A(1) or Part A(2) of this Section, the separation of copper, aluminium, magnesium or zinc from mixed scrap by differential melting.

Interpretation and application of Part BE+W+S

1.  When determining the extent of an installation carrying on an activity within Part B(e), any location where the associated storage or handling of scrap which is to be heated as part of that activity is carried on, other than a location where scrap is loaded into a furnace, is to be ignored.E+W+S

SECTION 2.3E+W+SSurface Treating Metals and Plastic Materials

Part A(1)

(a)Unless falling within Part A(2) of this Section, surface treating metals and plastic materials using an electrolytic or chemical process where the aggregated volume of the treatment vats is more than 30m3.

Part A(2)

(a)Surface treating metals and plastic materials using an electrolytic or chemical process where the aggregated volume of the treatment vats is more than 30m3 and where the activity is carried on at the same installation as one or more activities falling within—

(i)Part A(2) or Part B of Section 2.1;

(ii)Part A(2) or Part B of Section 2.2; or

(iii)Part A(2) or Part B of Section 6.4.

Part B

(a)Any process for the surface treatment of metal which is likely to result in the release into air of any acid-forming oxide of nitrogen and which does not fall within Part A(1) or Part A(2) of this Section.

CHAPTER 3E+W+SMineral Industries

SECTION 3.1E+W+SProduction of Cement and Lime

Part A(1)

(a)Producing cement clinker or producing and grinding cement clinker.

(b)Producing lime—

(i)in kilns or other furnaces with a production capacity of more than 50 tonnes per day; or

(ii)if the activity is likely to involve the heating in any 12-month period of 5,000 or more tonnes of calcium carbonate or calcium magnesium carbonate or both in aggregate.

Part A(2)

(a)Unless falling with Part A(1) of this Section, grinding cement clinker.

(b)Unless falling within Part A(1) of Section 2.1 or 2.2, grinding metallurgical slag in plant with a grinding capacity of more than 250,000 tonnes in any 12-month period.

Part B

(a)Storing, loading or unloading cement or cement clinker in bulk prior to further transportation in bulk.

(b)Blending cement in bulk or using cement in bulk other than at a construction site, including the bagging of cement and cement mixtures, the batching of ready-mixed concrete and the manufacture of concrete blocks and other cement products.

(c)Slaking lime for the purpose of making calcium hydroxide or calcium magnesium hydroxide.

(d)Producing lime where the activity is not likely to involve the heating in any 12-month period of 5,000 or more tonnes of calcium carbonate or calcium magnesium carbonate or both in aggregate.

SECTION 3.2E+W+SActivities Involving Asbestos
Interpretation of Section 3.2E+W+S

1.  In this Section “asbestos” means any of the following fibrous silicates: actinolite, amosite, anthophyllite, chrysotile, crocidolite and tremolite.E+W+S

Part A(1)

(a)Producing asbestos or manufacturing products based on or containing asbestos.

(b)Stripping asbestos from railway vehicles except—

(i)in the course of the repair or maintenance of the vehicle;

(ii)in the course of recovery operations following an accident; or

(iii)where the asbestos is permanently bonded in cement or in any other material (including plastic, rubber or resin).

(c)Destroying a railway vehicle by burning if asbestos has been incorporated in, or sprayed on to, its structure.

Part B

(a)Unless related to an activity falling within Part A(1) of this Section, the industrial finishing of—

(i)asbestos cement;

(ii)asbestos cement products;

(iii)asbestos fillers;

(iv)asbestos filters;

(v)asbestos floor coverings;

(vi)asbestos friction products;

(vii)asbestos insulating board;

(viii)asbestos jointing, packaging or reinforcement material;

(ix)asbestos packing;

(x)asbestos paper or card; or

(xi)asbestos textiles.

SECTION 3.3E+W+SManufacturing Glass and Glass Fibre

Part A(1)

(a)Manufacturing glass fibre.

(b)Manufacturing glass frit or enamel frit and its use in any activity where that activity is related to its manufacture and the aggregate quantity of such substances manufactured in any 12-month period is likely to be 100 or more tonnes.

Part A(2)

(a)Manufacturing glass, unless falling within Part A(1) of this Section, where the melting capacity of the plant is more than 20 tonnes per day.

Part B

Unless falling within Part A(1) or Part A(2) of this Section—

(a)Manufacturing glass at any location with the capacity to make 5,000 or more tonnes of glass in any 12-month period, and any activity involving the use of glass which is carried on at any such location in conjunction with its manufacture.

(b)Manufacturing glass where the use of lead or any lead compound is involved.

(c)Manufacturing any glass product where lead or any lead compound has been used in the manufacture of the glass except—

(i)making products from lead glass blanks; or

(ii)melting, or mixing with another substance, glass manufactured elsewhere to produce articles such as ornaments or road paint.

(d)Polishing or etching glass or glass products in the course of any manufacturing activity if—

(i)hydrofluoric acid is used; or

(ii)hydrogen fluoride may be released into the air.

(e)Manufacturing glass frit or enamel frit and its use in any activity where that activity is related to its manufacture.

SECTION 3.4E+W+SProduction of Other Mineral Fibres

Part A(1)

(a)Unless falling within Part A(1) or Part A(2) of Section 3.3, melting mineral substances in plant with a melting capacity of more than 20 tonnes per day.

(b)Unless falling within Part A(1) of Section 3.3, producing any fibre from any mineral.

SECTION 3.5E+W+SOther Mineral Activities

Part A(2)

(a)Manufacturing cellulose fibre reinforced calcium silicate board using unbleached pulp.

Part B

(a)Unless falling within Part A(1) or Part A(2) of any Section, the crushing, grinding or other size reduction, other than the cutting of stone, or the grading, screening or heating of any designated mineral or mineral product except where the operation of the activity is unlikely to result in the release into the air of particulate matter.

(b)Any of the following activities unless carried on at an exempt location—

(i)crushing, grinding or otherwise breaking up coal, coke or any other coal product;

(ii)screening, grading or mixing coal, coke or any other coal product;

(iii)loading or unloading petroleum coke, coal, coke or any other coal product except unloading on retail sale.

(c)The crushing, grinding or other size reduction, with machinery designed for that purpose, of bricks, tiles or concrete.

(d)Screening the product of any activity described in paragraph (c).

(e)Coating road stone with tar or bitumen.

(f)Loading, unloading or storing pulverised fuel ash in bulk prior to further transportation in bulk.

(g)The fusion of calcined bauxite for the production of artificial corundum.

Interpretation and application of Part BE+W+S

1.  In Part B—E+W+S

coal” includes lignite;

designated mineral or mineral product” means—

(a)

clay, sand or any other naturally occurring mineral other than coal;

(b)

metallurgical slag;

(c)

boiler or furnace ash produced from the burning of coal, coke or any other coal product;

(d)

gypsum which is a by-product of any activity;

exempt location” means—

(a)

any premises used for the sale of petroleum coke, coal, coke or any coal product where the throughput of such substances at those premises in any 12-month period is in aggregate likely to be less than 10,000 tonnes; or

(b)

any premises to which petroleum coke, coal, coke or any coal product is supplied only for use there;

retail sale” means sale to the final customer.

2.  Part B does not apply to any activity carried on underground.E+W+S

SECTION 3.6E+W+SCeramic Production

Part A(1)

(a)Manufacturing ceramic products (including roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain) by firing in kilns, where—

(i)the kiln production capacity is more than 75 tonnes per day; or

(ii)the kiln capacity is more than 4m3 and the setting density is more than 300 kg/m3,

and a reducing atmosphere is used other than for the purposes of colouration.

Part A(2)

(a)Unless falling within Part A(1) of this Section, manufacturing ceramic products (including roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain) by firing in kilns, where—

(i)the kiln production capacity is more than 75 tonnes per day; or

(ii)the kiln capacity is more than 4m3 and the setting density is more than 300 kg/m3.

Part B

(a)Unless falling within Part A(1) or A(2) of this Section, firing heavy clay goods or refractory materials (other than heavy clay goods) in a kiln.

(b)Vapour glazing earthenware or clay with salts.

Interpretation of Part BE+W+S

1.  In Part B—E+W+S

clay” includes a blend of clay with ash, sand or other materials;

refractory material” means material (such as fireclay, silica, magnesite, chrome-magnesite, sillimanite, sintered alumina, beryllia and boron nitride) which is able to withstand high temperatures and to function as a furnace lining or in other similar high temperature applications.

CHAPTER 4E+W+SThe Chemical Industry

Interpretation of Chapter 4E+W+S

1.  In Part A(1) of the Sections of this Chapter, “producing” means producing in a chemical plant by chemical processing for commercial purposes substances or groups of substances listed in the relevant Sections.E+W+S

SECTION 4.1E+W+SOrganic Chemicals
Interpretation of Section 4.1E+W+S

1.  In this Section, “pre-formulated resin or pre-formulated gel coat” means any resin or gel coat which has been formulated before being introduced into polymerisation or co-polymerisation activity, whether or not the resin or gel coat contains a colour pigment, activator or catalyst.E+W+S

Part A(1)

(a)Producing organic chemicals such as—

(i)hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic);

(ii)organic compounds containing oxygen (for example alcohols, aldehydes, ketones, carboxylic acids, esters, ethers, peroxides, phenols, epoxy resins);

(iii)organic compounds containing sulphur (for example sulphides, mercaptans, sulphonic acids, sulphonates, sulphates and sulphones and sulphur heterocyclics);

(iv)organic compounds containing nitrogen (for example amines, amides, nitrous-, nitro- or azo-compounds, nitrates, nitriles, nitrogen heterocyclics, cyanates, isocyanates, di-isocyanates and di-isocyanate prepolymers);

(v)organic compounds containing phosphorus (for example substituted phosphines and phosphate esters);

(vi)organic compounds containing halogens (for example halocarbons, halogenated aromatic compounds and acid halides);

(vii)organometallic compounds (for example lead alkyls, Grignard reagents and lithium alkyls);

(viii)plastic materials (for example polymers, synthetic fibres and cellulose-based fibres);

(ix)synthetic rubbers;

(x)dyes and pigments;

(xi)surface-active agents.

(b)Producing any other organic compounds not described in paragraph (a).

(c)Polymerising or co-polymerising any unsaturated hydrocarbon or vinyl chloride (other than a pre-formulated resin or pre-formulated gel coat which contains any unsaturated hydrocarbon) which is likely to involve, in any 12-month period, the polymerisation or co-polymerisation of 50 or more tonnes of any of those materials, or any combination of those materials in aggregate.

(d)Any activity involving the use in any 12-month period of 1 or more tonnes of toluene di-isocyanate or other di-isocyanate of comparable volatility or, where partly polymerised, the use of partly polymerised di-isocyanates or prepolymers containing 1 or more tonnes of those monomers, if the activity may result in a release into the air which contains such a di-isocyanate monomer.

(e)The flame bonding of polyurethane foams or polyurethane elastomers.

(f)Recovering—

(i)carbon disulphide;

(ii)pyridine or any substituted pyridine.

(g)Recovering or purifying acrylic acid, substituted acrylic acid or any ester of acrylic acid or of substituted acrylic acid.

Part B

(a)Unless falling within Part A(1) of this Section, any activity where the carrying on of the activity by the person concerned at the location in question is likely to involve the use in any 12-month period of 5 tonnes or more of any di-isocyanate or of any partly polymerised di-isocyanate or, in aggregate, of both.

(b)Cutting polyurethane foams or polyurethane elastomers with heated wires.

(c)Any activity for the polymerisation or co-polymerisation of any pre-formulated resin or pre-formulated gel coat which contains any unsaturated hydrocarbon, where the activity is likely to involve, in any 12-month period, the polymerisation or co-polymerisation of 100 or more tonnes of unsaturated hydrocarbon.

(d)Unless falling within Part A(1) of this Section, any activity involving the use of toluene di-isocyanate or partly polymerised di-isocyanate if—

(i)less than 1 tonne of toluene di-isocyanate monomer is likely to be used in any 12-month period; and

(ii)the activity may result in a release into the air which contains toluene di-isocyanate.

SECTION 4.2E+W+SInorganic Chemicals

Part A(1)

(a)Producing inorganic chemicals such as—

(i)gases (for example ammonia, hydrogen chloride, hydrogen fluoride, hydrogen cyanide, hydrogen sulphide, oxides of carbon, sulphur compounds, oxides of nitrogen, hydrogen, oxides of sulphur, phosgene);

(ii)acids (for example chromic acid, hydrofluoric acid, hydrochloric acid, hydrobromic acid, hydroiodic acid, phosphoric acid, nitric acid, sulphuric acid, oleum and chlorosulphonic acid);

(iii)bases (for example ammonium hydroxide, potassium hydroxide, sodium hydroxide);

(iv)salts (for example ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate, cupric acetate, ammonium phosphomolybdate);

(v)non-metals, metal oxides, metal carbonyls or other inorganic compounds (for example calcium carbide, silicon, silicon carbide, titanium dioxide);

(vi)halogens or interhalogen compounds comprising 2 or more of halogens, or any compound comprising one or more of those halogens and oxygen.

(b)Unless falling within any other Section, any manufacturing activity which is likely to result in the release into the air of any hydrogen halide (other than the manufacture of glass or the coating, plating or surface treatment of metal) or which is likely to result in the release into the air or water of any halogen or any of the compounds mentioned in paragraph (a)(vi) (other than the treatment of water).

(c)Unless falling within any other Section, any manufacturing activity involving the use of hydrogen cyanide or hydrogen sulphide.

(d)Unless falling within any other Section, any manufacturing activity (other than the application of a glaze or vitreous enamel) involving the use of, or the use or recovery of, any compound of any of the following elements—

(i)antimony;

(ii)arsenic;

(iii)beryllium;

(iv)gallium;

(v)indium;

(vi)lead;

(vii)palladium;

(viii)platinum;

(ix)selenium;

(x)tellurium;

(xi)thallium,

where the activity may result in the release into the air of any of those elements or compounds or the release into water of any substance listed in paragraph 7 of Part 1 of this Schedule.

(e)Recovering any compound of cadmium or mercury.

(f)Unless falling within any other Section, any manufacturing activity involving the use of mercury or cadmium or any compound of either element or which may result in the release into air of either of those elements or their compounds.

(g)Unless carried on as part of any other activity within this Schedule—

(i)recovering, concentrating or distilling sulphuric acid or oleum;

(ii)recovering nitric acid;

(iii)purifying phosphoric acid.

(h)Unless falling within any other Section, any activity (other than the combustion or incineration of carbonaceous material as defined in the Interpretation of Part A(1) of Section 1.2) which is likely to result in the release into the air of any acid-forming oxide of nitrogen.

(i)Unless carried on as part of any other activity within this Schedule, recovering ammonia.

(j)Extracting any magnesium compound from sea water.

SECTION 4.3E+W+SChemical Fertiliser Production

Part A(1)

(a)Producing (including any blending which is related to their production) phosphorus-, nitrogen- or potassium-based fertilisers (simple or compound fertilisers).

(b)Converting chemical fertilisers into granules.

SECTION 4.4E+W+SPlant Health Products and Biocides

Part A(1)

(a)Producing plant health products or biocides.

(b)Formulating such products if this may result in the release into water of any substance listed in paragraph 7 of Part 1 of this Schedule in a quantity which, in any 12-month period, is greater than the background quantity by more than the amount specified in that paragraph for that substance.

SECTION 4.5E+W+SPharmaceutical Production

Part A(1)

(a)Producing pharmaceutical products using a chemical or biological process.

(b)Formulating such products if this may result in the release into water of any substance listed in paragraph 7 of Part 1 of this Schedule in a quantity which, in any 12-month period, is greater than the background quantity by more than the amount specified in that paragraph for that substance.

SECTION 4.6E+W+SExplosives Production

Part A(1)

(a)Producing explosives.

SECTION 4.7E+W+SManufacturing Activities Involving Carbon Disulphide or Ammonia

Part A(1)

(a)Unless falling within Part A(2) of Section 6.7, any manufacturing activity which may result in the release of carbon disulphide into the air.

(b)Any activity for the manufacture of a chemical which may result in the release of ammonia into the air other than an activity in which ammonia is only used as a refrigerant.

SECTION 4.8E+W+SThe Storage of Chemicals in Bulk

Part B

(a)The storage in tanks, other than in tanks for the time being forming part of a powered vehicle, of any of the substances listed below except where the total storage capacity of the tanks installed at the location in question in which the relevant substance may be stored is less than the figure specified below in relation to that substance—

(i)one or more acrylates, 20 tonnes (in aggregate);

(ii)acrylonitrile, 20 tonnes;

(iii)anhydrous ammonia, 100 tonnes;

(iv)anhydrous hydrogen fluoride, 1 tonne;

(v)toluene di-isocyanate, 20 tonnes;

(vi)vinyl chloride monomer, 20 tonnes;

(vii)ethylene, 8,000 tonnes.

CHAPTER 5E+W+SWaste Management

SECTION 5.1E+W+SIncineration and Co-incineration of Waste
Interpretation of Section 5.1E+W+S

1.  In this Section—E+W+S

co-incineration” means the use of wastes as a regular or additional fuel in a co-incineration plant or the thermal treatment of waste for the purpose of disposal in a co-incineration plant;

co-incineration plant” means any stationary or mobile plant whose main purpose is the generation of energy or production of material products, and—

(a)

which uses wastes as a regular or additional fuel; or

(b)

in which waste is thermally treated for the purpose of disposal.

If co-incineration takes place in such a way that the main purpose of the plant is not the generation of energy or production of material products but rather the thermal treatment of waste, the plant must be regarded as an incineration plant.

This definition covers the site and the entire plant including all co-incineration lines, waste reception, storage, on site pre-treatment facilities, waste-, fuel- and air-supply systems, boiler, facilities for the treatment of exhaust gases, on-site facilities for treatment or storage of residues and waste water, stack devices and systems for controlling incineration operations, recording and monitoring incineration conditions, but does not cover co-incineration in an excluded plant;

excluded plant” means—

(a)

a plant treating only the following wastes—

(i)

vegetable waste from agriculture and forestry,

(ii)

vegetable waste from the food processing industry, if the heat generated is recovered,

(iii)

fibrous vegetable waste from virgin pulp production and from production of paper from pulp, if it is co-incinerated at the place of production and the heat generated is recovered,

(iv)

wood waste with the exception of wood waste which may contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coating, and which includes in particular such wood waste originating from construction and demolition waste,

(v)

cork waste,

(vi)

radioactive waste,

(vii)

[F2animal carcasses as regulated by Regulation (EC) No 1774/2002 of the European Parliament and of the Council of 3rd October 2002 laying down health rules concerning animal by-products not intended for human consumption M4, ] [F2animal carcasses as regulated by Regulation (EC) No 1069/2009;] or

(viii)

waste resulting from the exploration for, and the exploitation of, oil or gas resources from off-shore installations and incinerated on board the installation; or

(b)

an experimental plant used for research, development and testing in order to improve the incineration process and which treats less than 50 tonnes of waste per year;

hazardous waste”, in relation to any solid or liquid waste, has the meaning given in regulation 6 of (in relation to England) the Hazardous Waste (England and Wales) Regulations 2005 M5 or (in relation to Wales) regulation 6 of the Hazardous Waste (Wales) Regulations 2005 M6, but does not include—

(a)

combustible liquid wastes including waste oils, provided that they meet the following criteria—

(i)

the mass content of polychlorinated aromatic hydrocarbons, for example polychlorinated biphenyls or pentachlorinated phenol amounts to concentrations not higher than those set out in the relevant Community legislation,

(ii)

these wastes are not rendered hazardous by virtue of containing other constituents listed in Schedule 2 to (in relation to England) the Hazardous Waste (England and Wales) Regulations 2005, or (in relation to Wales) Schedule 2 to the Hazardous Waste (Wales) Regulations 2005 in quantities or in concentrations which are inconsistent with the achievement of the objectives set out in [F3Article 13] of the Waste Framework Directive, and

(iii)

the net calorific value amounts to at least 30 MJ per kilogramme;

(b)

any combustible liquid wastes which cannot cause, in the flue gas directly resulting from their combustion, emissions other than those from gasoil as defined in Article 1(1) of Council Directive 93/12/EEC relating to the sulphur content of certain liquid fuels M7 or a higher concentration of emissions than those resulting from the combustion of gasoil as so defined;

incineration plant” means any stationary or mobile technical unit and equipment dedicated to the thermal treatment of wastes with or without recovery of the combustion heat generated, including—

(a)

the incineration by oxidation of waste; and

(b)

other thermal treatment processes such as pyrolysis, gasification or plasma processes in so far as the substances resulting from the treatment are subsequently incinerated.

This definition covers the site and the entire incineration plant including all incineration lines, waste reception, storage, on site pre-treatment facilities, waste-fuel and air-supply systems, boiler, facilities for the treatment of exhaust gases, on-site facilities for treatment or storage of residues and waste water, stack, devices and systems for controlling incineration operations, recording and monitoring incineration conditions, but does not cover incineration in an excluded plant;

non-hazardous waste” means waste which is not hazardous waste;

relevant Community legislation” has the same meaning as in Article 3(2)(a)(i) of the Waste Incineration Directive;

waste” means any solid or liquid waste as defined in [F4Article 3(1)] of the Waste Framework Directive.

Part A(1)

(a)The incineration of hazardous waste in an incineration plant.

(b)Unless carried on as part of any other Part A(1) activity, the incineration of hazardous waste in a co-incineration plant.

(c)The incineration of non-hazardous waste in an incineration plant with a capacity of 1 tonne or more per hour.

(d)Unless carried on as part of any other activity in Part A(1), the incineration of hazardous waste in a plant which is not an incineration plant or a co-incineration plant.

(e)Unless carried on as part of any other activity in Part A(1), the incineration of non-hazardous waste in a plant which is not an incineration plant or a co-incineration plant but which has a capacity of 1 tonne or more per hour.

(f)The incineration, other than incidentally in the course of burning landfill gas or solid or liquid waste, of any gaseous compound containing halogens in a plant which is not an incineration plant or a co-incineration plant.

Part A(2)

(a)The incineration of non-hazardous waste in an incineration plant with a capacity of less than 1 tonne per hour.

(b)Unless carried on as part of any other Part A activity, the incineration of non-hazardous waste in a co-incineration plant.

(c)The incineration of animal carcasses in a plant, which is not an incineration plant or a co-incineration plant, with a capacity of more than 10 tonnes per day but less than 1 tonne per hour.

Part B

(a)The incineration of non-hazardous waste in a plant which is—

(i)not an incineration plant or a co-incineration plant, and

(ii)on premises where there is plant, other than incineration plant or co-incineration plant, which has an aggregate capacity of 50 kilogrammes or more per hour but less than 1 tonne per hour.

(b)The cremation of human remains.

Textual Amendments

F2Words in Sch. 1 Pt. 2 Ch. 5 Section 5.1 para. 1 substituted (E.) (23.3.2011) by The Animal By-Products (Enforcement) (England) Regulations 2011 (S.I. 2011/881), reg. 1, Sch. 2 para. 18(3)

F3Words in Sch. 1 Pt. 2 Ch. 5 Section 5.1 substituted (29.3.2011) by The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 5(a)(i) (with regs. 2, 47(2))

F4Words in Sch. 1 Pt. 2 Ch. 5 Section 5.1 substituted (29.3.2011) by The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 5(a)(ii) (with regs. 2, 47(2))

Marginal Citations

M4OJ No L 27, 10.10.2002, p 1.

M7OJ No L 74, 23.3.1993, p 81, as last amended by Directive 1999/32/EC (OJ No L 121, 11.5.1999, p 13).

Application of Part BE+W+S

1.  When determining the extent of an installation carrying on an activity within Part B, any location of the following description is to be ignored: any location where the associated storage or handling of wastes and residues which are to be incinerated as part of that activity is carried on, other than a location where the associated storage or handling of animal remains intended for burning in an incinerator used wholly or mainly for the incineration of such remains or residues from the burning of such remains in such an incinerator is carried on.E+W+S

SECTION 5.2E+W+SDisposal of Waste by Landfill

Part A(1)

(a)The disposal of waste in a landfill—

(i)receiving more than 10 tonnes of waste in any day, or

(ii)with a total capacity of more than 25,000 tonnes,

but excluding disposals in a landfill taking only inert waste.

SECTION 5.3E+W+SDisposal of Waste other than by Incineration or Landfill

Part A(1)

(a)The disposal of hazardous waste (other than by incineration or landfill) in a facility with a capacity of more than 10 tonnes per day.

(b)The disposal of waste oils (other than by incineration or landfill) in a facility with a capacity of more than 10 tonnes per day.

(c)Disposal of non-hazardous waste in a facility with a capacity of more than 50 tonnes per day by—

(i)biological treatment, not being treatment specified in any paragraph other than paragraph D8 of [F5Annex I] to the Waste Framework Directive, which results in final compounds or mixtures which are discarded by means of any of the operations numbered D1 to D12 in that Annex (D8), or

(ii)physico-chemical treatment, not being treatment specified in any paragraph other than paragraph D9 in [F5Annex I] to the Waste Framework Directive, which results in final compounds or mixtures which are discarded by means of any of the operations numbered D1 to D12 in that Annex (for example, evaporation, drying, calcination, etc) (D9).

Textual Amendments

F5Words in Sch. 1 Pt. 2 Ch. 5 Section 5.3 substituted (29.3.2011) by The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 5(b) (with regs. 2, 47(2))

Interpretation and application of Part A(1)E+W+S

1.  In Part A(1)(b) “disposal” means the processing or destruction of waste oil as well as its storage and tipping above ground.E+W+S

2.  Part A(1) does not apply to the treatment, by means of mobile plant, of—E+W+S

(a)waste soil; or

(b)contaminated material, substances or products, for the purpose of remedial action with respect to land or controlled waters.

3.  The reference to a D paragraph number in brackets at the end of Part A(1)(c)(i) and (ii) is a reference to the number of the corresponding paragraph in [F5Annex I] to the Waste Framework Directive (disposal operations).E+W+S

Textual Amendments

F5Words in Sch. 1 Pt. 2 Ch. 5 Section 5.3 substituted (29.3.2011) by The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 5(b) (with regs. 2, 47(2))

SECTION 5.4E+W+SRecovery of Waste

Part A(1)

(a)Recovering by distillation of any oil or organic solvent.

(b)Cleaning or regenerating carbon, charcoal or ion exchange resins by removing matter which is, or includes, any substance listed in paragraphs 6 to 8 of Part 1 of this Schedule.

(c)Unless carried on as part of any other Part A activity, recovering hazardous waste in a plant with a capacity of more than 10 tonnes per day by means of the following operations—

(i)the use principally as a fuel or other means to generate energy (R1),

(ii)solvent reclamation/regeneration (R2),

(iii)recycling/reclamation of inorganic materials other than metals and metal compounds (R5),

(iv)regeneration of acids or bases (R6),

(v)recovering components used for pollution abatement (R7),

(vi)recovery of components from catalysts (R8),

(vii)oil re-refining or other reuses of oil (R9).

Interpretation and application of Part A(1)E+W+S

1.  Part A(1)(a) and (b) do not apply to any of the following activities, except where the activity involves distilling more than 100 tonnes per day—E+W+S

(a)distilling oil for the production or cleaning of vacuum pump oil;

(b)an activity which is ancillary to and related to another activity, whether described in this Schedule or not, which involves the production or use of the substance which is recovered, cleaned or regenerated.

2.  Part A(1) does not apply to the treatment, by means of mobile plant, of—E+W+S

(a)waste soil; or

(b)contaminated material, substances or products, for the purpose of remedial action with respect to land or controlled waters.

3.  The reference to an R paragraph number in brackets at the end of Part A(1)(c)(i) to (vii) is a reference to the number of the corresponding paragraph in [F6Annex II] to the Waste Framework Directive (recovery operations).E+W+S

Textual Amendments

F6Words in Sch. 1 Pt. 2 Ch. 5 Section 5.4 substituted (29.3.2011) by The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 5(c) (with regs. 2, 47(2))

SECTION 5.5E+W+SThe Production of Fuel from Waste

Part A(1)

(a)Making solid fuel (other than charcoal) from waste by any process involving the use of heat.

CHAPTER 6E+W+SOther Activities

SECTION 6.1E+W+SPaper, Pulp and Board Manufacturing Activities

Part A(1)

(a)Producing, in industrial plant, pulp from timber or other fibrous materials.

(b)Producing, in industrial plant, paper and board where the plant has a production capacity of more than 20 tonnes per day.

(c)Any activity associated with making paper pulp or paper, including activities connected with the recycling of paper such as de-inking, if the activity may result in the release into water of any substance in paragraph 7 of Part 1 of this Schedule in a quantity which, in any 12-month period, is greater than the background quantity by more than the amount specified in that paragraph in relation to that substance.

Interpretation of Part A(1)E+W+S

1.  In Part A(1)(c), “paper pulp” includes pulp made from wood, grass, straw or similar materials and references to the making of paper are to the making of any product using paper pulp.E+W+S

Part A(2)

(a)Manufacturing wood particleboard, oriented strand board, wood fibreboard, plywood, cement-bonded particleboard or any other composite wood-based board.

SECTION 6.2E+W+SCarbon Activities

Part A(1)

(a)Producing carbon or hard-burnt coal or electro-graphite by means of incineration or graphitisation.

SECTION 6.3E+W+STar and Bitumen Activities

Part A(1)

(a)The following activities—

(i)distilling tar or bitumen in connection with any process of manufacture, or

(ii)heating tar for the manufacture of electrodes or carbon-based refractory materials,

where the activity is likely to involve the use in any 12-month period of 5 or more tonnes of tar or of bitumen or both in aggregate.

Part B

(a)Any activity not falling within Part A(1) of this Section or of Section 6.2 involving—

(i)heating, but not distilling, tar or bitumen in connection with any manufacturing activity, or

(ii)oxidising bitumen by blowing air through it, at plant where no other activities described in any Section in this Schedule are carried on,

where the carrying on of the activity is likely to involve the use in any 12-month period of 5 or more tonnes of tar or bitumen or both in aggregate.

Interpretation of Part BE+W+S

1.  In Part B, “tar” and “bitumen” include pitch.E+W+S

SECTION 6.4E+W+SCoating Activities, Printing and Textile Treatments

Part A(1)

(a)Applying or removing a coating material containing any tributyltin compound or triphenyltin compound, if carried on at a shipyard or boatyard where vessels of a length of 25 metres or more can be built, maintained or repaired.

(b)Pre-treating (by operations such as washing, bleaching or mercerization) or dyeing fibres or textiles in plant with a treatment capacity of more than 10 tonnes per day.

(c)Treating textiles if the activity may result in the release into water of any substance in paragraph 7 of Part 1 of this Schedule in a quantity which, in any 12-month period, is greater than the background quantity by more than the amount specified in that paragraph in relation to that substance.

Part A(2)

(a)Unless falling within Part A(1) of this Section, surface treating substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating, in plant with a consumption capacity of more than 150 kg per hour or more than 200 tonnes per year.

Part B

(a)Unless falling within Part A(1) or Part A(2) of this Section or Part A(2)(c) of Section 2.1, any process (other than for the re-painting or re-spraying of or of parts of aircraft or road or railway vehicles) for applying to a substrate, or drying or curing after such application, printing ink or paint or any other coating material as, or in the course of, a manufacturing activity, where the process may result in the release into the air of particulate matter or of any volatile organic compound and is likely to involve the use in any 12-month period of—

(i)20 or more tonnes of printing ink, paint or other coating material which is applied in solid form,

(ii)20 or more tonnes of any metal coating which is sprayed on in molten form,

(iii)25 or more tonnes of organic solvents in respect of any cold set web offset printing activity or any sheet fed offset litho printing activity, or

(iv)5 or more tonnes of organic solvents in respect of any activity not mentioned in sub-paragraph (iii).

(b)Unless falling within Part A(2) of this Section, re-painting or re-spraying road vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use of 1 or more tonne of organic solvents in any 12-month period.

(c)Re-painting or re-spraying aircraft or railway vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use in any 12-month period of—

(i)20 or more tonnes of any paint or other coating material which is applied in solid form,

(ii)20 or more tonnes of any metal coatings which are sprayed on in molten form, or

(iii)5 or more tonnes of organic solvents.

Interpretation and application of Part BE+W+S

1.  In Part B—E+W+S

aircraft” includes gliders and missiles;

coating material” means paint, printing ink, varnish, lacquer, dye, any metal oxide coating, any adhesive coating, any elastomer coating, any metal or plastic coating and any other coating material.

2.  The amount of organic solvents used in an activity must be calculated as—E+W+S

(a)the total input of organic solvents into the process, including both solvents contained in coating materials and solvents used for cleaning or other purposes; less

(b)any organic solvents that are removed from the process for re-use or for recovery for re-use.

3.  When determining the extent of an installation carrying on an activity within Part B any location where the associated cleaning of used storage drums prior to painting or their incidental handling in connection with such cleaning is carried on is to be ignored, unless that location forms part of a SED installation.E+W+S

SECTION 6.5E+W+SThe Manufacture of Dyestuffs, Printing Ink and Coating Materials

Part B

(a)Unless falling within Part A(1) or Part A(2) of any other Section—

(i)manufacturing or formulating printing ink or any other coating material containing, or involving the use of, an organic solvent, where the carrying on of the activity is likely to involve the use of 100 or more tonnes of organic solvents in any 12-month period,

(ii)manufacturing any powder for use as a coating material [F7where the process uses lead chromate or triglycidyl isocyanurate and] where there is the capacity to produce 200 tonnes or more of such powder in any 12-month period.

Interpretation of Part BE+W+S

1.  In Part B, “coating material” has the same meaning as in Section 6.4.E+W+S

2.  The amount of organic solvents used in an activity must be calculated as—E+W+S

(a)the total input of organic solvents into the process, including both solvents contained in coating materials and solvents for cleaning or other purposes; less

(b)any organic solvents, not contained in coating materials, that are removed from the process for re-use or for recovery for re-use.

SECTION 6.6E+W+STimber Activities

Part A(1)

(a)Curing, or chemically treating, as part of a manufacturing process, timber or products wholly or mainly made of wood if any substance in paragraph 7 of Part 1 of this Schedule is used.

Part B

(a)Unless falling within Part A(2) of Section 6.1, manufacturing products wholly or mainly of wood at any works if the activity involves a relevant activity and the throughput of the works in any 12-month period is likely to be more than—

(i)10,000 cubic metres in the case of works at which wood is only sawed, or wood is sawed and subjected to excluded activities, or

(ii)1,000 cubic metres in any other case.

Interpretation of Part BE+W+S

1.  In Part B—E+W+S

excluded activity” means any relevant activity (other than sawing) which, ignoring any sawing carried on at the works, would be unlikely to result in the release into the air of any substance in paragraph 6(3) of Part 1 of this Schedule in a quantity capable of causing significant harm;

relevant activity” means the sawing, drilling, sanding, shaping, turning, planing, curing or chemical treatment of wood;

throughput” means the amount of wood which is subjected to a relevant activity, but where wood is subject to 2 or more relevant activities at the same works, the second and any subsequent activity is to be ignored;

wood” includes any product consisting wholly or mainly of wood; and

works” includes a sawmill or any other premises where relevant activities are carried on.

SECTION 6.7E+W+SActivities Involving Rubber

Part A(2)

(a)Manufacturing new tyres (but not remoulds or retreads) if this involves the use in any 12-month period of 50,000 or more tonnes of one or more of the following—

(i)natural rubber,

(ii)synthetic organic elastomers,

(iii)other substances mixed with them.

Part B

(a)Unless falling within Part A(1) or Part A(2) of any Section, the mixing, milling or blending of—

(i)natural rubber, or

(ii)synthetic organic elastomers,

if carbon black is used.

(b)Any activity which converts the product of an activity falling within paragraph (a) into a finished product if related to an activity falling within that paragraph.

SECTION 6.8E+W+SThe Treatment of Animal and Vegetable Matter and Food Industries
Interpretation of Section 6.8E+W+S

1.  In this Section—E+W+S

animal” includes a bird or a fish;

excluded activity” means—

(a)

any activity carried on on a farm or agricultural holding other than—

(i)

the manufacture of goods for sale,

(ii)

the production of compost for growing mushrooms,

(b)

the manufacture or preparation of food or drink for human consumption but excluding—

(i)

the extraction, distillation or purification of animal or vegetable oil or fat otherwise than as an activity incidental to the cooking of food for human consumption,

(ii)

any activity involving the use of green offal or the boiling of blood except the cooking of food (other than tripe) for human consumption,

(iii)

the cooking of tripe for human consumption elsewhere than on premises on which it is to be consumed,

(c)

the fleshing, cleaning and drying of pelts of fur-bearing mammals,

(d)

any activity carried on in connection with the operation of a collection centre for animal by-products,

(e)

any activity for the manufacture of soap not falling within Part A(1) of Section 4.1,

(f)

the storage of vegetable matter not falling within any other Section,

(g)

[F8the cleaning of shellfish shells,]

(h)

the manufacture of starch,

(i)

[F8the processing of animal or vegetable matter at premises authorised for the feeding of a recognised pack of hounds under the Animal By-Products Regulations,]

(j)

the salting of hides or skins, unless related to any other activity listed in this Schedule,

(k)

any activity for composting animal or vegetable matter or a combination of both, except where that activity is carried on for the purposes of cultivating mushrooms,

(l)

any activity for cleaning, and any related activity for drying or dressing, seeds, bulbs, corms or tubers (and “related activity” means an activity being carried on by the same person at the same site),

(m)

the drying of grain or pulses,

(n)

any activity for the production of cotton yarn from raw cotton or for the conversion of cotton yarn into cloth,

(o)

[F9 the drying of green crops];

food” includes—

(a)

drink,

(b)

articles and substances of no nutritional value which are used for human consumption, and

(c)

articles and substances used as ingredients in the preparation of food;

[F10“green crops” means alfalfa (Lucerne), clover, grass, perennial ryegrass, tall fescue and other similar crops;]

green offal” means the stomach and intestines of any animal, other than poultry or fish, and their contents.

Part A(1)

(a)Tanning hides and skins at a plant with a treatment capacity of more than 12 tonnes of finished products per day.

(b)Slaughtering animals at a plant with a carcass production capacity of more than 50 tonnes per day.

(c)Disposing of or recycling animal carcasses or animal waste, other than by rendering or by incineration falling within Section 5.1, at a plant with a treatment capacity exceeding 10 tonnes per day of animal carcasses or animal waste or both in aggregate.

(d)Treating and processing materials intended for the production of food products from—

(i)animal raw materials (other than milk) at a plant with a finished product production capacity of more than 75 tonnes per day; or

(ii)vegetable raw materials at a plant with a finished product production capacity of more than 300 tonnes per day (average value on a quarterly basis).

(e)Treating and processing milk, the quantity of milk received being more than 200 tonnes per day (average value on an annual basis).

(f)Processing, storing or drying by the application of heat the whole or part of any dead animal or any vegetable matter (other than the treatment of effluent so as to permit its discharge into controlled waters or into a sewer unless the treatment involves the drying of any material with a view to its use as animal feedstuff) if the processing, storing or drying—

(i)does not fall within any other Section, or Part A(2) of this Section, and is not an excluded activity; and

(ii)may result in the release into water of any substance in paragraph 7 of Part 1 of this Schedule in a quantity which, in any 12-month period, is greater than the background quantity by more than the amount specified in relation to the substance in that paragraph.

Part A(2)

(a)Disposing of or recycling animal carcasses or animal waste by rendering at plant with a treatment capacity exceeding 10 tonnes per day of animal carcasses or animal waste or both in aggregate.

Part B

(a)Processing, storing or drying by the application of heat the whole or part of any dead animal or any vegetable matter (other than the treatment of effluent so as to permit its discharge into controlled waters or into a sewer unless the treatment involves the drying of any material with a view to its use as animal feedstuff) if the processing, storing or drying—

(i)does not fall within another Section, or Part A(1) or Part A(2) of this Section;

(ii)is not an excluded activity; and

(iii)may result in the release into the air of—

(aa)any substance in paragraph 6(3) of Part 1 of this Schedule, or

(bb)any offensive smell noticeable outside the premises on which the activity is carried on.

(b)Breeding maggots in any case where 5 or more kg of animal matter, vegetable matter or both in aggregate, are introduced into the process in any week.

SECTION 6.9E+W+SIntensive Farming

Part A(1)

(a)Rearing poultry or pigs intensively in an installation with more than—

(i)40,000 places for poultry;

(ii)2,000 places for production pigs (over 30 kg); or

(iii)750 places for sows.

SECTION 7E+W+SSED Activities

Part B

(a)The activities listed in the table below if they are operated above the solvent consumption threshold for the activity.

ActivitySolvent consumption threshold in tonnes/year
Heatset web offset printing15
Publication rotogravure25
Other rotogravure, flexography, rotary screen printing, laminating or varnishing units15
Rotary screen printing on textile or cardboard30
Surface cleaning using substances or preparations which because of their content of volatile organic compounds classified as carcinogens, mutagens or toxic to reproduction under Directive 67/548/EEC on the approximation of laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances M8 are assigned or need to carry one or more of the risk phrases R45, R46, R49, R60 or R61, or halogenated VOCs which are assigned or need to carry the risk phrase R401
Other surface cleaning2
Vehicle coating and vehicle refinishing0.5
Coil coating25
Other coating activities, including metal, plastic, textile (except rotary screen printing on textile), fabric, film and paper coating5
Winding wire coating5
Coating activity applied to wooden surfaces15
Dry cleaning0
Wood impregnation25
Coating activity applied to leather10
Footwear manufacture5
Wood and plastic lamination5
Adhesive coating5
Manufacture of coating preparations, varnishes, inks and adhesives100
Rubber conversion15
Vegetable oil and animal fat extraction and vegetable oil refining activities10
Manufacturing of pharmaceutical products50

Marginal Citations

M8OJ No 196, 16.8.1967, p 1 (OJ/SE Series I Chapter 1967 P, p 19), as last amended by Directive 2006/121/EC (OJ No L 396, 30.12.2006, p 850).

Interpretation and application of Part BE+W+S

1.  For the purposes of Part B—E+W+S

adhesive” means any preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application, which is used to adhere separate parts of a product;

adhesive coating” means any activity in which an adhesive is applied to a surface, excluding the application of adhesive and laminating associated with printing activities;

coating” means any preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application, which is used to provide a decorative, protective or other functional effect on a surface;

coating activity” means any activity in which a single or a multiple application of a continuous film of a coating is applied (including a step in which the same article is printed using any technique) but does not include the coating of substrate with metals by electrophoretic or chemical spraying techniques;

coil coating” means any activity where coiled steel, stainless steel, coated steel copper alloys or aluminium strip is coated with either a film forming or laminate coating in a continuous process;

consumption” means the total input of organic solvents into an installation per calendar year, or any other 12-month period, less any volatile organic compounds that are recovered for reuse;

dry cleaning” means any industrial or commercial activity using volatile organic compounds to clean garments, furnishing and similar consumer goods excluding the manual removal of stains and spots in the textile and clothing industry;

flexography” means a printing activity using an image carrier of rubber or elastic photopolymers on which the printing areas are above the non-printing areas, and liquid inks which dry through evaporation;

footwear manufacture” means any activity of producing complete footwear or parts of footwear;

heat web offset printing” means a web-fed printing activity using an image carrier in which the printing and non-printing area are in the same plane, where—

(a)

the non-printing area is treated to attract water and reject ink,

(b)

the printing area is treated to receive and transmit ink to the surface to be printed, and

(c)

evaporation takes place in the oven where hot air is used to heat the printed material;

ink” means a preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application which is used in a printing activity to impress text or images on to a surface;

laminating associated to a printing activity” means the adhering together of 2 or more flexible materials to produce laminates;

manufacturing of coating preparations, varnishes, inks and adhesives” means the manufacture of coating preparations, varnishes, inks and adhesives as final products and where carried on at the same site, the manufacture of intermediates by the mixing of pigments, resins and adhesive materials with organic solvent or other carrier, including—

(a)

dispersion and pre-dispersion activities,

(b)

viscosity and tint adjustments, and

(c)

operations for filling the final product into its container;

manufacturing of pharmaceutical products” means an activity that involves the—

(a)

chemical synthesis,

(b)

fermentation,

(c)

extraction, or

(d)

formulation and finishing,

of pharmaceutical products and, where carried on at the same site, the manufacture of intermediate products;

the Motor Vehicle Directive” means Council Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers M9;

organic compound” means any compound containing at least the element carbon and one or more of hydrogen, halogens, oxygen, sulphur, phosphorus, silicon or nitrogen, with the exception of carbon oxides and inorganic carbonates and bicarbonates;

organic solvents” means any volatile organic compound which is used alone or in combination with other agents, and without undergoing a chemical change to dissolve raw materials, products or waste materials, as a—

(a)

cleaning agent to dissolve contaminants,

(b)

dissolver,

(c)

dispersion medium,

(d)

viscosity adjuster,

(e)

surface tension adjuster,

(f)

plasticiser, or

(g)

preservative;

other coating activities” means a coating activity applied to—

(a)

trailers, defined in categories O1, O2, O3, and O4 in the Motor Vehicle Directive,

(b)

metallic and plastic surfaces including surfaces of airplanes, ships, trains, or

(c)

textile, fabric, film and paper surfaces;

printing activity” means any activity (not being a step in a coating activity) for reproducing text and/or images in which, with the use of an image carrier, ink is transferred onto any type of surface, including the use of associated varnishing, coating and laminating techniques;

publication rotogravure” means a rotogravure printing activity used for printing paper for magazines, brochures, catalogues or similar products, using toluene-based inks;

reuse” means the use of organic solvents recovered from an installation for any technical or commercial purpose and including use as a fuel but excluding the final disposal of such recovered organic solvent as waste;

rotary screen printing” means a web-fed printing activity in which liquid ink which dries only through evaporation is passed onto the surface to be printed by forcing it through a porous image carrier, in which the printing area is open and the non-printing area is sealed off;

rotogravure” means a printing activity, using a cylindrical image carrier in which the printing area is below the non-printing area and liquid inks which dry through evaporation, and in which the recesses are filled with ink and the surplus is cleaned off the non-printing area before the surface to be printed contacts the cylinder and lifts the ink from the recesses;

rubber conversion” means—

(a)

any activity of mixing, milling, blending, calendering, extrusion or vulcanisation of natural or synthetic rubber, or

(b)

any ancillary operations for converting natural or synthetic rubber into a finished product;

surface cleaning” means any activity, except dry cleaning, using organic solvents to remove contamination from the surface of material including degreasing but excluding the cleaning of equipment; and a cleaning activity consisting of more than one step before or after any other activity is to be considered as one surface cleaning activity;

varnish” means a transparent coating;

varnishing” means an activity by which varnish or an adhesive coating for the purpose of sealing the packaging material is applied to a flexible material;

vegetable oil and animal fat extraction and vegetable oil refining activities” means any activity to extract vegetable oil from seeds and other vegetable matter, the processing of dry residues to produce animal feed, the purification of fats and vegetable oils derived from seeds, vegetable matter or animal matter;

vehicle coating” means a coating activity applied to the following vehicles—

(a)

new cars, defined as vehicles of category M1 in the Motor Vehicle Directive, and of category N1 in so far as they are coated at the same installation as M1 vehicles,

(b)

truck cabins, defined as the housing for the driver, and all integrated housing for the technical equipment, of vehicles of category N2 or N3 in the Motor Vehicle Directive,

(c)

vans and trucks, defined as vehicles of category N1, N2 or N3 in the Motor Vehicle Directive, but not including truck cabins, or

(d)

buses, defined as vehicles in category M2 or M3 in the Motor Vehicle Directive;

vehicle refinishing” means any industrial or commercial coating activity and associated degreasing activities performing—

(a)

the original coating of road vehicles as defined in the Motor Vehicle Directive or part of them with refinishing-type materials, where this is carried on away from the original manufacturing line, or

(b)

the coating of trailers (including semi-trailers) (category O in the Motor Vehicle Directive);

“volatile organic compound” or “VOC” means—

(a)

any organic compound having a vapour pressure of 0.01 or more kPa at 293.15K or having a corresponding volatility under the particular conditions of use, or

(b)

the fraction of creosote which exceeds a vapour pressure of 0.01 kPA at 293.15K;

web-fed” means that the material to be printed is fed to the machine from a reel as distinct from separate sheets;

winding wire coating” means any coating activity of metallic conductors used for winding the coils in transformers and motors, etc;

wood and plastic lamination” means any activity to adhere together wood or plastic to produce laminated products;

wood impregnation” means any activity giving a loading of preservative in timber.

Marginal Citations

M9OJ No L42, 23.2.1970, p 1 (OJ/SE Series I Chapter 1970(I) P, p 82, as last amended by Directive 2006/40/EC (OJ No L 161, 14.6.2006, p 12).

2.  An activity is deemed to be operated above the solvent consumption threshold specified for that activity under Part B if the activity is likely to be operated above that threshold in any 12-month period.E+W+S

3.  An activity listed in Part B includes the cleaning of equipment but, except for a surface cleaning activity, not the cleaning of products.E+W+S

Regulation 4

SCHEDULE 2E+W+SExempt facilities: general

Interpretation: generalE+W+S

1.—(1) In this Schedule—

applicable fee” means—

(a)

a fee imposed by the Agency under paragraph 11 until such date as it is superseded by a charging scheme referred to in that paragraph, or

(b)

on and after that date, the fee prescribed under such a scheme;

date of registration” means the date on which the relevant particulars first appear on the register;

occupier” means a person who is or has been the occupier of the land on which an exempt water discharge activity or exempt groundwater activity is carried on;

operator” means the person carrying on a water discharge activity or groundwater activity;

register” means the register which the exemption registration authority is required to establish and maintain under paragraph 7(1);

registered” means—

(a)

in relation to a waste operation, that the relevant particulars appear on the register during a valid registration period,

(b)

in relation to a water discharge activity or groundwater activity, that the relevant particulars appear on the register,

and “registration” is to be construed accordingly;

relevant particulars” has the meaning given in paragraph 6(3);

“valid registration period”, for an exempt waste operation, means the period of validity of a registration referred to in paragraph 12(1), as read with paragraph 12(2); and

WEEE operation” means a waste operation falling within a description in paragraph T11.

Interpretation: exemption registration authorityE+W+S

2.—(1) Subject to sub-paragraphs (2) and (3), the exemption registration authority in relation to a waste operation falling within a description in Part 1 of Schedule 3 is the Agency.

(2) The exemption registration authority in relation to a waste operation falling within a description in paragraph T3 or T7 is—

(a)for a waste operation carried on by waste mobile plant by an establishment or undertaking whose principal place of business is in England and Wales, the local authority in whose area it has its principal place of business;

(b)for a waste operation carried on by waste mobile plant by an establishment or undertaking whose principal place of business is not in England and Wales, the local authority in whose area the operation is first carried on;

(c)for a waste operation not carried on by waste mobile plant, the local authority in whose area the operation is carried on.

F11(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4) The exemption registration authority in relation to a water discharge activity falling within a description in Part 2 of Schedule 3 is the Agency.

(5) The exemption registration authority in relation to a groundwater activity falling within a description in Part 3 of Schedule 3 is the Agency.

Exempt waste operationsE+W+S

3.—(1) For the purpose of the definition of “exempt waste operation”, the requirements are—

(a)that a waste operation—

(i)falls within a description in Part 1 of Schedule 3, and

(ii)satisfies the general and specific conditions specified in Part 1 of that Schedule in relation to the description;

(b)subject to sub-paragraph (2) and paragraph 9(10) of this Schedule—

(i)that the waste operation is registered, and

(ii)an establishment or undertaking is registered in relation to it; and

(c)that the type and quantity of waste submitted to the waste operation, and the method of disposal or recovery, are consistent with the need to attain the objectives mentioned in [F12Article 13] of the Waste Framework Directive.

(2) The registration requirements in sub-paragraph (1)(b) do not apply in respect of a waste operation carried on by a person who is not an establishment or undertaking.

Exempt water discharge activitiesE+W+S

4.  For the purpose of the definition of “exempt water discharge activity”, the requirements are—

(a)that a water discharge activity—

(i)falls within a description in Part 2 of Schedule 3, and

(ii)satisfies, in relation to an activity of that description, the relevant conditions specified in Part 2 of that Schedule;

(b)that the water discharge activity is registered and, subject to paragraph 9(10) of this Schedule, for a water discharge activity that falls within a description in—

(i)paragraph 1 of Part 2 of Schedule 3, the operator is registered in relation to the activity, or

(ii)paragraph 2 of Part 2 of that Schedule, the occupier is registered in relation to the activity; and

(c)that the water discharge activity does not cause pollution of inland freshwaters, coastal waters or relevant territorial waters.

Exempt groundwater activitiesE+W+S

5.  For the purpose of the definition of “exempt groundwater activity”, the requirements are—

(a)that a groundwater activity—

(i)falls within a description in Part 3 of Schedule 3;

(ii)satisfies, in relation to an activity of that description, the relevant conditions specified in Part 3 of that Schedule;

(b)that the groundwater activity is registered and, subject to paragraph 9(10) of this Schedule, for a groundwater activity that falls within a description in—

(i)paragraph 2 of Part 3 of Schedule 3, the operator is registered in relation to the activity, or

(ii)paragraph 3 of Part 3 of that Schedule, the occupier is registered in relation to the activity; and

(c)that the groundwater activity does not cause pollution of groundwater.

Procedure for registering an exempt facilityE+W+S

6.—(1) An establishment or undertaking seeking to be registered in relation to a waste operation described in Part 1 of Schedule 3, or seeking to renew such a registration, must notify the exemption registration authority of—

(a)the relevant particulars; and

(b)the information specified in sub-paragraph (4).

(2) An occupier or operator seeking to be registered in relation to a water discharge activity described in Part 2 of Schedule 3 or a groundwater activity described in Part 3 of that Schedule must notify the exemption registration authority of the relevant particulars.

(3) The relevant particulars are—

(a)the name and address of—

(i)for a waste operation, the establishment or undertaking, or

(ii)for a water discharge activity or groundwater activity, the occupier or operator;

(b)a description of the waste operation, water discharge activity or groundwater activity;

(c)the place where the waste operation, water discharge activity or groundwater activity is carried on, including—

(i)the post code (if applicable), or

(ii)the Ordnance Survey National Grid reference point; and

(d)if the waste operation is a WEEE operation, the type and quantity of waste subject to the operation.

(4) The information in this sub-paragraph is the name and contact details of an individual officer or employee designated by the establishment or undertaking to be the primary contact for the purposes of registration.

(5) Notification under sub-paragraph (1) or (2) must be in the form specified by the exemption registration authority.

(6) If a notification under sub-paragraph (1) relates to a waste operation that is a WEEE operation, the notification must be accompanied by the applicable fee.

Register of exempt facilitiesE+W+S

7.—(1) Every exemption registration authority must establish and maintain a register of exempt facilities in relation to which it is the exemption registration authority.

(2) Subject to sub-paragraphs (3), (4) and (5), the exemption registration authority must ensure the register contains the relevant particulars—

(a)for an exempt waste operation, within 5 working days after the date that it receives—

(i)notification of the relevant particulars and the information specified in paragraph 6(4), and

(ii)for a WEEE operation, payment of the applicable fee in accordance with paragraph 6(6); and

(b)for an exempt water discharge activity or exempt groundwater activity, within 15 working days after the date that it receives notification of the relevant particulars.

(3) The exemption registration authority must ensure the register is updated to reflect any changes notified under paragraph 13(1) of this Schedule or under Part 2 or 3 of Schedule 3—

(a)for exempt waste operations, within 5 working days after the date that it receives the notification, or

(b)for exempt water discharge activities and exempt groundwater activities, within 15 working days after that date.

(4) The exemption registration authority must not enter the relevant particulars on the register in relation to a WEEE operation until it has carried out an inspection in relation to the operation that complies with the second and third paragraphs of Article 6(2) of the WEEE Directive.

(5) Every exemption registration authority must—

(a)ensure that its register is open to inspection by the public free of charge at all reasonable hours; and

(b)provide reasonable facilities to the public for obtaining a copy of an entry on payment of a reasonable charge.

(6) A register may be kept in any form.

Duty to remove entries from the registerE+W+S

8.—(1) The duty to maintain a register in paragraph 7(1) includes a duty to remove an entry from the register if—

(a)the exemption registration authority becomes aware that the exempt facility is no longer in operation at the place stated in the relevant particulars;

(b)the facility ceases to be an exempt facility; or

(c)in the case of a WEEE operation, the exemption registration authority—

(i)has carried out an inspection in accordance with paragraph 15(2), and

(ii)is not satisfied as to the particulars to be verified pursuant to the third paragraph of Article 6(2) of the WEEE Directive.

(2) If the exemption registration authority removes an entry from the register under sub-paragraph (1), it must notify without delay the occupier, operator or other person registered in relation to the exempt facility.

(3) Sub-paragraph (2) does not apply if the exemption registration authority was notified by the person registered in relation to the facility that the facility is no longer in operation at the place stated in the relevant particulars.

Exclusion from the register of information affecting national securityE+W+S

9.—(1) The appropriate authority may direct the exemption registration authority that, in the interests of national security, specified information or information of a specified description must be excluded from the register.

(2) The exemption registration authority must notify the appropriate authority of any information it excludes from the register pursuant to such a direction.

(3) The appropriate authority may direct the exemption registration authority that, in the interests of national security, before information of a specified description is included on the register, the information must be referred to the appropriate authority for determination as to whether or not it should be excluded from the register.

(4) A determination by the appropriate authority under sub-paragraph (3) to exclude information from the register must be given effect by a direction under sub-paragraph (1).

(5) A person may give a notice to the appropriate authority stating that, in the person's opinion, the inclusion of information on the register would be contrary to the interests of national security.

(6) A notice under sub-paragraph (5) must specify the information and indicate its apparent nature.

(7) A person giving a notice under sub-paragraph (5) must at the same time notify the exemption registration authority.

(8) The exemption registration authority must not include information notified under sub-paragraph (5) on the register unless the appropriate authority determines that it may be included.

(9) A determination by the appropriate authority to exclude information notified under sub-paragraph (5) from the register must be given effect by a direction under sub-paragraph (1).

(10) In relation to an exempt facility that is the subject of a direction or notice given under this paragraph, the requirement in paragraph 3(1)(b), 4(b) or 5(b)—

(a)does not apply where a direction or notice requires the exclusion of all relevant particulars from the register; and

(b)is satisfied where—

(i)a direction under sub-paragraph (1) requires the exclusion of some, but not all, relevant particulars from the register,

(ii)a direction under sub-paragraph (3) requires the exclusion of relevant particulars from the register, or

(iii)a notice under sub-paragraph (5) which is pending a determination under sub-paragraph (8) requires the exclusion of relevant particulars from the register,

and where any relevant particulars which are not subject to a direction or notice are included on the register.

Restrictions on registering exempt waste operations carried on at the same placeE+W+S

10.—(1) An establishment or undertaking may not be registered more than once during a valid registration period in relation to any one waste operation described in Part 1 of Schedule 3 that is carried on or is to be carried on at the same place.

(2) If an establishment or undertaking is registered more than once in contravention of sub-paragraph (1), the second and any subsequent registration is invalid.

(3) Subject to sub-paragraph (7), not more than one establishment or undertaking may be registered at the same time in relation to the same waste operation described in Part 1 of Schedule 3 if the operation is carried on or is to be carried on at the same place.

(4) If more than one establishment or undertaking is registered in contravention of sub-paragraph (3), only the registration specified in sub-paragraph (5) is valid.

(5) The registration in this sub-paragraph is the registration of the establishment or undertaking in respect of which the relevant particulars first appeared on the register in the relevant period.

(6) In this paragraph, “relevant period” means the period during which the relevant particulars appear on the register.

(7) Sub-paragraph (3) does not apply in relation to a waste operation falling within a description in paragraph D2.

Fee for registration relating to WEEE operationsE+W+S

11.—(1) Notwithstanding the power to make a charging scheme under section 41 of the 1995 Act, the Agency may impose a fee in accordance with sub-paragraph (2) until—

(a)the fee is superseded by such a charging scheme; or

(b)1st April 2013,

whichever is the earlier.

(2) The fee referred to in sub-paragraph (1) is £840 in respect of the registration of an establishment or undertaking in relation to a WEEE operation.

Validity of registration of waste operationsE+W+S

12.—(1) A first registration or a registration in relation to a WEEE operation is valid for 3 years.

(2) Any other registration in relation to a waste operation is valid until the end of validity of the first registration.

(3) For the purposes of sub-paragraphs (1) and (2), the period of validity of a registration commences on the date of registration or on the most recent renewal date, as the case may be.

(4) An establishment or undertaking may renew a registration at any time in the month prior to the registration becoming invalid (and the registration procedure specified in paragraph 6 applies in relation to any such renewal).

(5) Where an establishment or undertaking has renewed a registration, the renewal takes effect on the day after the day on which the previous registration becomes invalid.

(6) In this paragraph—

first registration” means—

(a)

the first appearance on the register of relevant particulars for an establishment or undertaking in relation to a waste operation other than a WEEE operation, or

(b)

in the case of a renewal, the first such appearance following the end of validity of the registration, other than the end of validity of the registration of a WEEE operation;

renewal date” means the date that the renewal of a registration takes effect.

Changes to relevant particulars relating to waste operationsE+W+S

13.—(1) An establishment or undertaking registered in relation to a waste operation must notify the exemption registration authority without delay of any changes to—

(a)any of the relevant particulars; and

(b)any of the information specified in paragraph 6(4).

(2) If an establishment or undertaking does not comply with sub-paragraph (1)(a), the exemption registration authority may remove from the register the entry made in respect of the establishment or undertaking.

(3) Notification under sub-paragraph (1) must be in the form specified by the exemption registration authority.

(4) The exemption registration authority must notify the establishment or undertaking in question without delay if it removes an entry from the register pursuant to sub-paragraph (2).

Record keeping for exempt waste operationsE+W+S

14.—(1) This paragraph applies to every exempt waste operation where the waste operation—

(a)is a WEEE operation; or

(b)falls within a description in—

(i)subject to sub-paragraph (2), paragraph U10 or U11,

(ii)paragraph T9,

(iii)paragraph T3 or T7 where the operation is carried on by waste mobile plant.

(2) But it does not apply in relation to an exempt waste operation where—

(a)the waste operation falls within a description in paragraph U10 or U11; and

(b)the establishment or undertaking is required to keep records in relation to the operation and the waste that is subject to that operation under the Nitrate Pollution Prevention Regulations 2008 M10 or the Nitrate Pollution Prevention (Wales) Regulations 2008 M11.

(3) An establishment or undertaking which carries on an exempt waste operation to which this paragraph applies must—

(a)keep [F13chronological ] records of the quantity, nature, origin and, where relevant, the destination and treatment method of all waste disposed of or recovered in the course of that operation; and

(b)where the waste operation falls within a description in paragraph T3 or T7 and is carried on by waste mobile plant, keep records of the places where the operation is carried on.

(4) An establishment or undertaking which carries on an exempt waste operation to which this paragraph applies must—

[F14(a)retain any records that it is required to keep under sub-paragraph (3) for a period of—

(i)3 years, if the operation involves the treatment of hazardous waste;

(ii)otherwise 2 years;]

(b)during that period make those records available to the exemption registration authority on request.

Periodic inspections of establishments and undertakingsE+W+S

15.—(1) Every exemption registration authority must carry out appropriate periodic inspections of establishments and undertakings carrying on exempt waste operations in respect of which it is the exemption registration authority.

(2) If an exempt waste operation involves a WEEE operation, the exemption registration authority must discharge the duty in sub-paragraph (1) by carrying out an inspection that complies with the third and fourth paragraphs of Article 6(2) of the WEEE Directive.

Schedule 2, paragraph 3(1)(a)

SCHEDULE 3E+W+SExempt facilities: descriptions and conditions

PART 1 E+W+SExempt waste operations: descriptions and conditions (specific and general)

CHAPTER 1E+W+SInterpretation of Part 1

InterpretationE+W+S

1.—(1) In this Part—

agricultural land” has the meaning given in section 109(1) of the Agriculture Act 1947 M12 and, for the purposes of the descriptions in paragraphs U10 and U11, this includes land used for the production of timber or other non-food crops;

anaerobic digestion” means the mesophilic and thermophilic biological decomposition and stabilisation of biodegradable waste which—

(a)

is carried on under controlled anaerobic conditions, and

(b)

results in stable sanitised material that can be applied to land for the benefit of agriculture or to improve the soil structure or nutrients in land;

associated storage” means storage of waste that—

(a)

is associated with the use, treatment or disposal of waste, and

(b)

takes place at the place where the use, treatment or disposal is carried on;

bank” means a bank, wall or embankment adjoining or confining, or constructed for the purposes of or in connection with, any channel and includes all land between the bank and low-watermark;

construction” means the carrying on of building or engineering work which includes the repair, alteration, maintenance or improvement of an existing work and preparatory or landscaping works;

impermeable surface” means a surface or pavement constructed and maintained to a standard sufficient to prevent the transmission of liquids beyond the surface;

inland waters” has the meaning given in section 221(1) of the 1991 Act;

place of production” means, in relation to any waste, the place where the waste was originally produced;

Plant Health notice” means a notice served under—

(a)

article 12 of the Plant Health (Phytophthora ramorum) (England) Order 2004 M13,

(b)

article 13 of the Plant Health (Phytophthora ramorum) (Wales) Order 2006 M14,

(c)

article 31 of the Plant Health (Forestry) Order 2005 M15,

(d)

article 32 of the Plant Health (England) Order 2005 M16,

(e)

article 32 of the Plant Health (Wales) Order 2006 M17;

“relevant waste”, where it appears in any paragraph in this Part, means waste that—

(a)

falls within a code specified in the first column of the table in the paragraph, and

(b)

is of a type specified in the second column of the table;

scrap metal” has the meaning given in section 9(2) of the Scrap Metal Dealers Act 1964 M18;

sealed drainage” means a drainage system with an impermeable surface which ensures that—

(a)

no liquid will run off the surface otherwise than via the system, and

(b)

except where they may be lawfully discharged, all liquids entering the system are collected in a sealed sump;

secondary containment” means a bund or any other system for preventing waste which has leaked from the primary container from escaping from the place where it is stored or treated.

(2) In this Part, a 6 digit code used to refer to a waste is a reference to the waste specified by the 6 digit code M19

(a)in England, in the List of Wastes (England) Regulations 2005 M20;

(b)in Wales, in the List of Wastes (Wales) Regulations 2005 M21,

except insofar as the waste specified in this Part in relation to such a code does not include some of the types of waste specified by that code in those Regulations.

(3) Where a bund is used as secondary containment—

(a)the bund must have an impermeable lining and—

(i)have a capacity of not less than 110% of the original container's storage capacity, or

(ii)if there is more than one container within the containment system, have a capacity of not less than 110% of the largest container's storage capacity or 25% of their aggregate storage capacity, whichever is the greater, and

(b)reasonable precautions must be taken to ensure that the capacities specified in paragraph (a) are maintained at all times.

(4) When interpreting this Part, a container, lagoon or other place is secure in relation to waste kept in it if—

(a)all reasonable precautions are taken to ensure that the waste cannot escape from it; and

(b)members of the public are unable to gain access to the waste.

(5) Where a quantity limit is specified in relation to more than one operation (storage, use or treatment) in any one specific or additional condition, that quantity limit applies to all of those operations on an aggregate basis.

(6) Where a waste operation is carried on by waste mobile plant, the quantity limits specified in any specific or additional specific condition in any Chapter of this Part apply in relation to each place where the operation is carried on.

(7) The quantity limits specified in any specific condition in paragraphs U1, U2, U10, U11, U12 and U15 that relate to the use or storage of waste over a specified period apply for that period regardless of whether more than one establishment or undertaking carries on the operation at the same place over that period.

(8) In this Part—

(a)a reference to any of paragraphs U1 to U16 is a reference to a paragraph numbered 1 to 16 in Section 2 of Chapter 2 (use of waste);

(b)a reference to any of paragraphs T1 to T33 is a reference to a paragraph numbered 1 to 33 in Section 2 of Chapter 3 (treatment of waste);

(c)a reference to any of paragraphs D1 to D8 is a reference to a paragraph numbered 1 to 8 in Section 2 of Chapter 4 (disposal of waste);

(d)a reference to any of paragraphs S1 to S3 is a reference to a paragraph numbered 1 to 3 in Section 2 of Chapter 5 (storage of waste).

Marginal Citations

M13S.I. 2004/2590 to which there are amendments not relevant to these Regulations.

M14S.I 2006/1344 (W.134) to which there are amendments not relevant to these Regulations.

M16S.I. 2005/2530 to which there are amendments not relevant to these Regulations.

M17S.I. 2006/1643 (W.158) to which there are amendments not relevant to these Regulations

M19An asterisk following any such code indicates that the waste is considered as a hazardous waste for the purposes of regulation 6(a) of the Hazardous Waste (England and Wales) Regulations 2005 (S.I. 2005/894) (see regulation 3(6)of the List of Waste (England) Regulations 2005 and the List of Waste (Wales) Regulations 2005). See also regulation 3(7) of those Regulations for the effect of the asterisk where the waste comprises or contains one or more dangerous substances.

CHAPTER 2E+W+SUse of waste

SECTION 1E+W+SIntroductory

1.  The descriptions in this Chapter—E+W+S

(a)are set out in the first sub-paragraph of paragraphs U1 to U16; and

(b)include associated storage.

2.  The specific conditions for each description in this Chapter are set out in the third sub-paragraph of paragraphs U1 to U16.E+W+S

3.  The general conditions for all descriptions in this Chapter are as follows—E+W+S

(a)the operation is for the purposes of recovering or reusing the waste, unless otherwise stated in the specific conditions;

(b)the waste used is suitable for the purposes of the operation;

(c)no more waste is used than is necessary to carry on the operation.

SECTION 2E+W+SDescriptions and specific conditions
Use of waste in construction (U1)E+W+S

1.—(1) The use of relevant waste in construction.

(2) The tables specifying relevant waste for the purposes of this paragraph are set out below.

Table 1
CodesWaste typesQuantity limitAdditional specific conditions
010102Waste from mineral non-metalliferous excavation5,000 tonnes
010408Waste gravel and crushed rock other than those mentioned in 010407
010409Waste sand and clays
020202Shellfish shells from which the soft tissue or flesh has been removed only
101208Waste ceramics, bricks, tiles and construction products (after thermal processing)
101314Waste concrete and concrete sludge
170101Concrete
170102Bricks
170103Tiles and ceramics
170107Mixtures of concrete, bricks, tiles and ceramics other than those mentioned in 170106
170506Dredging spoil other than those mentioned in 170505A
170508Track ballast other than those mentioned in 170507
191205Glass
191209Minerals (for example sand, stones)
191212Aggregates only
Table 2
CodesWaste typesQuantity limitAdditional specific conditions
020399, 020401Soil from cleaning and washing fruit and vegetables only1,000 tonnes
170302Bituminous mixtures other than those mentioned in 170301B
170504Soil and stones other than those mentioned in 170503
170506Dredging spoil other than those mentioned in 170505
191302Solid wastes from soil remediation other than those mentioned in 191301
200202Soil and stones
020103Plant tissue wasteB
030101Waste bark, cork and wood onlyB
191207Untreated wood other than those mentioned in 191206 onlyB
200138Untreated wood other than those mentioned in 200137 onlyB
Table 3
CodesWaste typesQuantity limitsAdditional specific conditions
170302Bituminous mixtures other than those mentioned in 17030150,000 tonnesC
170504Road sub base onlyC

(3) For the purposes of this paragraph, the specific conditions are that—

(a)where the relevant waste falls within the first column of a table in sub-paragraph (2), the total quantity of waste used or stored over any 3-year period does not exceed the limit indicated in the third column of that table;

(b)where one or more waste type falling within the first column of any one table in sub-paragraph (2) is used or stored, the total quantity for all the waste types used or stored does not exceed the limit indicated in the third column of that table over any 3-year period;

(c)no waste is stored for longer than 12 months prior to use; and

(d)the operation complies with such of the following additional conditions as are specified in the fourth column of the table and for these purposes—

Athe waste is used only for drainage work carried on for the purposes of the Land Drainage Act 1991 M22, the 1991 Act or the 1995 Act,
Bthe waste is used only for the construction of tracks, paths, bridleways or car parks and must be processed into chipped form prior to use,
Cthe waste is used only for the construction of roads.

Marginal Citations

Use of baled end-of-life tyres in construction (U2)E+W+S

2.—(1) The use of relevant waste in construction.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160103Baled end-of-life tyres only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste used or stored during the construction does not exceed 50 tonnes of baled tyres;

(b)the waste is not used more than once;

(c)the bales comply with standard PAS108 M23; and

(d)no waste is stored for longer than 3 months prior to use.

Marginal Citations

M23PAS 108:2007, Specification for the production of tyre bales for use in construction, ISBN 978 0 580 50349 8.

Use of waste in the construction of entertainment or educational installations etc (U3)E+W+S

3.—(1) The use of relevant waste in the construction of installations, exhibits, sets or demonstrations for entertainment or educational purposes.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
170102Bricks
170103Tiles and ceramics
170201, 200138Wood
170203, 200139Plastic
170401 to 170407, 170411, 200140Metals including their alloys
200101Paper and cardboard
200111Textiles

(3) For the purposes of this paragraph, the specific condition is that the total quantity of waste used or stored prior to use does not exceed 20 tonnes at any one time.

Burning of waste as a fuel in a small appliance (U4)E+W+S

4.—(1) The burning of relevant waste as a fuel in an appliance if the requirements in sub-paragraph (4) are met.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 200201Plant tissue waste only
020107, 170201Untreated wood only
020304Vegetable waste unsuitable for consumption or processing
030101Waste bark and cork
030105Untreated sawdust and wood shavings other than those mentioned in 030104 only
030301Waste bark and wood
030310Fibre rejects (fibrous vegetable waste from virgin pulp preparation or paper pulp production) only
150103Untreated wooden packaging only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste burned over any period of 1 hour is less than 50kg;

(b)the total quantity of waste stored at any one time does not exceed 10 tonnes; and

(c)the waste is stored in a secure place.

(4) The requirements in this sub-paragraph are that—

(a)the appliance has a net rated thermal input of less than 0.4 megawatts; and

(b)where it is used together with other appliances (whether or not it is operated simultaneously with such other appliances), the aggregate net rated thermal input of all the appliances is less than 0.4 megawatts.

Use of waste derived biodiesel as fuel (U5)E+W+S

5.—(1) The use of biodiesel derived from relevant waste as a fuel in a portable generator if the requirements in sub-paragraph (4) are met or in a motor vehicle and the storage of such biodiesel—

(a)in or on a motor vehicle or in such a portable generator; or

(b)at a place that is owned or occupied by the owner or user of the biodiesel.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190210Waste derived biodiesel only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of biodiesel stored in or on a motor vehicle or in a portable generator at any one time does not exceed 1,000 litres;

(b)the total quantity of biodiesel stored at a place owned or occupied by the owner or user of the biodiesel at any one time does not exceed 5,000 litres; and

(c)the biodiesel is stored with secondary containment.

(4) The requirements in this sub-paragraph are that—

(a)the portable generator has a net rated thermal input of less than 0.4 megawatts; and

(b)where it is used together with other portable generators (whether or not it is operated simultaneously with such other generators) the aggregate net rated thermal input of all the generators is less than 0.4 megawatts.

Use of sludge for the purposes of re-seeding a waste water treatment plant (U6)E+W+S

6.—(1) The use of relevant waste at a waste water treatment plant for the purposes of re-seeding the plant.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190805Sludges from treatment of urban waste water
190812Sludges from biological treatment of industrial waste water other than those mentioned in 190811

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste used or stored at the plant at any one time does not exceed 1,000 cubic metres; and

(b)the waste was not produced at the plant.

Use of effluent to clean a highway gravel bed (U7)E+W+S

7.—(1) The use of relevant waste from a water treatment works or a waste water treatment plant to clean a highway gravel bed.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190899Effluent only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste used over any 24-hour period does not exceed 10 cubic metres;

(b)the highway gravel bed has sealed drainage to ensure that the condition in paragraph (c) can be met;

(c)all waste used in and produced by the cleaning operation is collected; and

(d)the waste meets any relevant conditions specified in the environmental permit authorising the operation of the water treatment works or waste water treatment plant.

Use of waste for a specified purpose (U8)E+W+S

8.—(1) The use of relevant waste for a specified purpose.

(2) For the purposes of this paragraph—

(a)the table specifying relevant waste and the limits referred to in sub-paragraph (3)(a) and (b) is set out below;

(b)“specified purpose” is a purpose specified in the third column of the table.

CodesWaste typesSpecified purposeQuantity limit (at any one time)
030105, 191207Wood shavings, woodchip, oversized compost, sawdust onlyUse in horse menages1,000 tonnes
191204Shredded or granulated rubber and end-of-life tyres onlyUse in horse menages1,000 tonnes
191201Shredded paper and cardboardUse as animal bedding100 tonnes
030305, 030311Paper pulp and paper sludge from paper recycling onlyUse as animal bedding100 tonnes
030105, 191207Wood shavings, woodchip, oversized compost, sawdust onlyUse as animal bedding100 tonnes
160103End-of-life tyresUse as a weight on cover sheeting on agricultural premises or use as crash barriers40 tonnes
150102Geotextile bags (flexible intermediate bulk containers) onlyUse as reinforcement in construction100 bags
020202Shellfish shells from which the soft tissue or flesh has been removed onlyUse for ornamental purposes50 tonnes
191205Crushed glass onlyUse for ornamental purposes50 tonnes
200127*, 200128, 080111*, 080112Paints (excluding specialist and industrial paints, wood preservatives, aerosol and spray paints, inks, adhesives and resins)Use as paint1,000 litres
190599Compost produced for the purposes of growing mushrooms onlyUse in growing mushrooms1,000 tonnes
170102, 170904Stones and bricks capable of being used in their existing state onlyUse in construction of buildings, fencing, barriers, containment or similar above ground construction100 tonnes
170201, 191207, 200138Non-hazardous wood including telegraph poles and railway sleepersUse in construction of buildings, fencing, barriers, containment or similar above ground construction100 tonnes
110105*, 110107*, 190902, 190903, 190906Aluminium hydroxide (A1OH) and ferric chloride (FeCl) and sludges/solutions from the treatment of water onlyUse in treating waste water effluent and in water treating processes50 cubic metres
100201, 100202, 170504, 191209Blast furnace slag and stones onlyUse as filter media at waste water treatment works50,000 tonnes

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total amount of waste used or stored at any one time does not exceed the quantity limit specified in the fourth column;

(b)in relation to any relevant waste to which code 160103 applies (end-of-life tyres), within the quantity limit specified for that waste type, not more than 10 tonnes is stored together;

(c)the waste is not treated or required to be treated prior to use; and

(d)in relation to any relevant waste to which code 110105* (aluminium hydroxide),110107* (ferric chloride), 190902, 190903 or 190906 (sludges/solutions from the treatment of water) applies, the waste is stored—

(i)with secondary containment, and

(ii)in a location with sealed drainage.

Use of waste to manufacture finished goods (U9)E+W+S

9.—(1) The use of relevant waste to manufacture finished goods.

(2) The table specifying relevant waste for the purposes of this paragraph and the quantity limits referred to in sub-paragraph (3)(a) is set out below.

CodesWaste typesQuantity limit (at any one time)Additional specific conditions
100101, 100102Ash only500 tonnesA
101208Ceramics100 tonnesA
101112, 150107, 191205, 200102Glass5,000 tonnesA
100105Gypsum only500 tonnesA
200199Lion faeces only5 tonnesB
120101, 120103, 150104, 160117, 160118, 191001, 191002, 191202, 191203, 200140Metals500 tonnesA
150101, 191201, 200101Paper and cardboard15,000 tonnesC, D
070213, 120105, 150102, 191204, 200139Plastics500 tonnesE
191204Rubber only30 tonnesE, F
F15. . .F15. . .F15. . .F15. . .
040221, 040222, 150109, 191208, 200110, 200111Textiles1,000 tonnesB
030105, 030301, 150103, 191207, 200138Wood, bark, cork, sawdust, shavings, cuttings, particle board100 tonnesB

(3) For the purposes of this paragraph, the specific conditions are that —

(a)the total quantity of waste used or stored at any one time does not exceed the quantity limit specified in the third column of the table in sub-paragraph (2);

(b)the waste is stored in a secure location at the place where the manufacturing is carried on;

(c)the operation does not involve any activity falling within a description in Part A(1) or Part A(2) of Part 2 of Schedule 1; and

(d)the operation complies with such of the following additional specific conditions as are specified in the fourth column of the table—

Athe waste is stored at a location with sealed drainage,
Bthe waste is stored indoors or in a secure container,
Cthe waste is stored in a baled form, in a container or indoors,
Dwithin the quantity limit specified in the third column of the table and notwithstanding additional specific condition C, up to 1,000 tonnes may be stored outdoors so long as it is stored in an enclosure designed and maintained to prevent the escape of litter,
Ethe waste is not subject to heat treatment,
Fthe total quantity of waste stored together does not exceed 10 tonnes.

(4) For the purposes of this paragraph, “finished goods” means goods that are ready for use by an end consumer without any further processing.

Textual Amendments

F15Sch. 3 Pt. 1 Ch. 2 Section 2 para. U9 entry omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 7(a) (with regs. 2, 47(2))

Spreading waste on agricultural land to confer benefit (U10)E+W+S

10.—(1) The spreading of relevant waste on agricultural land to confer benefit to the land for the purposes of providing, maintaining or improving the soil's ability to provide a growing medium by adding nutrients, lime or biomass.

(2) The table specifying relevant waste for the purposes of this paragraph and the quantity and storage limits referred to in sub-paragraph (3) is set out below.

CodesWaste typesQuantity limitStorage limit (at any one time)PeriodAdditional specific conditions
010102, 010408, 170504Chalk only50 tonnes per hectare200 tonnes12 monthsA
F16. . .F16. . .F16. . .F16. . .F16. . .F16. . .
020401, 020399Soil from cleaning and washing fruit and vegetables only50 tonnes per hectare200 tonnes12 monthsA
020199Milk from agricultural premises only50 cubic metres of diluted milk per hectare200 tonnes24 hoursA, B, E
100101Ash from wood chip boilers produced pursuant to an operation described in paragraph U4 only1 tonne per hectare10 tonnes12 monthsA
170506Dredging spoil (other than those mentioned in 170505) generated from the creation or maintenance of habitats, ditches or ponds within parks, gardens, fields and forests only150 tonnes per hectare1,250 tonnes12 monthsC
020199Spent compost from the growing of mushrooms compost only50 tonnes per hectare500 tonnes12 monthsA
190599Compost produced pursuant to a treatment described in paragraph T23 or T26 only50 tonnes per hectare500 tonnes12 monthsA

190604

Digestate produced pursuant to a treatment described in paragraph T24 or T25 only

50 tonnes per hectare

200 tonnes12 monthsA
190812Waste consisting of biobed or biofilter material produced pursuant to a treatment described in paragraph T32 only

50 tonnes per hectare

200 tonnes

12 months

A, D

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste spread does not exceed the limit specified in the third column of the table in sub-paragraph (2) over the period specified in the fifth column;

(b)the total quantity of waste stored at any one time does not exceed the limit specified in the fourth column of the table;

(c)subject to additional specific conditions D and E in sub-paragraph (f), where they apply, no waste is stored for longer than 12 months prior to spreading;

(d)the waste is stored in a secure location prior to spreading;

(e)at the time the spreading begins—

(i)the land has not been frozen for 12 hours or more in the preceding 24 hours,

(ii)the land is not waterlogged, frozen or snow-covered; and

(f)the operation complies with such of the following additional specific conditions as are specified in the sixth column of the table—

A

the location of any waste which is stored or land which is spread is at

least 10 metres from a watercourse and 50 metres from a spring, well or borehole,

Bprior to spreading, the waste is diluted with not less than an equal quantity of water or slurry and the land is spread not more than once in any 4-week period,
Cthe waste is spread adjacent to the place from which it was dredged,
Dthe waste is stored for at least 12 months prior to spreading,
Ethe waste is not stored for longer than 24 hours prior to spreading.

Textual Amendments

F16Sch. 3 Pt. 1 Ch. 2 Section 2 para. U10 entry omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 7(b) (with regs. 2, 47(2))

Spreading waste on non-agricultural land to confer benefit (U11)E+W+S

11.—(1) The spreading of relevant waste on land that is not agricultural land for the purposes of providing, maintaining or improving the soil's ability to provide a growing medium by adding nutrients, lime or biomass.

(2) The table specifying relevant waste for the purposes of this paragraph and the quantity and storage limits referred to in sub-paragraph (3) is set out below.

CodesWaste typesQuantity limit (over 12 months)Storage limit (at any one time)Additional specific conditions
010102, 010408, 170504Chalk only50 tonnes per hectare200 tonnesA
F17. . .F17. . .F17. . .F17. . .F17. . .
020202Shellfish shells from which the soft tissue or flesh has been removed only50 tonnes per hectare200 tonnesA
020399, 020401Soil from cleaning and washing fruit and vegetables only50 tonnes per hectare200 tonnesA
100101Ash from wood chip boilers produced pursuant to an operation described in paragraph U4 only1 tonne per hectare10 tonnesA
170506Dredging spoil (other than those mentioned in 170505) generated from the creation or maintenance of habitats, ditches or ponds within parks, gardens, fields and forests only150 tonnes per hectare1,250 tonnesB
020199Spent compost from the growing of mushrooms only50 tonnes per hectare500 tonnesA
190599Compost produced pursuant to a treatment described in paragraph T23 or T26 only50 tonnes per hectare500 tonnesA
190604Digestate produced pursuant to a treatment described in paragraph T24 or T25 only50 tonnes per hectare200 tonnesA
190812Waste consisting of biobed or biofilter material produced pursuant to a treatment described in paragraph T32 only50 tonnes per hectare200 tonnesA, C
200108Coffee grounds only50 tonnes per hectare200 tonnesA

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste spread does not exceed the limit specified in the third column of the table in sub-paragraph (2) over any 12-month period;

(b)the total quantity of waste stored at any one time does not exceed the limit specified in the fourth column of the table;

(c)subject to additional specific condition C in sub-paragraph (f), where it applies, no waste is stored for longer than 12 months prior to spreading;

(d)the waste is stored in a secure location prior to spreading;

(e)at the time the spreading begins—

(i)the land has not been frozen for 12 hours or more in the preceding 24 hours,

(ii)the land is not waterlogged, frozen or snow-covered; and

(f)the operation complies with such of the following additional specific conditions as are specified in the fifth column of the table—

Athe location of any waste which is stored or land which is spread is at least 10 metres from a watercourse and 50 metres from a spring, well or borehole,
Bthe waste is spread adjacent to the place from which it was dredged,
Cthe waste is stored for at least 12 months prior to spreading.

Textual Amendments

F17Sch. 3 Pt. 1 Ch. 2 Section 2 para. U11 entry omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 7(b) (with regs. 2, 47(2))

Use of mulch (U12)E+W+S

12.—(1) The use of relevant waste as a mulch.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 191207, 200201Untreated wood and plant matter

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste used or stored over any period of 1 month does not exceed 100 tonnes; and

(b)the waste is stored in a secure location prior to use.

Spreading of plant matter to confer benefit (U13)E+W+S

13.—(1) The spreading of relevant waste at the place of production to confer benefit.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 020107, 020304, 200201Plant tissue only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste spread over any 12-month period does not exceed 50 tonnes per hectare;

(b)at the time the spreading begins—

(i)the land has not been frozen for 12 hours or more in the preceding 24 hours,

(ii)the land is not waterlogged, frozen or snow-covered; and

(c)except for waste which is spread on the banks of the waters from which it was produced, no waste is spread within 50 metres of any watercourse, spring, well or borehole.

Incorporation of ash into soil (U14)E+W+S

14.—(1) The incorporation of ash which is relevant waste into soil resulting from a qualifying operation.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 020107, 200201Ash from burning of plant tissue only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste incorporated into soil does not exceed 10 tonnes per hectare; and

(b)ashes of burnt cereal, straw or cereal stubble are not allowed, without reasonable excuse, proof of which lies on the establishment or undertaking carrying on the operation, to remain on the soil for longer than 24 hours after the commencement of the burning but must be incorporated into the soil—

(i)within that period, or

(ii)in a case where, having regard to wind conditions to do so would be likely to cause nuisance, as soon as conditions allow.

(4) For the purposes of this paragraph, a “qualifying operation” is one that—

(a)involves the burning of cereal straw or cereal stubble;

(b)falls within a description in paragraph D7; and

(c)complies with the specific conditions specified in that paragraph and the general conditions specified in Chapter 3.

Pig and poultry ash (U15)E+W+S

15.—(1) The spreading of relevant waste on agricultural land at the place of production.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190112Ash from the incineration of pig and poultry carcasses only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste spread over any 12-month period does not exceed 150kg per hectare;

(b)the waste is mixed with an equal volume or more of manure or slurry prior to spreading;

(c)the waste is stored in a secure place prior to spreading;

(d)the location of the waste which is stored or land which is spread is at least—

(i)10 metres from a watercourse,

(ii)50 metres from a spring, well or borehole; and

(e)at the time of the spreading—

(i)the land has not been frozen for 12 hours or more in the preceding 24 hours,

(ii)the land is not waterlogged, frozen or snow-covered.

Use of depolluted end-of-life vehicles for vehicle parts (U16)E+W+S

16.—(1) The use of relevant waste for vehicle parts.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types

160106

End-of-life vehicles, containing neither liquids nor other hazardous components
160122Non-hazardous components from end-of-life vehicles only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)no more than two depolluted end-of-life vehicles are stored at any one time;

(b)in relation to relevant waste to which code 160122 applies (non-hazardous components from end-of-life vehicles), the total quantity of waste stored at any one time does not exceed 5 cubic metres;

(c)the waste is stored in a secure place;

(d)the waste is stored on an impermeable surface; and

(e)the operation is for the purposes of re-using the waste.

(4) For the purposes of this paragraph and in relation to an end-of-life vehicle, “depolluted” means that the vehicle has been subjected to all of the operations described in paragraph 3 of Annex 1 to the End-of-Life Vehicles Directive.

CHAPTER 3E+W+STreatment of waste

SECTION 1E+W+SIntroductory

1.  The descriptions in this Chapter—E+W+S

(a)are set out in the first sub-paragraph of paragraphs T1 to T33; and

(b)include associated storage.

2.  The specific conditions for each description in this Chapter are set out in the third sub-paragraph of paragraphs T1 to T33.E+W+S

3.  The general condition for the descriptions in this Chapter is that the operation is for the purposes of recovering the waste, unless otherwise stated in the specific conditions.E+W+S

SECTION 2E+W+SDescriptions and specific conditions
Cleaning, washing, spraying or coating relevant waste (T1)E+W+S

1.—(1) The treatment of relevant waste by cleaning, washing, spraying or coating it, subject to sub-paragraph (4).

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
150105Composite packaging
160120, 150107, 170202, 191205, 200102Glass
150101Paper and cardboard packaging
020104, 070213, 150102, 160119, 170203, 200139Plastic
150109Textile packaging

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated over any 7-day period does not exceed 300 tonnes;

(b)subject to paragraph (e), the total quantity of waste stored at any one time does not exceed 300 tonnes;

(c)the waste is stored and treated in a location with sealed drainage;

(d)no waste is stored for longer than 3 months prior to treatment;

(e)where the waste consists of containers that have been used to contain a dangerous substance, the total quantity of waste stored does not exceed 1 tonne over any 7-day period; and

(f)the waste is not contaminated by more than 1% of its original volume prior to treatment.

(4) The description in sub-paragraph (1) does not include cleaning, washing, spraying or coating of any relevant waste if this falls within Part B of section 6.4 of Part 2 of Schedule 1.

(5) In this paragraph, “dangerous substance” has the meaning given in regulation 2(1) of the Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 M24.

(6) References in this paragraph to quantity limits by weight include the weight of any contamination.

Marginal Citations

Recovery of textiles (T2)E+W+S

2.—(1) The treatment of relevant waste by laundering or otherwise cleaning it.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
191208Textiles
200110Clothes
200111Textiles

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 20,000 tonnes; and

(b)the waste is treated and stored at a location with sealed drainage.

Treatment of waste metals and metal alloys by heating for the purposes of removing grease etc (T3)E+W+S

3.—(1) The treatment of relevant waste for the purposes of removing grease, oil or any other non-metallic contaminant by heating it in an appliance where the requirements of sub-paragraph (4) are met using a process that is not an excluded process.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160117Ferrous metal
160118Non ferrous metal
191001Iron and steel waste
191002Non ferrous waste
191202Ferrous metal
191203Non ferrous metal
200140Metals

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored or treated at any one time does not exceed 10 tonnes; and

(b)the waste is stored in a secure location with sealed drainage.

(4) The requirements in this sub-paragraph are that—

(a)the appliance has a net rated thermal input of less than 0.2 megawatts; and

(b)where it is used together with other appliances (whether or not it is operated simultaneously with such other appliances), the aggregate net rated thermal input of all the appliances is less than 0.2 megawatts.

(5) The processes that are excluded processes for the purposes of sub-paragraph (1) are—

(a)the removal by heat of plastic or rubber covering from scrap cable or any asbestos contaminant;

(b)a process that is an activity listed in Section 2.1 (other than paragraph (d) of Part B) of Part 2 of Schedule 1 involving the heating of iron, steel or ferrous alloy; and

(c)a process that is an activity described in Part A(1) or A(2) of Section 2.2 of Part 2 of Schedule 1 involving the heating of any non-ferrous metal or non-ferrous metal alloy.

Preparatory treatments (baling, sorting, shredding etc) (T4)E+W+S

4.—(1) The treatment of relevant waste by baling, sorting, shredding, pulverising, densifying, crushing or compacting it.

(2) The table specifying relevant waste for the purposes of this paragraph and the quantity limits referred to in sub-paragraph (3) is set out below.

CodesWaste typesTreatment limit (over 7 days)Storage limit (at any one time)
150104, 200140Cans and foils only100 tonnes where treatment is carried on outdoors500 tonnes
500 tonnes where treatment is carried on indoors
070213, 150102, 150105Food and drink cartons only100 tonnes where treatment is carried on outdoors500 tonnes
3,000 tonnes where treatment is carried on indoors
150107, 160120, 170202, 191205, 200102Glass5,000 tonnes5,000 tonnes
030308, 030307, 150101, 191201, 200101Paper and cardboard (excluding food and drink cartons)500 tonnes where treatment is carried on outdoors15,000 tonnes
3,000 tonnes where treatment is carried on indoors
020104, 070213, 120105, 150102, 160119, 170203, 191204, 200139Plastic100 tonnes where treatment is carried on outdoors500 tonnes
3000 tonnes where treatment is carried on indoors
040222, 150109, 191208, 200110, 200111Textiles and clothes1,000 tonnes where treatment is carried on outdoors1,000 tonnes
3,000 tonnes where treatment is carried on indoors

(3) For the purposes of this paragraph, the specific conditions are that—

(a)subject to paragraph (d), the total quantity of waste treated over any 7-day period does not exceed the limit specified in the third column of the table in sub-paragraph (2);

(b)the total quantity of waste stored at any one time does not exceed the limit specified in the fourth column of the table;

(c)no waste is stored for longer than 12 months;

(d)where the treatment involves pulverising waste—

(i)the total quantity of waste treated over any 7-day period does not exceed 5 tonnes,

(ii)the treatment is carried on indoors;

(e)where the treatment involves densifying waste, the treatment does not involve the application of heat;

(f)the treatment and storage are carried on in a secure place;

(g)the waste arrives at the place where the operation is carried on unmixed with any other type of waste;

(h)the waste is treated and stored in an unmixed state; and

(i)in relation to relevant waste to which codes 030308, 030307, 150101, 191201, 200101 apply (paper and cardboard)—

(i)the waste is stored in a baled form, in a container or indoors,

(ii)within the storage limit specified in the fourth column of the table, up to 1,000 tonnes may be stored outdoors so long as it is stored in an enclosure designed and maintained to prevent the escape of litter.

Screening and blending of waste (T5)E+W+S

5.—(1) The treatment of relevant waste by screening and blending it for the purposes of producing an aggregate or soil and associated prior treatment.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
010408Waste gravel and crushed rocks other than those mentioned in 010407
010409Waste sand and clays
020202Shellfish shells from which the soft tissue or flesh has been removed only
030101Waste bark and cork
030301Waste bark and wood
100101Bottom ash, slag and boiler dust (excluding boiler dust mentioned in 100104)
100115Bottom ash, slag and boiler dust from co-incineration other than those mentioned in 100114
170101Concrete
170102Bricks
170103Tiles and ceramics
170107Mixtures of concrete, bricks, tiles and ceramics other than those mentioned in 170106
170201Wood
170302Bituminous mixtures other than those mentioned in 170301
170504Soil and stones other than those mentioned in 170503
170506Dredging spoil other than those mentioned in 170505
170508Track ballast other than those mentioned in 170507
190599Compost produced pursuant to a treatment described in paragraphs T23 or T26 only
191205Glass
191209Aggregates only
191212Gypsum recovered from construction materials only
191302Solid wastes from soil remediation other than those mentioned in 191301
191304Sludges from soil remediation other than those mentioned in 191303
200202Soil and stones

(3) For the purposes of this paragraph, the specific conditions are that—

(a)in relation to any relevant waste to which code 170302 applies (bituminous mixtures other than those mentioned in 170301) where the treatment is for the purposes of manufacturing roadstone, the total quantity of waste treated or stored over any 3-year period does not exceed 50,000 tonnes;

(b)in relation to relevant waste not covered by paragraph (a), the total quantity of waste treated or stored over any 3-year period does not exceed 5,000 tonnes;

(c)no waste is stored for longer than 12 months; and

(d)the treatment is carried on at the place—

(i)of production, or

(ii)where the treated waste is to be used.

(4) In this paragraph, “associated prior treatment” means crushing relevant waste for the purposes of screening or blending it but does not include crushing of any relevant waste which falls within Part B of Section 3.5 of Part 2 of Schedule 1 or within paragraph T7.

Treatment of waste wood and waste plant matter by chipping, shredding, cutting or pulverising (T6)E+W+S

6.—(1) The treatment of relevant waste by chipping, shredding, cutting or pulverising it.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 200201Plant tissue waste
030101,030301, 170201

Wood

150103Untreated wooden packaging only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored over any 7-day period does not exceed 500 tonnes; and

(b)no waste is stored for longer than 3 months after treatment.

Treatment of waste bricks, tiles and concrete by crushing, grinding or reducing in size (T7)E+W+S

7.—(1) The treatment of relevant waste by crushing, grinding or reducing it in size but not including any treatment activity covered by paragraph (c) in Part B of Section 3.5 of Part 2 of Schedule 1.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
170101Concrete
170102Bricks
170103Tiles and ceramics
170107Mixtures of concrete, bricks, tiles and ceramics (other than those mentioned in 170106*)

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated over any period of 1 hour does not exceed 20 tonnes;

(b)the total quantity of waste stored at any one time does not exceed 200 tonnes;

(c)the waste is stored in a secure place prior to treatment;

(d)the treatment is carried on—

(i)at the place of production, or

(ii)at the place where the treated waste is to be used; and

(e)the operation does not result in the release into the air of a substance listed in paragraph 6(3) of Part 1 of Schedule 1 except in a quantity which is so trivial that it is incapable of causing pollution or its capacity to cause pollution is insignificant.

Mechanical treatment of end-of-life tyres (T8)E+W+S

8.—(1) The treatment of end-of-life tyres, including such tyres in a shredded or granulated form, that are relevant waste by a relevant treatment operation and associated prior treatment.

(2) The table specifying relevant waste and relevant treatment operations for the purposes of this paragraph is set out below.

CodesWaste typesRelevant treatment operation
160103End-of-life tyresGranulating, baling, peeling, shaving, shredding and re-treading of tyres
191204Shredded or granulated end-of-life tyres onlyGranulating

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored or treated over any 7-day period does not exceed—

(i)60 tonnes of truck tyres, or

(ii)40 tonnes of any other tyres;

(b)within the limits in paragraph (a), the total quantity stored together does not exceed 10 tonnes;

(c)in relation to any relevant treatment operation that is granulating, the treatment is carried on indoors; and

(d)in relation to any relevant treatment operation that is re-treading, the treatment is for the purposes of re-using the waste.

(4) In this paragraph, “associated prior treatment” means cleaning tyres and separating rims from them prior to treatment.

Recovery of scrap metal (T9)E+W+S

9.—(1) The recovery of scrap metal consisting of relevant waste by—

(a)sorting, grading, shearing by manual feed, baling or crushing it; or

(b)cutting it with hand-held equipment.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020110Waste metal
150104Metallic packaging
160117, 191202Ferrous metal
160118, 191203Non ferrous metal
170401Copper, bronze, brass
170402Aluminium
170403Lead
170404Zinc
170405Iron and steel
170406Tin
170407Mixed metals
170411Cables other than those mentioned in 170410
200140Metals

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 1,000 tonnes;

(b)within the limit in paragraph (a), the total quantity of any cables stored or treated does not exceed 50 tonnes;

(c)no waste is stored for longer than 24 months;

(d)the recovery is carried on at a location with sealed drainage; and

(e)the height of any pile or stack of waste does not exceed 5 metres.

Sorting mixed waste (T10)E+W+S

10.—(1) The sorting of one type of relevant waste from one or more other types of relevant waste.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
150101, 200101Paper and cardboard
150102, 200139Plastics
150104, 200140Metals
150105Composite packaging
150106Mixed packaging
150107, 200102Glass
150109, 200110, 200111Textiles and clothing only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored at any one time does not exceed 10 tonnes;

(b)the total quantity of waste treated over any 7-day period does not exceed 10 tonnes; and

(c)the waste is stored in a secure place.

Repair or refurbishment of WEEE (T11)E+W+S

11.—(1) The treatment of WEEE that is relevant waste by repairing or refurbishing it, including any prior dismantling.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160211*WEEE containing CFCs, HCFCs and HFCs
160213*WEEE containing hazardous components other than those mentioned in 160209 to 160212
160214WEEE other than those mentioned in 160209 to 160213
160216Components removed from discarded equipment other than those mentioned in 160215
200123*WEEE containing CFCs
200135*WEEE other than those mentioned in 200121 and 200123 containing hazardous components
200136WEEE other than those mentioned in 200121, 200123, and 200135

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored over any 12-month period does not exceed 1,000 tonnes;

(b)the best available treatment, recovery and recycling techniques are used when treating the waste;

(c)the operation meets the technical requirements specified in Annex III to the WEEE Directive;

(d)in relation to any relevant waste falling within codes 160211* (WEEE containing CFCs, HCFCs and HFCs) or 200123* (WEEE containing CFCs), the waste is stored in such a manner so as to prevent the release of CFCs, HCFCs and HFCs;

(e)the waste is stored in such a manner that its environmentally sound reuse or recycling is not hindered; and

(f)the operation is for the purposes of—

(i)re-using the WEEE for its original purpose, or

(ii)re-using any dismantled components for their original purpose.

(4) In this paragraph—

(a)best available treatment, recovery and recycling techniques” has the meaning given in the document published jointly by the Department for Environment, Food and Rural Affairs, the Welsh Assembly Government and the Scottish Executive on 27th November 2006, entitled “Guidance on Best Available Treatment, Recovery and Recycling Techniques (BATRRT) and Treatment of Waste Electrical and Electronic Equipment (WEEE)”M25;

(b)CFCs” means chlorofluorocarbons;

(c)HCFCs” means hydrochlorofluorocarbons;

(d)HFCs” means hydrofluorocarbons; and

(e)treatment” does not include the degassing or capture of ozone depleting substances.

Marginal Citations

M25Available on the Defra website - http://www.defra.gov.uk/environment/waste/producer/electrical/documents/weee-batrrt-guidance.pdf. See paragraphs 22 to 36.

Manual treatment of waste (T12)E+W+S

12.—(1) The manual treatment of relevant waste by a relevant treatment operation.

(2) The table specifying—

(a)relevant waste for the purposes of this paragraph and relevant treatment operations;

(b)the quantity limits referred to in sub-paragraph (3)(a); and

(c)the additional specific conditions referred to in sub-paragraph (3)(c),

is set out below.

CodesWaste typesRelevant treatment operationQuantity limits (at any one time)Additional specific conditions
200199Bicycles onlySorting, repairing or refurbishing100 tonnesA
200110, 200111Clothing, fabrics, carpets onlySorting, repairing or refurbishing100 tonnesA
200138, 200139, 200140Coat hangers onlySorting and dismantling100 tonnesB
200140Domestic pots and pans onlySorting and dismantling100 tonnes
200199Footwear onlySorting, repairing or refurbishing100 tonnesA
200307Furniture onlySorting, repairing or refurbishing100 tonnesA
200138, 200139, 200140Garden tools onlySorting, repairing or refurbishing100 tonnesA
200138, 200139, 200140Lock gates onlySorting and dismantling100 tonnes
200307Mattresses onlySorting and dismantling5 tonnesB, C
170102, 170201, 170904, 200138Stone, bricks, wood onlySorting, repairing or refurbishing500 tonnesA
200137*, 200138, 200140Telegraph poles onlySorting and dismantling100 tonnesB
170201, 170202, 170203, 200102, 200138, 200139, 200140Windows, doors onlySorting, repairing or refurbishing100 tonnesA
170201, 170202, 170203, 200102, 200138, 200139, 200140Windows, doors onlySorting and dismantling10 tonnesB
150103Wooden pallets onlySorting, repairing or refurbishing100 tonnesA
150103Wooden pallets onlySorting and dismantling100 tonnesB

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed the limit specified in the fourth column of the table in sub-paragraph (2);

(b)subject to additional specific condition B in sub-paragraph (c), where it applies, no waste is stored for longer than 2 years; and

(c)the operation complies with such of the following additional specific conditions as is specified in the fifth column of the table—

Athe operation is for the purposes of reusing the waste,
Bno waste is stored for longer than 12 months,
Ctreatment and storage are carried on indoors.
Treatment of waste food (T13)E+W+S

13.—(1) The treatment of waste food that is relevant waste by decanting or unwrapping it, bulking it up and sorting it.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
F18. . .F18. . .
020304, 020501, 020601, 020704Materials unsuitable for consumption or processing F19...
200199Non liquid foods unsuitable for consumption or processing F20... only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 30 tonnes;

(b)the treatment and storage are carried on—

(i)indoors,

(ii)in a secure place;

(c)no waste is stored for longer than 7 days;

(d)in relation to relevant waste specified in the first row of the table in sub-paragraph (2) (milk only), the operation is carried on in a dairy which has sealed drainage; and

(e)any resultant waste packaging is bulked up for the purposes of recovery.

Textual Amendments

F18Sch. 3 Pt. 1 Ch. 3 Section 2 para. T13 table entry omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 8(a)(i) (with regs. 2, 47(2))

F19Words in Sch. 3 Pt. 1 Ch. 3 Section 2 para. T13 table omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 8(a)(ii) (with regs. 2, 47(2))

F20Words in Sch. 3 Pt. 1 Ch. 3 omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 8(a)(iii) (with regs. 2, 47(2))

Crushing and emptying waste vehicle oil filters (T14)E+W+S

14.—(1) The treatment of waste vehicle oil filters consisting of relevant waste by crushing and emptying them.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160107*Oil filters

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored after treatment does not exceed 1 tonne of crushed and emptied oil filters at any one time;

(b)the treatment is carried on at the place of production;

(c)the equipment used to treat the waste is—

(i)designed for the purposes of crushing oil filters,

(ii)designed and maintained to ensure that oil does not escape during treatment; and

(d)the treatment takes place as soon as practicable after the oil filter is removed from a vehicle.

Treatment of waste aerosol cans (T15)E+W+S

15.—(1) The treatment of empty used waste aerosol cans consisting of relevant waste by puncturing and crushing them.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160504*Aerosol cans containing residues of or contaminated by dangerous substances only
160505Aerosol cans only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored in any 12-month period does not exceed 3,000 cans;

(b)the waste is stored in a secure location in vented containers prior to treatment;

(c)the treatment and storage are carried on—

(i)at the place of production,

(ii)in a well-ventilated area; and

(d)the equipment used to treat the waste is designed for that purpose.

Treatment of waste toner cartridges by sorting, dismantling, cleaning or refilling (T16)E+W+S

16.—(1) The treatment of waste toner cartridges consisting of relevant waste by sorting, dismantling, cleaning or refilling them.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
080318Waste printing toner other than those mentioned in 080317
150102Plastic packaging
160216Cartridges taken from discarded equipment other than those mentioned in 160215 only
200139Plastics

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 50,000 cartridges; and

(b)the treatment is carried on—

(i)indoors,

(ii)at a location with sealed drainage.

Crushing waste fluorescent tubes (T17)E+W+S

17.—(1) The crushing of relevant waste for the purposes of volume reduction prior to collection.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
200121*Fluorescent tubes only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste crushed over any period of 24 hours does not exceed 3 tonnes;

(b)the crushing is carried on at the place of production;

(c)the equipment used for crushing is designed for the purposes of crushing and volume reduction;

(d)the mercury concentration in any resultant emissions does not exceed 25 microgrammes per cubic metre; and

(e)any glass or mercury released after crushing is stored in a secure container under weatherproof covering.

Dewatering using flocculants (T18)E+W+S

18.—(1) The treatment of relevant waste by dewatering using flocculants.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
010409Clay effluent resulting from the manufacture of ceramics only
080120Water based paint wash waters only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored or treated at any one time does not exceed 30,000 litres; and

(b)the waste is stored in a container with secondary containment.

Physical treatment of waste edible oil and fat to produce biodiesel (T19)E+W+S

19.—(1) The physical treatment of relevant waste for the purposes of producing biodiesel.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
200125Edible oil and fat

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 5,000 litres;

(b)the waste is treated and stored in a container with secondary containment;

(c)no waste is stored for longer than 3 months; and

(d)the operation is for the purposes of reusing the waste.

Treatment of waste at a water treatment works (T20)E+W+S

20.—(1) The treatment of relevant waste at a water treatment works.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190902Sludges from water clarification
190903Sludges from decarbonation
190906Solutions and sludges from regeneration of ion exchangers
190999Waste water and bore hole flushings only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated at the works over any period of 12 months does not exceed 10,000 cubic metres; and

(b)the waste is treated and stored in a secure location with sealed drainage.

Recovery of waste at a waste water treatment works (T21)E+W+S

21.—(1) The recovery of relevant waste at a waste water treatment works.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
190801Screenings
190802Sewage grit (waste from desanding) only
190805Sludges from treatment of urban waste water
190899Centrate liquor only
190902Sludges from water clarification
190903Sludges from decarbonation
190906Solutions and sludges from regeneration of ion exchangers
200304Septic tank sludge
200306Waste from sewage cleaning
200399Cesspool waste and other sewage sludge only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste brought to the works over any period of 12 months does not exceed 100,000 cubic metres; and

(b)the waste is treated and stored in a secure location with sealed drainage.

Treatment of animal by-product waste at a collection centre (T22)E+W+S

F2122.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F21Sch. 3 Pt. 1 Ch. 3 Section 2 para. T22 omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 8(b) (with regs. 2, 47(2))

Aerobic composting and associated prior treatment (T23)E+W+S

23.—(1) The treatment of relevant waste by aerobic composting and associated prior treatment.

(2) The tables specifying relevant waste for the purposes of this paragraph are set out below.

Table 1
CodesWaste types
170506Plant tissue waste from inland waters only
020103, 200201Plant tissue waste
020106Horse manure and farmyard manure only
020107Biodegradable waste from forestry only
200101Paper and cardboard
200201Biodegradable waste plant matter only
Table 2
CodesWaste types
020202Animal tissue waste
020501, 020601Materials unsuitable for consumption or processing
200108Biodegradable kitchen and canteen waste
200302Biodegradable waste from markets only

(3) For the purposes of this paragraph, the specific conditions are—

(a)the total quantity of waste treated or stored at any one time does not exceed 80 tonnes where—

(i)the operation is carried on at the place of production, and

(ii)the treated waste is being or is to be used at that place;

(b)the total quantity of waste treated or stored at any one time does not exceed 60 tonnes where—

(i)the waste is produced at a place other than where the operation is carried on, or

(ii)the treated waste is not to be used at the place where the operation is carried on;

(c)within the quantity limits in paragraphs (a) and (b), the waste does not consist at any one time of more than the following quantities—

(i)10 tonnes of paper or cardboard,

(ii)20 tonnes of manure,

(iii)10 tonnes of any relevant waste listed in Table 2;

(d)in relation to relevant waste listed in Table 1, no waste is stored for longer than 1 month prior to treatment;

(e)in relation to relevant waste listed in Table 2, no waste is stored for longer than 7 days prior to treatment;

(f)no waste is stored for a period of longer than 12 months after treatment; and

(g)the treatment results in a stable sanitised material that can be applied to land for the benefit of agriculture or to improve the soil structure or nutrients in land.

(4) In this paragraph—

aerobic composting” means the autothermic and thermophilic biological decomposition and stabilisation of biodegradable waste under controlled conditions that are aerobic;“associated prior treatment” means screening, chipping, shredding, cutting, pulverising or sorting waste for the purposes of aerobic composting.

Anaerobic digestion at premises used for agriculture and burning of resultant biogas (T24)E+W+S

24.—(1) The treatment by anaerobic digestion of relevant waste at premises used for agriculture and associated prior treatment and the burning of any resultant biogas.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 020107, 170506, 200201Plant tissue waste
020106Horse and farmyard manure, slurry only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 1,250 cubic metres;

(b)the minimum retention time for the waste in the digester is 28 days; and

(c)any gas resulting from the operation is collected and then burnt in an appliance—

(i)where the requirements of sub-paragraph (5) are met, and

(ii)the appliance is for the purposes of producing energy.

(4) In this paragraph, “associated prior treatment” means screening, chipping, shredding, cutting, pulverising or sorting waste for the purposes of anaerobic digestion.

(5) The requirements in this sub-paragraph are that—

(a)the appliance has a net rated thermal input of less than 0.4 megawatts; and

(b)where it is used together with other appliances (whether or not it is operated simultaneously with such other appliances), the aggregate net rated thermal input of all the appliances is less than 0.4 megawatts.

Anaerobic digestion at premises not used for agriculture and burning of resultant biogas (T25)E+W+S

25.—(1) The treatment by anaerobic digestion of relevant waste at premises not used for agriculture and associated prior treatment and the burning of any resultant biogas.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020103, 020107, 170506, 200201Plant tissue waste
020106Horse and farmyard manure only
200101Paper and cardboard
200108Biodegradable kitchen and canteen waste
020202Animal tissue waste
020501, 020601Materials unsuitable for consumption or processing
200302Biodegradable waste from markets only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 50 cubic metres;

(b)the minimum retention time for the waste in the digester is 28 days; and

(c)any gas resulting from the operation is collected and then burnt in an appliance—

(i)where the requirements of sub-paragraph (5) are met, and

(ii)the appliance is for the purposes of producing energy.

(4) In this paragraph, “associated prior treatment” means screening, chipping, shredding, cutting, pulverising or sorting waste for the purposes of anaerobic digestion.

(5) The requirements in this sub-paragraph are that—

(a)the appliance has a net rated thermal input of less than 0.4 megawatts; and

(b)where it is used together with other appliances (whether or not it is operated simultaneously with such other appliances), the aggregate net rated thermal input of all the appliances is less than 0.4 megawatts.

Treatment of kitchen waste in a wormery (T26)E+W+S

26.—(1) The treatment in a wormery of relevant waste originating from a kitchen.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
200101Paper and cardboard
200108Biodegradable kitchen and canteen waste

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated over any 12-month period does not exceed 6 tonnes; and

(b)the treatment results in a stable sanitised vermicompost that can be applied to land for the benefit of agriculture or to improve the soil structure or nutrients in land.

Treatment of sheep dip for disposal (T27)E+W+S

27.—(1) The treatment of used organophosphate sheep dip consisting of relevant waste for the purposes of its disposal.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020109Organophosphate sheep dip only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)total quantity of waste treated or stored over any 24-hour period does not exceed 8,000 litres;

(b)the waste is treated using organophosphate-degrading enzyme in accordance with the enzyme manufacturer's instructions;

(c)the treatment and storage are carried on at the place of production; and

(d)the treatment is carried on in a secure sheep dip bath.

Sorting and de-naturing of controlled drugs for disposal (T28)E+W+S

28.—(1) The treatment of controlled drugs consisting of relevant waste by sorting and de-naturing them prior to their disposal.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
180109Medicines from natal care, diagnosis, treatment or prevention of disease in humans
180208Medicines from research, diagnosis, treatment or prevention of disease involving animals
200132Medicines separately collected as municipal waste

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored at any one time does not exceed 1 cubic metre;

(b)the treatment and storage are carried on at the place of production; and

(c)no waste is stored for longer than 6 months.

(4) In this paragraph, “controlled drug” means a controlled drug specified in Schedules 1 to 5 to the Misuse of Drugs Regulations 2001 M26.

Marginal Citations

M26S.I. 2001/3998; relevant amending instruments are S.I. 2003/1432, 2005/1653, 2005/3372 and 2007/2154.

Treatment of non-hazardous pesticide washings by carbon filtration for disposal (T29)E+W+S

29.—(1) The treatment of non-hazardous pesticide washings that are relevant waste by carbon filtration for the purposes of disposal.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020109, 160509Non-hazardous pesticide washings only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored over any 24-hour period does not exceed 8,000 litres;

(b)the treatment and storage are carried on at the place of production; and

(c)the treatment is carried on in a location with sealed drainage.

Recovery of silver (T30)E+W+S

30.—(1) The recovery of silver from relevant waste produced in connection with printing or photographic processes.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
090107Photographic film or paper containing silver or silver compounds

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored or treated at any one time does not exceed 1,000 litres; and

(b)the treatment and storage are carried on in a location with sealed drainage.

Recovery of monopropylene glycol from aircraft antifreeze fluids (T31)E+W+S

31.—(1) The recovery of monopropylene glycol by filtering and distilling relevant waste collected following de-icing of aircraft.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
160115Antifreeze fluids other than those mentioned in 160114

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored over any 7-day period does not exceed 250 cubic metres;

(b)the waste is treated in a location with sealed drainage;

(c)the operation is carried on at the place where the waste is produced; and

(d)the waste is stored with secondary containment.

Treatment of waste in a biobed or biofilter (T32)E+W+S

32.—(1) The treatment of relevant waste in a lined biobed or above ground biofilter.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
020109, 160509Non-hazardous pesticide washings only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated or stored over any 12-month period does not exceed 15,000 litres;

(b)the biobed or biofilter is located at a secure place that is—

(i)at least 10 metres from a watercourse,

(ii)at least 50 metres from a spring or well or from any borehole not used to supply water for domestic or food production purposes,

(iii)at least 250 metres from any borehole used to supply water for domestic or food production purposes,

(iv)not within a zone defined by a 50-day travel time for groundwater to reach a groundwater abstraction that is used to supply water for domestic or food production purposes;

(c)the biobed or biofilter —

(i)is designed and maintained for the treatment operation,

(ii)has an impermeable lining; and

(d)the treatment is carried on at the place of production.

Recovery of central heating oil by filtration (T33)E+W+S

33.—(1) The recovery of central heating oil by filtering relevant waste.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types
130701*Central heating oil only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste treated over any 7-day period does not exceed 400 litres;

(b)the waste is stored with secondary containment;

(c)the treatment is carried on at a location with sealed drainage; and

(d)the operation is for the purposes of reusing the waste.

CHAPTER 4E+W+SDisposal of waste

SECTION 1E+W+SIntroductory

1.  The descriptions in this Chapter—E+W+S

(a)are set out in the first sub-paragraph of paragraphs D1 to D8; and

(b)include associated storage.

2.  The specific conditions for each description in this Chapter are set out in the third sub-paragraph of paragraphs D1 to D8.E+W+S

3.  The general condition for all descriptions in this Chapter is that the operation is carried on at the place of production.E+W+S

SECTION 2E+W+SDescriptions and specific conditions
Deposit of waste from dredging of inland waters (D1)E+W+S

1.—(1) The deposit of relevant waste arising from the dredging of inland waters and associated screening and dewatering.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types
170506Dredging spoil other than those mentioned in 170505

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste deposited or treated over any 12-month period does not exceed 50 cubic metres for each metre of land on which the waste is deposited; and

(b)the waste is deposited at the closest possible point to where the waste was produced on—

(i)the bank of the inland waters from which the waste was produced, or

(ii)such width of land adjoining the inland waters so as to enable the waste to be removed and deposited by mechanical means in one operation.

Deposit of waste from a railway sanitary convenience (D2)E+W+S

2.—(1) The deposit of relevant waste on to a railway track.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types
200399Wastes from railway sanitary conveniences only

(3) For the purposes of this paragraph, the specific condition is that the total quantity of waste deposited per discharge does not exceed 25 litres.

(4) In this paragraph, “railway sanitary convenience” means a sanitary convenience or sink forming part of a vehicle used for the carriage of passengers on a railway.

Deposit of waste from a portable sanitary convenience (D3)E+W+S

3.—(1) The deposit of relevant waste by burying it.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types
200399Waste from portable sanitary conveniences only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste deposited over any 12-month period does not exceed 1 cubic metre; and

(b)no waste is deposited within—

(i)10 metres of any watercourse,

(ii)50 metres of any spring, well or borehole.

Deposit of agricultural waste consisting of plant tissue under a Plant Health notice (D4)E+W+S

4.—(1) The deposit of agricultural waste that is relevant waste.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types
020103Plant tissue waste

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the deposit is required under a Plant Health notice;

(b)where waste is deposited into a pile, the pile—

(i)does not exceed 250 tonnes, and

(ii)is not immediately adjacent to another pile of the same type of waste;

(c)at the time the deposit is made—

(i)the land has not been frozen for 12 hours or more in the preceding 24 hours,

(ii)the land is not waterlogged, frozen or snow-covered; and

(d)no waste is deposited within—

(i)10 metres of any watercourse,

(ii)50 metres of any spring, well or borehole.

Depositing samples of waste for the purposes of testing or analysing them (D5)E+W+S

5.—(1) The deposit and subsequent storage of relevant samples of waste at any place where the samples are being or are to be tested or analysed.

(2) For the purposes of sub-paragraph (1), “relevant samples of waste” means samples of waste that are taken—

(a)in the exercise of any power under—

(i)the 1993 Act,

(ii)the Control of Pollution Act 1974 M27,

(iii)section 5 of the Control of Pollution (Amendment) Act 1989 M28,

(iv)the 1990 Act,

(v)the 1991 Act,

(vi)the Water Industry Act 1991 M29,

(vii)the Waste Electrical and Electronic Equipment Regulations 2006 M30,

(viii)the Producer Responsibility Obligations (Packaging Waste) Regulations 2007  M31,

(ix)regulation 88 of the Waste Batteries and Accumulators Regulations 2009 M32;

(b)by or on behalf of the holder of an environmental permit;

(c)by or on behalf of a person carrying on in relation to the waste—

(i)an operation described in this Part, or

(ii)an excluded waste operation;

(d)by or on behalf of the owner or occupier of the land from which the samples are taken;

(e)by or on behalf of any person to whom section 34(1) or (1A) of the 1990 Act M33 applies in connection with that person's duties under that section;

(f)by or on behalf of any person to whom the Transfrontier Shipment of Waste Regulations 2007 M34 apply in connection with that person's powers under those Regulations; or

(g)for the purposes of research.

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste deposited or stored at any one time does not exceed 10 tonnes; and

(b)the waste is not stored for longer than 12 months or such other period as may be ordered in court proceedings.

Marginal Citations

M30)S.I. 2006/3289, amended by S.I. 2007/3545; there are other amending instruments but none is relevant.

M31)S.I. 2007/871, to which there are amendments not relevant to these Regulations.

M331990 c. 43; section 34(1) was amended by S.I. 2000/1973 and 2007/3538. Section 34(1A) was inserted by paragraph 1(6) of Schedule 2 to S.I. 2009/1799.

M34S.I. 2007/1711, to which there are amendments not relevant to these Regulations.

Disposal by incineration (D6)E+W+S

6.—(1) The disposal by incineration of the waste described in sub-paragraph (2) in an incinerator where the requirements in sub-paragraph (4) are met.

(2) The waste described in this paragraph is the waste mentioned in Article 2(2)(a)(i) to (viii) of the Waste Incineration Directive, but excluding the waste mentioned in sub-paragraph (vi) (radioactive waste) of that Article.

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored prior to incineration does not exceed 5 tonnes at any one time; and

(b)the operation is carried on by the person who produced the waste.

(4) The requirements in this sub-paragraph are—

(a)the incinerator has a capacity of less than 50kg per hour and a net rated thermal input of less than 0.4 megawatts; and

(b)where it is used together with other incinerators (whether or not it is operated simultaneously with such other incinerators), the aggregate net rated thermal input of all the incinerators is less than 0.4 megawatts.

Burning waste in the open (D7)E+W+S

7.—(1) The burning of relevant waste on open land.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types
020103, 020107, 200201Plant tissue
030105Sawdust, shavings and cuttings from untreated wood only
030301Waste bark and wood

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste burned over any period of 24 hours does not exceed 10 tonnes;

(b)the total quantity of waste stored at any one time does not exceed 20 tonnes; and

(c)no waste is stored for longer than 6 months.

Burning waste at a port under a Plant Health notice (D8)E+W+S

8.—(1) The burning of relevant waste at a port.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

Codes Waste types

020103, 020107,

020304, 200201

Plant tissue only
150103, 200138Wood used to wedge or support parts of cargo, including packing material, spacers and pallets only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste burned or stored over any period of 24 hours does not exceed 10 tonnes;

(b)the burning and storage of waste takes place in a secure place at the port where the waste was unloaded; and

(c)the burning is required under a Plant Health notice.

(4) In this paragraph, “port” means a port appointed by order made under section 19 of the Customs and Excise Management Act 1979 M35.

Marginal Citations

CHAPTER 5E+W+SStorage of waste other than at the place of production pending its recovery or reuse

SECTION 1E+W+SIntroductory

1.  The descriptions in this Chapter are set out in the first sub-paragraph of paragraphs S1 to S3.E+W+S

2.  The specific conditions for each of the descriptions in this Chapter are set out in the third sub-paragraph of paragraphs S1 to S3.E+W+S

3.  The general conditions for all descriptions in this Chapter are that the storage is carried on—E+W+S

(a)at a place other than the place of production, and

(b)pending the recovery of the waste.

SECTION 2E+W+SDescriptions and specific conditions
Storage of waste in secure containers (S1)E+W+S

1.—(1) The storage of relevant waste at a place in a secure container or containers for the purposes of its recovery elsewhere.

(2) The table specifying relevant waste for the purposes of this paragraph and the storage limits referred to in sub-paragraph (3) is set out below.

CodesWaste typesStorage limit (at any one time)

130109* to 130113*

130204* to 130208*

130401* to 130403*

130701*

Waste oils [F223 cubic metres]
150101, 200101Cartons400 cubic metres
150102, 200139Plastics and plastic packaging400 cubic metres
150104, 200140Cans and foil only400 cubic metres
150101, 200101Paper and cardboard400 cubic metres
150107, 200102Glass400 cubic metres
150109, 200110, 200111Textiles and clothes400 cubic metres
150202*Absorbents, filter materials (including oil filters not otherwise specified) wiping cloths, protective clothing contaminated by dangerous substances3 cubic metres
150203Absorbents, filter materials, wiping cloths and protective clothing other than those mentioned in 1502023 cubic metres
160107*Oil filters3 cubic metres

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored at any one time does not exceed the limit specified in the third column in the table in sub-paragraph (2);

(b)the total quantity of storage containers at the storage place at any one time does not exceed 20;

(c)no waste is stored for longer than 12 months;

(d)the person storing the waste is the owner of the container or containers or has the consent of the owner; and

(e)in respect of any waste oils and waste to which code 160107* applies (oil filters), the waste is stored with secondary containment.

Textual Amendments

F22Words in Sch. 3 Pt. 1 Ch. 5 Section 2 para. 1(2) table substituted (6.4.2010) by The Environmental Permitting (England and Wales) (Amendment) Regulations 2010 (S.I. 2010/676), regs. 1, 2

Storage of waste in a secure place (S2)E+W+S

2.—(1) The storage of relevant waste in a secure place for the purposes of its recovery elsewhere.

(2) The table specifying relevant waste for the purposes of this paragraph and the quantity limits referred to in sub-paragraph (3) is set out below.

CodesWaste typesStorage limit (at any one time)PeriodAdditional specific conditions
161002Aqueous paint related waste only1,000 litres6 monthsA, C

160601*, 160602*,

160603*, 160604,

160605, 200133*,

200134

Batteries10 tonnes6 monthsA, B
150104, 200140Cans and foil only500 tonnes12 months
140601*CFCs, HCFCs and HFCs18 tonnes6 monthsA, C

170101, 170102,

170103,170107,

170202, 170203, 170401 to 170407, 170504, 170604, 170802

Construction and demolition waste capable of being used in its existing state (non hazardous) only100 tonnes12 months
200125Edible oil and fat only5,000 tonnes12 monthsA, C
100207*Electric arc furnace dust only2,500 tonnes3 monthsD, E, F
020104Farm plastics (non packaging) only500 tonnes12 monthsD

070213, 150101, 150102, 150105,

200139

Food and drink cartons only500 tonnes12 months
101112, 150107, 160120, 170202, 191205, 200102Glass5,000 tonnes12 monthsB
020102Mammalian protein only60,000 tonnes12 monthsD
020202Mammalian tallow only45,000 tonnes12 monthsD
200307Mattresses only5 tonnes3 monthsD
010408, 191209Marble chips only5,000 tonnes12 months
020304Olive pulp/pellet only5,000 tonnes3 monthsB, C, E
200127*, 200128, 080111*, 080112Paints (excluding specialist and industrial paints, wood preservatives, aerosol and spray paints, inks, adhesives and resins) pending reuse as paints only10,000 litres6 monthsA, C
150101, 191201, 200101, 030308, 030307Paper and cardboard (excluding food and drink cartons) only15,000 tonnes12 monthsJ, K
090107, 090108Photographic films and papers50 tonnes12 monthsJ
070213, 120105, 150102, 160119, 191204, 200139Plastic500 tonnes12 months
100101Poultry litter ash only3,000 tonnes12 monthsD, E

080318, 150102,

160216, 200139

Printer cartridges only5,000 units6 monthsD
170301*, 170302, 170504Road planings, waste road chippings, road sub-base only500 tonnes12 months
020110, 160117, 160118, 191203, 170401, 170402, 170403, 170404, 170405, 170406, 170407, 191202, 170411Scrap metal15,000 tonnes6 monthsB, E
090110, 090111*, 090112Single use cameras400 cubic metres6 months
020401, 020399Soils from cleaning fruit and vegetables only100 tonnes6 months
100316, 100405*, 100504, 100511, 100604, 100811, 100899Solder metal, skimmings, ashes and residues100 tonnes3 monthsG
140602*, 140603*, 200113*Solvents and solvent mixtures5 cubic metres6 monthsA, C
100101, 100102, 100105, 100115Synthetic gypsum and pulverised fuel ash only2,500 tonnes3 monthsD, E, F
040222, 150109, 191208, 200110, 200111Textiles and clothes1,000 tonnes12 months
160103, 191204Tyres, tyre chip and crumb40 tonnes3 monthsH
110113*, 120301*, 160708*Waste cleaning solution containing 2% sodium metasilicate and 1-2% waste oil only3 tonnes3 monthsA, C
160211*,160213*, 160214, 160216, 200121*, 200123*, 200135*, 200136WEEE400 cubic metres6 monthsI

030301, 150102,

150103, 200138

Wine bottle corks only500 tonnes12 months
030105, 170201, 170204*,191206*, 191207, 200137*, 200138Wood including telegraph poles and railway sleepers (hazardous and non hazardous)100 tonnes12 months

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored at any one time does not exceed the limit specified in the third column of the table in sub-paragraph (2);

(b)no waste is stored for longer than the period specified in the fourth column of the table;

(c)each type of waste is stored separately; and

(d)the operation complies with such of the following additional conditions as are specified in the fifth column of the table—

Athe waste is stored in a container,
Bthe storage place has sealed drainage,
Cthe waste is stored with secondary containment,
Dthe waste is stored indoors,
Ethe waste is stored at a dock prior to being exported or after being imported,
Fthe waste must arrive at the storage place in bags and must be stored there in bags or in drums,
Gthe waste is stored in bags or in drums,
Hthe total quantity of waste stored together does not exceed 10 tonnes,
Ithe requirements in paragraph 1 of Annex III to the WEEE Directive must be complied with,
Jthe waste is stored in a baled form, in a container or indoors,
Kwithin the quantity limit specified in the third column of the table and notwithstanding additional specific condition J, up to 1,000 tonnes may be stored outdoors so long as it is stored in an enclosure designed and maintained to prevent the escape of litter.
Storage of sludge (S3)E+W+S

3.—(1) The storage of relevant waste.

(2) The table specifying relevant waste for the purposes of this paragraph is set out below.

CodesWaste types

190805

Residual sludge from sewage plants treating domestic or urban waste waters and from other sewage plants treating waste waters of a composition similar to domestic and urban waste waters only
200304Residual sludge from septic tanks and other similar installations for the treatment of sewage only

(3) For the purposes of this paragraph, the specific conditions are that—

(a)the total quantity of waste stored at any one time does not exceed 1,250 tonnes;

(b)no waste is stored for longer than 12 months;

(c)the waste is stored in a secure location at the place where it is to be used;

(d)the waste is stored at least—

(i)10 metres from any watercourse,

(ii)50 metres from any spring or well, or from any borehole not used to supply water for domestic or food production purposes,

(iii)250 metres from any borehole used to supply water for domestic or food production purposes;

(e)no waste is stored—

(i)within a zone defined by a 50-day travel time for groundwater to reach a groundwater abstraction that is used to supply water for domestic or food production purposes,

(ii)within 0.3 metres of the top of an open storage container or within 0.75 metres of the top of an earthbank tank or lagoon; and

(f)after storage, the waste is to be used in accordance with the Sludge (Use in Agriculture) Regulations 1989 M36.

Marginal Citations

M36S.I. 1989/1263, amended by S.I. 1990/880, 1996/593 and 2000/656.

PART 2 E+W+SExempt water discharge activities: descriptions and conditions

Vegetation management activitiesE+W+S

1.—(1) For the purpose of paragraph 4(a)(i) of Schedule 2, the description is cutting or uprooting a substantial amount of vegetation in any inland freshwaters or so near to any such waters that it falls into them and failure to take reasonable steps to remove the vegetation from these waters.

(2) For the purpose of paragraph 4(a)(ii) of that Schedule, the conditions in relation to a water discharge activity described in sub-paragraph (1) are—

(a)that vegetation removed from the waters must be deposited in accordance with guidance issued by the appropriate authority; and

(b)that where it is necessary to allow vegetation to pass downstream—

(i)prior notice of the dates of the water discharge activity is given, in accordance with guidance issued by the appropriate authority, to persons likely to be affected by such an activity, and

(ii)the activity is not carried on if there is insufficient flow to convey the vegetation.

Small discharges of sewage effluentE+W+S

2.—(1) For the purpose of paragraph 4(a)(i) of Schedule 2, the description is the discharge from a sewage treatment plant of 5 cubic metres per day or less of sewage effluent into inland freshwaters, coastal waters or relevant territorial waters.

(2) For the purpose of paragraph 4(a)(ii) of that Schedule, the conditions in relation to a water discharge activity described in sub-paragraph (1) are—

(a)that all works and equipment used for the treatment of sewage effluent and its discharge comply with the requirements specified in guidance issued by the appropriate authority in relation to—

(i)design and manufacturing standards,

(ii)construction, installation and operation specifications, and

(iii)siting and installation;

(b)that the discharge cannot reasonably, at the time it is first made, be made to the foul sewer;

(c)that the discharge does not contain trade effluent;

(d)that all works and equipment used for the treatment of sewage effluent and its discharge are maintained in accordance with the manufacturer's specification;

(e)that records of maintenance work are kept by the person who is the occupier of the land on which the discharge is made (“the occupier”) for at least 5 years after the work is carried out;

(f)that the occupier must notify the exemption registration authority if an exempt water discharge activity ceases to be in operation;

(g)that the occupier must ensure that all works and equipment used for the treatment of sewage effluent and its discharge are appropriately decommissioned when the exempt facility ceases to be in operation so that there is no risk of pollutants entering inland freshwaters or coastal waters;

(h)that, before an occupier ceases to be in occupation of land on which an exempt water discharge activity is carried on, the occupier must give to the person who will next be in occupation of the land a written notice—

(i)stating that an exempt water discharge activity is being carried on on the land;

(ii)containing a description of the exempt facility;

(iii)stating the conditions that must be satisfied in relation to the exempt facility; and

(iv)accompanied by any records of maintenance mentioned in paragraph (e).

PART 3 E+W+SExempt groundwater activities: descriptions and conditions

Interpretation of Part 3E+W+S

1.  In this Part—

groundwater tracer test” means a study of—

(a)

the behaviour or movement of water, or

(b)

a contaminant below ground,

which involves the addition to groundwater of a distinguishable material which has nearly identical properties to the contaminant or water being studied;

small quantity of substance” is to be construed in accordance with the final paragraph of Article 11(3)(j) of the Water Framework Directive;

specified groundwater remediation scheme” means a remediation scheme which involves the addition of a substance or preparation to groundwater which enhances the rate of remediation of groundwater contaminants;

water features” includes boreholes, wells, adits, springs, seepage and wetland areas, ponds, lakes and watercourses; and

water features survey” means a survey of all water features within 1 kilometre of the proposed activity that may be affected by it.

Discharge of small quantities of substances for scientific purposesE+W+S

2.—(1) For the purpose of paragraph 5(a)(i) of Schedule 2, the description is the discharge of small quantities of substances for scientific purposes as part of—

(a)a specified groundwater remediation scheme; or

(b)a groundwater tracer test.

(2) For the purpose of paragraph 5(a)(ii) of that Schedule, the conditions in relation to a groundwater activity of that description are—

(a)that a water features survey has demonstrated that the discharge will not cause pollution;

(b)that the prior consent of every person having a right to abstract water in the vicinity of the discharge has been obtained;

(c)that the exemption registration authority is notified before the commencement of the discharge;

(d)that in the case of discharges as part of a specified groundwater remediation scheme, monitoring of the discharge, to determine whether pollution has been caused, is undertaken.

Small discharges of sewage effluentE+W+S

3.—(1) For the purpose of paragraph 5(a)(i) of Schedule 2, the description is a discharge from a septic tank or sewage treatment plant of 2 cubic metres per day or less of sewage effluent that results in the input of pollutants to groundwater.

(2) For the purpose of paragraph 5(a)(ii) of that Schedule, the conditions in relation to a groundwater activity of that description are—

(a)that all works and equipment used for the treatment of sewage effluent and its discharge comply with the requirements specified in guidance issued by the appropriate authority in relation to—

(i)design and manufacturing standards,

(ii)construction, installation and operation specifications, and

(iii)siting and installation of infiltration systems;

(b)that the discharge cannot reasonably, at the time it is first made, be made to the foul sewer;

(c)that the discharge does not contain trade effluent;

(d)that the discharge does not result in an input of pollutants to groundwater—

(i)within 50 metres of a point at which water is abstracted from underground strata, or

(ii)within a zone defined by a 50-day travel time for groundwater to reach a groundwater abstraction point that is used to supply water for domestic or food production purposes;

(e)that all works and equipment used for the treatment of sewage effluent and its discharge are maintained in accordance with the manufacturer's specification;

(f)that records of maintenance work are kept by the person who is the occupier of the land on which the discharge is made (“the occupier”) for at least 5 years after the work is carried out;

(g)that the occupier must notify the exemption registration authority if an exempt groundwater activity ceases to be in operation;

(h)that the occupier must ensure that all works and equipment for the treatment of sewage effluent and its discharge are appropriately decommissioned when the exempt facility ceases to be in operation so that there is no risk of pollutants entering groundwater;

(i)that before an occupier ceases to be in occupation of land on which an exempt groundwater activity is carried on, the occupier must give to the person who will next be in occupation of the land a written notice—

(i)stating that an exempt groundwater activity is being carried on on the land;

(ii)containing a description of the exempt facility;

(iii)stating the conditions that must be satisfied in relation to the exempt facility; and

(iv)accompanied by any records of maintenance mentioned in paragraph (f).

Regulation 11

SCHEDULE 4E+W+SApplication to the Crown

Crown applicationE+W+S

1.  Subject to paragraphs 2 to 5, these Regulations bind the Crown.

Contravention of these Regulations by the CrownE+W+S

2.—(1) If the Crown contravenes a provision of these Regulations—

(a)it is not criminally liable under regulation 38; and

(b)no proceedings may be taken against it under regulation 42.

(2) But—

(a)on the application of a regulator, the High Court may declare a contravention of these Regulations by the Crown to be unlawful; and

(b)these Regulations apply to persons in the public service of the Crown as they apply to other persons.

Entry to Crown premisesE+W+S

3.—(1) If the appropriate authority considers that in the interests of national security particular powers of entry must not be used in relation to particular Crown premises it may certify that those powers must not be used in relation to those premises.

(2) In this paragraph—

Crown premises” means premises held or used by or on behalf of the Crown; and

power of entry” means a power of entry exercisable under section 108 of the 1995 Act M37, in relation to a function under these Regulations.

Marginal Citations

M371995 c. 25. Section 108 was amended by the Pollution Prevention and Control Act 1999, c. 24, section 6(2) and Schedule 3; S.I. 2000/1973, the Anti-social Behaviour Act 2003, c. 38, section 55(6) and (8); and the Clean Neighbourhoods and Environment Act 2005, c. 16, section 53.

Service on certain Crown operatorsE+W+S

4.—(1) This paragraph applies in relation to a regulated facility controlled or operated by a person acting on behalf of—

(a)the Royal Household;

(b)the Duchy of Lancaster; or

(c)the Duke of Cornwall or other possessor of the Duchy of Cornwall.

(2) When serving or giving notices or notifications, or instituting proceedings, the following person must be treated as the operator—

(a)in relation to sub-paragraph (1)(a), the Keeper of the Privy Purse;

(b)in relation to sub-paragraph (1)(b), the person appointed by the Chancellor of the Duchy of Lancaster;

(c)in relation to sub-paragraph (1)(c), the person appointed by the Duke of Cornwall or other possessor of the Duchy of Cornwall.

Application of this Schedule to certain radioactive substances activitiesE+W+S

5.—(1) These Regulations do not bind the Crown in relation to a radioactive substances activity carried on at premises—

(a)occupied on behalf of the Crown for naval, military or air force purposes or for the purposes of the department of the Secretary of State having responsibility for defence; or

(b)occupied by or for the purposes of visiting forces.

(2) In this paragraph, “visiting force” has the meaning given in section 12(1) of the Visiting Forces Act 1952 M38.

Marginal Citations

M381952 c. 67. Section 12 was amended by the Criminal Justice Act 1988 (c. 33), section 170(1) and Schedule 15, paragraph 14.

Regulations 13(3) and 15(3)

SCHEDULE 5E+W+SEnvironmental permits

PART 1 E+W+SGrant, variation, transfer and surrender of environmental permits

InterpretationE+W+S

1.—(1) In this Part—

applicant” means—

(a)

in the case of an application for the transfer of an environmental permit in whole or in part, the operator and the proposed transferee,

(b)

in every other case, the operator;

application” means an application—

(a)

for the grant of an environmental permit under regulation 13(1),

(b)

by an operator for the variation of an environmental permit under regulation 20(1),

(c)

for the transfer, in whole or in part, of an environmental permit under regulation 21(1), or

(d)

for the surrender, in whole or in part, of an environmental permit under regulation 25(2); and

public consultee” means a person whom the regulator considers is affected by, is likely to be affected by, or has an interest in, an application.

Making an applicationE+W+S

2.—(1) An application must—

(a)be made by the applicant on the form provided by the regulator; and

(b)include the information specified on the form.

(2) Every application must be accompanied by any fee prescribed in a charging scheme made by the regulator under section 41 of the 1995 Act M39 or by the appropriate authority under regulation 65.

Marginal Citations

M39Section 41 was amended by S.I. 2005/894, 2005/1806 (W. 138), 2006/937 and 2007/1711.

Withdrawing an applicationE+W+S

3.—(1) A duly-made application may be withdrawn by the applicant before it is determined.

(2) If an application is withdrawn the applicant is not entitled to the return of any fee which accompanied it.

Further information in respect of a duly-made applicationE+W+S

4.—(1) If the regulator considers that it requires further information to determine a duly-made application, it may serve a notice on the applicant specifying the further information and the period within which it must be provided.

(2) If the applicant fails to provide the further information in accordance with the notice, the regulator may serve a further notice on the applicant stating that the application is deemed to be withdrawn, upon which the application is deemed to be withdrawn.

(3) If an application is deemed to be withdrawn, the applicant is not entitled to the return of any fee which accompanied it.

Public participation: scopeE+W+S

5.—(1) Paragraph 6 applies to every application for the grant of an environmental permit except an application in relation to—

(a)mobile plant;

(b)a radioactive substances activity described in paragraph 5(5) of Part 2 of Schedule 23;

(c)a standard facility, unless the facility is a Part A installation; or

(d)a mining waste operation not involving a mining waste facility to which Article 7 of the Mining Waste Directive applies.

(2) Paragraph 6 applies to every application for the variation of an environmental permit if—

(a)it would entail a substantial change; or

(b)the regulator determines that the paragraph should apply.

(3) Paragraph 8 applies to every regulator-initiated variation if—

(a)it would entail a substantial change; or

(b)the regulator determines that the paragraph should apply.

(4) But paragraphs 6 and 8 do not apply to the extent that the application or regulator-initiated variation relates to—

(a)the burning of waste oil in an appliance with a rated thermal input of less than 0.4 megawatts;

(b)dry cleaning;

(c)the unloading of petrol into stationary storage tanks at a service station if it is an activity within paragraph (c) of Part B of Section 1.2 of Part 2 of Schedule 1; or

(d)any motor vehicle refuelling activity within paragraph (d) or (e) of Part B of Section 1.2 of Part 2 of Schedule 1.

(5) In this paragraph—

change in operation” means a change in the nature or functioning, or an extension, of an installation, which may have consequences for the environment;

co-incineration plant” has the meaning given in Section 5.1 of Part 2 of Schedule 1;

dry cleaning” has the meaning given in Part B of Section 7 of Part 2 of Schedule 1;

incineration plant” has the meaning given in Section 5.1 of Part 2 of Schedule 1; and

substantial change” means a change in operation of an installation which in the regulator's opinion may have significant negative effects on human beings or the environment and includes—

(a)

in relation to a Part A installation, a change in operation which in itself meets the thresholds, if any, set out in Part 2 of Schedule 1, and

(b)

in relation to an incineration plant or co-incineration plant for non-hazardous waste, a change in operation which would involve the incineration or co-incineration of hazardous waste.

(6) When assessing whether a change in operation of a Part B installation has significant effects on the environment, the regulator must consider only its emissions to air.

Public participation in relation to certain applicationsE+W+S

6.—(1) Subject to sub-paragraphs (2) and (3), if this paragraph applies the regulator must, within the consultation communication period—

(a)take the steps it considers appropriate to inform the public consultees of the application and the place and times its public register can be inspected free of charge;

(b)invite the public consultees to make representations on the application; and

(c)specify to the public consultees the address to which and the period within which representations are to be made.

(2) The regulator must not inform the public consultees of information which is to be excluded from a public register in the interests of national security unless the appropriate authority directs that it must do so.

(3) The regulator must not inform the public consultees of information which is to be excluded from a public register because it is confidential information, unless the public consultee is—

(a)a public authority and the information is necessary for the exercise of its functions; or

(b)a sewerage undertaker and the information relates to the release of any substance into a sewer vested in that undertaker.

Calculation of the consultation communication periodE+W+S

7.—(1) In paragraph 6, “the consultation communication period” means a period of 30 working days starting on the day the regulator receives a duly-made application.

(2) But if—

(a)a determination in relation to national security or confidentiality is to be made under regulation 47 or 50; or

(b)the regulator gives notice under regulation 49(1) that it considers information in an application may be confidential information,

the consultation communication period” means a period of 30 working days starting on the determination date or on the day the applicant gives notice of consent under regulation 49(2), as the case may be.

(3) In sub-paragraph (2), “determination date” means—

(a)the date of a determination under regulation 47(3) or (7);

(b)if the regulator determines under regulation 50 that the information must be excluded from the public register, the date of the determination; or

(c)if the regulator determines otherwise under that regulation—

(i)if an appeal is brought, the date of determination or withdrawal of that appeal, or

(ii)if no appeal is brought, the date on which the period for bringing an appeal expires.

Public participation in relation to regulator-initiated variationsE+W+S

8.—(1) If this paragraph applies, the regulator must notify the operator—

(a)that the public participation procedures in sub-paragraph (2) apply;

(b)of the variation it proposes to the environmental permit; and

(c)of any fee prescribed in respect of this paragraph in a charging scheme made by the regulator under section 41 of the 1995 Act or by the appropriate authority under regulation 65.

(2) The regulator must—

(a)take the steps it considers appropriate to inform the public consultees of the proposed variation;

(b)invite the operator and the public consultees to make representations on the proposed variation; and

(c)specify to the operator and the public consultees the address to which and the period within which representations are to be made.

Consultation: conditions mentioned in regulation 15(1)E+W+S

9.—(1) This paragraph applies if the regulator proposes to include a condition mentioned in regulation 15(1) in an environmental permit.

(2) If this paragraph applies, the regulator must serve a notice which complies with sub-paragraph (3) on every person appearing to it to fall within sub-paragraph (4).

(3) The notice must specify—

(a)the proposed condition;

(b)the works or other things which the condition would require; and

(c)the address to which and the period within which representations on the proposed condition are to be made (which period must not expire less than 20 working days after the day the notice is served).

(4) A person falls within this sub-paragraph if—

(a)the person is the owner, lessee or occupier of land; and

(b)regulation 15(2) would require the person to grant the rights mentioned there if the proposed condition were included in the environmental permit.

(5) In sub-paragraph (4)(a), “owner” means the person who—

(a)is receiving the rack-rent of the land, whether on the person's own account or as agent or trustee for another person; or

(b)would receive the rack-rent if the land were let at a rack-rent,

but does not include a mortgagee not in possession.

Consultation with other member StatesE+W+S

10.—(1) This paragraph applies if—

(a)an appropriate authority is aware that the grant of a relevant application or regulator-initiated variation is likely to have significant negative effects on the environment of another member State; or

(b)another member State requests information about a relevant application or about a proposal for a regulator-initiated variation.

(2) As soon as is reasonably practicable the appropriate authority must—

(a)send the particulars of the relevant application or regulator-initiated variation to that member State to serve as the basis for bilateral consultations of the type referred to in the relevant Article;

(b)inform that member State of the relevant information; and

(c)notify the operator and the regulator that it has complied with paragraphs (b) and (c).

(3) If a regulator receives notification under sub-paragraph (2)(c), it must not determine the application or make the regulator-initiated variation until the appropriate authority has—

(a)notified it that the bilateral consultations have been completed; and

(b)sent it any representations made by the member State.

(4) In this paragraph—

member State” includes Iceland, Liechtenstein and Norway but only to the extent that there is a relevant application or regulator-initiated variation which relates to the carrying on at an installation of an activity listed in the IPPC Directive;

relevant application” means an application for the grant or variation of an environmental permit in relation to an installation described in sub-paragraph (5) or a Category A mining waste facility;

relevant Article” means—

(a)

in the case of an application in relation to an installation described in sub-paragraph (5), Article 18 of the IPPC Directive,

(b)

in the case of an application in relation to a Category A mining waste facility, Article 16 of the Mining Waste Directive; and

relevant information” means—

(a)

where the relevant application or regulator-initiated variation relates to an installation described in sub-paragraph (5), a matter in paragraph 1 of Annex V to the IPPC Directive,

(b)

where it relates to a Category A mining waste facility, the information required under Article 16 of the Mining Waste Directive.

(5) The description in this sub-paragraph is an installation where an activity listed in Annex 1 to the IPPC Directive is carried on.

Duty to consider representationsE+W+S

11.  Before it determines an application or makes a regulator-initiated variation, the regulator must consider any representation—

(a)made pursuant to paragraph 6(1)(b), 8(2)(b) or 9(3)(c); or

(b)sent to it under paragraph 10(3)(b).

Duty to determine an applicationE+W+S

12.—(1) The regulator must grant or refuse a duly-made application.

(2) Except in the case of an application for the surrender of an environmental permit in whole, the regulator may grant an application subject to such conditions as it sees fit.

(3) But—

(a)variations of an environmental permit in relation to the grant of an application for variation, transfer in whole or in part, or partial surrender must be in consequence of the variation, transfer or partial surrender, as the case may be; and

(b)if granting an application for partial transfer, the regulator must grant a new environmental permit to the transferee subject to the same conditions as the original permit, varied in consequence of the partial transfer.

Identity and competence of the operatorE+W+S

13.—(1) Subject to sub-paragraph (3), the regulator must refuse an application for the grant of an environmental permit or for the transfer in whole or in part of an environmental permit if it considers that, if the permit is granted or transferred, the requirements in sub-paragraph (2) will not be satisfied.

(2) The requirements are that the applicant for the grant of an environmental permit, or the proposed transferee, on the transfer of an environmental permit (in whole or in part), must—

(a)be the operator of the regulated facility; and

(b)operate the regulated facility in accordance with the environmental permit.

(3) The requirement in sub-paragraph (2)(b) does not apply to an applicant for the grant of an environmental permit authorising the carrying on of only a stand-alone water discharge activity or stand-alone groundwater activity.

Surrender applicationsE+W+S

14.—(1) The regulator must accept an application for the surrender of an environmental permit in whole or in part under regulation 25(2) if it is satisfied that the necessary measures have been taken—

(a)to avoid a pollution risk resulting from the operation of the regulated facility; and

(b)to return the site of the regulated facility to a satisfactory state, having regard to the state of the site before the facility was put into operation.

(2) Sub-paragraph (1) does not apply to an application for the surrender of any part of an environmental permit (or if applicable, the whole permit) that authorises the carrying on of a radioactive substances activity at a nuclear site.

Time limits for determinationE+W+S

15.—(1) If—

(a)the regulator has not determined an application within the relevant period; and

(b)the applicant serves a notice on the regulator which refers to this paragraph,

the application is deemed to have been refused on the day on which the notice is served.

(2) Sub-paragraph (1) does not apply—

(a)to an application for the grant of an environmental permit that, if granted, would authorise the carrying on of a radioactive substances activity at a nuclear site; or

(b)to an application for the transfer of an environmental permit where the permit authorises the carrying on of a radioactive substances activity at a nuclear site.

(3) In sub-paragraph (1) “the relevant period” means a period, calculated in accordance with paragraph 16, of—

(a)in the case of an application for the transfer of an environmental permit in whole or in part, 2 months;

(b)in a case where paragraph 6 applies, 4 months; or

(c)in any other case, 3 months,

or in any case, a longer period than the period in paragraph (a), (b) or (c), if it is agreed by the regulator and the applicant.

Calculation of the relevant periodE+W+S

16.—(1) This paragraph provides for the calculation of a period referred to in paragraph 15(3).

(2) The period starts—

(a)in the case of an application for the grant or variation of an environmental permit in relation to a Category A mining waste facility—

(i)on the day the regulator is notified by the relevant emergency planner of the matters referred to in paragraph 14(1) of Schedule 20, and for these purposes “relevant emergency planner” has the meaning given in paragraph 2 of that Schedule, or

(ii)if paragraph 10 of this Schedule applies, on the day mentioned in sub-paragraph (i) of this paragraph or, if the day on which the appropriate authority complies with paragraph 10(3) of this Schedule is later, on that day;

(b)if paragraph 10 of this Schedule applies and the application is not one covered by paragraph (a), on the day the appropriate authority complies with paragraph 10(3) of this Schedule;

(c)in all other cases, on the day the regulator receives a duly-made application.

(3) In calculating the period the following periods must be ignored—

(a)a period beginning with the service of a notice requiring further information under paragraph 4(1) to the receipt by the regulator of that information;

(b)a period for representations mentioned in paragraph 9(3)(c) to the extent that it does not overlap with a period for representations mentioned in paragraph 6(1)(c);

(c)a period during which national security or confidentiality is being considered in relation to the application, that is to say—

(i)any period during which a determination under regulation 47(3), 47(7) or 50 is being considered (including any appeal), or

(ii)a period of 15 working days after the service of a notice under regulation 49(1);

(d)if the regulator informs the public in relation to a draft decision in accordance with paragraph 1(d) of Annex V to the IPPC Directive, a period of 20 working days.

Notification of a determination or decisionE+W+S

17.—(1) As soon as is reasonably practicable after it determines an application or decides to make a regulator-initiated variation, the regulator must comply with sub-paragraph (2).

(2) The regulator must—

(a)notify the applicant or, for a regulator-initiated variation, the operator of—

(i)its determination or decision,

(ii)the rights of appeal the applicant or operator has under regulation 31, and

(iii)the requirements relating to the exercise of those rights in paragraphs 2 and 3 of Schedule 6; and

(b)if paragraph 10 applies, notify the appropriate authority of the determination or decision.

(3) In this paragraph, “determination” and “decision” include the reasons for the determination or decision.

Date of effect of certain determinations and decisionsE+W+S

18.—(1) This paragraph applies to—

(a)a determination by which the regulator grants an application which—

(i)varies an environmental permit in consequence of an application for variation, transfer in whole or in part, or partial surrender, or

(ii)grants a new environmental permit in consequence of an application for partial transfer; and

(b)a decision to make a regulator-initiated variation.

(2) The determination or decision must specify any variation and the date it is to take effect.

(3) If the regulator grants an application for the transfer of an environmental permit in whole or in part, the determination must specify the date agreed between the regulator and the applicant that the transfer is to take effect.

Form of certain determinations and decisions: consolidation of permitsE+W+S

19.—(1) This paragraph applies to every determination and decision to which paragraph 18 applies.

(2) A determination or decision may comprise—

(a)a consolidated permit reflecting the variations; and

(b)a notice specifying the variations included in that consolidated permit.

(3) Only the variations specified are subject to the right of appeal in regulation 31(2)(b) or (c).

PART 2 E+W+SCompensation in relation to conditions affecting certain interests in land

InterpretationE+W+S

1.  In this Part—

grantor” means a person who grants the operator rights pursuant to regulation 15(2);

relevant interest” means an interest in land out of which rights have been granted pursuant to regulation 15(2); and

rights” means the rights granted by the grantor.

Entitlement to compensationE+W+S

2.  A grantor is entitled to be paid compensation under this Part by the operator.

Loss and damage for which compensation is payableE+W+S

3.—(1) Subject to paragraph 6(3) and (5)(b), compensation is payable for loss and damage of the following descriptions—

(a)depreciation in the value of any relevant interest to which the grantor is entitled which results from the grant of the rights;

(b)depreciation in the value of any other interest in land to which the grantor is entitled which results from the exercise of the rights;

(c)loss or damage, in relation to any relevant interest to which the grantor is entitled, which—

(i)is attributable to the grant of the rights or the exercise of them,

(ii)does not consist of depreciation in the value of that interest, and

(iii)is loss or damage for which the grantor would have been entitled to compensation by way of compensation for disturbance if the circumstances specified in sub-paragraph (2) applied;

(d)damage to, or injurious affection of, any interest in land to which the grantor is entitled which—

(i)is not a relevant interest, and

(ii)results from the grant of the rights or the exercise of them;

(e)loss in respect of work carried out by or on behalf of the grantor which is rendered abortive by the grant of the rights or the exercise of them.

(2) For the purpose of sub-paragraph (1)(c)(iii), the circumstances are that the relevant interest was acquired compulsorily—

(a)under the Acquisition of Land Act 1981 M40; and

(b)in pursuance of a notice to treat served on the date on which the rights were granted.

Marginal Citations

Date when entitlement to compensation arisesE+W+S

4.—(1) An entitlement to compensation under this Part arises on the date of the grant of the rights.

(2) But if an appeal against the conditions of the environmental permit which rendered the grant of rights necessary is refused, the entitlement to compensation arises on the date the appeal is determined.

Application for compensationE+W+S

5.—(1) An application for compensation under this Part must be made by the grantor—

(a)within 12 months after the date on which the entitlement to compensation arises; or

(b)within 6 months after the date on which the rights are first exercised.

(2) An application must be—

(a)made in writing;

(b)made to the operator to whom the rights were granted; and

(c)delivered at or sent by pre-paid post to the last known address for correspondence of that operator.

(3) The application must contain, or be accompanied by—

(a)a copy of the grant of rights in respect of which the grantor's entitlement arises and any plans attached to that grant;

(b)a description of the exact nature of any interest in land in respect of which compensation is applied for;

(c)a statement of the amount of compensation applied for—

(i)distinguishing the amounts applied for under each of paragraphs 3(a) to (e), and

(ii)showing how the amount applied for under each paragraph has been calculated; and

(d)if the date on which the entitlement to compensation arises is ascertained in accordance with paragraph 4(2), a copy of the notice of the final determination of the appeal.

Assessment of the amount to be paid by way of compensationE+W+S

6.—(1) The amount to be paid by way of compensation under this Part must be assessed in accordance with this paragraph.

(2) The rules set out in section 5 of the Land Compensation Act 1961 M41 have effect for the purposes of this paragraph as they have effect for the purpose of assessing compensation for the compulsory acquisition of an interest in land, so far as applicable and subject to any necessary modifications.

(3) No account is to be taken of any enhancement of the value of an interest in land by reason of any building erected, work done, or improvement or alteration made on land in which the grantor is, or was at the time the building or other work was carried out, directly or indirectly concerned, if the work carried out—

(a)was not reasonably necessary; and

(b)was undertaken with a view to obtaining compensation or increased compensation.

(4) In calculating the amount of a loss under paragraph 3(e), expenditure incurred in the preparation of plans or on other similar preparatory matters is to be taken into account.

(5) Where the interest in respect of which compensation is to be assessed is subject to a mortgage—

(a)the compensation must be assessed as if the interest were not subject to the mortgage; and

(b)no compensation is payable in respect of the interest of the mortgagee (as distinct from the interest which is subject to the mortgage).

(6) Compensation must include an amount equal to the grantor's reasonable valuation and legal expenses.

Marginal Citations

M411961 c. 33. Section 5 was amended by the Planning and Compensation Act 1991 (c. 34), sections 70 and 84, and Schedules 15 and 19.

Payment of compensationE+W+S

7.—(1) Compensation in respect of an interest which is subject to a mortgage must be paid—

(a)to the mortgagee; or

(b)if there is more than one mortgagee, to the first mortgagee,

and must, in either case, be applied by the mortgagee as if it were proceeds of sale.

(2) Amounts of compensation determined under this Part are payable—

(a)where the operator and either the grantor or mortgagee agree that a single payment is to be made on a specified date, on that date;

(b)where the operator and either the grantor or mortgagee agree that payment is to be made in instalments at different dates, on the date agreed as regards each instalment;

(c)in any other case, subject to any direction of the Upper Tribunal or the court, as soon as reasonably practicable after the amount of the compensation has been determined.

(3) Any question of the application of paragraph 6(3) or dispute as to the amount of compensation must be referred to and determined by the Upper Tribunal.

(4) In relation to the determination of such a question, section 4 of the Land Compensation Act 1961 M42 applies as if the reference in section 2(1) of that Act to section 1 of that Act were a reference to sub-paragraph (3) of this paragraph.

Marginal Citations

Interest payable on compensationE+W+S

8.—(1) Compensation payable under this Part carries interest at the rate for the time being prescribed under section 32 of the Land Compensation Act 1961 from the date specified in sub-paragraph (2) to payment.

(2) The date is—

(a)in the case of compensation payable under paragraph 3(a) or (b), the date of depreciation;

(b)in the case of compensation payable under paragraph 3(c), (d) or (e), the date on which the loss is sustained, the damage is done, or the injurious affection occurs, as the case may be;

(c)in the case of compensation payable under paragraph 6(6), the date on which the expenses become payable.

(3) If it appears to a person (“A”) that A may become liable to pay to another person (“B”) compensation under this Schedule or interest under this paragraph, on the written request of B, A may make one or more payments on account of such compensation or interest.

(4) A may recover the payment or excess if, after A makes a payment under sub-paragraph (3)—

(a)it is agreed or determined that A is not liable to pay compensation or interest; or

(b)by reason of any agreement or determination, the payment is shown to be excessive.

Regulation 31(14)

SCHEDULE 6E+W+SAppeals to the appropriate authority

InterpretationE+W+S

1.  In this Schedule—

appeal” means an appeal to the appropriate authority;

appointed person” means the person appointed under paragraph 5; and

determination” includes the reasons for the determination.

Making an appealE+W+S

2.—(1) A person making an appeal must—

(a)send the appropriate authority written notice of the appeal and the documents specified in sub-paragraph (2); and

(b)at the same time send the regulator copies of the notice and documents.

(2) The documents are—

(a)a statement of the grounds of appeal;

(b)a copy of any relevant application;

(c)a copy of any relevant environmental permit;

(d)a copy of any relevant correspondence between the appellant and the regulator;

(e)a copy of any decision or notice which is the subject matter of the appeal; and

(f)a statement indicating whether the appellant wishes the appeal to be in the form of a hearing or to be dealt with by way of written representations.

(3) An appellant may withdraw an appeal by notifying the appropriate authority in writing and must send a copy of that notification to the regulator.

Time limit for making an appealE+W+S

3.—(1) A notice of appeal must be given—

(a)in relation to an appeal against a revocation notice, before the revocation notice takes effect;

(b)in relation to the withdrawal of a duly-made application under paragraph 4(2) of Part 1 of Schedule 5, not later than 15 working days after the date of the further notice served under that paragraph;

(c)in relation to an enforcement notice, a regulator-initiated variation, suspension notice, mining waste facility closure notice or landfill closure notice, not later than 2 months after the date of the variation or notice;

(d)in relation to a prohibition notice, not later than 21 days after the date of the notice; or

(e)in any other case, not later than 6 months after the date of the decision or deemed decision.

(2) The appropriate authority may in a particular case allow notice of appeal to be given after the periods mentioned in sub-paragraph (1)(b) to (e) have expired.

Notice to affected and interested personsE+W+S

4.—(1) The regulator must, within 10 working days after receipt of a copy of a notice of appeal, give notice of it to any person whom the regulator considers is affected by, is likely to be affected by, or has an interest in, the subject matter of the appeal.

(2) A notice must include—

(a)a description of the subject matter of the appeal; and

(b)a statement that representations in writing may be made to the appropriate authority within a period of 15 working days after the date of the notice.

(3) The regulator must notify the appropriate authority of the persons to whom, and the date on which, such a notice was sent, within 10 working days after sending it.

(4) The regulator must give notice of the withdrawal of an appeal to every person given such a notice.

Hearing before an appointed personE+W+S

5.—(1) Before determining an appeal the appropriate authority may give the appellant and the regulator an opportunity of appearing before and being heard by a person appointed by the appropriate authority, and must do so in a case where a request is duly made by the appellant or the regulator to be so heard.

(2) If the appointed person so decides, a hearing may be held wholly or to any extent in private.

(3) The persons entitled to be heard at a hearing are—

(a)the appellant;

(b)the regulator; and

(c)a person who has made representations to the regulator in respect of the subject matter of the appeal within the period mentioned in paragraph 4(2)(b).

(4) The appointed person may permit other persons to be heard and such permission must not be unreasonably withheld.

(5) After the hearing, the appointed person must make a report in writing to the appropriate authority which must include the appointed person's—

(a)conclusions; and

(b)recommendations or reasons for not making recommendations.

(6) Subsections (2) to (5) of section 250 of the Local Government Act 1972 M43 apply to hearings held under this paragraph by an appointed person as they apply to inquiries caused to be held under that section by a Minister with the following modifications—

(a)the substitution in subsection (2) for the reference to the person appointed to hold the inquiry with a reference to the appointed person;

(b)the substitution in subsection (4) for the references to the Minister causing the inquiry to be held with references to the appropriate authority;

(c)the substitution of the reference in that subsection to a local authority with a reference to the regulator;

(d)the substitution in subsection (5) for the reference to the Minister causing the inquiry to be held with a reference to the appropriate authority.

Marginal Citations

M431972 c. 70. Section 250 was amended by the Criminal Justice Act 1982, c. 48, section 46; the Statute Law (Repeals) Act 1989, c. 43; and the Housing and Planning Act 1986, c. 63, section 49(2) and Schedule 12.

Notice of determination of an appealE+W+S

6.—(1) The appropriate authority must give notice to the appellant of its determination and provide the appellant with a copy of the report mentioned in paragraph 5(5).

(2) At the same time the appropriate authority must send—

(a)a copy of the documents mentioned in sub-paragraph (1) to the regulator; and

(b)a copy of its determination to any person who made representations in respect of the subject matter of the appeal to the authority, or at any hearing.

Procedure following the quashing of a determination of an appropriate authorityE+W+S

7.—(1) If a determination is quashed in proceedings before a court, the appropriate authority—

(a)must send to the persons notified of its determination under paragraph 6 a statement of the matters in relation to which further representations are invited;

(b)must give those persons the opportunity of making written representations in respect of those matters within 20 working days after the date of the statement; and

(c)may cause a hearing to be held or reopened.

(2) If a hearing is held or reopened under sub-paragraph (1)(c), paragraphs 5(2) to 5(6) apply as they apply to a hearing held under paragraph 5(1).

(3) Paragraph 6 applies to the re-determination of an appeal as it applies to the determination of that appeal.

Regulation 35(2)(a)

SCHEDULE 7E+W+SPart A installations and Part A mobile plant

ApplicationE+W+S

1.  This Schedule applies in relation to every Part A installation or Part A mobile plant.

InterpretationE+W+S

2.  When interpreting the IPPC Directive for the purposes of this Schedule—

(a)except where otherwise defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)installation” means “Part A installation or Part A mobile plant”;

(c)permit” means “environmental permit”;

(d)the competent authority is the regulator; and

(e)“substance” is to be read as including, after the words “its compounds” in Article 2(1) of the IPPC Directive, the words “and any biological entity or micro-organism”.

Exercise of regulator's functions: generalE+W+S

3.  The regulator must exercise its functions under these Regulations for the purpose of achieving a high level of protection of the environment taken as a whole by, in particular, preventing or, where that is not practicable, reducing emissions into the air, water and land.

Applications for the grant of an environmental permitE+W+S

4.—(1) The regulator must ensure that every application for the grant of an environmental permit includes the information specified in Article 6(1) of the IPPC Directive.

(2) But when interpreting Article 6(1), the regulator must ignore the fourth indent in the case of Part A mobile plant.

Exercise of relevant functionsE+W+S

5.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the IPPC Directive—

(a)Article 3, ignoring the words “provide that the competent authorities” contained in the first sentence of Article 3(1);

(b)Article 9(1) to (6);

(c)Article 10;

(d)Article 12;

(e)Article 14 point (b);

(f)Article 19(2).

(2) But when interpreting the IPPC Directive for the purposes of this paragraph, the regulator must—

(a)ignore the second and fourth paragraphs of Article 9(3);

(b)in the case of Part A mobile plant, in Article 9(4), ignore the words “its geographical location and the local environmental conditions”;

(c)ignore the second paragraph of Article 9(5);

(d)ignore the second paragraph of Article 9(6); and

(e)in the case of Part A mobile plant, ignore Article 12.

Public participationE+W+S

6.  The regulator must exercise its functions under the public participation provisions in relation to Part A installations so as to meet the requirements of Article 15(1) of the IPPC Directive.

Review of environmental permitsE+W+S

7.  The regulator must review an environmental permit if any of the circumstances in Article 13(2) of the IPPC Directive apply in relation to the Part A installation or Part A mobile plant whose operation it authorises.

Developments in best available techniquesE+W+S

8.—(1) The regulator must ensure that it is informed of developments in best available techniques.

(2) In this paragraph, “best available techniques” has the meaning given in Article 2(12) of the IPPC Directive.

Regulation 35(2)(b)

SCHEDULE 8E+W+SPart B installations and Part B mobile plant

ApplicationE+W+S

1.  This Schedule applies in relation to every Part B installation and Part B mobile plant.

InterpretationE+W+S

2.  When interpreting the IPPC Directive for the purposes of this Schedule—

(a)except where otherwise defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)installation” means “Part B installation” or “Part B mobile plant”;

(c)permit” means “environmental permit”;

(d)a reference to “emission limit values” is to be read as a reference to those values which are relevant to air pollution;

(e)the competent authority is the regulator; and

(f)“substance” is to be read as including, after the words “its compounds” in Article 2(1) of that Directive, the words “and any biological entity or micro-organism”.

Exercise of regulator's functions: generalE+W+S

3.  The regulator must exercise its functions under these Regulations for the purpose of preventing or, where that is not practicable, reducing emissions into the air.

Applications for the grant of an environmental permitE+W+S

4.—(1) The regulator must ensure that every application for the grant of an environmental permit includes the information specified in Article 6(1) of the IPPC Directive.

(2) But, when interpreting Article 6(1), the regulator must—

(a)ignore points (b), (d) and (g);

(b)ignore points (c) and (e) to the extent that the application relates to the carrying on of dry cleaning at a Part B installation;

(c)in point (e), the reference to “each medium” is to be read as a reference to “air”;

(d)ignore point (f) to the extent that the application relates to the burning of waste oil in an appliance with a net rated thermal input of less than 0.4 megawatts at a Part B installation;

(e)in point (h), read the reference to “Article 3” as a reference to “Article 3(1)(a) and (1)(b)”.

(3) In this paragraph, “dry cleaning” has the meaning given in Part B of Section 7 of Part 2 of Schedule 1.

Exercise of relevant functionsE+W+S

5.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the IPPC Directive—

(a)Article 3(1)(a) and (b);

(b)Article 9(1) to (4);

(c)Article 10;

(d)Article 12;

(e)Article 19(2).

(2) But when interpreting the IPPC Directive for the purposes of this paragraph, the regulator must—

(a)in Article 3(1), ignore the words “provide that the competent authorities”;

(b)in Article 9(1) read—

(i)the reference to “Article 3” as a reference to “Article 3(1)(a) and (b)”, and

(ii)the words from “in order” to the end of the Article as “for the purpose of preventing or, where that is not practicable, reducing emissions into the air”;

(c)in Article 9(3), ignore the words “and their potential to transfer pollution from one medium to another (water, air and land)”;

(d)in Article 9(4)—

(i)in the case of Part B mobile plant, ignore the words “its geographical location and the local environmental conditions”, and

(ii)ignore the last sentence;

(e)in the case of Part B mobile plant, ignore Article 12;

(f)in Annex III, ignore the section headed “WATER”.

Review of environmental permitsE+W+S

6.  The regulator must review an environmental permit if any of the circumstances in Article 13(2) of the IPPC Directive apply in relation to the Part B installation or Part B mobile plant whose operation it authorises.

Developments in best available techniquesE+W+S

7.—(1) The regulator must ensure that it is informed of developments in best available techniques.

(2) In this paragraph, “best available techniques” has the meaning given in Article 2(12) of the IPPC Directive, save that the reference to “Annex IV” in that Article is to be read as a reference to “paragraphs 4 to 8 of Annex IV”.

Regulation 35(2)(c)

SCHEDULE 9E+W+SWaste operations

ApplicationE+W+S

1.  This Schedule applies in relation to every waste operation.

InterpretationE+W+S

2.  In this Schedule—

disposal” has the same meaning as in the Waste Framework Directive and related terms are to be construed accordingly; and

recovery” has the same meaning as in the Waste Framework Directive and related terms are to be construed accordingly.

Grant of an environmental permit for a relevant waste operation: requirement for prior planning permissionE+W+S

3.—(1) Following an application under regulation 13(1), the regulator must not grant an environmental permit that relates to a relevant waste operation if—

(a)use of the site for carrying on the relevant waste operation requires planning permission or development consent under the Planning Act 2008 M44; and

(b)no such permission or consent is in force.

(2) In this paragraph—

planning permission” means planning permission under the Town and Country Planning Act 1990 M45 and includes—

(a)

a certificate under section 191 of that Act M46, and

(b)

an established use certificate under section 192 of that Act, as originally enacted, which continues to have effect for the purposes of subsection (4) of that section; and

relevant waste operation” means—

(a)

a waste operation that is not carried on at an installation or by means of Part A mobile plant or Part B mobile plant, or

(b)

a specified waste management activity.

(3) In sub-paragraph (2)(b), “specified waste management activity” means one of the following activities—

(a)the disposal of waste in a landfill falling within Section 5.2 of Part 2 of Schedule 1;

(b)the disposal of waste falling within Section 5.3 of Part 2 of Schedule 1;

(c)the recovery of waste falling within Part A(1)(c)(i), (ii), (v) or (vii) of Section 5.4 of Part 2 of Schedule 1.

(4) But “specified waste management activity” does not include any activity specified in sub-paragraph (3)(b) or (c) if that activity—

(a)is carried on at the same installation as a Part A(1) activity not specified in sub-paragraph (3); and

(b)is not the activity which constitutes the primary purpose for operating the installation.

Marginal Citations

Exercise of relevant functionsE+W+S

[F234.(1) The regulator must exercise its relevant functions—

(a)for the purposes of ensuring that—

(i)the waste hierarchy referred to in Article 4 of the Waste Framework Directive is applied to the generation of waste by a waste operation;

(ii)waste generated by a waste operation is treated in accordance with Article 4 of the Waste Framework Directive;

(b)for the purposes of implementing Article 13 of the Waste Framework Directive, but not in respect of nuisances and hazards arising from traffic beyond the site of a waste operation;

(c)so as to ensure that the requirements in the second paragraph of Article 23(1) of the Waste Framework Directive are met;

(d)so as to ensure compliance with the following Articles of the Waste Framework Directive—

(i)Article 18(2)(b) and (c);

(ii)Article 23(3);

(iii)Article 23(4);

(iv)Article 35(1).

(2) But the following duties take effect in relation to an environmental permit which is in force on the date of coming into force of the Waste (England and Wales) Regulations 2011 on the first review of the permit by the regulator (under regulation 34(1)) after that date—

(a)the duty in paragraphs (1)(a), (1)(d)(i) and (1)(d)(iii);

(b)the duty in paragraph (1)(c), to the extent that it is imposed in relation to Article 23(1)(e) and (f).]

Textual Amendments

Exercise of relevant functions: disposal of wasteE+W+S

F245.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Regulation 35(2)(d)

SCHEDULE 10E+W+SLandfill

ApplicationE+W+S

1.  This Schedule applies in relation to every landfill except a landfill which finally ceased to accept waste for disposal before 16th July 2001.

Interpretation: generalE+W+S

2.—(1) In this Schedule—

(a)unless otherwise provided, an expression that is defined in the Landfill Directive has the meaning given in that Directive;

(b)the Decision” means Council Decision 2003/33/EC M47;

(c)the Decision Annex” means the Annex to the Decision; and

(d)landfill” has the meaning given in Article 2(g) of the Landfill Directive, but does not include any operation excluded from the scope of that Directive by Article 3(2).

(2) When interpreting the Landfill Directive and the Decision for the purposes of this Schedule—

(a)an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)landfill permit” means environmental permit;

(c)nature protection zone” means any—

(i)site of special scientific interest within the meaning given in section 52 of the Wildlife and Countryside Act 1981 M48, or

(ii)European site within the meaning given in regulation 10(1) of the Conservation (Natural Habitats, &c) Regulations 1994 M49;

(d)PAHs (polycyclic aromatic hydrocarbons)” means Napthalene, Acenaphthylene, Acenaphthene, Anthracene, Benzo(a)anthracene, Benzo(b)fluoranthene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Chrysene, Coronene, Dibenzo(a,h)anthracene, Fluorene, Fluoranthene, Indeno(1,2,3-c,d)pyrene, Phenanthrene and Pyrene;

(e)permit” means environmental permit;

(f)SIC code” means the UK Standard Industrial Classification of Economic Activities 2007 (SIC 2007) published by the Office for National Statistics on 14th December 2007 and implemented on 1st January 2008 M50; and

(g)the competent authority is the regulator.

Marginal Citations

M47OJ No L 11, 16.1.2003, p 27.

M481981 c. 69; the definition was inserted by the Countryside and Rights of Way Act 2000, section 75(1) and Schedule 9.

M49S.I. 1994/2716, amended by S.I. 2000/192. There are other amending instruments but none is relevant.

M50ISBN: 0116216417.

Applications for the grant of an environmental permitE+W+S

3.  The regulator must require that every application for the grant of an environmental permit includes the information specified in Article 7 of the Landfill Directive.

Inspection prior to operationE+W+S

4.  The regulator must inspect every landfill site so as to comply with the requirements in Article 8(c) of the Landfill Directive.

Exercise of relevant functionsE+W+S

5.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Landfill Directive—

(a)Article 4;

(b)Article 5(3) and (4);

(c)Article 6;

[F25(d)Article 8, but not in respect of nuisances and hazards arising from traffic beyond the site of a landfill;]

(e)Article 9;

(f)Article 10;

(g)Article 11(1);

(h)Article 12;

(i)Article 13;

(j)Article 14.

(2) The regulator must exercise those relevant functions having regard to Article 1 of the Landfill Directive.

(3) The regulator must exercise those relevant functions so as to ensure compliance with the requirements imposed on the Member State by the following provisions of the Decision—

(a)Article 2;

(b)Article 3;

(c)Article 4.

Textual Amendments

Interpretation of the Landfill Directive for the exercise of relevant functionsE+W+S

6.  When interpreting the Landfill Directive for the purposes of paragraph 5(1)—

(a)in Article 6(a), the words “This provision may not apply to” is to be read as “This provision does not apply to”;

(b)in Article 8(a)(iv), ignore the last sentence;

(c)the last sentence of paragraph 2 of Annex I is to be read as “The above provisions do not apply to inert landfills.”; and

(d)in paragraph 3(3) of Annex I, ignore the sentence immediately following the table headed “Leachate collection and bottom sealing”.

Interpretation of the Decision Annex for the exercise of relevant functions: generalE+W+S

7.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)in points 1.1.1 and 1.2, the periods referred to as to be defined or determined by the Member State are in each case 2 years;

(b)point 1.1.2(b) is to be read as requiring the SIC code of the process producing the waste to be part of the information referred to;

(c)in point 1.1.2(g), ignore the words “in case of mirror entries”;

(d)ignore the third sentence of section 2;

(e)in points 2.1.2.1, 2.2.2, 2.3.1 and 2.4.1 the table columns headed “L/S = 10 l/kg” must be used to determine limit values;

(f)in the table in point 2.1.2.2, the limit value for PAHs (polycyclic aromatic hydrocarbons) is set at 100 mg/kg;

(g)in point 2.2.3, the first reference to “gypsum-based materials” is to be read as “gypsum-based and other high sulphate-bearing materials”;

(h)in point 2.3.3, the first reference to “suitable asbestos waste” is to be read as “suitable materials”; and

(i)in the table in point 2.4.1, the limit values are subject to the qualification that the regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher than those listed for specified wastes accepted at a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.

Interpretation of the Decision Annex for the exercise of relevant functions: additional acceptance criteria relating to physical stability and bearing capacity of granular wasteE+W+S

8.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)in point 2.3.2, the criteria to ensure that granular waste will have sufficient physical stability and bearing capacity are that it has either—

(i)if it is cohesive waste, a mean in situ shear strength of at least 50kPa, or

(ii)if it is non-cohesive waste, an in situ bearing ratio of at least 5%;

(b)point 2.4.2 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the criteria in paragraph (a)(i) and (a)(ii).

Interpretation of the Decision Annex for the exercise of relevant functions: additional acceptance criteria in relating to monolithic wasteE+W+S

9.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)point 2.3.1 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to stable, non-reactive monolithic hazardous waste and non-hazardous waste which is to be landfilled in the same cell with such waste—

(i)it meets either—

(aa)the limit values for leaching set out in the table in point 2.3.1, or

(bb)the limit values for leaching set out in the following table—

ComponentSymbolmg/m2
ArsenicAs1.3
BariumBa45
CadmiumCd0.2
Total ChromiumCrtotal5
CopperCu45
MercuryHg0.1
MolybdenumMo7
NickelNi6
LeadPb6
AntimonySb0.3
SeleniumSe0.4
ZincZn30
ChlorideCl-10,000
FluorideF-60
SulphateSO42-10,000
Dissolved Organic CarbonDOCMust be evaluated

(ii)it meets the additional criteria set out in the following table—

ParameterValue
pH of the eluate from the monolith or crushed monolithMust be evaluated
Electrical conductivity (μ S.cm-1m-2) of the eluate from the monolith or crushed monolithMust be evaluated
Acid Neutralisation Capacity (ANC) of the crushed monolithMust be evaluated

(iii)it has a mean unconfined compressive strength of at least 1Mpa after 28 days curing;

(iv)it has either—

(aa)dimensions of greater than 40cm along each side, or

(bb)a depth and fracture spacing when hardened of greater than 40cm; and

(v)where the waste was subjected to treatment to render it monolithic, prior to such treatment it met the following limit values—

(aa)loss on ignition of 10%, or

(bb)total organic carbon of 6%;

(b)point 2.4.1 in the Decision Annex is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to monolithic waste to be accepted at a landfill for hazardous waste—

(i)it complies with paragraphs (a)(ii) to (a)(v), and

(ii)it meets either—

(aa)the limit values for leaching set out in the table in point 2.4.1, or

(bb)the limit values for leaching set out in the following table—

1 The regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher for specified wastes accepted in a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.

ComponentsSymbolmg/m2 1
ArsenicAs20
BariumBa150
CadmiumCd1
Total ChromiumCrtotal25
CopperCu60
MercuryHg0.4
MolybdenumMo20
NickelNi15
LeadPb20
AntimonySb2.5
SeleniumSe5
ZincZn100
ChlorideCl-20,000
FluorideF-200
SulphateSO42-20,000
Dissolved Organic CarbonDOCMust be evaluated

Closure of a landfillE+W+S

10.—(1) The regulator must set out any reasoned decision under Article 13(a)(iii) of the Landfill Directive in a closure notice served on the operator.

(2) A closure notice must, in addition to stating the regulator's reasons for requiring initiation of the closure procedure, specify—

(a)the steps the operator is required to take to initiate the procedure; and

(b)the period within which they must be taken.

(3) The regulator may withdraw a closure notice at any time by further notice served on the operator.

(4) Closure of a landfill does not relieve the operator of liability under the conditions of the environmental permit.

Surrender applicationsE+W+S

11.  When determining an application for the surrender, in whole or in part, of an environmental permit, the regulator must exercise its functions so as to ensure the operator complies with the requirements in Article 13(d) of the Landfill Directive.

Regulation

SCHEDULE 11E+W+SWaste motor vehicles

ApplicationE+W+S

1.  This Schedule applies in relation to waste motor vehicles.

InterpretationE+W+S

2.—(1) In this Schedule—

waste” means waste within the meaning of [F26Article 3(1)] of the Waste Framework Directive; and

waste motor vehicle” means a motor vehicle that is waste.

(2) When interpreting the End-of-Life Vehicles Directive for the purposes of this Schedule—

(a)except where otherwise defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)end-of-life vehicle” means waste motor vehicle;

(c)vehicle” means any motor vehicle;

(d)waste” means waste within the meaning of [F26Article 3(1)] of the Waste Framework Directive.

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with Article 6(1) and (3) of the End-of-Life Vehicles Directive.

(2) When interpreting the End-of-Life Vehicles Directive for the purposes of this paragraph, “establishment or undertaking” is to be read as “operator”.

Regulation

SCHEDULE 12E+W+SWaste electrical and electronic equipment

ApplicationE+W+S

1.  This Schedule applies in relation to waste electrical and electronic equipment which is within the scope of the WEEE Directive by virtue of Article 2 of that Directive.

InterpretationE+W+S

2.—(1) In this Schedule, “waste electrical and electronic equipment” has the meaning given in Article 3(b) of the WEEE Directive.

(2) When interpreting the WEEE Directive for the purposes of this Schedule—

(a)an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)permit” means environmental permit; and

(c)waste” means waste within the meaning of [F27Article 3(1)] of the Waste Framework Directive.

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with Article 6(1) first paragraph and Article 6(3) and (4) of the WEEE Directive.

(2) But when interpreting the WEEE Directive for the purposes of this paragraph, ignore the following words in Article 6(4)—

(a)“or the registration referred to in paragraph 2”; and

(b)“and for the achievement of the recovery targets set out in Article 7”.

Regulation 35(2)(g)

SCHEDULE 13E+W+SWaste incineration

ApplicationE+W+S

1.  This Schedule applies in relation to every waste incineration installation.

InterpretationE+W+S

2.—(1) In this Schedule, “waste incineration installation” means that part of an installation or Part A mobile plant in which any of the following activities is carried on—

(a)the incineration of waste falling within the following provisions of Section 5.1 of Part 2 of Schedule 1—

(i)paragraphs (a) to (c) of Part A(1), or

(ii)paragraph (a) or (b) of Part A(2); or

(b)any other activity falling within Part 2 of Schedule 1 which is carried on in a co-incineration plant (as that term is defined in Section 5.1 of Part 2 of Schedule 1).

(2) When interpreting the Waste Incineration Directive for the purposes of this Schedule—

(a)an expression that is defined in Section 5.1 of Part 2 of Schedule 1 has the meaning given in that Section;

(b)except where also defined in Section 5.1 of Part 2 of Schedule 1, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(c)permit” means environmental permit; and

(d)the competent authority is the regulator.

Applications for the grant of an environmental permitE+W+S

3.  The regulator must require that every application for the grant of an environmental permit includes the information specified in Article 4(2) of the Waste Incineration Directive.

Exercise of relevant functionsE+W+S

4.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Waste Incineration Directive—

(a)Article 4(3) to (5);

(b)Article 5;

(c)Article 6, except the last indent of 6(4);

(d)Article 7(1) to (4);

(e)Article 8(1) to (7);

(f)Article 9;

(g)Article 10;

(h)Article 11, except for 11(1) and (13);

(i)Article 12(2), to the extent that it relates to the provision of annual reports by the operator;

(j)Article 13.

(2) But when interpreting the Waste Incineration Directive for the purposes of this paragraph—

(a)in Article 6(4), ignore the words “Member States may lay down rules governing these authorisations” in both places they occur;

(b)in Article 11(1), ignore the words “either” and “or by general binding rules”;

(c)Article 11(2)(c) is to be read as if the words “and dioxin-like polychlorinated biphenyls and poly-cyclic aromatic hydrocarbons” appeared after the word “furans”; and

(d)Annex V is to be read as if every reference to an exemption which “may” be authorised by the competent authority was a reference to an exemption which “must” be authorised by the competent authority.

Regulation 35(2)(h)

SCHEDULE 14E+W+SSED installations

ApplicationE+W+S

1.  This Schedule applies in relation to every SED installation.

InterpretationE+W+S

2.—(1) In this Schedule—

directly associated activity”, in relation to a SED activity, means an operation which—

(a)

has a technical connection with the SED activity,

(b)

is carried on on the same site as the SED activity, and

(c)

could have an effect on a discharge of volatile organic compounds into the environment;

SED installation” means—

(a)

a stationary technical unit where one or more SED activities are carried on, and

(b)

any other location on the same site where any other directly associated activities are carried on; and

the Solvent Emissions Directive” means Council Directive 1999/13/EC on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations M51.

(2) When interpreting the Solvent Emissions Directive for the purposes of this Schedule—

(a)an expression that is defined in Section 7 of Part 2 of Schedule 1 has the meaning given in that Section;

(b)except where also defined in that Section or in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(c)authorisation” means environmental permit;

(d)emission” has the meaning given in the Solvent Emissions Directive;

(e)installation” means SED installation;

(f)the competent authority is the regulator.

Marginal Citations

M51OJ No L 85, 29.3.1999, p 1, as last amended by Directive 2008/112/EC of the European Parliament and of the Council (OJ No L 345, 23.12.2008, p 72). There is 1 relevant corrigendum, OJ No L 240, 10.9.1999, p 24.

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Solvent Emissions Directive—

(a)Article 4(4);

(b)Article 5, except for the last sentence of 5(3), and 5(13);

(c)Article 7(2);

(d)Article 8(1) to (4);

(e)Article 9;

(f)Article 10.

(2) When interpreting the Solvent Emissions Directive for the purposes of this paragraph—

(a)in Article 5(1), ignore the words “either” and “or by general binding rules”;

(b)in Article 7(2), ignore the words “and during the formulation of general binding rules”; and

(c)in point 1 of Annex IIB, ignore the last sentence.

Regulation 35(2)(i)

SCHEDULE 15E+W+SLarge combustion plants

ApplicationE+W+S

1.  This Schedule applies in relation to every combustion plant to which the Large Combustion Plants Directive applies by virtue of Article 1 of that Directive.

InterpretationE+W+S

2.—(1) In this Schedule—

combustion plant” has the meaning given in Article 2(7) of the Large Combustion Plants Directive;

existing plant” has the meaning given in Article 2(10) of the Large Combustion Plants Directive; and

the Large Combustion Plants Directive” means Directive 2001/80/EC of the European Parliament and of the Council on the limitation of emissions of certain pollutants into the air from large combustion plants M52.

(2) When interpreting the Large Combustion Plants Directive for the purposes of this Schedule—

(a)except where also defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)the competent authority is—

(i)for the purposes of exercising a judgment of whether there is an overriding need to maintain energy supplies under Article 7(1) or (3) of the Large Combustion Plants Directive, the appropriate authority,

(ii)otherwise, the regulator;

(c)the national emission reduction plan referred to in Article 4(6) of the Large Combustion Plants Directive is the emission plan, as amended from time to time, published under regulation 4(1) of the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M53;

(d)emission” has the meaning given in the Large Combustion Plants Directive;

(e)licence” means environmental permit;

(f)permit” means environmental permit; and

(g)in Article 4(4), ignore the words “and from their inclusion in the national emission reduction plan”.

Marginal Citations

M52OJ No L 309, 27.11.2001, p 1. There is a relevant corrigendum, OJ No L 319, 23.11.2002, p 30.

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Large Combustion Plants Directive—

(a)Article 4(1), (2) and (4);

(b)Article 5(1);

(c)Article 6;

(d)Article 7, except the last sentence of 7(2) and the last sentence of 7(3);

(e)Article 8;

(f)Article 9;

(g)Article 10;

(h)Article 12;

(i)Article 13;

(j)Article 14(1), (2) and (4).

(2) The regulator must—

(a)exercise its relevant functions in relation to a regulated facility which—

(i)is an existing plant, and

(ii)elects to comply with the emission limit values established under Article 4(1) of the Large Combustion Plants Directive,

so as to ensure compliance with Article 4(3)(a) of that Directive; and

(b)exercise its relevant functions in relation to a regulated facility which is included in the national emission reduction plan referred to in Article 4(6) of the Large Combustion Plants Directive so as to ensure compliance with Article 4(3)(b) of that Directive, to the extent that such compliance is not ensured by the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007.

(3) The regulator must—

(a)immediately inform the appropriate authority of any suspension under Article 7(2) or derogation under Article 7(3) of the Large Combustion Plants Directive;

(b)immediately inform the appropriate authority if it considers that the appropriate authority must make a judgment of whether there is an overriding need to maintain energy supplies under Article 7(1) or (3) of the Large Combustion Plants Directive; and

(c)exercise its relevant functions in relation to such a judgment in accordance with the decision of that authority.

Regulation 35(2)(j)

SCHEDULE 16E+W+SAsbestos

ApplicationE+W+S

1.  This Schedule applies in relation to every regulated facility.

InterpretationE+W+S

2.—(1) In this Schedule, “the Asbestos Directive” means Council Directive 87/217/EEC on the prevention and reduction of environmental pollution by asbestos M54.

(2) When interpreting the Asbestos Directive for the purposes of this Schedule—

(a)except where otherwise defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)the competent authority is the regulator;

(c)waste” has the meaning given in the Asbestos Directive.

Marginal Citations

M54OJ No L 85, 28.3.1987, p 40, as last amended by Council Regulation (EC) No 807/2003 (OJ No L 122, 16.5.2003, p 36).

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Asbestos Directive—

(a)Article 3;

(b)Article 4(1);

(c)Article 5;

(d)Article 6(1) and (2);

(e)Article 8.

(2) When interpreting the Asbestos Directive for the purposes of this paragraph, in Article 6(1), “regular intervals” means, for the purposes of a regulated facility to which Article 4 applies, intervals of not more than 6 months.

Regulation 35(2)(k)

SCHEDULE 17E+W+STitanium dioxide

ApplicationE+W+S

1.  This Schedule applies in relation to every regulated facility where the chlorine process or the sulphate process is carried on.

InterpretationE+W+S

2.—(1) In this Schedule—

the Titanium Dioxide Directive” means Council Directive 92/112/EEC on procedures for harmonizing the programmes for the reduction and eventual elimination of pollution caused by waste from the titanium dioxide industry M55; and

chlorine process” and “sulphate process” have the same meaning as in Article 2 of the Titanium Dioxide Directive.

(2) When interpreting the Titanium Dioxide Directive for the purposes of this Schedule, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part.

Marginal Citations

M55OJ No L 409, 31.12.1992, p 11. There is a relevant corrigendum, OJ No L 48, 26.2.1993, p 68.

Exercise of relevant functionsE+W+S

3.  The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Titanium Dioxide Directive—

(a)Article 4;

(b)Article 6;

(c)Article 9;

(d)Article 10;

(e)Article 11.

Regulation 35(2)(l)

SCHEDULE 18E+W+SPetrol vapour recovery

ApplicationE+W+S

1.  This Schedule applies in relation to every Part B activity falling within paragraphs (b) and (c) of Part B of Section 1.2 of Part 2 of Schedule 1.

InterpretationE+W+S

2.  In this Schedule, “the Petrol Vapour Recovery Directive” means European Parliament and Council Directive 94/63/EC on the control of volatile organic compound (VOC) emissions resulting from the storage of petrol and its distribution from terminals to service stations M56.

Marginal Citations

M56OJ No L 365, 31.12.1994, p 24, as amended by Regulation (EC) No 1882/2003 (OJ No L 284, 31.10.2003, p 1).

Exercise of relevant functionsE+W+S

3.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Petrol Vapour Recovery Directive—

(a)Article 3(1), first paragraph;

(b)Article 4(1), first and last paragraphs, and 4(3);

(c)Article 6(1), first paragraph.

(2) When interpreting the Petrol Vapour Recovery Directive for the purposes of this paragraph—

(a)in point 1 of Annex I, “special landscape areas which have been designated by national authority” includes the Broads, the New Forest and any National Park or Area of Outstanding Natural Beauty; and

(b)ignore points 2.3, 3.2 and 3.5 of Annex IV.

Regulation 35(2)(m)

SCHEDULE 19E+W+SWaste batteries and accumulators

ApplicationE+W+S

1.  This Schedule applies in relation to waste batteries and accumulators.

Exercise of relevant functionsE+W+S

2.  The regulator must exercise its relevant functions so as to ensure compliance with Article 12(2) of the Batteries Directive.

Regulation 35(2)(n)

SCHEDULE 20E+W+SMining waste operations

ApplicationE+W+S

1.  This Schedule applies in relation to every mining waste operation.

InterpretationE+W+S

2.—(1) In this Schedule—

mining waste facility” means a “waste facility” as defined in Article 3(15) of the Mining Waste Directive but excludes those facilities mentioned in Article 24(2) or in the first paragraph of Article 24(4) of that Directive;

mining waste operation” means the management of extractive waste, whether or not involving a mining waste facility, but does not include the activities in Article 2(2)(c) of the Mining Waste Directive;

relevant emergency planner” means, in relation to an application for a mining waste facility that is located in—

(a)

London, the London Fire and Emergency Planning Authority,

(b)

an area where there is a fire and civil defence authority, that authority,

(c)

the Isles of Scilly, the Council of the Isles of Scilly,

(d)

an area in the rest of England, the county council for that area or where there is no county council for that area, the district council for that area,

(e)

an area in Wales, the county council or county borough council for that area; and

waste management plan” means a plan of the type described in Article 5(1) of the Mining Waste Directive which has the objectives in Article 5(2) and contains the elements and information set out in Article 5(3) of that Directive.

(2) When interpreting the Mining Waste Directive for the purposes of this Schedule—

(a)except where otherwise defined in this paragraph, an expression that is defined in Part 1 of these Regulations has the meaning given in that Part;

(b)permit” means an environmental permit; and

(c)the competent authority is the regulator.

Applications for grant or variation of an environmental permitE+W+S

3.—(1) The regulator must require that every application for the grant or variation of an environmental permit in relation to a mining waste operation involving a mining waste facility to which Article 7 of the Mining Waste Directive applies includes—

(a)the information specified in Article 7(2) of that Directive; and

(b)where Article 6 of the Directive applies, the information mentioned in the second sentence of the third paragraph of Article 6(3).

(2) Where the regulator receives an application for the grant or variation of an environmental permit and that application includes the information required under sub-paragraph (1)(b), the regulator must immediately forward the information to the relevant emergency planner.

(3) The regulator must require that every application for the grant or variation of an environmental permit in relation to any other mining waste operation includes a waste management plan.

(4) For the purposes of this paragraph, the regulator may accept a waste management plan produced pursuant to other legislation which complies with Article 5(1) to (4) of the Mining Waste Directive if it has been reviewed and amended in accordance with Article 5(4) of that Directive.

Review of environmental permitsE+W+S

4.  The regulator must periodically review an environmental permit relating to a mining waste facility if Article 7 of the Mining Waste Directive applies in respect of that facility and any of the circumstances in Article 7(4) of the Directive apply in relation to it.

Classification of mining waste facilitiesE+W+S

5.  The regulator must exercise its functions so as to ensure compliance with Article 9 of the Mining Waste Directive in respect of any mining waste facility to which Article 7 of that Directive does not apply.

InspectionsE+W+S

6.  The regulator must inspect every mining waste facility to which Article 7 of the Mining Waste Directive applies so as to comply with the requirements of Article 17(1) of that Directive.

Exercise of relevant functionsE+W+S

7.  The regulator must exercise its relevant functions so as to ensure compliance with the following requirements of the Mining Waste Directive—

(a)Article 2(4);

(b)Article 4;

(c)Article 5(4) and (6);

(d)Article 6(2), the first and second paragraphs of Article 6(3), the first paragraph of Article 6(4) to the extent that it relates to plans prepared under the first paragraph of Article 6(3) and the second paragraph of Article 6(4) to the extent that it relates to the regulator's functions;

(e)Article 7(1) and (3)(a);

(f)Article 10;

(g)Article 11;

(h)Article 12;

(i)Article 13;

(j)Article 14 (1) to (3);

(k)Article 17(2);

(l)Article 24(1).

Public participationE+W+S

8.  The regulator must exercise its functions under the public participation provisions in relation to mining waste facilities to which Article 7 of the Mining Waste Directive applies so as to meet the requirements of Article 8 of that Directive.

Derogation from requirementsE+W+S

9.—(1) The regulator must exercise its functions to ensure that the requirements mentioned in the first paragraph of Article 2(3) of the Mining Waste Directive do not apply to the substances mentioned in that paragraph where they result from an operation mentioned in that paragraph, to the extent allowed by that paragraph.

(2) The regulator must waive the requirements of the Mining Waste Directive in relation to the deposit of the substances mentioned in the second paragraph of Article 2(3) of that Directive if the regulator is satisfied that the requirements of Article 4 of that Directive are met.

(3) The regulator must waive the requirements mentioned in the third paragraph of Article 2(3) of the Mining Waste Directive in relation to the waste mentioned in that paragraph to the extent allowed by that paragraph.

Closure of a mining waste facilityE+W+S

10.—(1) The regulator must set out any reasoned decision under Article 12(2)(c) of the Mining Waste Directive in a closure notice served on the operator.

(2) A closure notice must, in addition to stating the regulator's reasons for requiring initiation of the closure procedure, specify—

(a)the steps the operator is required to take to initiate the procedure; and

(b)the period within which they must be taken.

(3) The regulator may withdraw a closure notice at any time by further notice served on the operator.

(4) Closure of a mining waste facility does not relieve the operator of liability under the environmental permit conditions that relate to the facility.

(5) The regulator must exercise its functions so as to ensure compliance with Article 14(4) of the Mining Waste Directive.

Inventory of closed mining waste facilitiesE+W+S

11.  The regulator must maintain and make available to the public an inventory of closed mining waste facilities so as to ensure compliance with Article 20 of the Mining Waste Directive.

Developments in best available techniquesE+W+S

12.—(1) The regulator must ensure that it is informed of developments in best available techniques.

(2) In this paragraph, “best available techniques” has the meaning given in Article 2(12) of the IPPC Directive.

Planning permission requirements and conditionsE+W+S

13.—(1) Following an application under regulation 13(1), the regulator must not grant an environmental permit in relation to a mining waste facility to which Article 7 of the Mining Waste Directive applies if use of the site as a mining waste facility requires planning permission and no such permission is in force.

(2) Where—

(a)a mining waste operation is the subject of an environmental permit;

(b)that operation has been granted planning permission subject to conditions (“planning conditions”); and

(c)there is an inconsistency between the environmental permit conditions and the planning conditions,

the environmental permit conditions prevail.

(3) In this paragraph, “planning permission” means planning permission under the Town and Country Planning Act 1990 M57 and includes—

(a)a certificate under section 191 of that Act; and

(b)an established use certificate under section 192 of that Act, as originally enacted, which continues to have effect for the purposes of subsection (4) of that section.

Marginal Citations

M571990 c. 8. Sections 191 and 192 were amended by the Planning and Compensation Act 1991 (c. 34), section 10(1).

Applications for grant or variation of an environmental permit for a Category A mining waste facilityE+W+S

14.—(1) The regulator must not grant an application for the grant or variation of an environmental permit relating to a Category A mining waste facility until it has been notified by the relevant emergency planner that it has the information necessary to enable it to draw up an external emergency plan.

(2) The regulator must refuse an application relating to a Category A mining waste facility that is an existing mining waste facility upon receipt of a notice by the relevant emergency planner stating that the operator has not provided the information necessary to enable the relevant emergency planner to draw up an external emergency plan.

(3) In this paragraph, “external emergency plan” means a plan as required under the third paragraph of Article 6(3) of the Mining Waste Directive that has the objectives specified in the first paragraph of Article 6(4) of that Directive.

Regulation 35(2)(o)

SCHEDULE 21E+W+SWater discharge activities

ApplicationE+W+S

1.  This Schedule applies in relation to every water discharge activity.

InterpretationE+W+S

2.  In this Schedule—

discharging sewer” means the sewer or works from which sewage effluent is discharged;

discharging undertaker” means the sewerage undertaker in which a discharging sewer is vested;

main connection” has the same meaning as in section 110A of the Water Industry Act 1991 M58;

pipe” has the same meaning as in the 1991 Act;

sending undertaker” means a sewerage undertaker which discharges sewage effluent into the discharging sewer or other sewer or works vested in the discharging undertaker; and

“waste” in the term “waste matter” includes—

(a)

anything that is waste for the purposes of the Waste Framework Directive and is not excluded from the scope of that Directive by Article 2(1) [F28, (2) or (3)] of that Directive,

(b)

anything that is waste for the purposes of the Mining Waste Directive and is not excluded from the scope of that Directive by Article 2(2) of that Directive.

Textual Amendments

Marginal Citations

M58Section 110A was inserted by the Competition and Service (Utilities) Act 1992 (c. 43), section 45 and amended by the Water Act 2003 (c. 37), section 36(2) and the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 104.

Meaning of “water discharge activity”E+W+S

3.—(1) A “water discharge activity” means any of the following—

(a)the discharge or entry to inland freshwaters, coastal waters or relevant territorial waters of any—

(i)poisonous, noxious or polluting matter,

(ii)waste matter, or

(iii)trade effluent or sewage effluent;

(b)the discharge from land through a pipe into the sea outside the seaward limits of relevant territorial waters of any trade effluent or sewage effluent;

(c)the removal from any part of the bottom, channel or bed of any inland freshwaters of a deposit accumulated by reason of any dam, weir or sluice holding back the waters, by causing it to be carried away in suspension in the waters, unless the activity is carried on in the exercise of a power conferred by or under any enactment relating to land drainage, flood prevention or navigation;

(d)the cutting or uprooting of a substantial amount of vegetation in any inland freshwaters or so near to any such waters that it falls into them and failure to take reasonable steps to remove the vegetation from these waters;

(e)an activity in respect of which a notice under paragraph 4 or 5 has been served and has taken effect.

(2) A discharge or an activity that might lead to a discharge is not a “water discharge activity”—

(a)if the discharge is made, or authorised to be made, by or under any prescribed statutory provision; or

(b)if the discharge is of trade effluent or sewage effluent from a vessel.

(3) In determining whether a discharge or an activity is a water discharge activity, no account must be taken of any radioactivity possessed by any substance or article or by any part of any premises.

Highway drains – notice requiring environmental permitE+W+S

4.—(1) This paragraph applies where—

(a)a person is operating a highway drain; and

(b)that activity might lead to a discharge mentioned in paragraph 3(1)(a) or (b).

(2) The regulator may serve a notice on the person operating the highway drain requiring the person, from the date the notice takes effect, to hold an environmental permit authorising the carrying on of that activity.

(3) A notice under this paragraph takes effect on the date specified in it, which must be at least 6 months after it is served.

Discharge of trade effluent or sewage effluent into lake or pond – notice requiring environmental permitE+W+S

5.—(1) The regulator may serve a notice on a person who discharges trade effluent or sewage effluent into the waters of any lake or pond which are not inland freshwaters requiring the person, from the date the notice takes effect, to hold an environmental permit authorising the carrying on of that activity.

(2) A notice under this paragraph takes effect on the date specified in it, which must be at least 3 months after it is served.

Liability resulting from discharge of sewage effluent from public sewerE+W+S

6.—(1) This paragraph applies for the purpose of determining liability for a water discharge activity that consists of a discharge of sewage effluent from a discharging sewer vested in a discharging undertaker.

(2) A discharging undertaker causes a discharge of sewage effluent if—

(a)matter included in the discharge is received by the discharging undertaker into the discharging sewer or into any other sewer or works vested in it;

(b)the discharging undertaker was bound (either unconditionally or subject to conditions which were observed) to receive the matter into the discharging sewer or other sewer or works; and

(c)sub-paragraph (3) does not apply.

(3) This sub-paragraph applies if, before the discharging undertaker discharges the sewage effluent from the discharging sewer, the sending undertaker, under an agreement with the discharging undertaker under section 110A of the Water Industry Act 1991, discharges the sewage effluent through a main connection into—

(a)the discharging sewer; or

(b)any other sewer or works vested in the discharging undertaker.

(4) If sub-paragraph (3) applies, the sending undertaker causes the discharge if—

(a)matter included in the discharge is received by the sending undertaker into a sewer or works vested in it; and

(b)it was bound (either conditionally or subject to conditions which were observed) to receive that matter into that sewer or works.

(5) A sewerage undertaker is not guilty of an offence under regulation 38(1) in relation to a water discharge activity that consists of a discharge of sewage effluent from a sewer or works vested in it if—

(a)the contravention is attributable to a discharge which another person caused or knowingly permitted to be made into the sewer or works;

(b)the undertaker either was not bound to receive the discharge into the sewer or works or was bound to receive it there subject to conditions which were not observed; and

(c)the undertaker could not reasonably have been expected to prevent the discharge into the sewer or works.

(6) A person is not guilty of an offence under regulation 38(1) in relation to a discharge which the person caused or knowingly permitted to be made into a sewer or works vested in a sewerage undertaker if that undertaker was bound to receive the discharge, either unconditionally or subject to conditions which were observed.

Regulation 35(2)(p)

SCHEDULE 22E+W+SGroundwater activities

ApplicationE+W+S

1.  This Schedule applies in relation to every groundwater activity.

InterpretationE+W+S

2.  In this Schedule—

body of groundwater” has the same meaning as in the Water Framework Directive;

direct input” in relation to groundwater means the introduction of a pollutant to groundwater without percolation through soil or subsoil;

Groundwater Daughter Directive” means Directive 2006/118/EC of the European Parliament and of the Council on the protection of groundwater against pollution and deterioration M59;

Groundwater Directive” means Council Directive 80/68/EEC on the protection of groundwater against pollution caused by certain dangerous substances M60;

indirect input” in relation to groundwater means the introduction of a pollutant to groundwater after percolation through soil or subsoil; and

surface waters” has the same meaning as in the Water Framework Directive.

Marginal Citations

M59OJ No L 372, 27.12.2006, p 19.

M60OJ No L 20, 26.1.1980, p 43.

Meaning of “groundwater activity”E+W+S

3.—(1) Subject to sub-paragraphs (2) and (3), “groundwater activity” means any of the following—

(a)the discharge of a pollutant that results in the direct input of that pollutant to groundwater;

(b)the discharge of a pollutant in circumstances that might lead to an indirect input of that pollutant to groundwater;

(c)any other discharge that might lead to the direct or indirect input of a pollutant to groundwater;

(d)an activity in respect of which a notice under paragraph 10 has been served and has taken effect;

(e)an activity that might lead to a discharge mentioned in paragraph (a), (b) or (c), where that activity is carried on as part of the operation of a regulated facility of another class.

(2) A discharge or an activity that might lead to a discharge is not a “groundwater activity” if the discharge is—

(a)made, or authorised to be made, by or under any prescribed statutory provision; or

(b)of trade effluent or sewage effluent from a vessel.

(3) The regulator may determine that a discharge, or an activity that might lead to a discharge, is not a groundwater activity if the input of the pollutant—

(a)is the consequence of an accident or exceptional circumstances of natural cause that could not reasonably have been foreseen, avoided or mitigated;

(b)is or would be of a quantity and concentration so small as to obviate any present or future danger of deterioration in the quality of the receiving groundwater; or

(c)is or would be incapable, for technical reasons, of being prevented or limited without using—

(i)measures that would increase risks to human health or to the quality of the environment as a whole, or

(ii)disproportionately costly measures to remove quantities of pollutants from, or otherwise control their percolation in, contaminated ground or subsoil.

(4) The regulator must keep a record of all determinations under sub-paragraph (3).

Meaning of “hazardous substance”E+W+S

4.—(1) A hazardous substance is any substance or group of substances that are toxic, persistent and liable to bio-accumulate.

(2) This includes in particular the following when they are toxic, persistent and liable to bio-accumulate—

(a)organohalogen compounds and substances which may form such compounds in the aquatic environment,

(b)organophosphorous compounds,

(c)organotin compounds,

(d)substances and preparations, or the breakdown products of such, which have been proved to possess carcinogenic or mutagenic properties or properties which may affect steroidogenic, thyroid, reproduction or other endocrine-related functions in or via the aquatic environment,

(e)persistent hydrocarbons and persistent and bioaccumulable organic toxic substances,

(f)cyanides,

(g)metals (in particular, cadmium and mercury) and their compounds,

(h)arsenic and its compounds,

(i)biocides and plant protection products.

(3) The regulator must publish a list of substances that it considers to be hazardous substances.

Meaning of “non-hazardous pollutant”E+W+S

5.  A non-hazardous pollutant is any pollutant other than a hazardous substance.

Exercise of relevant functionsE+W+S

6.  For the purposes of implementing the Groundwater Directive, the Water Framework Directive and the Groundwater Daughter Directive, the regulator must, in exercising its relevant functions, take all necessary measures—

(a)to prevent the input of any hazardous substance to groundwater; and

(b)to limit the input of non-hazardous pollutants to groundwater so as to ensure that such inputs do not cause pollution of groundwater.

Applications for grant of environmental permitE+W+S

7.—(1) This paragraph applies to an application for the grant of an environmental permit relating to—

(a)a discharge mentioned in paragraph 3(1)(a), (b) or (c); or

(b)an activity that might lead to such a discharge.

(2) When the regulator receives an application, it must ensure that all necessary investigations have been carried out to ensure that it grants any permit in accordance with paragraph 6.

(3) If it grants the permit, it must include conditions requiring all necessary technical precautions to be observed to ensure the objectives of paragraph 6 are achieved.

(4) A permit may not be granted—

(a)without examination of—

(i)the hydrogeological conditions of the area concerned,

(ii)the possible purifying powers of the soil and subsoil, and

(iii)the risk of pollution and alteration of the quality of the groundwater from the discharge, and

(b)without establishing whether the input of pollutants to groundwater is a satisfactory solution from the point of view of the environment.

(5) A permit may only be granted if the regulator has checked that the groundwater (and, in particular, its quality) will undergo the requisite surveillance.

Groundwater activities for which a permit may be grantedE+W+S

8.  Despite paragraph 6, provided it does not compromise the achievement of any of the environmental objectives relating to groundwater in Article 4 of the Water Framework Directive, the regulator may grant an environmental permit for—

(a)the injection of water containing substances resulting from the operations for exploration and extraction of hydrocarbons or mining activities, and injection of water for technical reasons, into geological formations from which hydrocarbons or other substances have been extracted or into geological formations which for natural reasons are permanently unsuitable for other purposes, provided that the injection does not contain substances other than those resulting from the above operations,

(b)the reinjection of pumped groundwater from mines and quarries or associated with the construction or maintenance of civil engineering works,

(c)the injection of natural gas or liquefied petroleum gas for storage purposes into geological formations which for natural reasons are permanently unsuitable for other purposes,

(d)the injection of natural gas or liquefied petroleum gas for storage purposes into other geological formations where there is an overriding need for security of gas supply, and where the injection is such as to prevent any present or future danger of deterioration in the quality of any receiving groundwater,

(e)construction, civil engineering and building works and similar activities on or in the ground which come into contact with groundwater,

(f)discharges of small quantities of substances for scientific purposes for characterisation, protection or remediation of bodies of water limited to the amount strictly necessary for the purposes concerned,

(g)interventions in surface waters for the purposes, amongst others, of mitigating the effects of floods and droughts, and for the management of waters and waterways,

(h)the artificial recharge or augmentation of a body of groundwater for the purposes of groundwater management,

(i)reinjection into the same aquifer of water used for geothermal purposes.

Prohibition noticeE+W+S

9.—(1) This paragraph applies where—

(a)any person is carrying on, or proposing to carry on, any activity on or in the ground; and

(b)that activity might lead to a discharge mentioned in paragraph 3(1)(a), (b) or (c).

(2) The regulator may serve a notice on the person prohibiting the carrying on of the activity.

(3) The regulator may withdraw a prohibition notice at any time by further notice served on the person.

Notice requiring environmental permitE+W+S

10.—(1) This paragraph applies where—

(a)any person is carrying on, or proposing to carry on, any activity on or in the ground; and

(b)that activity might lead to a discharge mentioned in paragraph 3(1)(a), (b) or (c).

(2) The regulator may serve a notice on the person requiring the person, from the date the notice takes effect, to hold an environmental permit authorising the carrying on of the activity.

(3) A notice under paragraph (1) takes effect on the date specified in it, but—

(a)a notice served for the purpose of paragraph 11 must not take effect until at least 6 months after it is served; and

(b)a notice served for the purpose of paragraph 12, or for any other purpose, must not take effect until at least 3 months after it is served.

Notice in relation to a highway drainE+W+S

11.  A highway authority or other person entitled to keep open a highway drain by virtue of section 100 of the 1980 Act who operates a highway drain other than under and in accordance with an environmental permit is not guilty of an offence under regulation 38(1) unless—

(a)the regulator has served a notice on that person under paragraph 10 of this Schedule; and

(b)the notice has taken effect.

Notice in relation to a domestic septic tank or sewage treatment plantE+W+S

12.  Before 1st January 2012, a person who, other than under and in accordance with an environmental permit, uses a septic tank or sewage treatment plant with a discharge of 2 cubic metres per day or less of sewage effluent that results in the input of pollutants to groundwater is not guilty of an offence under regulation 38(1) unless—

(a)the regulator has served a notice on that person under paragraph 10 of this Schedule; and

(b)the notice has taken effect.

GuidanceE+W+S

13.—(1) The appropriate authority may issue guidance to persons causing or liable to cause inputs of pollutants to groundwater with respect to the steps they must take to prevent or limit those pollutants from entering groundwater.

(2) The regulator must take into account whether or not such guidance is or is likely to be complied with before taking any enforcement action under these Regulations.

(3) Guidance must be publicised as the appropriate authority sees fit.

Liability resulting from discharge of sewage effluent from public sewerE+W+S

14.—(1) This paragraph applies for the purpose of determining liability for a groundwater activity that consists of a discharge of sewage effluent from a discharging sewer vested in a discharging undertaker.

(2) A discharging undertaker causes a discharge of sewage effluent if—

(a)matter included in the discharge is received by the discharging undertaker into the discharging sewer or into any other sewer or works vested in it;

(b)the discharging undertaker was bound (either unconditionally or subject to conditions which were observed) to receive the matter into the discharging sewer or other sewer or works; and

(c)sub-paragraph (3) does not apply.

(3) This sub-paragraph applies if, before the discharging undertaker discharges the sewage effluent from the discharging sewer, the sending undertaker, under an agreement with the discharging undertaker under section 110A of the Water Industry Act 1991, discharges the sewage effluent through a main connection into—

(a)the discharging sewer; or

(b)any other sewer or works vested in the discharging undertaker.

(4) If sub-paragraph (3) applies, the sending undertaker causes the discharge if—

(a)matter included in the discharge was received by the sending undertaker into a sewer or works vested in it; and

(b)it was bound (either conditionally or subject to conditions which were observed) to receive that matter into that sewer or works.

(5) A sewerage undertaker is not guilty of an offence under regulation 38(1) in relation to a groundwater activity that consists of a discharge of sewage effluent from a sewer or works vested in it if—

(a)the contravention is attributable to a discharge which another person caused or knowingly permitted to be made into the sewer or works;

(b)the undertaker either was not bound to receive the discharge into the sewer or works or was bound to receive it there subject to conditions which were not observed; and

(c)the undertaker could not reasonably have been expected to prevent the discharge into the sewer or works.

(6) A person is not guilty of an offence under regulation 38(1) in relation to a discharge which the person caused or knowingly permitted to be made into a sewer or works vested in a sewerage undertaker if that undertaker was bound to receive the discharge, either unconditionally or subject to conditions which were observed.

Regulation 35(2)(q)

SCHEDULE 23E+W+SRadioactive substances activities

PART 1 E+W+SApplication

ApplicationE+W+S

1.  This Schedule applies in relation to every radioactive substances activity.

PART 2 E+W+SInterpretation

InterpretationE+W+S

1.  In this Schedule—

article” includes a part of an article;

the Basic Safety Standards Directive” means Council Directive 96/29/EURATOM M61 laying down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation;

“contamination” occurs where a substance or article is so affected by—

(a)

absorption, admixture or adhesion of radioactive material or radioactive waste; or

(b)

the emission of neutrons or ionising radiations,

as to become radioactive or to possess increased radioactivity;

disposal” in relation to waste includes its removal, deposit, destruction, discharge (whether into water or into the air or into a sewer or drain or otherwise) or burial (whether underground or otherwise) and “dispose of” is to be construed accordingly;

mobile radioactive apparatus” means any apparatus, equipment, appliance or other thing which is radioactive material and—

(a)

is constructed or adapted for being transported from place to place; or

(b)

is portable and designed or intended to be used for releasing radioactive material into the environment or introducing it into organisms;

nuclear site” means—

(a)

any site in respect of which a nuclear site licence is for the time being in force; or

(b)

any site in respect of which, after the revocation or surrender of a nuclear site licence, the period of responsibility of the licensee has not yet come to an end,

and “licensee”, when used in relation to a nuclear site, and “period of responsibility” have the same meaning as in the Nuclear Installations Act 1965 M62;

premises” includes any land, whether covered by buildings or not, including any place underground and any land covered by water;

substance” means any natural or artificial substance, whether in solid or liquid form or in the form of a gas or vapour;

undertaking” includes any trade, business or profession and—

(a)

in relation to a public or local authority, includes any of the powers or duties of that authority, and

(b)

in relation to any other body of persons (whether corporate or unincorporate), includes any of the activities of that body; and

waste” has the meaning given in paragraph 3.

Marginal Citations

M61OJ L 159, 29.6.1996, p 1.

M621965 c. 57. Section 5(3) was amended by S.I. 1974/2056, regulation 2 and Schedule 2, paragraph 1.

Interpretation: radioactive materialE+W+S

2.—(1) In this Schedule, “radioactive material” means anything which, not being waste, is either a substance to which this sub-paragraph applies or an article made wholly or partly from, or incorporating, such a substance.

(2) Sub-paragraph (1) applies to any substance which—

(a)contains an element specified in the first column of the table in sub-paragraph (4), in such a proportion that the number of becquerels of that element contained in the substance, divided by the number of grams which the substance weighs, is a number greater than that specified in relation to that element in the appropriate column of that table; or

(b)possesses radioactivity which is wholly or partly attributable to a process of nuclear fission or other process of subjecting a substance to bombardment by neutrons or to ionising radiations, not being a process occurring in the course of nature, or in consequence of the disposal of radioactive waste, or by way of contamination in the course of the application of a process to some other substance.

(3) In sub-paragraph (2)(a), “the appropriate column” means—

(a)in relation to a solid substance, the second column;

(b)in relation to a liquid substance, the third column;

(c)in relation to a substance which is a gas or vapour, the fourth column.

(4) The table referred to in sub-paragraph (2)(a)—

Specified elements
ElementBecquerels per gram (Bq g (to the power of -1))
SolidLiquidGas or Vapour
1. Actinium0.377.40 x (10 to the power of -2)2.59 x (10 to the power of -6)
2. Lead0.743.70 x (10 to the power of -3)1.11 x (10 to the power of -4)
3. Polonium0.372.59 x (10 to the power of -2)2.22 x (10 to the power of -4)
4. Protoactinium0.373.33 x (10 to the power of -2)1.11 x (10 to the power of -6)
5. Radium0.373.70 x (10 to the power of -4)3.70 x (10 to the power of -5)
6. Radon--3.70 x (10 to the power of -2)
7. Thorium2.593.70 x (10 to the power of -2)2.22 x (10 to the power of -5)
8. Uranium11.10.747.40 x (10 to the power of -5)

Interpretation: wasteE+W+S

3.  In this Schedule—

(a)waste” includes—

(i)any substance which constitutes scrap material or an effluent or other unwanted surplus substance arising from the application of any process, and

(ii)any substance or article which requires to be disposed of as being broken, worn out, contaminated or otherwise spoilt; and

(b)any substance or article which, in the course of carrying on any undertaking, is discharged, discarded or otherwise dealt with as if it were waste is presumed to be waste unless the contrary is proved.

Interpretation: radioactive wasteE+W+S

4.  In this Schedule, “radioactive waste” means waste which consists wholly or partly of—

(a)a substance or article which, if it were not waste, would be radioactive material;

(b)a substance or article which has been contaminated in the course of the production, keeping or use of radioactive material, or by contact with or proximity to other waste falling within sub-paragraph (a) or this sub-paragraph.

Interpretation: radioactive substances activity

5.—(1) Subject to paragraphs 6 and 7, “radioactive substances activity” means an activity described in sub-paragraph (2), (4), (5) or (6).E+W+S

(2) A radioactive substances activity is carried on where a person uses premises for the purposes of an undertaking and that person—

(a)except where sub-paragraph (5) applies, keeps or uses radioactive material on those premises;

(b)disposes of radioactive waste on or from those premises; or

(c)accumulates radioactive waste on those premises,

knowing or having reasonable grounds for believing the material or waste to be radioactive material or radioactive waste.

(3) For the purposes of sub-paragraph (2)(c), where—

(a)radioactive material is produced, kept or used on any premises;

(b)any substance arising from the production, keeping or use of that material is accumulated in a part of the premises appropriated for the purpose; and

(c)that substance is retained there for a period of not less than 3 months,

that substance, unless the contrary is proved, is presumed to be radioactive waste.

(4) A radioactive substances activity is carried on where, in the course of a person carrying on an undertaking, that person—

(a)receives radioactive waste for the purposes of disposing of that waste; and

(b)knows or has reasonable grounds for believing the waste to be radioactive waste.

(5) A radioactive substances activity is carried on where a person keeps or uses mobile radioactive apparatus for—

(a)testing, measuring or otherwise investigating any of the characteristics of substances or articles; or

(b)releasing quantities of radioactive material into the environment or introducing such material into organisms.

(6) A radioactive substances activity is carried on where a person carries out intrusive investigation work or other excavation, construction or building work—

(a)to determine the suitability of any premises; or

(b)to enable the use of any premises,

as a place that may be used wholly or substantially for underground disposal.

(7) In sub-paragraph (6)—

intrusive investigation work” means the drilling of boreholes into, or excavation of, sub-soil or rock to determine geological or hydrogeological conditions; and

underground disposal” means—

(a)

the disposal of solid radioactive waste in an engineered facility, or in part of an engineered facility, which is beneath the surface of the ground, and

(b)

where the natural environment which surrounds the facility acts, in combination with any engineered measures, to inhibit the transit of radionuclides from the facility to the surface,

and does not include the disposal of radioactive waste in a facility which is beneath the surface of the ground only by virtue of the placing of rocks or soil above it.

Nuclear sites

6.—(1) Paragraph 5(2)(a) does not apply to the activity carried on by a licensee of a nuclear site on any premises situated on that site at any time—E+W+S

(a)while a nuclear site licence is in force in respect of that site; and

(b)after the revocation or surrender of such a licence but before the period of responsibility of the licensee has come to an end.

(2) In respect of any premises which—

(a)are situated on a nuclear site; but

(b)have ceased to be used for the purposes of an undertaking carried on by the licensee,

paragraph 5(2)(b) applies to those premises as if the premises were used for the purposes of an undertaking carried on by the licensee.

(3) Paragraph 5(2)(c) does not apply to the accumulation of radioactive waste on any premises situated on a nuclear site.

Vehicles, vessels and aircraft

7.  In determining whether any radioactive material is kept or used on any premises, no account must be taken of any radioactive material kept or used in or on any railway vehicle, road vehicle, vessel or aircraft if—E+W+S

(a)the vehicle, vessel or aircraft is on the premises in the course of a journey; or

(b)in the case of a vessel which is on those premises otherwise than in the normal course of a journey, the material is used in propelling the vessel or is kept in or on the vessel for use in propelling it.

PART 3 E+W+SThe Basic Safety Standards Directive

SECTION 1E+W+SExposures and doses

1.  In respect of a radioactive substances activity that relates to radioactive waste, the regulator must exercise its relevant functions to ensure that—E+W+S

(a)all exposures to ionising radiation of any member of the public and of the population as a whole resulting from the disposal of radioactive waste are kept as low as reasonably achievable, taking into account economic and social factors; and

(b)the sum of the doses resulting from the exposure of any member of the public to ionising radiation does not exceed the dose limits set out in Article 13 of the Basic Safety Standards Directive subject to the exclusions set out in Article 6(4) of that Directive.

2.—(1) In exercising those relevant functions in relation to the planning stage of radiation protection, the regulator must have regard to the following maximum doses to individuals which may result from a defined source—E+W+S

(a)0.3 millisieverts per year from any source from which radioactive discharges are first made on or after 13th May 2000; or

(b)0.5 millisieverts per year from the discharges from any single site.

(2) In exercising those relevant functions, the regulator must observe the following requirements of the Basic Safety Standards Directive—

(a)in estimating effective dose and equivalent dose, Articles 15 and 16;

(b)in estimating population doses, Article 45; and

(c)in relation to the responsibilities of undertakings, Article 47.

SECTION 2E+W+SInterventions

Radioactive waste: power of the Secretary of State to provide facilities for disposal or accumulationE+W+S

3.—(1) If it appears to the Secretary of State that adequate facilities are not available for the safe disposal or accumulation of radioactive waste, the Secretary of State may—

(a)provide such facilities; or

(b)make arrangements for their provision by such persons as the Secretary of State may think fit.

(2) Before exercising the power under sub-paragraph (1), the Secretary of State must consult with—

(a)any local authority in whose area the facilities would be situated; and

(b)such other public or local authorities (if any) as appear to the Secretary of State to be proper to be consulted.

(3) Reasonable charges for the use of any facilities provided under sub-paragraph (1) may be made by—

(a)the Secretary of State; or

(b)the person providing such facilities, unless the arrangements made by the Secretary of State with that person provide to the contrary.

Radioactive waste: power of disposal by the regulatorE+W+S

4.—(1) Sub-paragraph (2) applies if there is radioactive waste on any premises and the regulator is satisfied that the waste ought to be disposed of but it is unlikely that the waste will be lawfully disposed of—

(a)because the premises are unoccupied;

(b)because the occupier is absent or insolvent; or

(c)for any other reason.

(2) The regulator may dispose of the waste and recover any expenses it reasonably incurs in that disposal from—

(a)the occupier of the premises;

(b)if the premises are unoccupied, the owner of the premises.

(3) In sub-paragraph (2)—

(a)owner” has the same meaning as in section 343 of the Public Health Act 1936 M63; and

(b)the provisions of section 294 of that Act (which limits the liability of owners who are only agents or trustees) apply but as if reference in that section to a council recovering expenses under that Act were to the regulator recovering expenses under sub-paragraph (2).

Marginal Citations

PART 4 E+W+SThe HASS Directive

SECTION 1E+W+SSecurity of sources

InterpretationE+W+S

1.  In this Part—

the HASS Directive” means Council Directive 2003/122/EURATOM M64 on the control of high-activity sealed radioactive sources and orphan sources;

high-activity or similar source” means—

(a)

a high-activity source; or

(b)

such other sealed source which, in the opinion of the regulator, is of a similar level of potential hazard to a high-activity source;

high-activity source” has the same meaning as in the HASS Directive but excluding any such source once its activity level has fallen below the exemption levels specified in column 2 of Table A to Annex I to the Basic Safety Standards Directive;

orphan source” has the same meaning as in the HASS Directive; and

sealed source” has the same meaning as in the HASS Directive.

Marginal Citations

M64OJ No L 346, 31.12.2003, p 57.

Site security: inspectionE+W+S

2.—(1) In exercising relevant functions in relation to a radioactive substances activity, the regulator must comply with sub-paragraph (3) where a high-activity or similar source is, or will be, kept, used, disposed of or accumulated on any premises.

(2) Sub-paragraph (1) does not apply where the premises are, or are part of, a nuclear site.

(3) In considering if the measures taken, or to be taken, by the operator ensure the adequate security of any premises, the regulator must where appropriate inspect those premises.

(4) Where the regulator inspects any premises under sub-paragraph (3), it may be accompanied by such other persons as are appropriate to assist it in assessing the measures.

(5) An operator must permit the regulator (and any person accompanying it) reasonable access to any premises the regulator wishes to inspect under sub-paragraph (3).

(6) If the operator fails to comply with sub-paragraph (5), the regulator may refuse the application or revoke the permit insofar as it relates to the sources referred to in sub-paragraph (1).

Site security: security measures and adviceE+W+S

3.—(1) In exercising relevant functions in relation to a radioactive substances activity, the regulator must comply with sub-paragraph (2) where a high-activity or similar source is, or will be, kept, used, disposed of or accumulated on any premises.

(2) The regulator—

(a)must be satisfied that there are in place measures concerning site security, including the security measures in sub-paragraph (3), as are appropriate to the source and premises in question;

(b)where it considers it appropriate to do so, must consult the police, security services or other appropriate persons on site security;

(c)must have regard to any advice given by them, if it is issued within such time as the regulator believes is reasonable before it exercises a relevant function; and

(d)must impose appropriate environmental permit conditions concerning site security.

(3) The security measures referred to in sub-paragraph (2)(a) are—

(a)measures to ensure the physical security of the premises, including the installation of alarm and detection systems, and the retaining of documentary evidence of those measures;

(b)measures, which are evidenced in writing—

(i)to prevent unauthorised access to, or loss or theft of, a high-activity or similar source;

(ii)to detect such matters; and

(iii)to review and enhance the physical security of the premises in response to any increased risk of unauthorised access, loss or theft;

(c)written procedures to ensure that before a person is authorised to have access to a high-activity or similar source—

(i)that person has passed checks to verify their identity, and

(ii)satisfactory written references have been obtained which confirm, as far as reasonably practicable, that there is no information to indicate that the person presents any security risk to the sources; and

(d)measures to keep secure, and prevent unauthorised access to, information relating to—

(i)a high-activity or similar source, and

(ii)the measures referred to in paragraphs (a), (b) and (c).

SECTION 2E+W+SAdvice and assistance in relation to orphan sources

Advice and assistance in respect of orphan sourcesE+W+S

4.—(1) The relevant person must ensure that specialised technical advice and assistance is promptly made available to persons who—

(a)are not normally involved in operations subject to radiation protection requirements, and

(b)suspect the presence of an orphan source.

(2) The relevant person must ensure that the primary aim of such advice and assistance is—

(a)the safety of the source; and

(b)protecting the public and workers from radiation.

(3) The relevant person means—

(a)in relation to the protection of workers, the Secretary of State;

(b)in relation to the protection of the public (other than workers)—

(i)in England, the Secretary of State,

(ii)in Wales, the Welsh Ministers.

SECTION 3E+W+SExercise of relevant functions and matters in relation to orphan sources

GeneralE+W+S

5.—(1) In exercising relevant functions in relation to a radioactive substances activity, the regulator must comply with the following provisions of the HASS Directive—

(a)Article 3(2) and (3);

(b)Article 4;

(c)Article 5(1) and (2);

(d)Article 6;

(e)subject to sub-paragraph (2), Article 7(1) and (2).

(2) In relation to a high-activity source placed on the market before 31st December 2005, sub-paragraph (1)(e) has effect as if it referred to the provisions contained in Article 16(1)(b) of the HASS Directive.

Records and inspectionsE+W+S

6.  In relation to a high-activity source, the regulator must—

(a)keep records of those matters—

(i)required by Article 5(3) and (4) of the HASS Directive; and

(ii)notified to it under Article 6 of that Directive;

and

(b)establish or maintain a system of inspections to enforce the following provisions of the HASS Directive—

(i)Articles 3 to 6;

(ii)as appropriate, Article 7(1) and (2) or Article 16(1)(b).

Training and informationE+W+S

7.—(1) In relation to a high-activity source, the appropriate training and adequate information required by the Ionising Radiations Regulations 1999 M65 must include—

(a)specific requirements for the safe management of such a source;

(b)particular emphasis on the necessary safety requirements in relation to such a source; and

(c)specific information on possible consequences of the loss of adequate control of such a source.

(2) The training and information on the matters in sub-paragraph (1) must be repeated at regular intervals and documented, with a view to preparing the employees and other persons referred to in those Regulations for such matters.

Marginal Citations

Orphan sourcesE+W+S

8.—(1) The regulator must—

(a)be prepared, or have made provision (including the assignment of responsibilities), to recover any orphan source; and

(b)have drawn up appropriate response plans and measures.

(2) The regulator may recover any expenses reasonably incurred by it in the recovery and disposal of an orphan source from—

(a)the person carrying on the radioactive substances activity involving that source; or

(b)the occupier or owner of the premises where the source is located.

(3) In relation to sub-paragraph (2)—

(a)owner” has the same meaning as in section 343 of the Public Health Act 1936 M66; and

(b)the provisions of section 294 of that Act (which limits the liability of owners who are only agents or trustees) apply but as if reference in that section to a council recovering expenses under that Act were to the regulator recovering expenses under sub-paragraph (2).

Marginal Citations

PART 5 E+W+SConditions in environmental permits

Posting on premises of environmental permitsE+W+S

1.—(1) Subject to sub-paragraph (3), the regulator must impose environmental permit display conditions on an environmental permit granted under these Regulations if the permit—

(a)relates to a radioactive substances activity described in paragraph 5(2) of Part 2 of this Schedule; and

(b)does not relate to a sealed source.

(2) Despite regulation 69(b), where an existing radioactive substances permit—

(a)becomes an environmental permit by virtue of regulation 69(a); and

(b)does not relate to a sealed source,

the environmental permit has effect subject to environmental permit display conditions in addition to any conditions that applied to it at the relevant time.

(3) The regulator, if required to do so on the grounds of national security by any direction or guidance issued to it under these Regulations or under any other enactment—

(a)must vary or revoke environmental permit display conditions or any similar environmental permit conditions that applied to an existing radioactive substances permit at the relevant time; or

(b)must not impose such conditions.

(4) In this paragraph—

environmental permit display conditions” means a requirement that the operator—

(a)

keep copies of the permit posted on the premises, and

(b)

post the permit in such characters and positions as to be conveniently read by persons who have duties on the premises which are or could be affected by the matters set out in the permit; and

existing radioactive substances permit” means—

(a)

an authorisation under section 13 or 14 of the 1993 Act, or

(b)

a registration under section 7 of the 1993 Act.

Regulation 46(1)

SCHEDULE 24E+W+SPublic registers

Matters to be included in a public registerE+W+S

1.—(1) A public register must contain a copy of—

(a)every application for—

(i)the grant of an environmental permit,

(ii)the variation of an environmental permit,

(iii)the transfer of an environmental permit in whole or in part, or

(iv)the surrender of an environmental permit in whole or in part;

(b)every notice requesting further information under paragraph 4(1) of Part 1 of Schedule 5;

(c)all representations made in respect of an application for the grant or variation of an environmental permit;

(d)every environmental permit, variation, transfer in whole or in part, or surrender in whole or in part granted or made by the regulator;

(e)every determination or decision notified under paragraph 17(2)(a) of Part 1 of Schedule 5;

(f)every prohibition notice, enforcement notice, revocation notice, suspension notice, landfill closure notice, mining waste facility closure notice or notice withdrawing such a notice served by the regulator;

(g)in relation to an appeal to an appropriate authority, every—

(i)notice of appeal,

(ii)document relating to the appeal,

(iii)representation made in respect of the appeal, and

(iv)determination of the authority, including any report accompanying that determination;

(h)all information obtained by the regulator—

(i)as a result of its own monitoring,

(ii)as a result of monitoring required under an environmental permit condition, or

(iii)under regulation 60 in relation to monitoring;

(i)all other information given to the regulator in compliance with—

(i)an environmental permit condition,

(ii)an enforcement notice,

(iii)a suspension notice,

(iv)a landfill closure notice,

(v)a mining waste facility closure notice, or

(vi)regulation 60;

(j)every report published by the regulator relating to an assessment of the environmental consequences of the operation of an installation;

(k)every direction given to the regulator or the exemption registration authority by an appropriate authority under these Regulations, other than a direction given under regulation 47 or paragraph 9 of Schedule 2.

(2) A public register must also contain—

(a)details of any conviction or formal caution for an offence under regulation 38 in respect of an environmental permit granted by the regulator or a failure to apply to the regulator for the grant of an environmental permit;

(b)an inventory of closed mining waste facilities as required under Article 20 of the Mining Waste Directive;

(c)a list identifying all waste incineration installations—

(i)which have a capacity of less than 2 tonnes per hour, and

(ii)whose operation is authorised by an environmental permit containing conditions which give effect to the Waste Incineration Directive; and

(d)details of—

(i)all fees and charges paid to a regulator within the meaning of regulation 65 pursuant to a scheme under that regulation, and

(ii)the total expenditure of that regulator in exercising its functions under these Regulations.

(3) The regulator may omit any representation referred to in sub-paragraph (1) from its public register at the request of the person making the representation, but the regulator must then include in the public register a statement that a representation was made and was the subject of such a request.

(4) The regulator may omit from its public register any representation which substantially duplicates a representation already included in the public register, but the regulator must then include on the register a statement of the number of representations that have been omitted on this basis.

(5) If the regulator omits from its public register information referred to in sub-paragraph (1)(h) on the grounds that it is commercially or industrially confidential, the regulator must include in the public register a statement indicating whether or not there has been compliance with any environmental permit condition related to that information and requiring compliance with emission limit values.

(6) In this paragraph, “waste incineration installation” has the meaning given in Schedule 13.

Information no longer relevant for public participationE+W+S

2.  A regulator is not required to keep in its public register information which is no longer relevant for the purposes of public participation required under these Regulations.

Formal cautionsE+W+S

3.  A regulator must remove details of any formal caution from its public register 5 years after the caution was given.

Regulation 68

SCHEDULE 25E+W+SWaste and extractive waste

PART 1E+W+SInterpretation

Interpretation: generalE+W+S

1.—(1) In this Schedule—

F29...

[F30collection” has the same meaning as in Article 3(10) of the Waste Framework Directive; ”]

collection point” means a place which is used for the collection of waste by an establishment or undertaking where the establishment or undertaking does not—

(a)

receive payment for collecting the waste, or

(b)

collect waste as its main business activity;

F29...

F29...

F29...

“place of production” means, in relation to any waste, the place where the waste was originally produced;

F29...

F29...

F29...

F29...

F29...

F29...

(2) For the purposes of this Schedule, a container, lagoon or other place is secure in relation to waste kept in it if—

(a)all reasonable precautions are taken to ensure that the waste cannot escape from it; and

(b)members of the public are unable to gain access to the waste.

Textual Amendments

F29Words in Sch. 25 Pt.1 para. 1 omitted (29.3.2011) by virtue of The Waste (England and Wales) Regulations 2011 (S.I. 2011/988), reg. 1(2), Sch. 3 para. 14(a) (with regs. 2, 47(2))

Interpretation: specified functionsE+W+S

F312.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F32PART 2E+W+SRequirements of authorities

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

PART 3E+W+SOperations to which section 33(1)(a) of the 1990 Act does not apply: descriptions and conditions

GeneralE+W+S

1.—(1) The descriptions in this Part are set out in the first sub-paragraph of each paragraph.

(2) The conditions for an operation of each description are set out in the second sub-paragraph of each paragraph.

Temporary storage at the place of productionE+W+S

2.—(1) The temporary storage of any waste at the place of production, pending its collection.

(2) For the purposes of this paragraph, the conditions are—

(a)no waste is stored for longer than 12 months; and

(b)the waste is stored in a secure place.

Temporary storage of waste at a place controlled by the producerE+W+S

3.—(1) The temporary storage of any waste, pending its collection, at a place controlled by the producer of the waste.

(2) For the purposes of this paragraph, the conditions are—

(a)the producer has control over the waste and the storage place;

(b)the waste does not contain or consist of—

(i)unbonded asbestos, or

(ii)any substance with a flash point of less than 21 degrees Celsius;

(c)the operation is not carried on in the course of providing a waste management service to another person;

(d)the waste is stored in a secure place;

(e)where more than one type of waste is stored, the types are not mixed;

(f)no waste is stored for longer than 3 months;

(g)in relation to non-liquid waste, the total quantity stored at any one time does not exceed 50 cubic metres; and

(h)in relation to liquid waste—

(i)the total quantity stored at any one time does not exceed 1,000 litres,

(ii)the waste is stored in a container with secondary containment.

Temporary storage at a collection pointE+W+S

4.—(1) The temporary storage of waste at a collection point for the purposes of recovering or disposing of the waste elsewhere.

(2) For the purposes of this paragraph, the conditions are that—

(a)the waste does not contain or consist of—

(i)asbestos,

(ii)any substance with a flash point of less than 21 degrees Celsius;

(b)the waste is stored in a secure container;

(c)where more than one type of waste is stored, the types are not mixed;

(d)in relation to WEEE, the total quantity of waste stored at any one time does not exceed 30 cubic metres;

(e)in relation to non-hazardous waste that —

(i)is not WEEE, and

(ii)is to be recovered elsewhere,

the total quantity of waste stored any one time does not exceed 50 cubic metres; and

(f)in relation to waste not covered by paragraph (d) or (e), the total quantity of waste stored at any one time does not exceed 5 cubic metres.

Regulation 107

SCHEDULE 26E+W+SConsequential amendments

PART 1 E+W+SPublic General Acts

Continental Shelf Act 1964E+W+S

1.  In section 7 of the Continental Shelf Act 1964 M67(radioactive substances)—

(a)for “and any orders and regulations made thereunder” substitute “ and any orders and regulations made thereunder), or for the purposes of the Environmental Permitting (England and Wales) Regulations 2010, ”; and

(b)after “modifying the provisions of that Act” insert “ or those Regulations ”.

Nuclear Installations Act 1965E+W+S

2.—(1) The Nuclear Installations Act 1965 M68 is amended as follows.

(2) In section 3(6A) M69 (consultation before variation of nuclear site licences)—

(a)for “Great Britain” substitute “ England or Wales ”; and

(b)for “the Radioactive Substances Act 1993” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

(3) In section 4 (attachment of conditions to licences)—

(a)in subsection (1)(d) M70, for “sections 13 and 16 of the Radioactive Substances Act 1993” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”;

(b)in subsection (3A) M71

(i)for “Great Britain” substitute “ England or Wales ”, and

(ii)for “the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

M69Subsection (6A) was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 7(1).

M70Subsection (1)(d) was amended by the Radioactive Substances Act 1993 (c. 12), Schedule 4, paragraph 2.

M71Subsection (3A) was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 8.

Control of Pollution Act 1974E+W+S

3.  In section 30(5) of the Control of Pollution Act 1974 (power to apply Part 1 of that Act to radioactive waste) M72

(a)for “the Radioactive Substances Act 1960” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in paragraph (b), for “the said Act of 1960 and any other Act” substitute “ the Radioactive Substances Act 1993, the Environmental Permitting (England and Wales) Regulations 2010 and any other enactment ”.

Marginal Citations

M721974 c. 40. Section 30 was prospectively repealed by the Environmental Protection Act 1990 (c. 43), section 162 and Schedule 16, Part 2, on a date to be appointed.

Salmon and Freshwater Fisheries Act 1975E+W+S

4.  In section 5 of the Salmon and Freshwater Fisheries Act 1975 (prohibition of use of explosives etc) M73, for subsection (5)(c) substitute—

(c)regulation 38(1) of the Environmental Permitting (England and Wales) Regulations 2010;.

Marginal Citations

Environmental Protection Act 1990E+W+S

5.—(1) The 1990 Act M74 is amended as follows.

(2) In section 28(2) M75 (authorisations)—

(a)for “a registration or authorisation under the Radioactive Substances Act 1993” substitute “ an environmental permit granted under the Environmental Permitting (England and Wales) Regulations 2010 in relation to a radioactive substances activity within the meaning of those Regulations ”; and

(b)for “registration or authorisation under that Act” substitute “ environmental permit ”.

(3) In section 29 (waste on land: preliminary) M76, for subsection (12) substitute—

(12) The Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010.

(4) In the following sections, for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”

(a)section 29(13) (waste on land: preliminary);

(b)section 34(1)(aa), (1)(c)(ii) M77 and (1A)(b) (duty of care etc as respects waste);

(c)section 59(1) and (7) (powers to require removal of waste unlawfully deposited) M78;

(d)section 59ZA(2) (section 59: supplementary power) M79.

(5) For section 33(1B) (exceptions to prohibition on unauthorised disposal of waste) M80 substitute—

(1B) Subsection (1) does not apply in relation to the carrying on of any waste operation which is or forms part of an operation which—

(a)is the subject of a licence under Part 2 of the Food and Environment Protection Act 1985; or

(b)by virtue of an order under section 7 of that Act, does not require such a licence;.

(6) In the following sections, for “regulation 38(1)(a) of the 2007 Regulations” substitute “ regulation 38(1) of the Environmental Permitting Regulations ”

(a)section 33A(1)(b) (section 33 offences: investigation and enforcement costs) M81;

(b)section 33B(1)(b) (section 33 offences: clean-up costs) M82;

(c)section 33C(1)(b) (section 33 offences: forfeiture of vehicles) M83.

(7) In section 33C(7)(d), for “regulation 38(1)(a) or 38(1)(b) of the 2007 Regulations” substitute “ regulation 38(1) or (2) of the Environmental Permitting Regulations ”.

(8) In section 34B(2)(a) and (3)(a) (power to search and seize vehicles etc) M84, for “regulation 38(1)(a) or (b) of the 2007 Regulations” substitute “ regulation 38(1) or (2) of the Environmental Permitting Regulations ”.

(9) In section 78 (radioactive substances)—

(a)for “the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting Regulations (radioactive substances activities) ”; and

(b)in paragraph (b), for “the Radioactive Substances Act 1993 and any other Act” substitute “ the Environmental Permitting Regulations in relation to such radioactive waste, and any Act or other enactment, ”.

(10) In section 78YB (interaction with other enactments) M85

(a)in subsection (4), for “a consent given under Chapter II of Part III of the Water Resources Act 1991 (pollution offences)” substitute “ an environmental permit ”; and

(b)in subsection (5) M86, in the definition of “enforcement action”, for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

(11) In section 78YC (radioactivity) M87, in paragraph (b), for “the Radioactive Substances Act 1993 or any other Act” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 or any Act or other enactment ”.

(12) In section 142(7) (powers to obtain information about potentially hazardous substances), for “the Radioactive Substances Act 1993;” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 in relation to radioactive material or radioactive waste; ”.

(13) In section 156(2) (power to give effect to Community and other international obligations etc) omit “; and the provisions of the Radioactive Substances Act 1993”.

Marginal Citations

M741990 c 43.

M77Section 34 was amended by the Deregulation and Contracting Out Act 1994 (c. 40), section 33, and the Environment Act 1995 (c. 25), section 120 and Schedule 22, and by S.I. 1999/1820, 2000/1973, 2005/2900, 2006/123, 2007/3538 and 2009/1799.

M78Section 59 was amended by the Clean Neighbourhoods and Environment Act 2005 (c. 16), sections 43(2) and 50(1) and S.I. 2007/3538 and 2009/1799.

M80Section 33 was amended by the Environment Act 1995 (c. 25), section 120 and Schedule 22, the Clean Neighbourhoods and Environment Act 2005 (c. 16), sections 40(1), 41(1), 107 and Schedule 5, and S.I. 2005/894, 2006/937, 2007/3538 and 2009/1799.

M82Section 33B was inserted by the Clean Neighbourhoods and Environment Act 2005 (c. 16), section 43(1) and amended by S.I. 2006/937, 2007/3538 and 2009/1799.

M83Section 33C was inserted by the Clean Neighbourhoods Act 2005 (c. 16), section 44(1) and amended by S.I. 2006/937 and 2007/3538.

M84Section 34B was inserted by the Clean Neighbourhoods and Environment Act (c. 16), section 46(1) and amended by S.I. 2007/3538.

M85Section 78YB was inserted by the Environment Act 1995 (c. 25), section 57, and amended by the Water Act 2003 (c. 37), section 86 and S.I. 2000/1973 and 2007/3538.

M86Subsection (5) was inserted by S.I. 2007/3538, Schedule 21, paragraphs 2 and 18(b).

Atomic Weapons Establishment Act 1991E+W+S

6.  In the Schedule to the Atomic Weapons Establishment Act 1991 (application of certain enactments) M88

(a)omit paragraph 10A (Radioactive Substances Act 1993) M89 and the cross-heading preceding it; and

(b)after paragraph 10B M90 insert—

Environmental Permitting (England and Wales) Regulations 2010

10C

(1) For the purposes of the Environmental Permitting (England and Wales) Regulations 2010, so far as relating to an environmental permit for the disposal of radioactive waste, a relevant site in designated premises shall be treated as a site in respect of which a nuclear site licence is for the time being in force.

(2) For the purposes of sub-paragraph (1), “relevant site” means a site used by a contractor for the purposes of any activity which would, if section 1 of the Nuclear Installations Act 1965 applied to the site, require a nuclear site licence.

Marginal Citations

M89Paragraph 10A was inserted by the Radioactive Substances Act 1993 (c. 12), section 49(1) and Schedule 4, paragraph 10.

M90Paragraph 10B was inserted by the Clean Air Act 1993 (c. 11), section 67(1) and Schedule 4, paragraph 5.

Water Industry Act 1991E+W+S

7.  In section 138(1B) M91 of the Water Industry Act 1991 (meaning of “special category effluent”) M92

(a)in paragraph (a), for “the Environmental Permitting (England and Wales) Regulations 2007 (“the 2007 Regulations”)” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in paragraphs (aa) and (b), for “the 2007 Regulations” substitute “ those Regulations ”.

Marginal Citations

M91Subsection (1B) was inserted by S.I. 2000/1973, regulation 39 and Schedule 10.

Water Resources Act 1991E+W+S

8.—(1) The 1991 Act M93 is amended as follows.

(2) Omit the following provisions—

(a)section 85 (offences of polluting controlled waters);

(b)section 86 (prohibition of certain discharges);

(c)section 87 (discharges into and from public sewers);

(d)section 88 (defence to principal offences: authorised discharges);

(e)section 89 (other defences to principal offences);

(f)section 90 (offences: deposits and vegetation in rivers);

(g)section 90A (applications for consent under section 89 or 90) M94;

(h)section 90B (enforcement notices) M95;

(i)section 91 (appeals: consents under Chapter 2 of Part 3);

(j)section 96(3) (regulations: consents under Chapter 2 of Part 3);

(k)section 99 (consents required by the Agency);

(l)section 103 (transitional pollution provisions);

(m)section 161ZC(5) (sections 161 to 161ZB: supplementary) M96;

(n)section 161AB(4) (works notices: exceptions etc) M97;

(o)section 190(1)(b), (c), (g), (h), (j), (k), (m) and (n) and (5) (pollution control register);

(p)section 191B(2)(a), (2)(b) and (12) (exclusion from register: confidential information) M98;

(q)Schedule 10 (discharge consents);

(r)Schedule 13 (transitional water pollution provisions).

(3) In the following provisions, for each reference to “consent” substitute “ environmental permit ”

(a)section 74(1)(e) and (2)(g) (provisions and duration of ordinary drought order);

(b)section 77(3)(b) and (5)(a) (provisions of drought order: abstractions and discharges);

(c)in Schedule 8 (proceedings on applications for drought orders), in paragraph 1(2), paragraph (d) of the third item in the table;

(d)in Schedule 9 (compensation in respect of drought orders), paragraphs 2(5) and 4(1)(d).

(4) In section 84 (general duties to achieve and maintain objectives)—

(a)in subsection (1), after “below)” insert “ and by the Environmental Permitting Regulations ”;

(b)in subsection (2), after “this Act” insert “ or under the Environmental Permitting Regulations ”.

(5) In section 92(2)(c), for each reference to “subsection (6) of section 85 above” substitute “ regulation 39(1) of the Environmental Permitting Regulations ”.

(6) In section 97(2) (codes of good agricultural practice), for paragraph (a) substitute—

(a)its relevant functions, in relation to water discharge activities, under the Environmental Permitting Regulations;.

(7) In section 98 (radioactive substances)—

(a)in subsection (1), for “the Radioactive Substances Act 1993” substitute “ the Environmental Permitting Regulations ”; and

(b)in subsection (2), for “the said Act of 1993” substitute “ the Environmental Permitting Regulations ”.

(8) In the following sections, for each reference to “a consent given under Chapter II of Part III of this Act” substitute “ an environmental permit ”

(a)section 161ZC(1) (sections 161 to 161ZB: supplementary) M99;

(b)section 161AB(1) (works notices: exceptions etc) M100.

(9) In section 191B (exclusion from registers of confidential information) M101, for subsection (6) substitute—

(6) Section 114 of the 1995 Act (delegation or reference to appeals etc) applies to any appeal brought under subsection (5).

(6A) If either party to the appeal so requests, or the Secretary of State or Welsh Ministers so decide, an appeal shall be or continue in the form of a hearing (which must be held in private).

(6B) The Secretary of State may by regulations make provision as to appeals under subsection (5) to the Secretary of State, and the Welsh Ministers may by regulations make provision as to appeals under that subsection to them; and the regulations may, in particular, may make provision as to—

(a)the period within which and the manner in which appeals are to be brought; and

(b)the manner in which appeals are to be considered.

(10) In section 221 (general interpretation)—

(a)at the appropriate place, insert—

environmental permit” has the same meaning as in the Environmental Permitting Regulations;

Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010;; and

(b)omit the definition of “enforcement notice”.

(11) In Schedule 9, in paragraph 4(2)(c), for “a consent” substitute “ an environmental permit ”.

Marginal Citations

M931991 c. 57. Section 88(1) was amended by S.I. 2000/1973. Sections 91, 161 and 203 were amended by the Environment Act 1995 (c. 25) section 120 and Schedule 22. Section 161 was also amended by section 60 of that Act. Section 203 was also amended by the Water Act 2003 (c. 37), section 101 and Schedule 8. Sections 90A, 90B, 91(2G), 161A, 161B and 191B were inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22.

M94Section 90A was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 142.

M95Section 90B was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 142.

M98Section 191B was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 170.

M101Section 191B was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 170.

Water Consolidation (Consequential Provisions) Act 1991E+W+S

9.  In paragraph 30(1) of Schedule 1 to the Water Consolidation (Consequential Provisions) Act 1991 (offences under the Salmon and Freshwater Fisheries Act 1975) M102

(a)in paragraph (a), for “a consent under Chapter II of Part III of the Water Resources Act 1991 or” substitute “ an environmental permit under regulation 13 of the Environmental Permitting (England and Wales) Regulations 2010 or a consent ”; and

(b)in paragraph (b), after “such a” insert “ permit or ”.

Marginal Citations

Clean Air Act 1993E+W+S

10.—(1) Section 41A of the Clean Air Act 1993 (relation to the Pollution Prevention and Control Act 1999) M103 is amended as follows.

(2) In subsection (2)(c) M104, for “paragraph 4 of Schedule 2 to the 2007 Regulations” substitute “ paragraph 7 of Schedule 2 (exempt facilities: general) to the Environmental Permitting Regulations ”.

(3) In subsection (3), for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”.

(4) In subsection (4) M105

(a)in the definition of “activity”, for “within the meaning of the 2007 Regulations” substitute “ , or mining waste operation, within the meaning of the Environmental Permitting Regulations; ”; and

(b)for the definition of “the 2007 Regulations” substitute—

the Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010.

Marginal Citations

M1031993 c. 11. Section 41A was inserted by S.I. 2000/1973 and amended by S.I. 2007/3538 and 2009/1799.

M104Subsection 2(c) was inserted by S.I. 2007/3538, Schedule 21, paragraph 22(2).

M105Subsection (4) was inserted by S.I. 2007/3538, Schedule 21, paragraph 22(1) and (4) and amended by S.I. 2009/1799, regulation 28 and Schedule 2, paragraph 3.

Radioactive Substances Act 1993E+W+S

11.—(1) The 1993 Act M106 is amended as follows.

(2) Omit the following provisions—

(a)section 1 (meaning of “radioactive material”);

(b)section 2 (meaning of “radioactive waste”);

(c)section 3 (meaning of “mobile radioactive apparatus”);

(d)section 6 (prohibition of use of radioactive material without registration);

(e)section 7 (registration of users of radioactive material);

(f)section 8(1) to (3) and (8) (exemptions from registration under section 7);

(g)section 9 (prohibition of use of mobile radioactive apparatus without registration);

(h)section 10 (registration of mobile radioactive apparatus);

(i)section 11(3) (application of exemptions to Northern Ireland);

(j)section 12 (cancellation and variation of registration);

(k)section 13 (disposal of radioactive waste);

(l)section 14 (accumulation of radioactive waste);

(m)section 15(3) (application of exemptions to Northern Ireland);

(n)section 16 (grant of authorisations);

(o)section 16A (transfer of authorisations);

(p)section 17 (revocation and variation of authorisations);

(q)section 17A (review of authorisations);

(r)section 18 (functions of authorities in relation to authorisations under section 13);

(s)section 19 (duty to display documents);

(t)section 20 (retention and production of site or disposal records);

(u)section 21 (enforcement notices);

(v)section 22 (prohibition notices);

(w)section 23 (power of Secretary of State to give directions);

(x)section 24 (power of Secretary of State to require certain applications to be determined by him);

(y)section 25 (power of Secretary of State to restrict knowledge of applications);

(z)section 26 (registrations, authorisations and notices: appeals);

(aa)section 27 (procedure on appeals under section 26);

(bb)section 29 (provision of facilities for disposal or accumulation of radioactive waste);

(cc)section 30 (power of Secretary of State to dispose of radioactive waste);

(dd)section 30A (recovery and disposal of orphan sources);

(ee)section 32 (offences relating to registration or authorisation);

(ff)section 33 (offences relating to sections 19 and 20);

(gg)section 34 (disclosure of trade secrets);

(hh)section 34A (offences of making false or misleading statements or false entries);

(ii)section 36 (offences by body corporate);

(jj)section 37 (offence due to another's fault);

(kk)section 38 (restriction on prosecutions);

(ll)section 39 (public access to documents and records);

(mm)section 41 (service of documents);

(nn)section 42 (application to Crown);

(oo)section 44(2) (power to make Regulations in relation to registrations or authorisations: Great Britain);

(pp)section 45 (Regulations and orders: Northern Ireland);

(qq)section 46 (effect of Act on other rights and duties);

(rr)section 48 (index of defined expressions);

(ss)Schedule 1 (specified elements);

(tt)in Schedule 3, Parts II and III (application of section 40 to Scotland and Northern Ireland);

(uu)Schedule 6 (repeals and revocations).

(3) In section 8 (the title to which becomes “Exemptions from requirement for environmental permit”)—

(a)in subsections (4) and (5), for “registration under section 7” substitute “ the requirement for an environmental permit ”;

(b)in subsection (6), for “registration under section 7” substitute “ the requirement for an environmental permit ”.

(4) In section 11 (the title to which becomes “ Exemptions from requirement for environmental permit for mobile radioactive apparatus ”), in subsection (1), for “registration under section 10” substitute “ the requirement for an environmental permit ”.

(5) In section 15 (the title to which becomes “ Further exemptions from requirement for environmental permit ”)—

(a)in subsection (1), for “Sections 13(1) and (3) and 14(1)” substitute “ The requirement for an environmental permit ”;

(b)in subsection (1), for “operation of section 13(1) or section 14(1)” substitute “ requirement for an environmental permit ”;

(c)in subsection (2)—

(i)for “any of the provisions of section 13 or 14” substitute “ the requirement for an environmental permit ”;

(ii)for “such of those provisions as may be specified in an order under this subsection” substitute “ that requirement ”; and

(iii)for “so specified” substitute “ specified in an order under this subsection ”.

(6) For section 47 (general interpretation provisions) substitute—

47.    General interpretation provisions

(1) In this Act—

environmental permit” means a permit granted under regulation 13 of the Environmental Permitting Regulations;

the Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010;

local authority” has the same meaning as in the Environmental Permitting Regulations;

relevant water body” means a water undertaker, a sewerage undertaker or a local fisheries committee.

(2) The following have the same meaning as in Schedule 23 to the Environmental Permitting Regulations (radioactive substances activities)—

  • “article”;

  • “disposal”;

  • “mobile radioactive apparatus”;

  • “premises”;

  • “radioactive material”;

  • “radioactive waste”;

  • “substance”;

  • “undertaking”.

(7) Schedule 3 is amended as follows—

(a)in paragraph 9, omit “85, 86, 87(1), 88(2)”;

(b)after paragraph 10A M107, insert—

10B.  The Environmental Permitting Regulations, insofar as they relate to water discharge activities within the meaning of those Regulations.

Marginal Citations

M107Paragraph 10A was inserted by the Marine and Coastal Access Act 2009 (c.23), section 184 and Schedule 14, paragraph 18.

Goods Vehicles (Licensing of Operators) Act 1995E+W+S

12.  In the Goods Vehicles (Licensing of Operators) Act 1995 M108, in Schedule 2 (information about applicants and holders of licences), in paragraph 5(ia) M109 (offences), for “regulation 38(1)(a) or 38(1)(b) of the Environmental Permitting (England and Wales) Regulations 2007” substitute “ regulation 38(1) or (2) of the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

M1081995 c 23.

Environment Act 1995E+W+S

13.—(1) The 1995 Act M110 is amended as follows.

(2) In section 5(5) (pollution control functions), omit paragraph (h).

(3) In section 42 (approval of charging schemes), for subsection (3)(b) substitute—

(b)which the Food Standards Agency incurs in carrying out its functions in relation to environmental permits under the Environmental Permitting (England and Wales) Regulations 2010 concerning the disposal of radioactive waste within the meaning of those Regulations,.

(4) In section 56(1) (interpretation of Part 1), in the definition of “environmental licence”, omit paragraphs (e), (f) and (g).

(5) In section 108(15) (powers of enforcing authorities and persons authorised by them), in the definition of “pollution control functions”, omit paragraph (l).

(6) In section 114(2)(a) (power to delegate appeal functions)—

(a)in sub-paragraph (v), omit “91,”; and

(b)omit sub-paragraph (vi).

(7) In Schedule 20 (delegation of appellate functions), in paragraph 4(3) (holding of local enquiries), for paragraph (d) substitute—

(d)regulation 53 of the Environmental Permitting (England and Wales) Regulations 2010,.

Marginal Citations

M1101995 c 25. Section 56(1) was amended by the Pollution Prevention and Control Act 1999 (c. 24), section 6(1) and Schedule 2, and by S.I. 2000/1973, 2005/925, 2005/1728 and 2006/3289. Paragraph 4 of Schedule 20 was amended by S.I. 2000/1973.

Finance Act 1996E+W+S

14.  In section 43A(4)(h) of the Finance Act 1996 (contaminated land) M111, for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

M1111996 c. 8. Section 43A was inserted by S.I. 1996/1529, amended by S.I. 2000/1973 and 2005/3226 and substituted by S.I. 2007/3538, Schedule 21, paragraph 25. It has been prospectively repealed by S.I. 2008/2669, with the repeal to come into force on 1st April 2012.

Food Standards Act 1999E+W+S

15.  In the Food Standards Act 1999 M112, in Schedule 3 (the Agency's functions under other enactments), omit paragraph 21 and the cross-heading preceding it.

Marginal Citations

M1121999 c 28.

Finance Act 2000E+W+S

16.  In Schedule 6 to the Finance Act 2000 (climate change levy) M113, in paragraph 51(6), in the definition of “primary activity”, in the table (the cross-heading preceding entry 1 of which becomes “ Installations regulated under the Environmental Permitting (England and Wales) Regulations 2010 ”)—

(a)in entry 5(1), for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in entry 5(2)(a), for “regulation 3(2) of the Environmental Permitting (England and Wales) Regulations 2007” substitute “ paragraph 1 of Part 1 of Schedule 1 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

M1132000 c 17. Paragraph 51 of Schedule 6 was amended by S.I. 2001/1139 and 2006/1848.

Energy Act 2004E+W+S

17.—(1) The Energy Act 2004 M114 is amended as follows.

(2) In section 10 (powers of NDA for carrying out functions), in subsection (2)(b), for the words from “, registrations” to the end substitute “ and environmental permits (within the meaning of the Environmental Permitting (England and Wales) Regulations 2010) that relate to radioactive material or radioactive waste (within the meaning of those Regulations); ”.

(3) In section 37(7) (general interpretation of Chapter 1 of Part 1), in the definition of “radioactive waste”, for “the 1993 Act” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

(4) In section 196(1), omit the definition of “the 1993 Act”.

Marginal Citations

Income Tax (Trading and Other Income) Act 2005E+W+S

18.  In section 167 of the Income Tax (Trading and Other Income) Act 2005 (site preparation expenditure: supplementary) M115, in subsection (1), in the definition of “waste disposal licence”, omit paragraph (d).

Marginal Citations

Energy Act 2008E+W+S

19.  In section 59(2)(d) of the Energy Act 2008 (offence of further disclosure of information) M116, for “the Radioactive Substances Act 1993 (c 12)” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 in relation to radioactive material and radioactive waste within the meaning of those Regulations ”.

Marginal Citations

M1162008 c 32.

Corporation Tax Act 2009E+W+S

20.  In section 144(1) of the Corporation Tax Act 2009 (site preparation expenditure: supplementary) M117, omit paragraph (d).

Marginal Citations

M1172009 c 4.

PART 2 E+W+SSubordinate legislation

The Regulations as to Cremation (1930)E+W+S

1.  In the definitions in the Regulations as to Cremation (1930) M118

(a)in the definition of “Incinerated”, for “2007” substitute “ 2010 ”; and

(b)in the definition of “Permit”, for “2007” substitute “ 2010 ”.

Marginal Citations

M118S.I. 1930/1016; relevant amending instruments are S.I. 2006/92 and 2007/3538.

The Deposits in the Sea (Exemptions) Order 1985E+W+S

2.  In article 4(2) of the Deposits in the Sea (Exemptions) Order 1985 (exemptions involving waste) M119, for “2007” substitute  “ 2010 ”.

Marginal Citations

M119S.I. 1985/1699; relevant amending instruments are S.I. 1994/1056 and 2007/3538.

The Town and Country Planning (Use Classes) Order 1987E+W+S

3.  In article 3 of the Town and Country Planning (Use Classes) Order 1987 (use classes) M120, for paragraph (8) substitute—

(8) For the purpose of paragraph (7), “radioactive material” and “radioactive waste” have the same meaning as in the Environmental Permitting (England and Wales) Regulations 2010..

Marginal Citations

M120S.I. 1987/764, amended, in relation to Wales, by S.I. 2002/1875; there are other amending instruments but none is relevant.

The Civil Jurisdiction (Offshore Activities) Order 1987E+W+S

4.—(1) The Civil Jurisdiction (Offshore Activities) Order 1987 M121 is amended as follows.

(2) In article 4 (the title to which becomes “Application of the Wireless Telegraphy Act 1949, the Radioactive Substances Act 1993 and the Environmental Permitting (England and Wales) Regulations 2010”)—

(a)for “the Radioactive Substances Act 1960 and” substitute “ the Radioactive Substances Act 1993, ”; and

(b)after “therein)”, insert “ and the Environmental Permitting (England and Wales) Regulations 2010 (to the extent those Regulations apply to radioactive substances activities within the meaning of Schedule 23 to those Regulations), ”.

Marginal Citations

The Radioactive Substances (Hospitals) Exemption Order 1990E+W+S

5.  In article 2(1) of the Radioactive Substances (Hospitals) Exemption Order 1990 (interpretation) M122, in the definition of “site licence”, for “2007” substitute “ 2010 ”.

Marginal Citations

M122S.I. 1990/2512, amended by S.I. 2000/1973; there are other amending instruments but none is relevant.

The Controlled Waste (Registration of Carriers and Seizure of Vehicles) Regulations 1991E+W+S

6.—(1) The Controlled Waste (Registration of Carriers and Seizure of Vehicles) Regulations 1991 M123 are amended as follows.

(2) In regulation 6(1)(g) (registration as a carrier), for “2007” substitute “ 2010 ”.

(3) In the list in Schedule 1 (prescribed offences: relevant enactments), for “The Environmental Permitting (England and Wales) Regulations 2007” substitute “ The Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

M123S.I. 1991/1624, amended by S.I. 2000/1973; there are other amending instruments but none is relevant.

The Environmental Protection (Duty of Care) Regulations 1991E+W+S

7.—(1) The Environmental Protection (Duty of Care) Regulations 1991 M124 are amended as follows.

(2) In regulation 1(2) (interpretation), for the definition of “the 2007 Regulations” substitute—

the Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010,.

(3) For the table in regulation 2(2) (transfer notes) substitute—

TABLE

Category of personAdditional information

A waste collection authority for the purposes of Part 2 of the 1990 Act

The holder of an environmental permit in respect of a waste operation under the Environmental Permitting Regulations, excluding the holder of such a permit in respect of a Part A activity or Part B activity which is not a specified waste management activity within the meaning of paragraph 3 of Schedule 9 to those RegulationsIf the waste is to be kept, treated or disposed of by that person, the relevant permit number and the name of the permitting regulator.

A person carrying on an exempt waste operation under the Environmental Permitting Regulations

A person carrying on an operation to which section 33(1)(a) of the 1990 Act does not apply by virtue of regulation 68(2) of the Environmental Permitting Regulations

A person registered as a carrier of controlled waste under Regulations made under section 2 of the Control of Pollution (Amendment) Act 1989

The name of the waste regulation authority with whom the person is registered and the person's registration number

A person who is not required to be so registered by virtue of Regulations made under section 1(3) of that Act

Marginal Citations

M124S.I. 1991/2839; relevant amending instruments are S.I. 1996/972, 2000/1973, 2002/1559, 2005/894, 2005/895, 2005/1806 (W. 138), 2005/1820 (W. 148) and 2007/3538.

The Controlled Waste Regulations 1992E+W+S

8.—(1) The Controlled Waste Regulations 1992 M125 are amended as follows.

(2) In regulation 1(2) (interpretation), for “2007” substitute “ 2010 ”.

(3) In paragraph 18(2) of Schedule 3 (waste to be treated as industrial waste), for the definition of “tank washings” substitute—

tank washings” means waste residues from the tanks (other than the fuel tanks) or holds of a ship or waste arising from the cleaning of such tanks or holds;.

Marginal Citations

M125S.I. 1992/588; relevant amending instruments are S.I. 1994/1056, 1996/972, 2006/937 and 2007/3538.

The Waste Management Licensing Regulations 1994E+W+S

9.—(1) The Waste Management Licensing Regulations 1994 M126 are amended as follows.

(2) In regulation 20(2) (registration of brokers)—

(a)in sub-paragraph (a), for “the Environmental Permitting (England and Wales) Regulations 2007, a consent under Chapter 2 of Part 3 of the Water Resources Act 1991” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in sub-paragraph (b)(i), for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

(3) In paragraph 1 of Part 1 of Schedule 4 (waste framework directive etc), for the definition of “permit” substitute—

permit” means an environmental permit under the Environmental Permitting (England and Wales) Regulations 2010 or a licence under Part 2 of the Food and Environment Protection Act 1985;.

(4) In paragraph 1 of Part 1 of Schedule 5 (registration of brokers of controlled waste), in the definition of “relevant offence”, for “2007” substitute “ 2010 ”.

Marginal Citations

M126S.I. 1994/1056, amended by S.I. 1995/288, 1995/1950, 1996/593, 1996/634, 1996/972, 1996/1279, 1997/2203, 1998/606, 1998/2746, 2000/1973, 2002/674, 2002/1087 (W. 114), 2002/1559, 2002/2980, 2003/595, 2003/780 (W. 91), 2003/2635, 2004/70 (W. 6), 2004/3276, 2005/894, 2005/1728, 2005/1806 (W. 138), 2005/2900, 2006/937, 2006/3315, 2007/1156, 2007/2596 and 2007/3476.

The Urban Waste Water Treatment Regulations 1994E+W+S

10.—(1) The Urban Waste Water Treatment Regulations 1994 M127 are amended as follows.

(2) In regulation 2 (interpretation), at the appropriate place, insert—

environmental permit” has the same meaning as in the Environmental Permitting Regulations;

Environmental Permitting Regulations” means the Environmental Permitting Regulations (England and Wales) Regulations 2010;.

(3) In regulation 6 (discharges of treated urban waste water)—

(a)in paragraph (2), for “Chapter II of Part III of the Water Resources Act 1991 (pollution offences)” substitute “ the Environmental Permitting Regulations ”;

(b)in paragraph (2)(d)(ii), for “consents under the said Chapter II is controlled by such consents” substitute “ environmental permits under the Environmental Permitting Regulations is controlled by such permits ”;

(c)omit paragraph (4); and

(d)in paragraph (5), for “section 85 of that Act (offences of polluting controlled waters) insofar as that section relates” substitute “ the Environmental Permitting Regulations insofar as they relate ”.

(4) In regulation 8 (discharges of certain industrial waste water)—

(a)for paragraph (2) substitute—

(2) The Environment Agency must impose, in every environmental permit with respect to any discharge on or after 31st December 2000 to which this regulation applies, conditions which are appropriate to the nature of the industry concerned for the discharge of such waste water.;

(b)omit paragraph (3); and

(c)in paragraph (4), for “paragraphs (2) and (3)” substitute “ paragraph (2) ”.

(5) In regulation 10 (samples and records)—

(a)in paragraph (1)(a), for “a consent under Chapter II of Part III of the Water Resources Act 1991” substitute “ an environmental permit ”;

(b)for paragraph (1)(b) substitute—

(b)the operator” has the meaning given in the Environmental Permitting Regulations;

(c)in paragraph (3), for “Chapter II of Part III of the Water Resources Act 1991” substitute “ the Environmental Permitting Regulations ”;

(d)in paragraph (5), after “(evidence of samples and abstractions)” insert “ and the Environmental Permitting Regulations ”; and

(e)in paragraph (6), after “section 209” insert “ and the Environmental Permitting Regulations ”.

Marginal Citations

M127S.I. 1994/2841, amended by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 233(1).

The Landfill Tax Regulations 1996E+W+S

11.  In regulation 33(4) (bodies eligible for approval) of the Landfill Tax Regulations 1996 M128

(a)omit paragraph (f); and

(b)in paragraph (h), for “2007” substitute “ 2010 ”.

Marginal Citations

M128S.I. 1996/1527; relevant amending instruments are S.I. 2000/1973 and 2007/3538.

Control of Pollution (Applications, Appeals and Registers) Regulations 1996E+W+S

12.—(1) The Control of Pollution (Applications, Appeals and Registers) Regulations 1996 M129 are amended as follows.

(2) In regulation 1(2) (interpretation), omit the definition of “discharge consent”.

(3) Omit the following regulations—

(a)regulation 2 (advertisements);

(b)regulation 3 (timing of advertisements);

(c)regulation 4 (exemption from advertising requirements);

(d)regulation 5 (consultation);

(e)regulation 6 (transmitted applications);

(f)regulation 7 (discharge consents without applications).

(4) In regulation 8(1) (appeals), omit—

(a)“91 or”; and

(b)“appeals in respect of consents under Chapter II of Part III and”.

(5) In regulation 9 (time limit for bringing appeal), omit—

(a)paragraph (1)(a), (b) and (d); and

(b)paragraph (3)(a), (b) and (c).

(6) Omit regulation 10 (action on receipt of notice of appeal).

(7) In regulation 11 (written representations)—

(a)omit paragraph (1)(a);

(b)in paragraph (1)(b), omit “in all other cases”;

(c)omit paragraph (3); and

(d)in paragraph (4)(b), for “(1) to (3)” substitute “ 1) and (2) ”.

(8) In regulation 12 (hearings)—

(a)in paragraph (1)—

(i)omit “91 or”, and

(ii)omit “appeals in respect of consents under Chapter II of Part III and”;

(b)omit paragraphs (2) and (5);

(c)in paragraph (3), for “paragraphs (1) and (2)” substitute “ paragraph (1) ”; and

(d)in paragraph (6), for sub-paragraphs (a) to (c) substitute—

(a)the appellant; and

(b)the Agency..

(9) In regulation 13(2) (notification of determination)—

(a)in sub-paragraph (a), omit “and to any persons required under regulation 10(1)(b)(ii) to be notified of the appeal;” and

(b)in sub-paragraph (b), omit “to any other person who made representations to the Secretary of State under regulation 10 and”.

(10) Omit regulation 14 (consents for discharges by the Agency).

(11) In regulation 15 (pollution control registers)—

(a)omit paragraphs (b), (c), (f), (g), (h), (k) and (l); and

(b)in paragraph (i)—

(i)omit “notices of appeal under section 91 of that Act,”, and

(ii)omit “representations made under regulation 10,”.

(12) In regulation 16 (particulars on register)—

(a)in paragraph (1), omit “and paragraph (2) below”; and

(b)omit paragraphs (1)(a) and (b) and (2).

(13) In regulation 17(2) (period after which information may be removed from register), for  “, (e) or (l)” substitute “ or (e) ”.

(14) Omit Schedule 1 (discharge consents without applications) and Schedule 2 (discharge consents for the Agency).

Marginal Citations

The Town and Country Planning (Environmental Impact Assessment) (England and Wales) Regulations 1999E+W+S

13.  In Schedule 2 to the Town and Country Planning (Environmental Impact Assessment) (England and Wales) Regulations 1999 M130, in paragraph 3(g) of the table, in column 2, for the words from “an authorisation” to the end substitute “ the grant of an environmental permit under the Environmental Permitting (England and Wales) Regulations 2010 in relation to a radioactive substances activity described in paragraph 5(2)(b), (2)(c) or (4) of Part 2 of Schedule 23 to those Regulations, or the variation of such a permit ”.

Marginal Citations

The Water Protection Zone (River Dee Catchment) Designation Order 1999E+W+S

14.  In article 2 of the Water Protection Zone (River Dee Catchment) Designation Order 1999 (interpretation) M131, in paragraph (ii) of the definition of “controlled substance”, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Ionising Radiations Regulations 1999E+W+S

15.—(1) The Ionising Radiations Regulations 1999 M132 are amended as follows.

(2) In regulation 30 (notification of certain occurrences), for paragraph (2) substitute—

(2) Paragraph (1) shall not apply where such release—

(a)was in accordance with an environmental permit under the Environmental Permitting (England and Wales) Regulations 2010 in respect of mobile radioactive apparatus within the meaning of those Regulations;

(b)was in a manner specified in such an environmental permit in respect of radioactive waste within the meaning of those Regulations; or

(c)did not, under regulation 12 of those Regulations, require an environmental permit..

(3) In Schedule 1 (work not required to be notified under regulation 6)—

(a)in paragraph 1, for “the appropriate Agency” wherever it appears substitute “ the Environment Agency ”; and

(b)omit paragraph 2.

Marginal Citations

The Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations 2000E+W+S

16.  In Schedule 3 to the Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations 2000 (accuracy classes for filling instruments) M133, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Non-automatic Weighing Instruments Regulations 2000E+W+S

17.—(1) The Non-automatic Weighing Instruments Regulations 2000 M134 are amended as follows.

(2) In regulation 28(7) (restrictions on use of instruments for trade), for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Control of Pollution (Oil Storage) (England) Regulations 2001E+W+S

18.  In regulation 2(2)(a) of the Control of Pollution (Oil Storage)(England) Regulations 2001 (application of Regulations) M135, for “2007” substitute “ 2010 ”.

Marginal Citations

M135S.I. 2001/2954, amended by S.I. 2007/3538; there are other amending instruments but none is relevant.

The Weighing Equipment (Automatic Rail-weighbridges) Regulations 2003E+W+S

19.  In Schedule 3 to the Weighing Equipment (Automatic Rail-weighbridges) Regulations 2003 (requirements relating to use) M136, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The End-of-Life Vehicles Regulations 2003E+W+S

20.  In regulation 2 of the End-of-Life Vehicles Regulations 2003 (interpretation) M137, in the definition of “authorised treatment facility”, for “2007” substitute “ 2010 ”.

Marginal Citations

M137S.I. 2003/2635, amended by S.I. 2007/3538; there are other amending instruments but none is relevant.

The Weighing Equipment (Automatic Catchweighing Instruments) Regulations 2003E+W+S

21.—(1) The Weighing Equipment (Automatic Catchweighing Instruments) Regulations 2003 M138 are amended as follows.

(2) In Schedule 3 (requirements in respect of manner of use), under “Definition of waste”, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Water Environment (Water Framework Directive) (England and Wales) Regulations 2003E+W+S

22.  Schedule 2 to the Water Environment (Water Framework Directive) (England and Wales) Regulations 2003 (enactments to which duties in regulation 3 apply) M139 is amended as follows—

(a)for paragraph 4 substitute—

4.  Parts 2 and 2A of the Environmental Protection Act 1990 (waste on land and contaminated land).;

(b)omit paragraph 22;

(c)for paragraph 28 substitute—

28.  The Environmental Permitting (England and Wales) Regulations 2010..

Marginal Citations

M139S.I. 2003/3242, amended by S.I. 2007/3538; there are other amending instruments but none is relevant.

The Hazardous Waste (England and Wales) Regulations 2005E+W+S

23.—(1) The Hazardous Waste (England and Wales) Regulations 2005 M140 are amended as follows.

(2) In regulation 5(1) (general interpretation)—

(a)for the definition of “the 2007 Regulations”, substitute—

the Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010;;

(b)in the definition of “environmental permit”, for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”;

(c)for the definition of “registered exemption” substitute—

registered exemption” means an exempt waste operation within the meaning of the Environmental Permitting Regulations;;

(d)for the definition of “waste permit” substitute—

waste permit” means a licence under Part 2 of the Food and Environment Protection Act 1985 or an environmental permit; and

(e)at the appropriate place, insert—

radioactive substances activity” has the meaning given in Schedule 23 to the Environmental Permitting Regulations;

radioactive waste” has the meaning given in Schedule 23 to the Environmental Permitting Regulations;.

(3) For paragraph (1) of regulation 15 (radioactive waste) substitute—

(1) This regulation applies to radioactive waste where—

(a)a radioactive substances activity in relation to that radioactive waste does not require an environmental permit by virtue of section 15 of the Radioactive Substances Act 1993; and

(b)that radioactive waste has one or more hazardous properties arising other than from its radioactive nature..

(4) In regulation 26(4)(d) (common provisions on notifications), for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”.

(5) In regulation 42(8) (duty of consignee not accepting delivery), for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting Regulations ”.

Marginal Citations

M140S.I. 2005/894, amended by S.I. 2009/507; there are other amending instruments but none is relevant.

The Greenhouse Gas Emissions Trading Scheme Regulations 2005E+W+S

24.  In regulation 8(3)(b)(i) of the Greenhouse Gas Emissions Trading Scheme Regulations 2005 (applications for greenhouse gas emissions permits) M141, for “2007” substitute “ 2010 ”.

Marginal Citations

The Hazardous Waste (Wales) Regulations 2005E+W+S

25.—(1) The Hazardous Waste (Wales) Regulations 2005 M142 are amended as follows.

(2) In regulation 5(1)(general interpretation)—

(a)for the definition of “the 2007 Regulations” substitute—

the Environmental Permitting Regulations” means the Environmental Permitting (England and Wales) Regulations 2010;;

(b)in the definition of “environmental permit”, for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”;

(c)for the definition of “registered exemption” substitute—

registered exemption” (“esemptiad cofrestredig”) means an exempt waste operation within the meaning of the Environmental Permitting Regulations;;

(d)for the definition of “waste permit” substitute—

waste permit” (“trwydded gwastraff”) means a licence under Part 2 of the Food and Environment Protection Act 1985 or an environmental permit; and

(e)at the appropriate place, insert—

radioactive substances activity” has the meaning given in Schedule 23 to the Environmental Permitting Regulations;

radioactive waste” has the meaning given in Schedule 23 to the Environmental Permitting Regulations;.

(3) For paragraph (1) of regulation 15 (radioactive waste) substitute—

(1) This regulation applies to radioactive waste where—

(a)a radioactive substances activity in relation to that radioactive waste does not require an environmental permit by virtue of section 15 of the Radioactive Substances Act 1993; and

(b)that radioactive waste has one or more hazardous properties arising other than from its radioactive nature..

(4) In regulation 26(4)(d) (common provisions on notifications), for “the 2007 Regulations” substitute “ the Environmental Permitting Regulations ”.

(5) In regulation 42(8) (duty of consignee not accepting delivery), for “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting Regulations ”.

Marginal Citations

M142S.I. 2005/1806 (W. 138), amended by S.I. 2007/3538.

The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2005E+W+S

26.  In regulation 3(4) of the Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2005 (scope) M143, in paragraph (i) of the definition of “SED Activity”, for “2007” substitute “ 2010 ”.

Marginal Citations

M143S.I. 2005/2773, amended by S.I. 2007/3538; there are other amending instruments but none is relevant.

The Railways Infrastructure (Access and Management) Regulations 2005E+W+S

27.  In regulation 3(1) of the Railways Infrastructure (Access and Management) Regulations 2005 (interpretation) M144, in the definition of “nuclear site”, for “Radioactive Substances Act 1993” substitute “ Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Waste Management (England and Wales) Regulations 2006E+W+S

28.  In the Waste Management (England and Wales) Regulations 2006 M145, omit the following—

(a)regulation 6 (amendment of Waste Management Licensing Regulations 1994);

(b)regulation 7 (amendment of Waste Management Regulations 1996);

(c)regulation 8 (amendment of Groundwater Regulations 1998);

(d)regulation 9 (amendment of Landfill (England and Wales) Regulations 2002).

Marginal Citations

M145S.I 2006/937.

The Measuring Instruments (Automatic Rail-weighbridges) Regulations 2006E+W+S

29.  In regulation 16(3) of the Measuring Instruments (Automatic Rail-weighbridges) Regulations 2006 (accuracy class) M146, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Measuring Instruments (Automatic Catchweighers) Regulations 2006E+W+S

30.  In regulation 18(5) of the Measuring Instruments (Automatic Catchweighers) Regulations 2006 (use for trade) M147, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Measuring Instruments (Automatic Gravimetric Filling Instruments) Regulations 2006E+W+S

31.  In Part 1 of Schedule 5 to the Measuring Instruments (Automatic Gravimetric Filling Instruments) Regulations 2006 (requirements for use for trade: accuracy classes) M148, for “section 2 of the Radioactive Substances Act 1993” substitute “ Schedule 23 to the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Contaminated Land (England) Regulations 2006E+W+S

32.—(1) The Contaminated Land (England) Regulations 2006 M149 are amended as follows.

(2) In regulation 2(4) (land required to be designated as a special site), for “2007” substitute  “ 2010 ”.

(3) In paragraph 16 of Schedule 3 (particulars to be contained in a register)—

(a)for “a consent given under Chapter 2 of Part 3 of the Water Resources Act 1991 (pollution offences)” substitute “ an environmental permit granted under regulation 13 of the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in sub-paragraph (a), for “consent” substitute “ environmental permit ”.

Marginal Citations

The Contaminated Land (Wales) Regulations 2006E+W+S

33.—(1) The Contaminated Land (Wales) Regulations 2006 M150 are amended as follows.

(2) In regulation 2(4) (land required to be designated as a special site), for “2007” substitute  “ 2010 ”.

(3) In paragraph 16 of Schedule 3 (particulars to be contained in a register)—

(a)for “a consent given under Chapter 2 of Part 3 of the Water Resources Act 1991 (pollution offences)” substitute “ an environmental permit granted under regulation 13 of the Environmental Permitting (England and Wales) Regulations 2010 ”; and

(b)in sub-paragraph (a), for “consent” substitute “ environmental permit ”.

Marginal Citations

M150S.I. 2006/2989 (W. 278), amended by S.I. 2007/3538.

The Waste Electrical and Electronic Equipment Regulations 2006E+W+S

34.  In regulation 2(1) of the Waste Electrical and Electronic Equipment Regulations 2006 (interpretation) M151, in the definition of “relevant authorisation”, for each reference to “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Producer Responsibility Obligations (Packaging Waste) Regulations 2007E+W+S

35.  In regulation 2(2) of the Producer Responsibility Obligations (Packaging Waste) Regulations 2007 (interpretation) M152, in the definition of “relevant authorisation”, for each reference to “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

Marginal Citations

The Transfrontier Shipment of Waste Regulations 2007E+W+S

36.  For regulation 16 of the Transfrontier Shipment of Waste Regulations 2007 M153, substitute—

Environmental Permitting (England and Wales) Regulations 2010

16.  The definition of “waste management plan” in paragraph 1 of Part 1 of Schedule 25 to the Environmental Permitting (England and Wales) Regulations 2010 has effect as if the reference in that paragraph to a plan made under the plan-making provisions includes a reference to a waste management plan made under this Part..

Marginal Citations

The Large Combustion Plants (National Emission Reduction Plan) Regulations 2007E+W+S

37.—(1) The Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M154 are amended as follows.

(2) In regulation 3(1)(a) (meaning of “participating plant”), for “2007” substitute “ 2010 ”.

(3) In paragraph 1 of Schedule 1 (the register), in paragraph (a) of the definition of “cumulative in-year mass emissions”, for “2007” substitute “ 2010 ”.

Marginal Citations

The Persistent Organic Pollutants Regulations 2007E+W+S

38.—(1) Regulation 4 of the Persistent Organic Pollutants Regulations 2007 M155 is amended as follows—

(a)regulation 4 is renumbered as paragraph (1) of that regulation;

(b)in paragraph (1)(b) (as re-numbered), for “the Pollution Prevention and Control (England and Wales) Regulations 2000” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”;

(c)after paragraph (1)(b) (as re-numbered), insert—

(2) In paragraph (1)(b), “permit” in relation to the Environmental Permitting (England and Wales) Regulations 2010 means environmental permit within the meaning of those Regulations..

Marginal Citations

The Environmental Damage (England) Regulations 2009E+W+S

39.—(1) The Environmental Damage (England) Regulations 2009 M156 are amended as follows.

(2) In regulation 10 (the title to which becomes “Enforcing authorities under the Environmental Permitting (England and Wales) Regulations 2010”), in paragraph (1), for “2007” substitute “ 2010 ”.

(3) In regulation 11 (enforcing authorities in other cases), for “2007” substitute “ 2010 ”.

(4) In paragraph 1 of Schedule 3 (permits etc)—

(a)in sub-paragraph (a), for “2007” substitute “ 2010 ”;

(b)in sub-paragraph (c), omit “a water discharge consent,”; and

(c)omit sub-paragraph (d).

Marginal Citations

The Waste Batteries and Accumulators Regulations 2009E+W+S

40.—(1) The Waste Batteries and Accumulators Regulations 2009 M157 are amended as follows.

(2) In paragraph 12 of Schedule 4 (approval of battery treatment operators and exporters), for each reference to “the Environmental Permitting (England and Wales) Regulations 2007” substitute “ the Environmental Permitting (England and Wales) Regulations 2010 ”.

(3) In Schedule 8 (amendments to other enactments), omit paragraph 2(3) and (6).

Marginal Citations

Regulation 108

SCHEDULE 27E+W+SRevocations

Instruments revokedReferencesExtent of revocation
The Control of Pollution (Radioactive Waste) Regulations 1989S.I. 1989/1158The whole Regulations.
The Radioactive Substances Appeals Regulations 1990S.I. 1990/2504The whole Regulations.
The Control of Pollution (Channel Tunnel Rail Link) Regulations 1998S.I. 1998/1649The whole Regulations.
The High-Activity Sealed Radioactive Sources and Orphan Sources Regulations 2005S.I. 2005/2686The whole Regulations.
The Environmental Permitting (England and Wales) Regulations 2007S.I. 2007/3538The whole Regulations, except—

(a)regulations 1, 67, 72(3), (4), (5), (8), (9) and (11) and 73 and Schedule 21; and

(b)for the purpose of any of those provisions, any definition in Part 1.

The Environmental Permitting (England and Wales) (Amendment) Regulations 2009S.I. 2009/1799The whole Regulations, except regulations 1 and 28(1) and Schedule 2.
The Environmental Permitting (England and Wales) (Amendment) (No 2) Regulations 2009S.I. 2009/3381The whole Regulations, except regulations 1 and 13 to 15.
The Groundwater (England and Wales) Regulations 2009S.I. 2009/2902The whole Regulations.

Regulation 109

SCHEDULE 28E+W+SRepeals

ChapterShort titleExtent of repeal
1990 c. 43Environmental Protection Act 1990In section 156(2), “; and the provisions of the Radioactive Substances Act 1993”.
1991 c. 46Atomic Weapons Establishment Act 1991In the Schedule, paragraph 10A M158 and the cross-heading preceding it.
1991 c. 57Water Resources Act 1991

Sections 85 to 91.

Section 96(3).

Section 99.

Section 103.

Section 161ZC(5) M159.

Section 161AB(4) M160.

Section 190(1)(b), (c), (g), (h), (j), (k), (m), (n) and (5).

Section 191B(2)(a), (2)(b) and (12) M161.

In section 221, the definition of “enforcement notice”.

Schedule 10.

Schedule 13.

1992 c. 43.Competition and Service (Utilities) Act 1992Section 46.
1993 c. 12Radioactive Substances Act 1993

Sections 1 to 7.

Section 8(1) to (3) and (8).

Sections 9 and 10.

Section 11(3).

Sections 12 to 14.

Section 15(3).

Sections 16 to 39.

Section 41.

Section 42.

Section 44(2).

Sections 45 and 46.

Section 48.

Schedule 1.

In Schedule 3—

(a)in paragraph 9, “85, 86, 87(1), 88(2),”;
(b)Parts II and III.
Schedule 6.
1995 c. 25Environment Act 1995

In section 5(5), paragraph (h).

In section 56(1), in the definition of “environmental licence”, paragraphs (e), (f) and (g).

Section 60(1) and (2).

In section 108(15), in the definition of “pollution control functions”, paragraph (l).

In section 114(2)(a)—

(a) in sub-paragraph (v), “91,”;

(b) sub-paragraph (vi).

In Schedule 22, paragraphs 142, 143, 177(6), 182, 183, 186, 200 to 223, and 225 to 229.

1999 c. 28Food Standards Act 1999

In Schedule 3, paragraph 21 and the cross-heading preceding it.

In Schedule 5, paragraph 43.

2004 c. 20Energy Act 2004

Sections 72 to 75.

In section 196(1), the definition of “the 1993 Act”.

Schedule 15.

2005 c. 5Income Tax (Trading and Other Income) Act 2005In section 167(1), in the definition of “waste disposal licence”, paragraph (d).
2008 c. 27Climate Change Act 2008Section 88(2).
2009 c. 4Corporation Tax Act 2009Section 144(1)(d).

Marginal Citations

M158Paragraph 10A was inserted by the Radioactive Substances Act 1993 (c. 12), section 49(1) and Schedule 4, paragraph 10.

M161Section 191B was inserted by the Environment Act 1995 (c. 25), section 120 and Schedule 22, paragraph 170.

Back to top

Options/Help

Print Options

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources