- Latest available (Revised)
- Point in Time (05/10/2015)
- Original (As made)
There are currently no known outstanding effects for the The Renewable Heat Incentive Scheme Regulations 2011 (revoked).
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
PART 2 Eligibility and matters relating to eligibility
CHAPTER 2 Eligibility criteria for technologies
6.Eligible installations generating heat from solid biomass contained in municipal waste
7.Eligible installations generating heat using solar collectors
8.Eligible installations generating heat using ground source heat pumps
8A.Eligible installations generating heat using air source heat pumps
9A.Eligible installations which are new solid biomass CHP systems
10.Eligible installations generating heat using geothermal sources
13.Certification for installation of Microgeneration heating equipment
CHAPTER 3 Eligibility criteria in relation to metering and steam measuring
17A.Metering in respect of new applications for accreditation
17B.Metering in respect of new applications for accreditation in respect of ground source or air source heat pumps
19.Metering of CHP systems generating electricity only before 15th July 2009
20.Matters relating to all heat meters and steam measuring equipment
21.Additional metering requirements for plants generating heat from biogas
PART 4 Ongoing obligations for participants
CHAPTER 1 Ongoing obligations relating to the use of solid biomass to generate heat
PART 5 Periodic support payments
37A.Calculation of initial tariffs on or after the relevant date
37F.Determination of increase in expenditure forecasts for 1st September 2014 expenditure forecast statement
38.Periodic support payments for accredited RHI installations in simple systems
39.Periodic support payments accredited RHI installations for complex systems
39A.Periodic support payments for new accredited RHI installations
39B.Periodic support payments for CHP systems using biomass or biogas in combination with other sources of energy
39C. CHP systems accredited in relation to the Renewables Obligation
40.Fossil fuel contamination of solid biomass and fossil fuel used for permitted ancillary purposes
41.Fossil fuel contamination adjustment to periodic support payments for producers and combusters of biogas produced from gasification and pyrolysis
PART 11 Administrative Functions of the Authority and notices
SCHEDULES
Content of RHI emission certificates
1.The name and address of the testing laboratory by which...
4.Where the testing laboratory is accredited to BS EN ISO...
5.The name, model, manufacturer and installation capacity of the plant...
8.The requirements of this paragraph are that testing is carried...
11.Confirmation that when tested as specified in paragraphs 7 to...
14.The moisture content of the fuel used during testing and...
15.A statement indicating whether or not the plant tested was...
Provision of information in relation to the use of biomass in certain circumstances
1.Information to be provided to the Authority where biomass is used for combustion or production of biomethane
2.The information is information identifying to the best of the...
3.The information specified in paragraph 2 must be collated by...
4.The information specified in paragraph 2 must be provided for...
5.For the purpose of this Schedule— ... “environmental quality assurance...
4.Solid biomass which is wood or wholly derived from wood...
5.The requirements in this paragraph are that the solid biomass—...
6.Material added to solid biomass for an exempt purpose shall...
7.A management plan meets the requirements specified in this paragraph...
9.In this Part, “Forest Europe Sustainable Forest Management Criteria” means...
PART 3 Land criteria for other solid biomass including energy crops
10.Solid biomass which is not wood or derived wholly from...
11.Material added to solid biomass for an exempt purpose shall...
12.Solid biomass is obtained from a protected source if it...
13.This paragraph applies if the production of the solid biomass...
14.This paragraph applies if the cultivation and harvesting of the...
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: