- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Materials and Articles in Contact with Food (England) Regulations 2012, THE SCHEDULE.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 14(1)
Specified provision | Subject matter |
---|---|
Article 4(e), as read with Articles 17 and 18 | Prohibition on placing on the market plastic materials or articles if they do not meet specified compositional and declaration requirements |
Article 5(1) and Annex I, as read with Article 6 | Requirement, subject to certain derogations, to use only authorised substances in the manufacture of plastic layers in plastic materials and articles |
Article 8, first sentence | General quality and purity standards that must be observed for substances used in the manufacture of plastic layers in plastic materials and articles |
Article 9 as read with Annex I | Particular restrictions and specifications for substances used in the manufacture of plastic layers in plastic materials and articles |
Article 10 as read with Annex II | General restrictions on plastic materials and articles |
[F1Article 11(1) and Annex 1, as read with Article 11(3) and (4)] | Specific limits on the degree to which constituents of plastic materials and articles are permitted to migrate into foods |
Article 12 | Overall limits on the permitted level of migration of the constituents of plastic materials and articles into food simulants |
Article 13(1),(3),(4) and (5) and Annex I as read with Article 13(2) | Particular restrictions and specifications for the composition of each plastic layer in plastic multi-layer materials and articles |
Article 14(1) and (5) and Annex 1, as read with Article 14(2),(3) and (4) | Particular restrictions and specifications for the composition of each plastic layer in multi-material multi-layer materials and articles |
F2. . . | F2. . . |
Textual Amendments
F1Words in Sch. substituted (25.12.2020) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments) (England) Regulations 2020 (S.I. 2020/1410), regs. 1(2), 4(16)(a)
F2Words in Sch. omitted (25.12.2020) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments) (England) Regulations 2020 (S.I. 2020/1410), regs. 1(2), 4(16)(b)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: