Search Legislation

The Bathing Water Regulations 2013

Changes over time for: The Bathing Water Regulations 2013 (Schedules only)

 Help about opening options

Status:

Point in time view as at 31/12/2020.

Changes to legislation:

There are currently no known outstanding effects for the The Bathing Water Regulations 2013. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulation 2

SCHEDULE 1U.K.DEFINITIONS FROM THE WATER FRAMEWORK DIRECTIVE

  • Coastal water” means surface water on the landward side of a line, every point of which is at a distance of one nautical mile on the seaward side from the nearest point of the baseline from which the breadth of territorial waters is measured M1, extending where appropriate up to the outer limit of transitional waters.

  • Groundwater” means all water which is below the surface of the ground in the saturation zone and in direct contact with the ground or subsoil.

  • Inland water” means all standing or flowing water on the surface of the land, and all groundwater on the landward side of the baseline from which the breadth of territorial waters is measured.

  • Lake” means a body of standing inland surface water.

  • River” means a body of inland water flowing for the most part on the surface of the land but which may flow underground for part of its course.

  • Surface water” means inland waters, except groundwater; transitional waters and coastal waters, except in respect of chemical status for which it shall also include territorial waters.

  • “Transitional waters” are bodies of surface water in the vicinity of river mouths which are partly saline in character as a result of their proximity to coastal waters but which are substantially influenced by freshwater flows.

Marginal Citations

M1The relevant baseline, for the purposes of this definition and the definition of “inland water”, is that from which the breadth of the territorial sea is measured and is established by section 1 of the Territorial Sea Act 1987 (c.49) and the Territorial Waters Order in Council 1964 (1965 III, p.6452A).

Regulation 3

F1SCHEDULE 2U.K.SURFACE WATERS IDENTIFIED IN ENGLAND AND WALES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Regulation 7

SCHEDULE 3U.K.BATHING WATER PROFILES

ContentsU.K.

1.—(1) Every bathing water profile must—

(a)contain a description of the physical, geographical and hydrological characteristics of—

(i)the bathing water; and

(ii)any other surface water in the catchment area of the bathing water where the surface water could be a source of pollution for the bathing water;

(b)identify and assess the causes of pollution that might affect bathing water quality and pose a risk to bathers' health;

(c)assess the potential for cyanobacterial proliferation;

(d)assess the potential for the proliferation of macro-algae or phytoplankton; and

(e)identify the location of the monitoring point.

(2) The information in sub-paragraph (1)(a) and (b) must be detailed on a map whenever practicable.

ReviewU.K.

2.—(1) Where a bathing water is classified as “poor”, “sufficient” or “good” under regulation 11, the appropriate agency must review, and if necessary update, the bathing water profile, taking into account the nature and severity of the pollution which affects the bathing water and at the following minimum frequency—

(a)if classified as “poor”, every two years;

(b)if classified as “sufficient”, every three years; and

(c)if classified as “good”, every four years.

(2) Where there are significant construction works or infrastructure changes in or around a bathing water, the appropriate agency must review the bathing water profile before the start of the next bathing season.

Regulation 8

SCHEDULE 4U.K.MONITORING ETC

PART 1U.K.INTESTINAL ENTEROCOCCI AND ESCHERICHIA COLI

Location of monitoring pointU.K.

1.  The appropriate agency must—

(a)at every bathing water, locate the monitoring point where most bathers are expected; and

(b)subject to paragraph 7, where possible, take samples 30 centimetres below the water's surface and in water at least one metre deep.

Monitoring calendarU.K.

2.—(1) The appropriate agency must—

(a)establish a monitoring calendar for every bathing water before the start of every bathing season; and

(b)take samples at every bathing water no later than four days after the date specified in the monitoring calendar.

(2) In relation to any abnormal situation, the appropriate agency—

(a)may suspend the monitoring calendar for the duration of the situation; and

(b)as soon as possible after the end of the situation, must take sufficient additional samples to replace those missing due to the suspension and to ensure that it has the minimum number required for the bathing water for the bathing season.

Frequency of monitoringU.K.

3.  The appropriate agency must—

(a)take and analyse the first sample for every bathing season shortly before the start of that season; and

(b)take and analyse samples at intervals not exceeding one month, from every bathing water throughout the bathing water season.

Sampling equipmentU.K.

4.—(1) Subject to paragraph 7, the appropriate agency must only use sampling bottles which—

(a)have been—

(i)sterilised in an autoclave for at least 15 minutes at 121 degrees Celsius;

(ii)dry sterilised at no lower than 160 degrees Celsius and no higher than 170 degrees Celsius for at least one hour; or

(iii)irradiated by their manufacturer and not used previously;

(b)are of a size which allows sufficient water to be taken and analysed for the presence of intestinal enterococci and Escherichia coli; and

(c)are made of transparent and colourless material.

(2) The appropriate agency must—

(a)use aseptic techniques to maintain the sterility of the sample bottles; and

(b)clearly identify every sample taken by marking in indelible ink the sample bottle and associated paperwork.

Storage and transport of samples before analysisU.K.

5.—(1) Subject to paragraph 7, the appropriate agency must—

(a)at all times, protect every sample taken from exposure to light, and in particular, direct sunlight; and

(b)conserve every sample at a temperature of around 4 degrees Celsius between sampling and laboratory analysis.

(2) In relation to any sample, if the interval between sampling and laboratory analysis is likely to exceed four hours, the appropriate agency must conserve the sample in a refrigerator.

(3) The appropriate agency must ensure that the time between sampling and laboratory analysis does not exceed 24 hours and must use its best endeavours to keep this time as short as possible.

Reference methods of analysisU.K.

6.—(1) Subject to paragraph 7, the appropriate agency must use the following reference methods of analysis—

(a)for intestinal enterococci, one of the following standards of the International Organization for Standardization—

(i)ISO 7899-1:1998 (water quality, detection and enumeration of intestinal enterococci, Part 1, miniaturized method, most probable number, for surface and waste water) as amended by Cor 1:2000, or

(ii)ISO 7899-2:2000 (water quality, detection and enumeration of intestinal enterococci, Part 2, membrane filtration method); and

(b)for Escherichia coli, one of the following standards of the International Organization for Standardization—

(i)ISO 9308-1:2000 (water quality, detection and enumeration of Escherichia coli and coliform bacteria, Part 1, membrane filtration method) as amended by Cor 1:2007, or

(ii)ISO 9308-3:1998 (water quality, detection and enumeration of Escherichia coli and coliform bacteria, Part 3, miniaturized method, most probable number, for the detection and enumeration of E. coli in surface and waste water) as amended by Cor 1:2000.

General provisions in relation to rules or reference methods of analysisU.K.

7.  The appropriate agency—

(a)must have regard to the guidelines on the handling of samples for microbiological analyses given in Annex V to the Bathing Water Directive; and

(b)may use such rules or reference methods of analysis as it considers are substantively equivalent to those specified in this Schedule, where the appropriate agency has notified the appropriate Minister giving details of such rules and methods and their equivalence.

PART 2U.K.CYNOBACTERIA

8.  Where any bathing water profile indicates a potential for cyanobacterial proliferation, the appropriate agency must undertake appropriate monitoring at the bathing water at the frequency necessary to allow adequate management measures to be put in place in accordance with regulation 12.U.K.

PART 3U.K.MACRO-ALGAE AND MARINE PHYTOPLANKTON

9.  Where any bathing water profile indicates a tendency for proliferation of macro-algae or marine phytoplankton, the appropriate agency must undertake investigations at the bathing water to allow adequate management measures to be put in place in accordance with regulation 12.U.K.

PART 4U.K.WASTE

10.  The appropriate agency must undertake visual inspections at every bathing water at the frequency necessary to allow adequate management measures to be put in place in accordance with regulation 12.U.K.

Regulation 11

SCHEDULE 5U.K.CLASSIFICATION

StandardsU.K.

1.  The appropriate agency must use the following standards for classification—

Standards for inland waters

1 Colony forming units per 100 millilitres (“cfu/100 ml”).

2 Based upon a 95-percentile evaluation-see paragraph 2.

3 Based upon a 90-percentile evaluation-see paragraph 2.

Parameter “Excellent” “Good” “Sufficient”
Intestinal enterococci1200240023303
Escherichia coli(1)50021,00029003

Standards for coastal and transitional waters

1 Colony forming units per 100 millilitres (“cfu/100 ml”).

2 Based upon a 95-percentile evaluation-see paragraph 2.

3 Based upon a 90-percentile evaluation-see paragraph 2.

Parameter “Excellent” “Good” “Sufficient”
Intestinal enterococci1100220021853
Escherichia coli1250250025003

MethodologyU.K.

2.—(1) In this Schedule, “percentile value” is based on a percentile evaluation of the log10 normal probability density function of microbiological data used for the assessment under regulation 10.

(2) The appropriate agency must derive a percentile value as follows—

(a)take the log10 value of all bacterial concentrations in the data sequence to be evaluated or, if a zero value is obtained, take the log10 value of the minimum detection limit of the analytical method used;

(b)calculate the arithmetic mean (“�”) of the log10 values taken under paragraph (a);

(c)calculate the standard deviation (“�?”) of the log10 values taken under paragraph (a);

(d)derive the upper 90-percentile point of the data probability density function from the following equation: upper 90-percentile = antilog (� + 1.282 �?); and

(e)derive the upper 95-percentile point of the data probability density function from the following equation: upper 95-percentile = antilog (� + 1.65 �?).

ClassificationU.K.

3.—(1) At the end of every bathing season, the appropriate agency must classify a bathing water as “poor” if, in the set of bathing water quality data used, the percentile values for microbiological concentrations are higher than the “sufficient” standards set out in paragraph 1.

(2) At the end of every bathing season, the appropriate agency must classify a bathing water as “sufficient” if—

(a)in the set of bathing water quality data, the percentile values for microbiological concentrations are equal to or lower than the “sufficient” standards set out in paragraph 1; and

(b)the bathing water is not classifiable as “good” or “excellent”.

(3) At the end of every bathing season, the appropriate agency must classify a bathing water as “good” if—

(a)in the set of bathing water quality data, the percentile values for microbiological concentrations are equal to or lower than the “good” standards set out in paragraph 1; and

(b)the bathing water is not classifiable as “excellent”.

(4) At the end of every bathing season, the appropriate agency must classify a bathing water as “excellent” if, in the set of bathing water quality data used, the percentile values for microbiological concentrations are equal to or lower than the “excellent” standards set out in paragraph 1.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources