- Latest available (Revised)
- Point in Time (01/10/2015)
- Original (As made)
Version Superseded: 01/10/2020
Point in time view as at 01/10/2015.
There are currently no known outstanding effects for the The Packaging (Essential Requirements) Regulations 2015.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 2(1)
1.—(1) Packaging must be so manufactured that the packaging volume and weight is limited to the minimum adequate amount to maintain the necessary level of safety, hygiene and acceptance for the packed product and for the consumer.
(2) Packaging must be designed, produced and commercialised in such a way as to permit its reuse or recovery, including recycling, and to minimise its impact on the environment when packaging waste or residues from packaging waste management operations are disposed of.
(3) Packaging must be so manufactured that the presence of noxious and other hazardous substances and materials as constituents of the packaging material or of any of the packaging components is minimised with regard to their presence in emissions, ash or leachate when packaging or residues from management operations or packaging waste are incinerated or landfilled.
2.—(1) The following requirements must be simultaneously satisfied—
(a)the physical properties and characteristics of the packaging must enable a number of trips or rotations in normally predictable conditions of use,
(b)it must be possible to process the used packaging in order to meet health and safety requirements for the workforce,
(c)the requirements specific to recoverable packaging must be fulfilled when the packaging is no longer reused and thus becomes waste.
3.—(1) Packaging must be manufactured in such a way as to enable the recycling of a certain percentage by weight of the materials used into the manufacture of marketable products, in compliance with current standards in the European Union. The establishment of this percentage may vary, depending on the type of material of which the packaging is composed.
(2) Packaging waste processed for the purpose of energy recovery must have a minimum inferior calorific value to allow optimisation of energy recovery.
(3) Packaging waste processed for the purpose of composting must be of such a biodegradable nature that it should not hinder the separate collection and the composting process or activity into which it is introduced.
(4) Biodegradable packaging waste must be of such a nature that it is capable of undergoing physical, chemical, thermal or biological decomposition such that most of the finished compost ultimately decomposes into carbon dioxide, biomass and water.
Regulation 5(3)(a)
1.—(1) The plastic crate or plastic pallet must be, or must have been, manufactured in a controlled recycling process, that is to say a process in which the recycled material originates only from other plastic crates or plastic pallets and in which the introduction of external materials is the minimum which is technically feasible but in any event does not exceed 20 per cent by weight.U.K.
(2) No regulated metal must be intentionally introduced as an element during the manufacture or distribution of the plastic crate or plastic pallet provided always that the incidental presence of any of these elements must be permitted.
(3) The concentration levels of regulated metals in the plastic crate or plastic pallet may only exceed the levels referred to in regulation 5 as a result of the addition of recycled materials.
2.—(1) The plastic crate or plastic pallet must be introduced in a controlled distribution and reuse system and the following requirements must be complied with—U.K.
(a)the plastic crate or plastic pallet containing regulated metals must be identified in a permanent and visible way;
(b)a system of inventory and record keeping must be established, which must include a method of regulatory and financial accountability, to document the compliance with the requirements set out in this Schedule including the return rates. The return rates are the percentage of returnable entities which are not discarded after use but are returned to the manufacturer of the packaging or the responsible person or an authorised representative established in the European Union of the said manufacturer or the responsible person, as the case may be. The said return rates must be as high as possible but in no case lower than 90 per cent over the lifetime of the said crate or pallet;
(c)in addition the system must account for all the reusable entities put into, and removed from, service; and
(d)all returned plastic crates or plastic pallets that are no longer reusable must be either disposed of by a procedure specifically authorised by the Environment Agency in England, the Natural Resources Body for Wales in Wales, the Department of the Environment in Northern Ireland and the Scottish Environment Protection Agency in Scotland or be recycled in a recycling process in which the recycled material is made up of plastic crates or plastic pallets in the circuit and the introduction of external material is the minimum which is technically feasible but in any event does not exceed 20 per cent by weight.
(2) The manufacturer or the manufacturer’s authorised representative established in the European Union must—
(a)draw up on an annual basis a written declaration of conformity, including an annual report demonstrating how the conditions in this Schedule have been complied with; the declaration of conformity must contain a list of any changes to the system and the manufacturer’s authorised representatives; and
(b)retain the documentation referred to in paragraph (a) at the disposal of the enforcement authority for inspection purposes for a period of four years from the date of its drawing up;
provided always that where neither the manufacturer nor the manufacturer’s authorised representative is established within the EU, the responsible person who places the product on the market must keep and, upon request, make available to the enforcement authority, the documentation referred to in paragraph (a).
Regulation 5(3)(b)
1.—(1) No regulated metals must be intentionally introduced during the manufacturing process of glass packaging.U.K.
(2) The concentration levels of regulated metals in glass packaging may only exceed the level referred to in regulation 5 as a result of the addition of recycled materials.
2.—(1) The manufacturer or the manufacturer’s authorised representative, or, where neither the manufacturer nor the manufacturer’s authorised representative is established within the EU, the responsible person who places the product on the market, must submit a report in accordance with sub-paragraph (2) to the enforcement authority, where the average heavy metals concentration levels on any twelve consecutive monthly controls made from the production of each individual glass furnace, representative of normal and regular production activity, exceeds a concentration level of 200 ppm.U.K.
(2) The report must include as a minimum the following information—
measures values;
description of measurement methods employed;
suspected sources for the presence of heavy metals concentration levels; and
detailed description of the measures taken to reduce the heavy metals concentration levels.
(3) Measurement results from production sites and measurement methods employed must be made available at any time to the enforcement authority, if requested.
Regulation 7(2)
1.—(1) For the purposes of providing for the enforcement of these Regulations —U.K.
(a)sections 14, 15, 31, 32, 37, 44 and 47 of the 1987 Act apply and, in respect of proceedings for contravention of those sections, as if—
(i)references to safety provisions and to Part II of the 1987 Act were references to these Regulations;
(ii)references to goods were references to packaging; and
(iii)in section 14, in sub-section (6), for “six months” there were substituted “three months”;
(b)sections 39 and 40 of the 1987 Act apply to offences under section 32 of that Act as it is applied to these Regulations by sub-paragraph (a);
(c)in England and Wales, and Northern Ireland, a magistrates’ court may try an information in respect of an offence committed under these Regulations if the information is laid within 12 months from the time when the offence is committed; and
(d)in Scotland summary proceedings for an offence committed under these Regulations may be begun at any time within 12 months from the time when the offence is committed.
2. Nothing in this Schedule authorises any enforcement authority to bring proceedings in Scotland for an offence.U.K.
3. An enforcement authority must, whenever the Secretary of State so directs, make a report to the Secretary of State on the exercise of the functions exercisable by that authority under these Regulations.U.K.
Regulation 3(4)
Illustrative examples for criterion in regulation 3(3)(a)—
Packaging
Sweet boxes
Film overwrap around a CD case
Mailing pouches for catalogues and magazines (with a magazine inside)
Cake doilies sold with a cake
Rolls, tubes and cylinders around which flexible material (e.g. plastic film, aluminium, paper) is wound, except rolls, tubes and cylinders intended as parts of production machinery and not used to present a product as a sales unit
Flower pots intended to be used only for the selling and transporting of plants and not intended to stay with the plant throughout its lifetime
Glass bottles for injection solutions
CD spindles (sold with CDs, not intended to be used as storage)
Clothes hangers (sold with a clothing item)
Matchboxes
Sterile barrier systems (pouches, trays and materials necessary to preserve the sterility of the product)
Beverage system capsules (e.g. coffee, cacao, milk) which are left empty after use
Refillable steel cylinders used for various kinds of gas, excluding fire extinguishers
Non-packaging
Flower pots intended to stay with the plant throughout its lifetime
Tool boxes
Tea bags
Wax layers around cheese
Sausage skins
Clothes hangers (sold separately)
Beverage system coffee capsules, coffee foil pouches, and filter paper coffee pods disposed together with the used coffee product
Cartridges for printers
CD, DVD and video cases (sold together with a CD, DVD or video inside)
CD spindles (sold empty, intended to be used as storage)
Soluble bags for detergents
Graveside lights (containers for candles)
Mechanical quern (integrated in a refillable recipient, e.g. refillable pepper mill)
Illustrative examples for criterion in regulation 3(3)(b)—
Packaging, if designed and intended to be filled at the point of sale
Paper or plastic carrier bags
Disposable plates and cups
Cling film
Sandwich bags
Aluminium foil
Plastic foil for cleaned clothes in laundries
Non-packaging
Stirrer
Disposable cutlery
Wrapping paper (sold separately)
Paper baking cases (sold empty)
Cake doilies sold without a cake
Illustrative examples for criterion in regulation 3(3)(c)—
Packaging
Labels hung directly on or attached to a product
Part of packaging
Mascara brush which forms part of the container closure
Sticky labels attached to another packaging item
Staples
Plastic sleeves
Device for measuring dosage which forms part of the container closure for detergents
Mechanical quern (integrated in a non-refillable recipient, filled with a product, eg. pepper mill filled with pepper)
Non-packaging
Radio frequency identification (RFID) tags.
Regulation 16
(1) | (2) | (3) |
---|---|---|
Regulations revoked | References | Extent of revocation |
The Packaging (Essential Requirements) Regulations 2003 | S.I. 2003/1941 | The whole Regulations |
The Packaging (Essential Requirements) (Amendment) Regulations 2004 | S.I. 2004/1188 | The whole Regulations |
Hazardous Waste (England and Wales) Regulations 2005 | S.I. 2005/894 | Paragraphs 38 and 39 of Part 2 of Schedule 11 |
Hazardous Waste Regulations (Northern Ireland) 2005 | S.R. (N.I.) 2005 No. 300 | Paragraph 11 of Part 2 of Schedule 10 |
Hazardous Waste (Wales) Regulations 2005 | S.I. 2005/1806 (W.138) | Paragraph 41 of Part 2 of Schedule 11 |
The Packaging (Essential Requirements) (Amendment) Regulations 2006 | S.I. 2006/1492 | The whole Regulations |
The Packaging (Essential Requirements) (Amendment) Regulations 2009 | S.I. 2009/1504 | The whole Regulations |
The Waste (England and Wales) Regulations 2011 | S.I. 2011/988 | Paragraph 15 of Part 2 of Schedule 4 |
The Waste (Scotland) Regulations 2011 | S.S.I. 2011/226 | Paragraph 12 of Part 2 of the Schedule |
The Natural Resources Body for Wales (Functions) Order 2013 | S.I. 2013/755 (W.90) | Paragraph 169 of Schedule 4 |
The Packaging (Essential Requirements) (Amendment) Regulations 2013 | S.I. 2013/2212 | The whole Regulations |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: