- Latest available (Revised)
- Point in Time (31/12/2022)
- Original (As made)
Point in time view as at 31/12/2022.
The Non-automatic Weighing Instruments Regulations 2016 is up to date with all changes known to be in force on or before 11 September 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
1.—(1) These Regulations may be cited as the Non-automatic Weighing Instruments Regulations 2016.
(2) These Regulations come into force on 28th December 2016.
(3) These Regulations extend to Northern Ireland except for Part 7.
2.—(1) In these Regulations—
F1...
F2...
[F3“approved body” has the meaning given to it in regulation 47 (approved bodies);]
“authorised representative” means any person established [F4in the United Kingdom] who has received a written mandate from a manufacturer to act on the manufacturer's behalf in relation to specified tasks;
F5...
“commencement date” means the date referred to in regulation 1(2);
F6...
“competent authority” means a person who is, pursuant to regulation 62 (competent authorities and enforcement proceedings), authorised to enforce these Regulations;
“compliance notice” means a notice served in accordance with regulation 63(2);
“conformity assessment” means the process demonstrating whether the essential requirements relating to a regulated non-automatic weighing instrument have been met;
“conformity assessment body” means a body that performs conformity assessment activities including calibration, testing, certification and inspection;
[F7“conformity assessment procedure” means a procedure referred to in regulation 36;]
[F7“declaration of conformity” means a declaration of conformity required to be drawn up in accordance with Chapter 2 of Part 3;]
[F7“designated standard” has the meaning given to it in regulation 2A;]
“the Directive” means Directive 2014/31/EU of the European Parliament and of the Council of 26th February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments M1 and references to the Directive (or a specific provision of it) are references to the Directive (or that provision) [F8(as it has effect immediately before IP completion day)];
[F9“disqualification mark” means a marking in the form set out in paragraph 1 of Schedule A1;]
“distributor” means any person in the supply chain, other than a manufacturer or an importer, who makes a non-automatic weighing instrument available on the market;
“economic operator” means a manufacturer, authorised representative, importer or distributor;
“enforcement notice” means a notice served in accordance with regulation 64(2);
“enforcement officer” means—
an inspector; or
a person appointed by the Secretary of State to act on the Secretary of State's behalf to enforce these Regulations;
“essential requirements” means, in relation to a regulated non-automatic weighing instrument (or a class of that instrument), the requirements specified as being applicable in relation to that regulated non-automatic weighing instrument (or that class of instrument) in [F10Schedule 6] ;
F11...
F12...
F13...
[F14“importer” means a person who—
is established in the United Kingdom and places a non-automatic weighing instrument from a country outside of the United Kingdom on the market; or
is established in Northern Ireland and places a non-automatic weighing instrument on the market that has been supplied to them for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge, from an EEA state;]
“in writing” includes text that is—
transmitted by electronic means;
received in legible form; and
capable of being used for subsequent reference.
“M marking” means a marking applied to a regulated non-automatic weighing instrument which consists of the capital letter ‘M’ and the last two digits of the year of its affixing surrounded by a rectangle, the height of which is equal to that of the [F15UK] marking applied to that instrument;
“make available on the market” means any supply of a non-automatic weighing instrument for distribution or use on the [F16market of Great Britain] in the course of a commercial activity, whether in return for payment or free of charge and related expressions are to be construed accordingly;
“manufacturer” means any person who—
manufactures a non-automatic weighing instrument or has a non-automatic weighing instrument designed or manufactured and markets that instrument under their name or trademark; or
is to be treated as a manufacturer by virtue of regulation 5(2);
“market surveillance authority” means the Secretary of State acting in the capacity of market surveillance authority pursuant to the designation made by regulation 57 (the market surveillance authority), and, where the context requires, a market surveillance authority in another EEA state;
F17...
“non-automatic weighing instrument” means a weighing instrument that—
serves to determine the mass of a body by using the action of gravity on that body and which may also serve to determine other mass-related magnitudes, quantities, parameters and characteristics; and
requires the intervention of an operator during weighing;
“notified body” means a conformity assessment body that has been notified to the Commission in accordance with Part 5 and includes, where the context so requires, a notified body designated as such in another EEA state in accordance with the Directive;
F18...
F19...
“place on the market” means the first making available of a non-automatic weighing instrument on the market [F20of Great Britain] and related expressions are to be construed accordingly;
“RAMS” means Regulation (EC) 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 M2 (as amended from time to time);
“recall” means any measure aimed at achieving the return of a regulated non-automatic weighing instrument that has already been made available to the end-user and related expressions are to be construed accordingly;
“regulated non-automatic weighing instrument” means a non-automatic weighing instrument which is intended to be used to perform one of the functions referred to in regulation 3(2);
“relevant economic operator” means, in relation to a non-automatic weighing instrument, an economic operator with obligations in respect of that non-automatic weighing instrument under Part 2;
[F21“re-qualification mark” means a marking in the form set out in paragraph 2 of Schedule A1;]
“technical documentation” means the documentation which meets the requirements of [F22Schedule 7];
“technical specification” means a document that prescribes technical requirements to be fulfilled by a regulated non-automatic weighing instrument;
[F23“Type-examination certificate” means a type-examination certificate issued by an approved body in accordance with Module B of Schedule 7;]
[F23“UK marking” means the marking in the form set out in Annex 2 of RAMS;]
[F23“UK national accreditation body” means the body appointed by the Secretary of State in accordance with Article 4 of RAMS;]
F24...
“United Kingdom Accreditation Service” means the company limited by guarantee incorporated in England and Wales under number 3076190;
“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985;
“withdraw” when used in relation to a regulated non-automatic weighing instrument means taking any measure aimed at preventing an instrument in the supply chain from being made available on the market and related expressions are to be construed accordingly.
[F25(1A) Schedules 6 to 8 reproduce the provisions of Annexes I to III to the Directive (respectively) with amendments to correct deficiencies in retained EU law.
(1B) A reference to any provision of Schedules 6 to 8 is a reference to the equivalent provision of the relevant Annex to the Directive as set out in the relevant Schedule.]
F26(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(3) Other expressions used in these Regulations have in relation to the application of these Regulations to—
(a)Great Britain, the same meanings as in the Weights and Measures Act 1985 M3; and
(b)Northern Ireland, the same meanings as in the Weights and Measures (Northern Ireland) Order 1981 M4.
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 5 para. 1(4)(a)
F5Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(e) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(f) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(g) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(h) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/852, regs. 2(2), 4(2), Sch. 1 para. 1(o)(ii)); 2020 c. 1, Sch. 5 para. 1(1)
F9Words in reg. 2(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(2)(a)
F10Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 2(ha) (as inserted by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(3)(b))
F11Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(i) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F12Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(j) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F13Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(k) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F14Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(l) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(2)); 2020 c. 1, Sch. 5 para. 1(1)
F15Word in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(m) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F16Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 2(2)(n) (as substituted by The Product Safety and Metrology etc. (Amendment to Extent and Meaning of Market) (EU Exit) Regulations 2020 (S.I. 2020/676), regs. 1(1), 4(14)(a))
F17Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(o) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F18Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(p) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F19Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(q) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F20Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 2(2)(r) (as substituted by The Product Safety and Metrology etc. (Amendment to Extent and Meaning of Market) (EU Exit) Regulations 2020 (S.I. 2020/676), regs. 1(1), 4(14)(b))
F21Words in reg. 2(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(2)(b)
F22Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(s) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F23Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(t) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F24Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(2)(u) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F25Reg. 2(1A)(1B) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(3) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F26Reg. 2(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 2(4) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Marginal Citations
M1OJ L 96, 29.3.2014 p. 107.
M2OJ L 218, 13.8.2008, p. 30.
2.—(1) In these Regulations—
“accreditation” means accreditation as defined in point 10 of Article 2 of RAMS;
“accreditation certificate” means a certificate, issued by the United Kingdom Accreditation Service or a national accreditation body as defined in point 11 of Article 2 of RAMS in another [F144relevant] state, attesting that a conformity assessment body meets the notified body requirements;
“authorised representative” means any person established within the [F145relevant market] who has received a written mandate from a manufacturer to act on the manufacturer's behalf in relation to specified tasks;
“CE marking” means a marking which takes the form set out in Annex II of RAMS;
“commencement date” means the date referred to in regulation 1(2);
“Commission” means the Commission of the European Union:
“competent authority” means a person who is, pursuant to regulation 62 (competent authorities and enforcement proceedings), authorised to enforce these Regulations;
“compliance notice” means a notice served in accordance with regulation 63(2);
“conformity assessment” means the process demonstrating whether the essential requirements relating to a regulated non-automatic weighing instrument have been met;
“conformity assessment body” means a body that performs conformity assessment activities including calibration, testing, certification and inspection;
“the Directive” means Directive 2014/31/EU of the European Parliament and of the Council of 26th February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments F146 and references to the Directive (or a specific provision of it) are references to the Directive (or that provision) as from time to time amended;
[F9“disqualification mark” means a marking in the form set out in paragraph 1 of Schedule A1;]
“distributor” means any person in the supply chain, other than a manufacturer or an importer, who makes a non-automatic weighing instrument available on the market;
“economic operator” means a manufacturer, authorised representative, importer or distributor;
“enforcement notice” means a notice served in accordance with regulation 64(2);
“enforcement officer” means—
an inspector; or
a person appointed by the Secretary of State to act on the Secretary of State's behalf to enforce these Regulations;
“essential requirements” means, in relation to a regulated non-automatic weighing instrument (or a class of that instrument), the requirements specified as being applicable in relation to that regulated non-automatic weighing instrument (or that class of instrument) in Annex I to the Directive;
“EU declaration of conformity” means a declaration of conformity required to be drawn up in accordance with Chapter 2 of Part 3;
“EU-type examination certificate” means an EU-type examination certificate issued by a notified body in accordance with Module B of Annex II to the Directive;
“harmonised standard” has the meaning set out in point 1(c) of Article 2 of Regulation (EU) No. 1025/2012 of the European Parliament and of the Council on European standardisation F147 (as amended from time to time);
“importer” means any person who—
“in writing” includes text that is—
transmitted by electronic means;
received in legible form; and
capable of being used for subsequent reference.
“M marking” means a marking applied to a regulated non-automatic weighing instrument which consists of the capital letter ‘M’ and the last two digits of the year of its affixing surrounded by a rectangle, the height of which is equal to that of the CE marking applied to that instrument;
“make available on the market” means any supply of a non-automatic weighing instrument for distribution or use on the [F150relevant market] in the course of a commercial activity, whether in return for payment or free of charge and related expressions are to be construed accordingly;
“manufacturer” means any person who—
manufactures a non-automatic weighing instrument or has a non-automatic weighing instrument designed or manufactured and markets that instrument under their name or trademark; or
is to be treated as a manufacturer by virtue of regulation 5(2);
“market surveillance authority” means the Secretary of State acting in the capacity of market surveillance authority pursuant to the designation made by regulation 57 (the market surveillance authority), and, where the context requires, a market surveillance authority in another [F151relevant] state;
“national accreditation body” means the national accreditation body as defined in point 11 of Article 2 of RAMS;
[F152“NI Protocol obligation” means any obligation created or arising by or under the Protocol on Ireland/ Northern Ireland in the EU withdrawal agreement, whether or not an obligation to which section 7A(2) of the European Union (Withdrawal) Act 2018 applies;]
“non-automatic weighing instrument” means a weighing instrument that—
serves to determine the mass of a body by using the action of gravity on that body and which may also serve to determine other mass-related magnitudes, quantities, parameters and characteristics; and
requires the intervention of an operator during weighing;
“notified body” means a conformity assessment body that has been notified to the Commission in accordance with Part 5 and includes, where the context so requires, a notified body designated as such in another [F153relevant] state in accordance with the Directive;
“notified body requirements” means the requirements set out in Schedule 3 (requirements related to notified bodies)
“notifying authority” means the notifying authority within the meaning of regulation 48 (the notifying authority);
“place on the market” means the first making available of a non-automatic weighing instrument on the [F154relevant market] and related expressions are to be construed accordingly;
“RAMS” means Regulation (EC) 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 F155 (as amended from time to time);
“recall” means any measure aimed at achieving the return of a regulated non-automatic weighing instrument that has already been made available to the end-user and related expressions are to be construed accordingly;
“regulated non-automatic weighing instrument” means a non-automatic weighing instrument which is intended to be used to perform one of the functions referred to in regulation 3(2);
“relevant economic operator” means, in relation to a non-automatic weighing instrument, an economic operator with obligations in respect of that non-automatic weighing instrument under Part 2;
[F156“relevant market” means—
the market in Northern Ireland; and
the market of the EEA states;]
[F156“relevant state” means—
Northern Ireland; or
any EEA state;]
[F21“re-qualification mark” means a marking in the form set out in paragraph 2 of Schedule A1;]
“technical documentation” means the documentation which meets the requirements of Annex II to the Directive;
“technical specification” means a document that prescribes technical requirements to be fulfilled by a regulated non-automatic weighing instrument;
[F157“UK(NI) indication” means the marking in the form set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020;]
“Union harmonisation legislation” means any European Union legislation harmonising the conditions for the marketing of products;
“United Kingdom Accreditation Service” means the company limited by guarantee incorporated in England and Wales under number 3076190;
“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985;
“withdraw” when used in relation to a regulated non-automatic weighing instrument means taking any measure aimed at preventing an instrument in the supply chain from being made available on the market and related expressions are to be construed accordingly.
(2) A non-automatic weighing instrument that meets the requirements of the Directive by virtue of the laws of another [F158relevant] state is to be treated as meeting the requirements of these Regulations (except any requirement of these Regulations for anything to be written in English) and references to a non-automatic weighing instruments being in conformity with these Regulations are to be construed accordingly.
(3) Other expressions used in these Regulations have in relation to the application of these Regulations to—
(a)Great Britain, the same meanings as in the Weights and Measures Act 1985 F159; and
(b)Northern Ireland, the same meanings as in the Weights and Measures (Northern Ireland) Order 1981 F160.
Extent Information
E38This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F9Words in reg. 2(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(2)(a)
F21Words in reg. 2(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(2)(b)
F144Word in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(a)(i)
F145Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(b)
F146OJ L 96, 29.3.2014 p. 107.
F147OJ L 316, 14.11.2012, p. 12.
F148Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(c)(i)
F149Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(c)(ii)
F150Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(e)
F151Word in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(a)(ii)
F152Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(d)
F153Word in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(a)(iii)
F154Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(f)
F155OJ L 218, 13.8.2008, p. 30.
F156Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(1)(g)
F157Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 2 para. 11(2)
F158Word in reg. 2(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 2(2)
2A.—(1) Subject to paragraphs (6) and (7), in these Regulations a “designated standard” means a technical specification which is—
(a)adopted by a recognised standardisation body [F28or an international standardising body], for repeated or continuous application, with which compliance is not compulsory; and
(b)designated by the Secretary of State by publishing the reference to the standard and maintaining that publication in a manner the Secretary of State considers appropriate.
(2) For the purposes of paragraph (1), a “technical specification” means a document that prescribes technical requirements to be fulfilled by a non-automatic weighing instrument, process, service or system and which lays down one or more of the following—
(a)the characteristics required of a non-automatic weighing instrument, including—
(i)levels of quality, performance, interoperability, environmental protection, health, safety or dimensions, and
(ii)the requirements applicable to the non-automatic weighing instrument as regards the name under which the measuring instrument is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures; and
(b)production methods and processes relating to the non-automatic weighing instrument, where these have an effect on the characteristics of the non-automatic weighing instrument.
(3) For the purposes of this regulation a “recognised standardisation body” means any one of the following organisations—
(a)the European Committee for Standardisation (CEN);
(b)the European Committee for Electrotechnical Standardisation (Cenelec);
(c)the European Telecommunications Standards Institute (ETSI);
(d)the British Standards Institution (BSI).
[F29(3A) In this regulation “international standardising body” has the same meaning as it has for the purposes of the Agreement on Technical Barriers to Trade, part of Annex 1A to the agreement establishing the World Trade Organisation signed at Marrakesh on 15 April 1994 (as modified from time to time).]
(4) When considering whether the manner of publication of a reference is appropriate in accordance with paragraph (1)(b), the Secretary of State must have regard to whether the publication will draw the standard to the attention of any persons who may have an interest in the standard.
(5) Before publishing the reference to a technical specification adopted by the British Standards Institution, the Secretary of State must have regard to whether the technical specification is consistent with [F30such] technical specifications adopted by the other recognised standardisation bodies [F31or by international standardising bodies as the Secretary of State considers to be relevant.]
(6) The Secretary of State may remove from publication the reference to a standard which has been published in accordance with paragraph (1)(b).
(7) Where the Secretary of State removes the reference to a standard from publication, that standard is no longer a designated standard.
(8) The Secretary of State may by regulations amend paragraph (3) to reflect any changes in the name or structure of the recognised standardisation bodies.
(9) Regulations made under paragraph (8) are to be made by statutory instrument.
(10) A statutory instrument containing regulations made under paragraph (8) is subject to annulment in pursuance of a resolution of either House of Parliament.]
Textual Amendments
F27Reg. 2A inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 3 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F28Words in reg. 2A(1)(a) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 15(a); S.I. 2020/1662, reg. 2(ee)
F29Reg. 2A(3A) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 15(b); S.I. 2020/1662, reg. 2(ee)
F30Word in reg. 2A(5) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 15(c)(i); S.I. 2020/1662, reg. 2(ee)
F31Words in reg. 2A(5) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 15(c)(ii); S.I. 2020/1662, reg. 2(ee)
3.—(1) Subject to regulation 4 (revocations and transitional and consequential provisions), these Regulations apply to non-automatic weighing instruments.
(2) These Regulations, except Part 4, apply to an instrument (referred to in these Regulations as a “regulated non-automatic weighing instrument”) for use for any of the following purposes—
(a)the determination of mass for commercial transactions;
(b)the determination of mass for the calculation of a toll, tariff, tax, bonus, penalty, remuneration, indemnity or similar type of payment;
(c)the determination of mass for the application of laws or regulations or for an expert opinion given in court proceedings;
(d)the determination of mass in the practice of medicine for weighing patients for the purposes of monitoring, diagnosis and medical treatment;
(e)the determination of mass for making up medicines on prescription in a pharmacy and determination of mass in analyses carried out in medical and pharmaceutical laboratories; and
(f)the determination of price on the basis of mass for the purposes of direct sales to the public and the making up of prepackages.
(3) Part 4 applies to a non-automatic weighing instrument that is not a regulated instrument.
4.—(1) The Non-automatic Weighing Instruments Regulations 2000 M5 and the Non-automatic Weighing Instruments (Amendment) Regulations 2008 M6 are revoked.
(2) In this regulation, “the former law” means the Regulations referred to in paragraph (1) [F32subject to the modifications made in paragraph (3A)].
(3) This paragraph applies to a regulated non-automatic weighing instrument placed on the market before the commencement date which was required by any provision of the former law to meet the essential requirements.
[F33(3A) The modifications referred to in paragraph (2) are as follows—
(a)in the Non-automatic Weighing Instruments Regulations 2000 and the Non-automatic Weighing Instruments (Amendment) Regulations 2008—
(i)any reference to “the Community” is to be read as including the United Kingdom;
(ii)references to “member State” is to be read as including the United Kingdom;
(b)in the Non-automatic Weighing Instruments Regulations 2000—
(i)omit regulation 10(14);
(ii)in regulations 25(6)(a)(i) and 25(7)(a) for “; and” substitute “ . ”; and
(iii)omit regulations 25(6)(a)(ii), 25(6)(b) and 25(7)(b).]
(4) A regulated non-automatic weighing instrument to which paragraph (3) applies which meets the requirements of the former law applicable to it is to be treated as meeting the requirements of these Regulations.
(5) Where a regulated non-automatic weighing instrument to which paragraph (3) applies does not meet the requirements of the former law, these Regulations apply to that instrument as they apply to a regulated instrument placed on the market or put into service after the commencement date which does not comply with the requirements of these Regulations.
(6) Part 7 (use for trade of regulated non-automatic weighing instruments for the purposes listed in regulation 3(2)) applies to regulated non-automatic weighing instruments to which paragraph (3) applies as it applies to a regulated instrument placed on the market or put into service after the commencement date.
(7) A certificate granted under any provision of the former law has effect as if granted under the corresponding provision of these Regulations.
(8) In the list in paragraph 10 in Schedule 5 to the Consumer Rights Act 2015 M7, insert at the appropriate place the following entry—
“regulation 62 of the Non-automatic Weighing Instruments Regulations 2016 (S.I. 2016/1152)”.
(9) In the table in paragraph 11 of Schedule 5 to the Consumer Rights Act 2015, omit the entry relating to the Non-automatic Weighing Instruments Regulations 2000.
(10) An application to be a recognised as a notified body which is made before the commencement date is to be treated as having been made under these Regulations if it meets the requirements of these Regulations.
(11) Except in a case where paragraph (10) applies, a requirement of these Regulations (“the relevant requirement”) is to be treated as having been satisfied by anything done on or after 20th April 2016 but before the commencement date where that thing—
(a)was done for the purposes of complying with a requirement of the Directive; and
(b)if it had been done on or after the commencement date it would have met the relevant requirement.
Textual Amendments
F32Words in reg. 4(2) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 4(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F33Reg. 4(3A) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 4(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Marginal Citations
4A.—(1) In this regulation—
“pre-exit period” means the period beginning with the commencement date and ending immediately before IP completion day.
(2) Subject to paragraph (3), where a non-automatic weighing instrument was made available on the market during the pre-exit period, despite the amendments made by Schedule 26 to the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 F35, any obligation to which a person was subject under these Regulations as they had effect immediately before IP completion day, continues to have effect as it did immediately before IP completion day, in relation to that non-automatic weighing instrument.
(3) Paragraph (2) does not apply to—
(a)any obligation of any competent authority to inform the European Commission or Member States of any matter; or
(b)any obligation to take action outside of the United Kingdom in respect of that non-automatic weighing instrument.
(4) Where during the pre-exit period—
(a)a non-automatic weighing instrument has not been placed on the market; and
(b)a manufacturer has taken any action under regulation 36 as it had effect immediately before IP completion day in relation to that non-automatic weighing instrument,
that action has effect as if it had been done under regulation 36 as it had effect on and after IP completion day.]
[F36(5) Where paragraph (6) applies to a regulated non-automatic weighing instrument, regulations 67 and 68 have effect subject to the modifications in paragraph (7).
(6) This paragraph applies to a regulated non-automatic weighing instrument that has been placed on the market—
(a)during the pre-exit period; or
(b)pursuant to Article 41 of the EU withdrawal agreement.
(7) The modifications referred to in paragraph (5) are that—
(a)the reference in regulation 67(1)(a) to “UK marking” is to be read as a reference to the CE marking within the meaning of Article 2(19) of the Directive;
(b)the reference in regulation 67(1)(b) to “M marking” is to be read as a reference to the supplementary metrology marking as described in Article 16(2) of the Directive;
(c)the reference in regulation 67(1)(c) to “approved body” is to be read as a reference to the body that undertook any conformity assessment procedure in accordance with Article 13 of the Directive;
(d)the references in regulations 67(2)(b) and 68(4)(b) to “type examination certificate” are to be read as references to an EU-type examination certificate, issued in accordance with the conformity assessment procedure set out in point 1 of Annex II to the Directive, known as “Module B”.
[F37(8) Subject to paragraph (9), where before 11pm on 31st December 2024—
(a)a non-automatic weighing instrument has not been placed on the market or put into service; and
(b)a manufacturer has taken any action under the conformity assessment procedure that applies to that product in accordance with Article 13 of the Directive
that action has effect as if it had been done under the applicable conformity assessment procedure referred to in regulation 36.
(9) Paragraph (8) does not apply—
(a)after the expiry of the validity of any certificate issued pursuant to the applicable conformity assessment procedure; and
(b)in any event, after 31st December 2027.]]
Textual Amendments
F34Reg. 4A inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 5 (as amended by S.I. 2020/676, regs. 1(1), 2 and further amended by S.I. 2020/852, regs. 2(2), 4(2), Sch. 1 para. 1(o)(iii)); 2020 c. 1, Sch. 5 para. 1(1)
F36Reg. 4A(5)-(7) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(2)
5.—(1) This Chapter applies in relation to the placing on the market of a regulated non-automatic weighing instrument by a manufacturer.
(2) The obligations in this Chapter also apply to an importer or distributor who—
(a)places a regulated non-automatic weighing instrument on the market under the name or trade mark of that importer or distributor; or
(b)modifies a regulated non-automatic weighing instrument already placed on the market in such a way that compliance with these Regulations may be affected,
and the expression “manufacturer” is to be construed accordingly.
6.—[F38(1)] A manufacturer must not place on the market a regulated non-automatic weighing instrument unless the manufacturer has—
(a)designed and manufactured the instrument in accordance with the essential requirements;
(b)drawn up technical documentation in relation to the instrument;
(c)carried out (or procured the carrying out of) the relevant conformity assessment procedure which has demonstrated compliance of the instrument with the applicable requirements;
(d)drawn up [F39a] declaration of conformity; and
(e)affixed to the instrument [F40or where paragraph (2) applies, in respect of the UK marking, to a label affixed to a product or to a document accompanying the product] —
(i)the [F41UK] marking; and
(ii)the M marking.
[F42(2) For a period of [F43seven years] beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the instrument; or
(b)to a document accompanying the instrument.]
Extent Information
E2This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F38Reg. 6 renumbered as reg. 6(1) (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(a) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F39Word in reg. 6(1)(d) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(b) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F40Words in reg. 6(1)(e) inserted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(c)(i) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F41Word in reg. 6(1)(e) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(c)(ii) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F42Reg. 6(2) inserted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(d) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460)), reg. 1(4), Sch. 3 para. 18(3))
F43Words in reg. 6(2) substituted (E.W.S) (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2 para. (o)
6. A manufacturer must not place on the market a regulated non-automatic weighing instrument unless the manufacturer has—
(a)designed and manufactured the instrument in accordance with the essential requirements;
(b)drawn up technical documentation in relation to the instrument;
(c)carried out (or procured the carrying out of) the relevant conformity assessment procedure which has demonstrated compliance of the instrument with the applicable requirements;
(d)drawn up an EU declaration of conformity; and
(e)affixed to the instrument—
(i)the CE marking; and
(ii)the M marking.
Extent Information
E39This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
7. A manufacturer must keep the technical documentation and the [F44EU] declaration of conformity for a period of 10 years beginning with the day after the day on which the regulated non-automatic weighing instrument to which it relates has been placed on the market.
Textual Amendments
F44Word in reg. 7 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 7 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
8.—(1) Manufacturers must have procedures in place for series production of regulated non-automatic weighing instruments by them to ensure that instruments so manufactured continue to meet the essential requirements.
(2) These procedures must adequately take into account changes in—
(a)regulated non-automatic weighing instrument design or characteristics; and
(b)changes in the [F45designated] standards or in other technical specifications by reference to which the conformity of the regulated non-automatic weighing instrument is declared.
(3) When deemed appropriate with regard to the risks presented by the use of a regulated non-automatic weighing instrument, a manufacturer must—
(a)carry out sample testing of regulated non-automatic weighing instruments made available by the manufacturer on the market;
(b)investigate complaints about regulated non-automatic weighing instruments made available by the manufacturer on the market;
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments; and
(iii)regulated non-automatic weighing instrument recalls; and
(d)keep distributors informed of any monitoring action the manufacturer has undertaken.
Extent Information
E3This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F45Word in reg. 8(2)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 8 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
8.—(1) Manufacturers must have procedures in place for series production of regulated non-automatic weighing instruments by them to ensure that instruments so manufactured continue to meet the essential requirements.
(2) These procedures must adequately take into account changes in—
(a)regulated non-automatic weighing instrument design or characteristics; and
(b)changes in the harmonised standards or in other technical specifications by reference to which the conformity of the regulated non-automatic weighing instrument is declared.
(3) When deemed appropriate with regard to the risks presented by the use of a regulated non-automatic weighing instrument, a manufacturer must—
(a)carry out sample testing of regulated non-automatic weighing instruments made available by the manufacturer on the market;
(b)investigate complaints about regulated non-automatic weighing instruments made available by the manufacturer on the market;
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments; and
(iii)regulated non-automatic weighing instrument recalls; and
(d)keep distributors informed of any monitoring action the manufacturer has undertaken.
Extent Information
E40This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
9.—(1) A manufacturer must ensure that a regulated non-automatic weighing instrument, which that manufacturer has placed on the market, bears a type, batch, serial number or other element allowing identification of the instrument.
(2) A manufacturer must ensure that a regulated non-automatic weighing instrument is marked with the information specified in Schedule 1 (information to be marked on regulated non-automatic weighing instruments) and in the manner required by that Schedule.
(3) Where a regulated non-automatic measuring instruments includes or is attached to devices which are not used or intended to be used for any of the purposes listed in regulation 3(2), the manufacturer must affix to those devices a symbol constituted by a capital letter (M) printed in black on a red background at least 25mm x 25mm square with two intersecting diagonals forming a cross.
(4) The symbol referred to in paragraph (3) must be affixed in a clearly visible and indelible form.
10.—(1) A manufacturer must indicate on every regulated non-automatic weighing instruments manufactured by that manufacturer, the manufacturer's name, registered trade name or registered trade mark and the postal address at which the manufacturer can be contacted.
(2) The address required by these Regulations must indicate a single point at which the manufacturer can be contacted.
(3) The contact details required by this regulation must be [F46clear, legible and in easily understandable] English.
Extent Information
E4This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F46Words in reg. 10(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 9 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
10.—(1) A manufacturer must indicate on every regulated non-automatic weighing instruments manufactured by that manufacturer, the manufacturer's name, registered trade name or registered trade mark and the postal address at which the manufacturer can be contacted.
(2) The address required by these Regulations must indicate a single point at which the manufacturer can be contacted.
(3) The contact details required by this regulation must be in a language that is easily understood by end-users and market surveillance authorities and in the case of regulated non-automatic weighing instruments made available in [F161Northern Ireland], they must be in English.
Extent Information
E41This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F161Words in reg. 10(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
11.—(1) A manufacturer must ensure that regulated non-automatic weighing instruments manufactured by that manufacturer are accompanied by instructions and information easily understood by end-users.
F47(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(3) Such instructions and information and any labelling relating to a regulated non-automatic weighing instrument must be [F48clear, legible and in easily understandable English].
Extent Information
E5This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F47Reg. 11(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 10(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F48Words in reg. 11(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 10(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
11.—(1) A manufacturer must ensure that regulated non-automatic weighing instruments manufactured by that manufacturer are accompanied by instructions and information easily understood by end-users.
(2) Where end-users are in [F162Northern Ireland], those instructions and information must be in English.
(3) Such instructions and information and any labelling relating to a regulated non-automatic weighing instrument must be clear, understandable and intelligible.
Extent Information
E42This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F162Words in reg. 11(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
12.—(1) This regulation applies where a manufacturer considers or has reason to believe that a regulated non-automatic weighing instrument placed on the market by that manufacturer is not in conformity with the requirements of these Regulations.
(2) The manufacturer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the manufacturer must immediately inform the competent [F49authority] to that effect giving details, in particular, of the non-compliance and of any corrective measures taken.
Extent Information
E6This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F49Word in reg. 12(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 11 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
12.—(1) This regulation applies where a manufacturer considers or has reason to believe that a regulated non-automatic weighing instrument placed on the market by that manufacturer is not in conformity with the requirements of these Regulations.
(2) The manufacturer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the manufacturer must immediately inform the competent national authorities of the [F163relevant] states in which the instrument has been made available on the market to that effect giving details, in particular, of the non-compliance and of any corrective measures taken.
Extent Information
E43This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F163Word in reg. 12(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(2)
13.—(1) A manufacturer must, further to a reasoned request from a competent authority, provide that authority, with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of a regulated non-automatic weighing instrument manufactured by that manufacturer with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) A manufacturer must co-operate with a competent authority, at the request of that authority, on any action to eliminate the risks posed by regulated non-automatic weighing instruments that the manufacturer has placed on the market.
14.—(1) A manufacturer may, by written mandate, appoint an authorised representative to discharge the responsibilities of that manufacturer under these Regulations in relation to the placing on the market of a regulated non-automatic weighing instrument.
(2) The authorised representative does not have the power to discharge the manufacturer's obligations under regulations 6(a) and 6(b).
(3) The authorised representative must be treated as authorised to—
(a)keep the [F50EU] declaration of conformity and the technical documentation at the disposal of the market surveillance authority for 10 years beginning with the day after the day on which a regulated non-automatic weighing instrument has been placed on the market;
(b)provide a competent authority further to a reasoned request from that authority with all the information and documentation necessary to demonstrate the conformity of a regulated non-automatic weighing instrument; and
(c)co-operate with a competent authority, at its request, on any action taken to eliminate the risks posed by regulated non-automatic weighing instruments covered by its mandate.
Textual Amendments
F50Word in reg. 14(3)(a) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 12 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
15. This Chapter applies to the placing on the market of a regulated non-automatic weighing instrument that is imported into the United Kingdom from a country outside the [F51United Kingdom].
Extent Information
E7This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F51Words in reg. 15 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 13 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
15. This Chapter applies to the placing on the market of a regulated non-automatic weighing instrument that is imported into [F164Northern Ireland] from a country outside the [F165relevant market].
Extent Information
E44This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F164Words in reg. 15 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
F165Words in reg. 15 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(3)
16.—(1) An importer must only place compliant regulated non-automatic weighing instruments on the market.
(2) An importer must ensure that—
(a)the appropriate conformity assessment procedure has been carried out by the manufacturer of the regulated non-automatic weighing instrument (or by the importer where the importer is to be regarded as the manufacturer by virtue of regulation 5(2);
(b)the manufacturer has drawn up the technical documentation (or that the importer has done so where the importer is treated as the manufacturer by virtue of regulation 5(2);
(c)the regulated non-automatic weighing instrument bears the [F52UK] marking and the M marking;
(d)the manufacturer (or the importer where he is treated as the manufacturer under regulation 5(2)) has complied with the requirements of regulations 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.) and 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments).
Extent Information
E8This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F52Word in reg. 16(2)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 14 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
16.—(1) An importer must only place compliant regulated non-automatic weighing instruments on the market.
(2) An importer must ensure that—
(a)the appropriate conformity assessment procedure has been carried out by the manufacturer of the regulated non-automatic weighing instrument (or by the importer where the importer is to be regarded as the manufacturer by virtue of regulation 5(2);
(b)the manufacturer has drawn up the technical documentation (or that the importer has done so where the importer is treated as the manufacturer by virtue of regulation 5(2);
(c)the regulated non-automatic weighing instrument bears the CE marking and the M marking;
(d)the manufacturer (or the importer where he is treated as the manufacturer under regulation 5(2)) has complied with the requirements of regulations 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.) and 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments).
Extent Information
E45This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
17. Where an importer considers, or has reason to believe, that the regulated non-automatic weighing instrument is not in conformity with the essential requirements and presents a risk, the importer must inform the manufacturer and the market surveillance authority.
18.—(1) An importer must indicate on any regulated non-automatic weighing instrument imported by that importer, the importer's name, registered trade name or trademark, and the postal address at which the importer can be contacted.
[F53(2) Paragraph (1) does not apply where—
(a)either—
(i)the importer would have to open the packaging in order to indicate the information on the instrument; or
(ii)the importer has imported the instrument from an EEA state or Switzerland and places it on the market within the period of [F54seven years] beginning with IP completion day, and
(b)before placing the instrument on the market, the importer sets out the information referred to in paragraph (1)—
(i)where sub-paragraph (a)(i) applies, on the packaging and in a document accompanying the instrument;
(ii)where sub-paragraph (a)(ii) applies, in a document accompanying the instrument.]
(3) The contact details required by this regulation must be [F55clear, legible and in easily understandable] English.
Extent Information
E9This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F53Reg. 18(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 15(a) (with Sch. 26 para. 5) (as amended by S.I. 2019/1246, regs. 1(3), 5; S.I. 2020/676, regs. 1(1), 2; S.I. 2020/852, regs. 2(2), 4(2), Sch. 1 para. 1(o)(iv) and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 2(1)(j)); 2020 c. 1, Sch. 5 para. 1(1)
F54Words in reg. 18(2)(a)(ii) substituted (E.W.S) (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 4, Sch. 3 para. (m)
F55Words in reg. 18(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 15(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Modifications etc. (not altering text)
C1Reg. 18 modified by The Conformity Assessment (Mutual Recognition Agreements) Regulations 2019 (S.I. 2019/392), reg. 6 (as inserted (temp.) (10.9.2019) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(2)(4), 2(3) (with reg. 18))
18.—(1) An importer must indicate on any regulated non-automatic weighing instrument imported by that importer, the importer's name, registered trade name or trademark, and the postal address at which the importer can be contacted.
(2) Where this would require the packaging to be opened, those indications may be given on the packaging and in a document accompanying the instrument.
(3) The contact details required by this regulation must be in a language that is easily understood by end-users and market surveillance authorities, and in the case of regulated non-automatic weighing instruments made available in [F166Northern Ireland], they must be in English.
Extent Information
E46This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F166Words in reg. 18(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
Modifications etc. (not altering text)
C2Reg. 18 modified by The Conformity Assessment (Mutual Recognition Agreements) Regulations 2019 (S.I. 2019/392), reg. 6 (as inserted (temp.) (10.9.2019) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(2)(4), 2(3) (with reg. 18))
19.—(1) An importer must ensure that regulated non-automatic weighing instruments imported by the importer are accompanied by instructions and information [F56which are clear, legible and in easily understandable English].
F57(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E10This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F56Words in reg. 19(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 16(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F57Reg. 19(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 16(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
19.—(1) An importer must ensure that regulated non-automatic weighing instruments imported by the importer are accompanied by instructions and information in a language easily understood by end users
(2) Where end users are in [F167Northern Ireland], the instructions and information referred to in paragraph (1) must be in English.
Extent Information
E47This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F167Words in reg. 19(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
20. An importer must, in respect of regulated non-automatic weighing instruments under the importer's responsibility, ensure that the conditions of their storage or transport are not such as to jeopardise their continuing compliance with the essential requirements.
21.—(1) When deemed appropriate with regard to the performance of a regulated non-automatic weighing instrument imported by an importer, the importer must—
(a)carry out a sample testing of regulated non-automatic weighing instruments made available on the market by the importer;
(b)investigate complaints about regulated non-automatic weighing instruments imported by them; and
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments;
(iii)regulated non-automatic weighing instrument recalls; and
(d)where the importer is not also the distributor of the regulated non-automatic weighing instrument, keep distributors, to whom he has supplied an instrument, informed of any monitoring undertaken by that importer.
22.—(1) This regulation applies where an importer considers, or has reason to believe, that a regulated non-automatic weighing instrument placed on the market by the importer is not in conformity with the requirements of these Regulations.
(2) Where this regulation applies, the importer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the non-automatic weighing instrument presents a risk, the importer must immediately inform the competent authority to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that importer.
23. The importer must, for a period of 10 years beginning with the day after the day on which the regulated non-automatic weighing instrument is placed on the market, keep a copy of the [F59EU] declaration of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities upon request.
Textual Amendments
F58Word in reg. 23 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 17 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F59Word in reg. 23 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 17 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
24.—(1) The importer must, further to a reasoned request from a competent authority, provide the competent authority with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the regulated non-automatic weighing instrument with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) An importer must co-operate with a competent authority, at its request, as regards any action to eliminate the risks posed by any regulated non-automatic weighing instrument that the importer has placed on the market.
25. This Chapter applies in relation to the making available on the market of a regulated non-automatic weighing instrument by a distributor.
26. Before making the regulated non-automatic instrument available on the market, the distributor must act with due care in relation to the requirements of these Regulations.
27.—(1) The distributor must verify that the regulated non-automatic weighing instrument bears the [F60UK] marking and the M marking.
(2) The distributor must verify that the regulated non-automatic weighing instrument, it is accompanied by instructions and information [F61which are clear, legible and in easily understandable English].
F62(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) The distributor must verify that the manufacturer and the importer have complied with the requirements set out in regulation 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.), regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) and regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments).
Extent Information
E11This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F60Word in reg. 27(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F61Words in reg. 27(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F62Reg. 27(3) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
27.—(1) The distributor must verify that the regulated non-automatic weighing instrument bears the CE marking and the M marking.
(2) The distributor must verify that the regulated non-automatic weighing instrument, it is accompanied by instructions and information easily understood by end users.
(3) Instructions and information supplied in accordance with this regulation must be in a language that is easily understood by end users and where those users are in [F168Northern Ireland] must be in English.
(4) The distributor must verify that the manufacturer and the importer have complied with the requirements set out in regulation 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.), regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) and regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments).
Extent Information
E48This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F168Words in reg. 27(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
28.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument is not in conformity with the essential requirements.
(2) Where this regulation applies, the distributor must not make the regulated non-automatic weighing instrument available on the market until it has been brought into conformity.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform—
(a)the manufacturer;
(b)the importer (where the distributor is not also the manufacturer or importer); and
(c)the market surveillance authority,
to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
29. A distributor must, in respect of regulated non-automatic weighing instruments under that distributor's responsibility, ensure that the conditions of their storage or transport are not such as to jeopardise their continuing compliance with the essential requirements.
30.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument [F63made available] on the market by that distributor is not in conformity with the requirements of these Regulations.
(2) Where this regulation applies, the distributor must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform the competent authority to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
Textual Amendments
F63Words in reg. 30(1) substituted (1.2.2019) by The Weights and Measures etc. (Miscellaneous) (Amendment) Regulations 2019 (S.I. 2019/5), regs. 1, 7(2)
31.—(1) The distributor must, further to a reasoned request from a competent authority, provide that authority with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the regulated non-automatic weighing instrument with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) A distributor must co-operate with a competent authority, at its request, as regards any action to eliminate the risks posed by any regulated non-automatic weighing instrument that the distributor has placed on the market.
32.—(1) Economic operators must, on request, identify to the market surveillance authorities—
(a)any economic operator who has supplied them with a regulated non-automatic weighing instrument; and
(b)any economic operator to whom they have supplied a regulated non-automatic weighing instrument.
(2) Economic operators must be able to present the information referred to in paragraph (1) for 10 years beginning with the day on which they have been supplied with the regulated non-automatic weighing instrument and for 10 years beginning with the day after the day on which they have supplied the instrument.
(3) The Secretary of State may impose a monetary penalty on an economic operator who fails to comply with an obligation imposed by this regulation.
(4) Schedule 5 has effect in relation to the imposition of a monetary penalty under paragraph (3).
32A.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive;
(b)“CE marking” has the meaning given to it in Article 2(19);
(c)“Module B” means the conformity assessment procedure set out in point 1 of Annex II;
(d)“EU-type examination certificate” means an EU-type examination certificate issued in accordance with Module B;
(e)“harmonised standard” has the meaning given to it in Article 2(11).
(2) Paragraph (3) applies where, before placing a non-automatic weighing instrument on the market, the manufacturer—
(a)ensures that the non-automatic weighing instrument has been designed and manufactured in accordance with the essential requirements set out in Annex I;
(b)ensures that the relevant conformity assessment procedures that apply to that non-automatic weighing instrument in accordance with Article 13 have been carried out;
(c)draws up the technical documentation referred to in Annex II;
(d)ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;
(e)affixes the CE marking and the supplementary metrology marking, in accordance with Articles 16 and 17(1) to (5);
(f)affixes the inscriptions provided for in points 1 or 2 of Annex III in accordance with Article 6(5);
(g)affixes where required in accordance with Article 6(5) the restrictive use symbol as provided for in Article 18 and in point 3 of Annex III;
(h)draws up an EU declaration of conformity, in accordance with Article 14; and
(i)ensures that the EU declaration of conformity is prepared in or translated into English.
(3) Where this paragraph applies—
(a)the requirements of regulations 6, 9(3) and (4), 41 and 45(2) are to be treated as being satisfied;
(b)regulations 7, 8(2), 44, 63(1)(a) to (e), 67, 68 and 71 apply subject to the modifications in paragraph (8); and
(c)Regulations 34 to 36 do not apply.
(4) Paragraph (5) applies where, before placing a regulated non-automatic weighing instrument on the market, the importer ensures that—
(a)the relevant conformity assessment procedure referred to in Article 13 has been carried out;
(b)the manufacturer has drawn up the technical documentation referred to in Annex II; and
(c)the non-automatic weighing instrument bears the CE marking and supplementary metrology marking in accordance with Articles 16 and 17(1) to (5).
(5) Where this paragraph applies—
(a)the requirements of regulation 16(2)(a) to (c) are to be treated as being satisfied; and
(b)regulations 23, 63(1)(a) to (e), 67 and 68 apply subject to the modifications in paragraph (8).
(6) Paragraph (7) applies where, before making a regulated non-automatic weighing instrument available on the market, a distributor ensures that the non-automatic weighing instrument bears the CE marking and the inscriptions referred to in point 1 of Annex III.
(7) Where this paragraph applies—
(a)regulation 27(1) is to be treated as being satisfied; and
(b)regulations 28(1), 28(2), 29, 63(1)(a), 63(1)(b), 67, 68 and 71 apply subject to the modifications in paragraph (8).
(8) The modifications referred to in sub-paragraphs (3)(b), (5)(b) and (7)(b) are that—
(a)any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity;
(b)any reference to “UK marking” is to be read as a reference to the CE marking;
(c)any reference to “designated standard” is to be read as a reference to a harmonised standard;
(d)any reference to “relevant conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedures referred to in Article 13;
(e)any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex II;
(f)any reference to “type examination certificate” is to be read as a reference to an EU-type examination certificate;
(g)any reference to “M marking” is to be read as a reference to the supplementary metrology marking;
(h)[F65except in relation to regulation 68,] any reference to “approved body” is to be read as a reference to the body that undertook any conformity assessment procedure in accordance with Article 13;
(i)any reference to “authorised mark” includes the CE marking and the supplementary metrology marking.]
Textual Amendments
F64Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F65Words in reg. 32A(8)(h) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(3)
32B.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive;
(b)“EU-type examination certificate” means an EU-type examination certificate issued in accordance with the conformity assessment procedure set out in point 1 of Annex II (Module B);
(c)any reference to “the first stage of the conformity assessment procedure” is a reference to one or both of the following—
(i)all examinations and tests which are not gravity dependent and which are included in the conformity assessment procedures set out in points 2 to 5 of Annex II;
(ii)the examinations and tests included in the conformity assessment procedures set out in points 2 to 5 of Annex II that may be carried out at the manufacturer's works or any other location where—
(aa)the transport of the instrument to its place of use requires dismantling of the instrument; or
(bb)the putting into service of the instrument in its place of use requires assembly of the instrument or other technical installation work that is likely to affect the instrument's performance.
(2) Paragraph (3) applies where, prior to the manufacture of a non-automatic weighing instrument the manufacturer has ensured that the conformity assessment procedure as set out in point 1 of Annex II (Module B) has been carried out.
(3) Where this paragraph applies—
(a)the reference in regulation 36(a) to “Module B as set out in point 1 of Schedule 7” is to be read as a reference to the conformity assessment procedure as set out in point 1 of Annex II (Module B); and
(b)regulations 6(b) and (c), 7, 16(2)(a) and (b), 63(1)(e), 67(2)(b), 68(4)(b) and paragraph 1 of Schedule 1 apply subject to the modifications in paragraph (6).
(4) Paragraph (5) applies where—
(a)in accordance with point 7.1 of Annex II, the procedures set out in points 2 to 5 of that Annex may be carried out in two stages; and
(b)the first stage of the conformity assessment procedure is carried out in accordance with any of the following points of Annex II—
(i)point 2 (Module D);
(ii)point 3 (Module D1);
(iii)point 4 (Module F); or
(iv)point 5 (Module F1).
(5) Where this paragraph applies—
(a)the reference in regulation 36(1)(a)(i) to “Module D as set out in point of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 2 of Annex II (Module D);
(b)the reference in regulation 36(1)(a)(ii) to “Module F as set out in point 4 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 4 of Annex II (Module F);
(c)the reference in regulation 36(3)(a) to “Module D1 as set out in point 3 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 3 of Annex II (Module D1);
(d)the reference in regulation 36(3)(b) to “Module F1 as set out in point 5 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 5 of Annex II (Module F1);
(e)regulations 6(b) and (c), 7, 16(2)(a) and (b), 45(6) and (7), 63(1)(c) and (e) and 67(1)(c) apply subject to the modifications in paragraph (6).
(6) The modifications referred to in paragraphs (3)(b) and (5)(e) are that—
(a)any reference to “relevant conformity assessment procedure” is to be read as including—
(i)where paragraph (3) applies, the conformity assessment procedure set out in point 1 of Annex II;
(ii)where paragraph (5) applies, the relevant first stage conformity assessment procedure;
(b)any reference to “type examination” is to be read as a reference to the EU-Type examination certificate;
(c)any reference to “technical documentation” is to be read as including the technical documentation required by points 1 to 5 of Annex II (as applicable);
(d)any reference to “approved body” is to be read as including the body which undertook the first stage conformity assessment procedure.]
Textual Amendments
F64Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
32C.—(1) Subject to [F66paragraphs (2) and (6)], regulation 32A ceases to have effect at the end of the period of [F67four years] beginning with IP completion day.
(2) Notwithstanding the expiry of regulation 32A—
(a)any non-automatic weighing instrument which was placed on the market pursuant to regulation 32A may continue to be made available on the market on or after the expiry of regulation 32A;
(b)any obligation to which a person was subject under regulation 32A in respect of any non-automatic weighing instrument placed on the market pursuant to regulation 32A continues to have effect after the expiry of regulation 32A, in respect of that instrument.
(3) Subject to [F68paragraphs (4) and (6)], regulation 32B ceases to have effect at the end of the period of [F69four years] beginning with IP completion day.
(4) Where a conformity assessment procedure has been completed pursuant to regulation 32B in relation to a non-automatic weighing instrument prior to the expiry of regulation 32B, regulation 32B continues to apply in respect of that instrument where—
(a)the manufacturer arranges for the EU-Type examination certificate and any annexes to be transferred to an approved body;
(b)the approved body referred to in sub-paragraph (a) accepts responsibility for the EU-Type examination certificate; and
(c)the approved body issues a Type-examination certificate relying, or relying in part, on any examinations or tests undertaken prior to the issue of the EU-Type examination certificate.
(5) In paragraph (4) “EU-Type examination certificate” has the meaning given to it in regulation 32B(1)(b).
[F70(6) regulations 67 and 68 continue to have effect in relation to any non-automatic weighing instrument—
(a)placed on the market pursuant to 32A; or
(b)in relation to which a manufacturer has undertaken a conformity assessment procedure in accordance with regulation 32B,
as if regulations 32A or 32B had not expired.]
Textual Amendments
F64Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F66Words in reg. 32C(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(a)
F67Words in reg. 32C(1) substituted (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 2, Sch. 1 para. (p)
F68Words in reg. 32C(3) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(b)
F69Words in reg. 32C(3) substituted (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 2, Sch. 1 para. (p)
F70Reg. 32C(6) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(c)
32D.—(1) Where paragraph (2) applies—
(a)a non-automatic weighing instrument is to be treated as being in conformity with the essential requirements; and
(b)each relevant economic operator is to be treated as having complied or as complying with the obligations imposed on them under Part 2.
(2) This paragraph applies where—
(a)a non-automatic weighing instrument is—
(i)in conformity with the essential requirements, within the meaning of that term in regulation 2, as it applies in Northern Ireland; and
(ii)qualifying Northern Ireland goods;
(b)each relevant economic operator has complied or is complying with the obligations imposed on them under Part 2, as that Part applies in Northern Ireland; and
(c)an importer has complied with the obligations set out in paragraph (3).
(3) The obligations referred to in paragraph (2)(c) are that, before placing the non-automatic weighing instrument on the market, the importer—
(a)complies with regulation 18;
(b)ensures that—
(i)the relevant conformity assessment procedure has been carried out in accordance with Part 3, as that Part applies in Northern Ireland;
(ii)the manufacturer has drawn up the technical documentation; and
(iii)the non-automatic weighing instrument bears the CE marking.
[F71(3A) After a non-automatic weighing instrument has been placed on the market pursuant to this regulation, regulations 67 and 68 are to be read in relation to that instrument subject to the following modifications—
(a)the reference in regulation 67(1)(a) to “UK marking” is to be read as a reference to the CE marking, within the meaning of regulation 2(1) as it applies in Northern Ireland;
(b)the reference in regulation 67(1)(b) to “M marking”, is to be read as a reference to the M Marking as defined in regulation 2(1), as it applies in Northern Ireland;
(c)the reference in regulation 67(1)(c) to “approved body” is to be read as a reference to a “notified body” as defined in regulation 2(1), as it applies in Northern Ireland;
(d)the references in regulations 67(2)(a) and 68(4)(a) to “essential requirements” are to be read as the essential requirements within the meaning of that term in regulation 2(1), as it applies in Northern Ireland; and
(e)the references in regulations 67(2)(b) and 68(4)(b) to “type examination certificate” is to be read as a reference to an EU-type examination certificate as defined in regulation 2(1), as it applies in Northern Ireland.]
(4) In this regulation—
“CE marking” has the meaning given to it in regulation 2(1), as it applies in Northern Ireland;
“qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018;
“technical documentation” has the meaning given to it in regulation 2(1), as it applies in Northern Ireland.]
Textual Amendments
F64Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F71Reg. 32D(3A) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(5)
33. This Chapter applies for the purposes of establishing whether a regulated non-automatic weighing instrument complies with the essential requirements.
34. Conformity with the essential requirements may be established in relation to a regulated non-automatic weighing instrument—
(a)through conformity with [F72designated] standards (or parts of those standards) covering the essential requirements F73...; or
(b)through the use by the manufacturer of any other technical solution that complies with the essential requirements.
Extent Information
E12This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F72Word in reg. 34(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 20(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F73Words in reg. 34(a) omitted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 20(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
34. Conformity with the essential requirements may be established in relation to a regulated non-automatic weighing instrument—
(a)through conformity with harmonised standards (or parts of those standards) covering the essential requirements where the harmonised standards have been published in the Official Journal of the European Union; or
(b)through the use by the manufacturer of any other technical solution that complies with the essential requirements.
Extent Information
E49This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
35. Regulated non-automatic weighing instruments which are in conformity with [F74designated] standards (or parts of those standards) shall be presumed to be in conformity with the essential requirements covered by those standards (or parts of those standards).
Extent Information
E13This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F74Word in reg. 35 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 21 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
35. Regulated non-automatic weighing instruments which are in conformity with harmonised standards (or parts of those standards) shall be presumed to be in conformity with the essential requirements covered by those standards (or parts of those standards).
Extent Information
E50This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
36.—(1) The conformity of regulated non-automatic weighing instruments to the essential requirements may, subject to paragraph (2), be established by either of the following conformity assessment procedures as selected by the manufacturer—
(a)Module B as set out in point 1 of [F75Schedule 7] followed by either—
(i)Module D as set out in point 2 of [F76Schedule 7]; or
(ii)Module F as set out in point 4 of [F77Schedule 7]; or
(b)Module G as set out in point 6 of [F78Schedule 7].
(2) Module B is compulsory for instruments—
(a)which use electronic devices; and
(b)the load measuring device of which uses a spring to balance the load.
(3) Where an instrument is not submitted to Module B, either of the following modules must be applied—
(a)Module D1 as set out in point 3 of [F79Schedule 7]; or
(b)Module F1 as set out in point 5 of [F80Schedule 7].
(4) [F81An approved] body must carry out the conformity assessment procedure selected by the manufacturer in accordance with the requirements of Schedule 2.
(5) The documents and correspondence relating to the conformity assessment procedures referred to in this regulation, and which are carried out in the United Kingdom, must be drawn up in English.
(6) In this regulation a reference to a module other than Module B includes the common provisions as set out in point 7 of [F82Schedule 7].
Extent Information
E14This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F75Words in reg. 36(1)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F76Words in reg. 36(1)(a)(i) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F77Words in reg. 36(1)(a)(ii) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F78Words in reg. 36(1)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F79Words in reg. 36(3)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F80Words in reg. 36(3)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F81Words in reg. 36(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F82Words in reg. 36(6) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 22(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
36.—(1) The conformity of regulated non-automatic weighing instruments to the essential requirements may, subject to paragraph (2), be established by either of the following conformity assessment procedures as selected by the manufacturer—
(a)Module B as set out in point 1 of Annex II to the Directive followed by either—
(i)Module D as set out in point 2 of Annex II; or
(ii)Module F as set out in point 4 of Annex II; or
(b)Module G as set out in point 6 of Annex II.
(2) Module B is compulsory for instruments—
(a)which use electronic devices; and
(b)the load measuring device of which uses a spring to balance the load.
(3) Where an instrument is not submitted to Module B, either of the following modules must be applied—
(a)Module D1 as set out in point 3 of Annex II; or
(b)Module F1 as set out in point 5 of Annex II.
(4) A notified body must carry out the conformity assessment procedure selected by the manufacturer in accordance with the requirements of Schedule 2.
(5) The documents and correspondence relating to the conformity assessment procedures referred to in this regulation, and which are carried out in the United Kingdom, must be drawn up in English.
(6) In this regulation a reference to a module other than Module B includes the common provisions as set out in point 7 of Annex II to the Directive.
Extent Information
E51This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
37.—(1) This regulation applies where—
(a)a notified body subcontracts specific conformity assessment activities, or
(b)has such activities carried out by a subsidiary.
(2) The activities are only to be treated as having been carried out by a notified body for the purposes of regulation 36 (conformity assessment procedures) where the conditions in paragraphs (3) and (4) are met.
(3) The notified body must—
(a)ensure that the subcontractor or subsidiary meets the notified body requirements; and
(b)inform the Secretary of State accordingly.
(4) The notified body must have obtained the agreement of the client to the use of a subcontractor or subsidiary.
(5) Where a notified body subcontracts specific conformity assessment activities, or has such activities carried out by a subsidiary, the notified body must for a period of at least 10 years beginning on the day after the activities are carried out, keep at the disposal of the Secretary of State the documentation concerning—
(a)the assessment of the qualifications of the subcontractor or the subsidiary; and
(b)the conformity assessment activities carried out by the subcontractor or subsidiary.
(6) When monitoring a notified body in accordance with regulation 52 (monitoring), the Secretary of State must treat the notified body as responsible for the tasks performed by a subcontractor or subsidiary, wherever the subcontractor or subsidiary is established.]
Textual Amendments
F83Reg. 37 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 23 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
38.—(1) [F84An approved] body may charge fees in connection with, or incidental to, the carrying out of conformity assessment procedures or specific tasks as it may determine.
(2) The fees referred to in paragraph (1) must not exceed the following—
(a)the costs incurred or to be incurred by the [F85approved] body in performing the relevant function; and
(b)an amount on account of profit which is reasonable in the circumstances having regard to—
(i)the character and extent of the work done or to be done by that notified body on behalf of the applicant; and
(ii)the commercial rate normally charged on account of profit for that work or similar work.
(3) The power in paragraph (1) includes the power to require payment of fees or a reasonable estimate of such fees in advance of carrying out the work requested by the applicant.
(4) Where any fees payable to [F84an approved] body pursuant to this regulation remain unpaid 28 days after either the work has been requested or payment of the fees has been requested in writing, whichever is the later, the notified body may by 14 days' notice in writing provide that, unless the fees are paid before the expiry of the notice, the certificate or notification appropriate to the relevant conformity assessment procedure may be suspended until payment of the fees has been received.
(5) This regulation does not apply to the Secretary of State.
Extent Information
E15This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F84Words in reg. 38 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 24(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F85Word in reg. 38(2)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 24(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
38.—(1) A United Kingdom notified body may charge fees in connection with, or incidental to, the carrying out of conformity assessment procedures or specific tasks as it may determine.
(2) The fees referred to in paragraph (1) must not exceed the following—
(a)the costs incurred or to be incurred by the United Kingdom notified body in performing the relevant function; and
(b)an amount on account of profit which is reasonable in the circumstances having regard to—
(i)the character and extent of the work done or to be done by that notified body on behalf of the applicant; and
(ii)the commercial rate normally charged on account of profit for that work or similar work.
(3) The power in paragraph (1) includes the power to require payment of fees or a reasonable estimate of such fees in advance of carrying out the work requested by the applicant.
(4) Where any fees payable to a United Kingdom notified body pursuant to this regulation remain unpaid 28 days after either the work has been requested or payment of the fees has been requested in writing, whichever is the later, the notified body may by 14 days' notice in writing provide that, unless the fees are paid before the expiry of the notice, the certificate or notification appropriate to the relevant conformity assessment procedure may be suspended until payment of the fees has been received.
(5) This regulation does not apply to the Secretary of State.
Extent Information
E52This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F86Word in Pt. 3 Ch. 2 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 25 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
39. This Chapter applies in relation to [F87EU] declarations of conformity made in relation to a regulated non-automatic weighing instrument for the purposes of these Regulations.
Textual Amendments
F87Word in reg. 39 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 25 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
40.—(1) The F89... declaration of conformity must—
(a)state that the fulfilment of the essential requirements has been demonstrated in relation to the regulated non-automatic weighing instrument;
(b)have the model structure set out in [F90Schedule 9]; and
(c)contain the elements specified in the relevant modules set out in [F91Schedule 7] and must be updated when appropriate.
(2) Where a regulated non-automatic weighing instrument is placed or made available on the market in the United Kingdom, the F92... declaration of conformity in relation to the instrument must be in English.
Extent Information
E16This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F88Word in reg. 40 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 26(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F89Word in reg. 40(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 26(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F90Words in reg. 40(1)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 26(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F91Words in reg. 40(1)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 26(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F92Word in reg. 40(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 26(d) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
40.—(1) The EU declaration of conformity must—
(a)state that the fulfilment of the essential requirements has been demonstrated in relation to the regulated non-automatic weighing instrument;
(b)have the model structure set out in Annex IV to the Directive; and
(c)contain the elements specified in the relevant modules set out in Annex II to the Directive and must be updated when appropriate.
(2) Where a regulated non-automatic weighing instrument is placed or made available on the market in [F169Northern Ireland], the EU declaration of conformity in relation to the instrument must be in English.
Extent Information
E53This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F169Words in reg. 40(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 4(1)
[F9341. Where a non-automatic weighing instrument is subject to more than one enactment requiring the drawing up of a declaration of conformity, the manufacturer must draw up a single declaration of conformity which identifies each enactment by its title.]
Extent Information
E17This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F93Reg. 41 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 27 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
41.—(1) This regulation applies where a regulated non-automatic weighing instrument is subject to [F170an NI Protocol obligation] for an EU declaration of conformity otherwise than by virtue of these Regulations.
(2) Where this regulation applies, a single EU declaration of conformity must be drawn up covering all applicable requirements which identifies the [F171relevant] Union acts concerned including their publication references.
Extent Information
E54This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F170Words in reg. 41(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 4(2)(a)
F171Word in reg. 41(2) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 4(2)(b)
42. A manufacturer, who draws up [F94a] declaration of conformity in relation to a regulated non-automatic weighing instrument, is responsible for compliance of that instrument with the requirements of these Regulations.
Extent Information
E18This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F94Word in reg. 42 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 28 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
42. A manufacturer, who draws up an EU declaration of conformity in relation to a regulated non-automatic weighing instrument, is responsible for compliance of that instrument with the requirements of these Regulations.
Extent Information
E55This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
43. The conformity of a regulated non-automatic weighing instrument with the requirements of these Regulations must be indicated by the presence on it of the [F97UK] marking and the M marking.
Extent Information
E19This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F95Word in reg. 43 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 29(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F96Word in reg. 43 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 29(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F97Word in reg. 43 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 29(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
43. The conformity of a regulated non-automatic weighing instrument with the requirements of these Regulations must be indicated by the presence on it of the CE marking and the M marking.
Extent Information
E56This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
44.—(1) An economic operator must not affix the UK marking or the M marking to a regulated non-automatic weighing instrument unless—
(a)that economic operator is the manufacturer of the non-automatic weighing instrument; and
(b)the conformity of the non-automatic weighing instrument with the essential requirements has been demonstrated by a conformity assessment procedure.
(2) An economic operator must not affix a marking to a regulated non-automatic weighing instrument which is not the UK marking or the M marking but which purports to attest that the non-automatic weighing instrument satisfies the essential requirements.
(3) An economic operator must not affix to a regulated non-automatic weighing instrument any other marking if the visibility, legibility and meaning of the UK marking or the M marking would be impaired as a result.]
Extent Information
E20This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F98Reg. 44 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 30 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
44. The general principles set out in article 30 of RAMS apply to the M marking with such modifications as are necessary in the circumstances.
Extent Information
E57This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
45.—(1) The [F100UK] marking and M marking (“the markings”) must be affixed to a regulated non-automatic weighing instrument in accordance with the provisions of this regulation.
(2) The markings must be affixed visibly, legibly and indelibly to the regulated non-automatic weighing instrument [F101, its data plate, or where regulation 6(2) applies in respect of the UK marking, to a label affixed to the regulated non-automatic weighing instrument, or to a document accompanying the regulated non-automatic weighing instrument].
(3) The markings must be affixed before the regulated non-automatic weighing instrument is placed on the market.
(4) The M marking must immediately follow the [F102UK] marking.
(5) The markings must immediately be followed by the identification of the [F103approved] body where that body is involved in the production control phase as set out in [F104Schedule 7].
(6) The identification number of the [F105approved] body which carried out the conformity assessment procedure must be affixed by the body itself, or under its instructions by the manufacturer or the manufacturer's authorised representative.
(7) The markings and the identification number of the [F106approved] body may be followed by any other mark indicating a special risk or use.
Extent Information
E21This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F99Word in reg. 45 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F100Word in reg. 45(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F101Words in reg. 45(2) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 31(ab) (as inserted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(5))
F102Word in reg. 45(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F103Word in reg. 45(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F104Words in reg. 45(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F105Word in reg. 45(6) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F106Word in reg. 45(7) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
45.—(1) The CE marking and M marking (“the markings”) must be affixed to a regulated non-automatic weighing instrument in accordance with the provisions of this regulation.
(2) The markings must be affixed visibly, legibly and indelibly to the regulated non-automatic weighing instrument or its data plate.
(3) The markings must be affixed before the regulated non-automatic weighing instrument is placed on the market.
(4) The M marking must immediately follow the CE marking.
(5) The markings must immediately be followed by the identification of the notified body where that body is involved in the production control phase as set out in Annex II to the Directive.
(6) The identification number of the notified body which carried out the conformity assessment procedure must be affixed by the body itself, or under its instructions by the manufacturer or the manufacturer's authorised representative.
(7) The markings and the identification number of the notified body may be followed by any other mark indicating a special risk or use.
Extent Information
E58This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
45A.—(1) Where the CE marking is affixed on the basis of an assessment or a certificate issued by a notified body established in the United Kingdom, a UK(NI) indication must be affixed in relation to the regulated non-automatic weighing instrument, in accordance with this regulation.
(2) The UK(NI) indication must be affixed—
(a)visibly, legibly and indelibly; and
(b)before the regulated non-automatic weighing instrument is placed on the market in Northern Ireland.
(3) The UK(NI) indication must accompany the CE marking, wherever that is affixed in accordance with regulation 45.
(4) The UK(NI) indication must be affixed by—
(a)the manufacturer; or
(b)the manufacturer's authorised representative.
(5) When placing a regulated non-automatic weighing instrument on the market in Northern Ireland, an importer must ensure that the manufacturer has complied with their obligations under this regulation.]
Textual Amendments
45B.—(1) The Secretary of State must ensure that—
(a)each notified body established in the United Kingdom is assigned an identification number; and
(b)there is a register of—
(i)notified bodies established in the United Kingdom;
(ii)their notified body identification number;
(iii)the activities for which they have been notified;
(iv)any restrictions on those activities.
(2) The Secretary of State must ensure that the register referred to in paragraph (1) is maintained and made publicly available.
(3) The Secretary of State may authorise the United Kingdom Accreditation Service to compile and maintain the register in accordance with paragraph (1)(b).]
Textual Amendments
46.—(1) This regulation applies to a non-automatic weighing instrument which is not a regulated non-automatic weighing instrument.
(2) A manufacturer must not place on the market a non-automatic weighing instrument to which this regulation applies unless it is marked legibly and indelibly with the following information—
(a)the manufacturer's name, registered trade name or registered trade mark; and
(b)the maximum capacity of the instrument, in the form “Max…..”.
(c)the postal address at which they can be contacted, indicating a single point of contact.
(3) Before placing on the market a non-automatic weighing instrument to which this regulation applies, an importer must ensure that—
(a)the manufacturer has marked the instrument in the manner referred to in paragraph (2) with the information referred to in that paragraph;
(b)the importer has indicated on the instrument their name or registered trade mark and the postal address at which they can be contacted.
(4) Where compliance with paragraph (3)(b) would require the packaging to be opened, the information required by that paragraph may be given on the packaging and in a document accompanying the non-automatic weighing instrument.
(5) Before making available on the market a non-automatic weighing instrument to which this regulation applies, a distributor must verify that—
(a)the manufacturer has marked the instrument in the manner referred to in paragraph (2) with the information referred to in that paragraph;
(b)the importer of the instrument has complied with paragraph (3).
Textual Amendments
F108Pt. 5 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 32 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/852, reg. 4(2), Sch. 1 paras. 1(o)(v), (vi)); 2020 c. 1, Sch. 5 para. 1(1)
47.—(1) An approved body is a conformity assessment body which—
(a)has been approved by the Secretary of State pursuant to the procedure set out in regulation 48 (approval of conformity assessment bodies); or
(b)immediately before IP completion day was a notified body in respect of which the Secretary of State had taken no action under regulation 54(1) or (2) as they had effect immediately before IP completion day to suspend or withdraw the body's status as a notified body.
(2) Paragraph (1) has effect subject to regulation 51 (restriction, suspension or withdrawal of approval).
(3) In this Part—
“notified body” means a body—
which the Secretary of State had before IP completion day notified to the European Commission and the member State of the European Union, in accordance with Article 27 of the Directive; and
in respect of which no objections had been raised, as referred to in regulation 47(2)(b), as it had effect immediately before IP completion day;
“approved body requirements” means the requirements set out in Schedule 3.]
Extent Information
E22This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
47.—(1) This Part applies to the notification to the Commission and other [F172relevant] states of the bodies authorised to carry out conformity assessment procedures in the United Kingdom in relation to regulated non-automatic weighing instruments.
(2) For the purposes of this Part, a notified body is a conformity assessment body—
(a)which has been notified to the Commission and to other [F172relevant] states in accordance with the Directive; and
(b)in respect of which no objections [F173, other than an immaterial objection,] are raised by the Commission or other [F172relevant] states—
(i)within 2 weeks of a notification, where an accreditation certificate is used; or
(ii)within 2 months of a notification, where accreditation is not [F174used;]
[F175(c)in sub-paragraph (b), an “immaterial objection” is an objection on the grounds that—
(i)the conformity assessment body is established in the United Kingdom; or
(ii)the accreditation certificate was issued by the United Kingdom Accreditation Service.]
(3) Paragraph (2) has effect subject to regulation 54 (changes to notifications).
Extent Information
E59This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F172Word in reg. 47 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(1)(a)
F173Words in reg. 47(2)(b) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(1)(b)(i)
F174Word in reg. 47(2)(b) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(1)(b)(ii)
48.—(1) The Secretary of State may approve only those conformity assessment bodies that qualify for approval.
(2) A conformity assessment body qualifies for approval if the first and second conditions below are met.
(3) The first condition is that the conformity assessment body has applied to the Secretary of State to become an approved body and that application is accompanied by—
(a)a description of—
(i)the conformity assessment activities that the conformity assessment body intends to carry out;
(ii)the conformity assessment procedure in respect of which the conformity assessment body claims to be competent;
(iii)the class of regulated non-automatic weighing instruments in respect of which the conformity assessment body claims to be competent; and
(b)either—
(i)an accreditation certificate; or
(ii)the documentary evidence necessary for the Secretary of State to verify, recognise and regularly monitor the conformity assessment body's compliance with the approved body requirements.
(4) The second condition is that the Secretary of State is satisfied that the conformity assessment body meets the approved body requirements.
(5) For the purposes of paragraph (4), the Secretary of State may accept an accreditation certificate, provided in accordance with paragraph (3)(b)(i), as sufficient evidence that the conformity assessment body meets the approved body requirements.
(6) When deciding whether to approve a conformity assessment body that qualifies for approval, the Secretary of State may—
(a)have regard to any other matter which appears to the Secretary of State to be relevant; and
(b)set conditions that the conformity assessment body must meet.
(7) For the purposes of this regulation “accreditation certificate” means a certificate, issued by the UK national accreditation body, attesting that a conformity assessment body meets the approved body requirements.]
Extent Information
E23This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
48.—(1) The notifying authority for the purposes of these Regulations is the Secretary of State.
(2) The functions of the notifying authority are—
(a)to assess whether applicants for recognition as conformity assessment bodies meet the requirements for recognition as such;
(b)where an assessment that a body is qualified to act as a conformity assessment body is made, to notify the Commission of that fact; and
(c)to carry out such monitoring of bodies notified to the Commission to ensure continuing compliance with the requirements of these Regulations.
(3) The notifying authority may delegate the performance of its functions to a body that meets the requirements of Articles 20(3) and 21 of the Directive but in the event of such a delegation the notifying authority remains fully responsible for the performance of those functions.
(4) The notifying authority must supply such information as the Commission may request in relation to a body notified by it.
Extent Information
E60This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
49.—(1) Where a conformity assessment body demonstrates its conformity with the criteria laid down in a designated standard (or part of such standard), the Secretary of State is to presume that the conformity assessment body meets the approved body requirements covered by that standard (or that part of that standard).
(2) The presumption in paragraph (1) is rebuttable.]
Extent Information
E24This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
49.—(1) The Secretary of State may notify to the Commission and the other [F176relevant] states only those conformity assessment bodies that qualify for notification.
(2) A conformity assessment body qualifies for notification if the first and the second conditions below are met.
(3) The first condition is that the conformity assessment body makes an application to the Secretary of State for notification and that application is accompanied by—
(a)a description of—
(i)the conformity assessment activities that the conformity assessment body intends to carry out;
(ii)the conformity assessment module for which the conformity assessment body claims to be competent; and
(iii)the regulated non-automatic weighing instrument in respect of which the conformity assessment body claims to be competent; and
(b)an accreditation certificate or the documentary evidence necessary for the Secretary of State to verify, recognise and regularly monitor the conformity assessment body's compliance with the notified body requirements.
(4) The second condition is that the Secretary of State is satisfied that the conformity assessment body meets the requirements of Schedule 3 (“the notified body requirements”).
(5) For the purposes of paragraph (4), the Secretary of State may accept an accreditation certificate, provided in accordance with paragraph (3)(b), as sufficient evidence that the conformity assessment body meets the notified body requirements.
(6) When deciding whether to notify a conformity assessment body that qualifies for notification to the Commission and the other [F177relevant states], the Secretary of State may—
(a)have regard to any other matter which appears to the Secretary of State to be relevant; and
(b)set conditions that the conformity assessment body must meet.
(7) The Secretary of State must inform the Commission of the United Kingdom's procedures for the assessment and notification of conformity assessment bodies, and any changes to those procedures.
Extent Information
E61This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F176Word in reg. 49(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(2)(a)
F177Words in reg. 49(6) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(2)(b)
50. The Secretary of State must monitor each approved body with a view to verifying that the body—
(a)continues to meet the approved body requirements;
(b)meets any conditions set—
(i)in accordance with regulation 48(6)(b); or
(ii)in the case of an approved body which was a notified body immediately before IP completion day, in accordance with regulation 48(6)(b), as it applied immediately before IP completion day; and
(c)carries out its functions in accordance with these Regulations.]
Extent Information
E25This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
50.—(1) Where a conformity assessment body demonstrates its conformity with the criteria laid down in a harmonised standard (or part of such a standard), the reference of which has been published in the Official Journal of the European Union, the Secretary of State is to presume that the conformity assessment body meets the notified body requirements covered by that standard (or part of that standard).
(2) The presumption in paragraph (1) is rebuttable.
Extent Information
E62This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
51.—(1) Where the Secretary of State determines that an approved body—
(a)no longer meets an approved body requirement, or
(b)is failing to fulfil its obligations under these Regulations, other than a condition referred to in regulation 50(b),
the Secretary of State must restrict, suspend or withdraw the body's status as an approved body under regulation 48 (approval of conformity assessment bodies).
(2) With the consent of an approved body, or where the Secretary of State determines that an approved body no longer meets a condition in accordance with regulation 50(b), the Secretary of State may restrict, suspend or withdraw the body's status as an approved body under regulation 48 (approval of conformity assessment bodies).
(3) In deciding what action is required under paragraph (1) or (2), the Secretary of State must have regard to the seriousness of the failure.
(4) Before taking action under paragraph (1) or (2), the Secretary of State must—
(a)give notice in writing to the approved body of the proposed action and the reasons for it;
(b)give the approved body an opportunity to make representations to the Secretary of State regarding the proposed action within a reasonable period from the date of that notice; and
(c)consider any such representations made by the approved body.
(5) Where the Secretary of State has taken action in respect of an approved body under paragraph (1) or (2), or where an approved body has ceased its activity, the approved body must—
(a)on the request of the Secretary of State, transfer its files to another approved body or to the Secretary of State; or
(b)in the absence of a request under sub-paragraph (a), ensure that its files relating to the activities it has undertaken as an approved body are kept available for the Secretary of State and competent authorities for a period of 10 years from the date they were created.
(6) The activities undertaken as an approved body referred to in paragraph (5) include any activities that the body has undertaken as a notified body.
(7) The Secretary of State may impose a monetary penalty on an approved body that fails to comply with any requirement imposed by or under paragraph (5).
(8) Schedule 5 has effect in relation to monetary penalties imposed under paragraph (7).]
Extent Information
E26This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
51. A notification under regulation 49 (notification) must include—
(a)details of—
(i)the conformity assessment activities in respect of which the conformity assessment body has made its application for notification;
(ii)the conformity assessment module in respect of which the conformity assessment body has made its application for notification;
(iii)the regulated non-automatic weighing instrument in respect of which the conformity assessment body has made its application for notification; and
(b)either or both of the following—
(i)an accreditation certificate; or
(ii)documentary evidence which attests to—
(aa)the conformity assessment body's competence; and
(bb)the arrangements in place to ensure that the conformity assessment body will be monitored regularly and will continue to meet the notified body requirements.
Extent Information
E63This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
52.—(1) An approved body may subcontract specific conformity assessment activities, or use a subsidiary to carry out such activities provided—
(a)the body is satisfied that the subcontractor or subsidiary meets the approved body requirements;
(b)the body has informed the Secretary of State that it is satisfied that the subcontractor or subsidiary meets those requirements; and
(c)the economic operator for whom the activities are to be carried out has consented to the activities being carried out by that person.
(2) The approved body which subcontracts specific conformity assessment activities or uses a subsidiary to carry out such activities remains responsible for the proper performance of those activities (irrespective of where the subcontractor or subsidiary is established).
(3) Where an approved body subcontracts, or uses a subsidiary to carry out, a specific conformity assessment activity, the approved body must, for a period of 10 years beginning on the day on which the activity is first carried out, keep available for inspection by the Secretary of State all relevant documentation concerning—
(a)the assessment of the qualifications of the subcontractor or the subsidiary; and
(b)the conformity assessment activity carried out by the subcontractor or subsidiary.
(4) In this regulation “subsidiary” has the meaning given to it in section 1159 of the Companies Act 2006 F109.]
Extent Information
E27This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
52.—(1) The Secretary of State must monitor each notified body with a view to verifying that the notified body—
(a)continues to meet the notified body requirements;
(b)meets any conditions set in accordance with regulation 49(6)(b) ; and
(c)carries out its functions in accordance with these Regulations.
(2) The Secretary of State must inform the Commission of the United Kingdom's procedures for the monitoring of notified bodies, and any changes to those procedures.
Extent Information
E64This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
53.—(1) The Secretary of State must—
(a)assign an approved body identification number to each approved body; and
(b)compile and maintain a register of—
(i)approved bodies;
(ii)their approved body identification numbers;
(iii)the activities for which they have been approved; and
(iv)any restrictions on those activities.
(2) The register referred to in paragraph (1) must be made publicly available.]
Extent Information
E28This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
53.—(1) The Secretary of State may authorise the United Kingdom Accreditation Service to carry out the following activities on behalf of the Secretary of State—
(a)assessing whether a conformity assessment body meets the notified body requirements; and
(b)monitoring notified bodies.
(2) Where the Secretary of State authorises the United Kingdom Accreditation Service pursuant to paragraph (1), the Secretary of State remains fully responsible for anything done pursuant to that authorisation.
Extent Information
E65This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
54.—(1) The Secretary of State may authorise the UK national accreditation body to carry out the following activities on behalf of the Secretary of State—
(a)assessing whether a conformity assessment body meets the approved body requirements; and
(b)monitoring approved bodies in accordance with regulation 50.
(2) Where the Secretary of State authorises the UK national accreditation body pursuant to paragraph (1), the Secretary of State remains fully responsible for anything done pursuant to that authorisation.]
Extent Information
E29This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
54.—(1) Where the Secretary of State determines that a notified body no longer meets a notified body requirement, or that it is failing to fulfil any of its obligations under these Regulations other than conditions set in accordance with regulation 49(6)(b), the Secretary of State must restrict, suspend or withdraw the body's status as a notified body under regulation 49 (notification).
(2) With the consent of a notified body, or where the Secretary of State determines that a notified body no longer meets a condition set in accordance with regulation 49(6)(b), the Secretary of State may restrict, suspend or withdraw the body's status as a notified body under regulation 49 (notification).
(3) In deciding what action is required under paragraph (1) or (2), the Secretary of State must have regard to the seriousness of the failure.
(4) Before taking action under paragraph (1) or (2), the Secretary of State must—
(a)give notice in writing that the Secretary of State intends to take such action and the reasons for taking such action; and
(b)give the notified body an opportunity to make representations within a reasonable period from the date of that notice and consider any such representations.
(5) Where the Secretary of State takes action under paragraph (1) or (2), the Secretary of State must immediately inform the Commission and the other [F178relevant] states.
(6) Where the Secretary of State has taken action in respect of a notified body under paragraph (1) or (2), or where a notified body has ceased its activity, the body must—
(a)on the request of the Secretary of State, transfer its files to another notified body or to the Secretary of State; or
(b)in the absence of a request under sub-paragraph (a), ensure that its files are kept available for the Secretary of State and each enforcing authority for such period as the Secretary of State may specify.
(7) The Secretary of State may impose a monetary penalty on a United Kingdom notified body that fails to comply with any requirement imposed by or under paragraph (6).
(8) Schedule 5 has effect in relation to monetary penalties imposed under paragraph (7).
Extent Information
E66This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F178Word in reg. 54(5) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 5(3)
55. No person shall put into service a regulated non-automatic weighing instrument for any of the uses listed in regulation 3(2) or have such an instrument in his possession for such use unless prior to placing the instrument on the market it has been established by the application of the appropriate conformity assessment procedure that the essential requirements are met in relation to the instrument.
56. Schedule 4 applies to the use for trade of regulated non-automatic weighing instruments in Great Britain.
57. The Secretary of State is the market surveillance authority for the purposes of these Regulations and RAMS.
58.—(1) This regulation applies where the market surveillance authority has sufficient reason to believe that a regulated non-automatic weighing instrument presents a risk in relation to any of the purposes set out in regulation 3(2).
(2) Where this regulation applies the market surveillance authority must carry out an evaluation of the regulated non-automatic weighing instrument covering all relevant requirements of these Regulations which apply to that instrument.
(3) The relevant economic operators in relation to the non-automatic weighing instrument must co-operate as necessary with the market surveillance authority for that purpose.
(4) Where, in the course of the evaluation referred to in paragraph (2), the market surveillance authority finds that that the regulated non-automatic weighing instrument does not comply with the essential requirements applicable to it, it must without delay issue a direction which requires the relevant economic operator to—
(a)take all appropriate corrective actions;
(b)withdraw the regulated non-automatic weighing instrument from the market; or
(c)recall it within a reasonable period commensurate with the nature of the risk.
(5) Where the market surveillance authority acts under paragraph (4) it must without delay inform the [F110approved] body that carried out the conformity assessment procedure in respect of the regulated non-automatic weighing instrument of—
(a)the respect in which the regulated non-automatic weighing instrument is not in conformity with the requirements of these Regulations; and
(b)the actions that the authority is requiring the relevant economic operator to take.
F111(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(7) The economic operator must ensure that all appropriate corrective action is taken in respect of all the regulated non-automatic weighing instruments concerned that it has made available [F112in the United Kingdom].
(8) Where the relevant economic operator does not take adequate corrective action within a reasonable period, the market surveillance authority must take all provisional measures to prohibit or restrict the regulated non-automatic weighing instrument being made available on the market, to withdraw the instrument from that market or to recall it.
(9) Where the market surveillance authority takes measures under paragraph (8), the market surveillance authority must notify the [F113Secretary of State] of those measures without delay.
(10) A notification under paragraph (9) must include all available details, in particular—
(a)the data necessary for the identification of the non-compliant regulated measuring instrument;
(b)the origin of the instrument;
(c)the nature of the non-compliance alleged and the risk involved;
(d)the nature and duration of the measures taken;
(e)the arguments put forward by the relevant economic operator; and
(f)whether the non-compliance is due to either of the following—
(i)failure of the regulated measuring instrument to meet the requirements relating to a risk; or
(ii)shortcomings in the [F114designated] standards referred to in regulation 34(a).
Extent Information
E30This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F110Word in reg. 58(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 33(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F111Reg. 58(6) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 33(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F112Words in reg. 58(7) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 33(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F113Words in reg. 58(9) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 33(d) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F114Word in reg. 58(10)(f)(ii) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 33(e) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
58.—(1) This regulation applies where the market surveillance authority has sufficient reason to believe that a regulated non-automatic weighing instrument presents a risk in relation to any of the purposes set out in regulation 3(2).
(2) Where this regulation applies the market surveillance authority must carry out an evaluation of the regulated non-automatic weighing instrument covering all relevant requirements of these Regulations which apply to that instrument.
(3) The relevant economic operators in relation to the non-automatic weighing instrument must co-operate as necessary with the market surveillance authority for that purpose.
(4) Where, in the course of the evaluation referred to in paragraph (2), the market surveillance authority finds that that the regulated non-automatic weighing instrument does not comply with the essential requirements applicable to it, it must without delay issue a direction which requires the relevant economic operator to—
(a)take all appropriate corrective actions;
(b)withdraw the regulated non-automatic weighing instrument from the market [F179in Northern Ireland]; or
(c)recall it within a reasonable period commensurate with the nature of the risk.
(5) Where the market surveillance authority acts under paragraph (4) it must without delay inform the notified body that carried out the conformity assessment procedure in respect of the regulated non-automatic weighing instrument of—
(a)the respect in which the regulated non-automatic weighing instrument is not in conformity with the requirements of these Regulations; and
(b)the actions that the authority is requiring the relevant economic operator to take.
(6) [F180Subject to paragraph (6A),] where the market surveillance authority considers that non-compliance is not restricted to [F181Northern Ireland], it must inform the Commission and the other [F182relevant] states of the results of the evaluation and of the actions which they have required the economic operator to take.
[F183(6A) Paragraph (6) does not require the Secretary of State to inform the Commission or the other relevant states where the non-compliance extends only to any of England or Wales or Scotland.]
(7) The economic operator must ensure that all appropriate corrective action is taken in respect of all the regulated non-automatic weighing instruments concerned that it has made available on the market throughout [F184Northern Ireland].
(8) Where the relevant economic operator does not take adequate corrective action within a reasonable period, the market surveillance authority must take all provisional measures to prohibit or restrict the regulated non-automatic weighing instrument being made available on the market [F185in Northern Ireland], to withdraw the instrument from that market or to recall it.
(9) Where the market surveillance authority takes measures under paragraph (8), the market surveillance authority must notify the Commission and the other [F186relevant] states of those measures without delay.
(10) A notification under paragraph (9) must include all available details, in particular—
(a)the data necessary for the identification of the non-compliant regulated measuring instrument;
(b)the origin of the instrument;
(c)the nature of the non-compliance alleged and the risk involved;
(d)the nature and duration of the measures taken;
(e)the arguments put forward by the relevant economic operator; and
(f)whether the non-compliance is due to either of the following—
(i)failure of the regulated measuring instrument to meet the requirements relating to a risk; or
(ii)shortcomings in the harmonised standards referred to in regulation 34(a).
Extent Information
E67This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F179Words in reg. 58(4)(b) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(a)
F180Words in reg. 58(6) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(b)(i)
F181Words in reg. 58(6) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(b)(ii)
F182Word in reg. 58(6) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(b)(iii)
F183Reg. 58(6A) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(c)
F184Words in reg. 58(7) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(d)
F185Words in reg. 58(8) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(e)
F186Word in reg. 58(9) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(1)(f)
59.—(1) Where another [F116relevant] state has initiated the procedure under Article 37 of the Directive, the market surveillance authority must without delay, inform the Commission and the other [F116relevant] states of—
(a)any measures taken by competent authority in respect of the regulated non-automatic weighing instrument;
(b)any additional information which the market surveillance authority has at its disposal relating to the lack of conformity of the regulated non-automatic weighing [F117instrument.]
F118(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(2) Where a measure taken by another [F119relevant] state in respect of a regulated non-automatic weighing instrument is considered justified under Article 37(7) of the Directive, the market surveillance authority must ensure that appropriate measures to withdraw the instrument are taken in respect of the regulated non-automatic weighing instrument without delay.
(3) If, pursuant to Article 38 of the Directive, the Commission considers a direction given pursuant to regulation 58(4) is unjustified, the market surveillance authority must forthwith withdraw it and notify other competent authorities and economic operators affected accordingly.]
Textual Amendments
F115Reg. 59 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 34 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F116Word in reg. 59(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(2)(a)(i)
F117Word in reg. 59(1)(b) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(2)(a)(ii)
F118Reg. 59(1)(c) omitted (N.I.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(2)(a)(iii)
F119Word in reg. 59(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(2)(b)
60.—(1) This regulation applies where, having carried out an evaluation under regulation 58 (regulated non-automatic weighing instruments presenting a risk), the market surveillance authority finds that although a regulated non-automatic weighing instrument is in compliance with the requirements of these Regulations, it presents a risk in relation to its use in relation to any activity referred to in regulation 3(2).
(2) Where this regulation applies, the market surveillance authority must issue a direction requiring the economic operator to—
(a)take all appropriate measures to ensure that the non-automatic weighing instrument concerned, when placed on the market, no longer presents that risk;
(b)withdraw the non-automatic weighing instrument from the market; or
(c)recall it within a reasonable period, commensurate with the nature of the risk as it may prescribe.
(3) Where this regulation applies, the market surveillance authority must immediately inform the [F120Secretary of State] of all available details including—
(a)the data necessary for the identification of the regulated non-automatic weighing instrument concerned;
(b)the origin and supply chain of the regulated non-automatic weighing instrument;
(c)the nature of the risk involved; and
(d)the nature and duration of the national measures taken.
Extent Information
E31This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F120Words in reg. 60(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 35 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
60.—(1) This regulation applies where, having carried out an evaluation under regulation 58 (regulated non-automatic weighing instruments presenting a risk), the market surveillance authority finds that although a regulated non-automatic weighing instrument is in compliance with the requirements of these Regulations, it presents a risk in relation to its use in relation to any activity referred to in regulation 3(2).
(2) Where this regulation applies, the market surveillance authority must issue a direction requiring the economic operator to—
(a)take all appropriate measures to ensure that the non-automatic weighing instrument concerned, when placed on the market [F187in Northern Ireland], no longer presents that risk;
(b)withdraw the non-automatic weighing instrument from the market [F188in Northern Ireland]; or
(c)recall it within a reasonable period, commensurate with the nature of the risk as it may prescribe.
(3) Where this regulation applies, the market surveillance authority must immediately inform the Commission and the other [F189relevant] states of all available details including—
(a)the data necessary for the identification of the regulated non-automatic weighing instrument concerned;
(b)the origin and supply chain of the regulated non-automatic weighing instrument;
(c)the nature of the risk involved; and
(d)the nature and duration of the national measures taken.
Extent Information
E68This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F187Words in reg. 60(2)(a) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(3)(a)(i)
F188Words in reg. 60(2)(b) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(3)(a)(ii)
F189Word in reg. 60(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(3)(b)
61.—(1) This regulation applies in relation to directions given under regulations 58 (regulated non-automatic weighing instruments presenting a risk) and 60 (compliant regulated non-automatic weighing instruments which present a risk).
(2) A direction must—
(a)be in writing;
(b)describe the regulated non-automatic weighing instrument to which it relates in a manner sufficient to identify that instrument;
(c)specify the risk identified by the market surveillance authority; and
(d)specify the steps that the economic operator must take (including the time period within which they must be taken).
(3) The Secretary of State may impose a monetary penalty on an economic operator who fails to comply with a direction given under regulation 58 or 60.
(4) Schedule 5 has effect in relation to monetary penalties imposed under paragraph (3).
62.—(1) In Great Britain, it is the duty of every local weights and measures authority to enforce these Regulations within its area.
(2) In Northern Ireland, it is the duty of the Department for the Economy to enforce these Regulations (other than Part 7).
(3) The Secretary of State—
(a)must enforce these Regulations when required to do so in the capacity of the market surveillance authority; and
(b)may otherwise than in the capacity of market surveillance authority enforce these Regulations and for that purpose may appoint any person to act on his behalf.
(4) No proceedings for an offence under these Regulations may be instituted in England and Wales except by or on behalf of a competent authority.
(5) Nothing in these Regulations authorises a competent authority to bring proceedings in Scotland for an offence.
(6) No proceedings shall be instituted in Northern Ireland for an offence under these Regulations in respect of a regulated non-automatic weighing instrument except—
(a)by or on behalf of a competent authority which has responsibility for enforcing these Regulations in respect of that regulated non-automatic weighing instrument; or
(b)the Director of Public Prosecutions for Northern Ireland.
63.—(1) This regulation applies where a competent authority has reasonable grounds for considering that one or more of the following breaches applies in relation to a regulated non-automatic weighing instrument that has been placed on the market—
(a)the [F121UK] marking or the M marking has been affixed in violation of [F122regulation 44 or regulation 45];
(b)the [F123UK] marking or the M marking has not been affixed;
(c)the identification number of the [F124approved] body, where the body is involved in the production control phase has—
(i)been affixed otherwise than in accordance with the requirements of these Regulations; or
(ii)not been affixed;
(d)the F125... declaration of conformity has not been drawn up correctly;
(e)the technical documentation is either not available or is not complete;
(f)the information referred to in regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) or regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments) is absent, false or incomplete; or
(g)any other failure—
(i)by a manufacturer to comply with the requirements of Chapter 1 of Part 2; or
(ii)by an importer to comply with the requirements of Chapter 2 of Part 2.
(2) The competent authority may serve a notice in writing (“a compliance notice”) on the economic operator it considers is responsible for the breach which must—
(a)describe the regulated non-automatic weighing instrument to which it relates in a manner sufficient to identify that instrument;
(b)specify which of the circumstances in paragraph (1) applies in relation to the regulated non-automatic weighing instrument;
(c)require the economic operator on whom the notice is served to take steps specified in the notice to remedy the matters referred to in sub-paragraph (b);
(d)specify the date, being not less than 21 days from the date of the notice, by which the steps specified in it must be taken; and
(e)warn that person that, where the non-conformity continues beyond the date specified in sub-paragraph (d), the competent authority may take further action under regulation 64 (enforcement notice procedure) in respect of that regulated non-automatic weighing instrument.
(3) Where a compliance notice is served by a competent authority other than the Secretary of State, it must, at the same time as it serves that notice, send a copy to the Secretary of State.
Extent Information
E32This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F121Word in reg. 63(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 36(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F122Words in reg. 63(1)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 36(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F123Word in reg. 63(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 36(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F124Word in reg. 63(1)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 36(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F125Word in reg. 63(1)(d) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 36(d) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
63.—(1) This regulation applies where a competent authority has reasonable grounds for considering that one or more of the following breaches applies in relation to a regulated non-automatic weighing instrument that has been placed on the market—
(a)the CE marking or the M marking has been affixed in violation of Article 30 of the RAMS Regulation or the requirements of these Regulations;
(b)the CE marking or the M marking has not been affixed;
(c)the identification number of the notified body, where the body is involved in the production control phase has—
(i)been affixed otherwise than in accordance with the requirements of these Regulations; or
(ii)not been affixed;
[F190(ca)the UK(NI) indication—
(i)has not been affixed, in contravention of regulation 45A; or
(ii)has been affixed other than in accordance with regulation 45A;]
(d)the EU declaration of conformity has not been drawn up correctly;
(e)the technical documentation is either not available or is not complete;
(f)the information referred to in regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) or regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments) is absent, false or incomplete; or
(g)any other failure—
(i)by a manufacturer to comply with the requirements of Chapter 1 of Part 2; or
(ii)by an importer to comply with the requirements of Chapter 2 of Part 2.
(2) The competent authority may serve a notice in writing (“a compliance notice”) on the economic operator it considers is responsible for the breach which must—
(a)describe the regulated non-automatic weighing instrument to which it relates in a manner sufficient to identify that instrument;
(b)specify which of the circumstances in paragraph (1) applies in relation to the regulated non-automatic weighing instrument;
(c)require the economic operator on whom the notice is served to take steps specified in the notice to remedy the matters referred to in sub-paragraph (b);
(d)specify the date, being not less than 21 days from the date of the notice, by which the steps specified in it must be taken; and
(e)warn that person that, where the non-conformity continues beyond the date specified in sub-paragraph (d), the competent authority may take further action under regulation 64 (enforcement notice procedure) in respect of that regulated non-automatic weighing instrument.
(3) Where a compliance notice is served by a competent authority other than the Secretary of State, it must, at the same time as it serves that notice, send a copy to the Secretary of State.
Extent Information
E69This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
64.—(1) This regulation applies where a competent authority has reasonable grounds for considering that an economic operator on whom a compliance notice has been served by the competent authority has failed to comply with that notice.
(2) The competent authority may serve a notice (“an enforcement notice”) on the economic operator which must—
(a)be in writing;
(b)describe the regulated non-automatic weighing instrument to which it relates in a manner sufficient to identify that instrument;
(c)specify, with reasons, the respects in which, in the opinion of the competent authority, the compliance notice has not been complied with;
(d)specify the steps that the economic operator must take to comply with the compliance notice; and
(e)specify the date, being not less than 21 days from the date of the notice, by which the economic operator is required to take the steps specified in it.
(3) An enforcement notice may impose either or both of the following requirements where appropriate—
(a)that the regulated non-automatic weighing instrument is to be withdrawn from the market unless the steps referred to in paragraph (2)(d) are taken; or
(b)that the placing on the market or making available on the market of the regulated non-automatic weighing instrument is to be prohibited or restricted unless the steps referred to in paragraph (2)(d) are taken.
(4) Where an enforcement notice is served by an competent authority other than the Secretary of State, it must at the same time as it serves that notice send a copy of the notice to the Secretary of State.
(5) If the Secretary of State is of the opinion that consideration ought to be given as to whether a certificate or notification which is granted by [F126an approved] body should be withdrawn, the Secretary of State must inform [F127that approved] body of that fact.
F128(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E33This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F126Words in reg. 64(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 37(a)(i) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F127Words in reg. 64(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 37(a)(ii) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F128Reg. 64(6) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 37(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
64.—(1) This regulation applies where a competent authority has reasonable grounds for considering that an economic operator on whom a compliance notice has been served by the competent authority has failed to comply with that notice.
(2) The competent authority may serve a notice (“an enforcement notice”) on the economic operator which must—
(a)be in writing;
(b)describe the regulated non-automatic weighing instrument to which it relates in a manner sufficient to identify that instrument;
(c)specify, with reasons, the respects in which, in the opinion of the competent authority, the compliance notice has not been complied with;
(d)specify the steps that the economic operator must take to comply with the compliance notice; and
(e)specify the date, being not less than 21 days from the date of the notice, by which the economic operator is required to take the steps specified in it.
(3) An enforcement notice may impose either or both of the following requirements where appropriate—
(a)that the regulated non-automatic weighing instrument is to be withdrawn from the market [F191in Northern Ireland] unless the steps referred to in paragraph (2)(d) are taken; or
(b)that the placing on the market or making available on the market of the regulated non-automatic weighing instrument is to be prohibited or restricted unless the steps referred to in paragraph (2)(d) are taken.
(4) Where an enforcement notice is served by an competent authority other than the Secretary of State, it must at the same time as it serves that notice send a copy of the notice to the Secretary of State.
(5) If the Secretary of State is of the opinion that consideration ought to be given as to whether a certificate or notification which is granted by a United Kingdom notified body should be withdrawn, the Secretary of State must inform that notified body of that fact.
F192(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E70This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F191Words in reg. 64(3)(a) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(4)(a)
F192Reg. 64(6) omitted (N.I.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 6(4)(b)
65.—(1) Where a notice is served under regulation 63 (compliance notice procedure) or 64 (enforcement notice procedure) by a competent authority other than the Secretary of State, an economic operator who is aggrieved by the decision to serve that notice may, in accordance with paragraphs (2) and (3) apply to the Secretary of State to review the decision and on such application the Secretary of State may—
(a)hold an inquiry in connection with the decision; and
(b)appoint an assessor for the purposes of assisting him with his review or any such inquiry.
(2) An application for a review of a decision under paragraph (1) must be made by notice in writing to the Secretary of State before the end of the period of 21 days beginning with the day on which the notice is served on the economic operator by the competent authority under regulation 63 or 64
(3) A notice of application for review under this regulation must state the grounds on which the application is made.
(4) The Secretary of State must, within a reasonable time, inform the economic operator and the authority referred to in paragraph (1) in writing of the Secretary of State's decision whether to uphold the decision of that authority and—
(a)in a case where the Secretary of State upholds that decision, must also state the grounds for the Secretary of State's decision; and
(b)in a case where the Secretary of State does not uphold that decision, may—
(i)where the review relates to regulation 63, give instructions for the withdrawal of the notice given under paragraph (2) of that regulation; or
(ii)where the review relates to regulation 64, give instructions for the withdrawal of the notice given under paragraph (2) of that regulation.
66.—(1) This paragraph applies where an enforcement notice has been served pursuant to regulation 64 (enforcement notice procedure) on an economic operator by a competent authority other than the Secretary of State and either—
(a)the time for making an application for a review pursuant to regulation 65 (review of decisions of competent authorities) has expired without such an application having been made; or
(b)an application has been made by the economic operator and determined without an instruction for the withdrawal of the notice being given and a period of 21 days has elapsed beginning with the day after notice of the outcome of the review has been served on the economic operator.
(2) Where this paragraph (1) applies, if the economic operator on whom the [F129enforcement notice] has been served, fails to comply with the requirements of that notice, that economic operator is guilty of an offence.
(3) An economic operator that fails to comply with an enforcement notice served on the economic operator by the Secretary of State is guilty of an offence.
Textual Amendments
F129Words in reg. 66(2) substituted (1.2.2019) by The Weights and Measures etc. (Miscellaneous) (Amendment) Regulations 2019 (S.I. 2019/5), regs. 1, 7(3)
67.—(1) Where the circumstances in paragraph (2) apply, an inspector may affix a disqualification mark to a regulated non-automatic weighing instrument which bears the—
(a)[F130UK] marking;
(b)M marking; and
(c)identification number of the [F131approved] body which carried out the conformity assessment procedure in respect of the instrument
(2) The circumstances referred to in paragraph (1) are that the instrument is used for any of the purposes listed in regulation 3(2) in circumstances where—
(a)the instrument does not conform to the essential requirements;
(b)the instrument does not conform to any F132...type examination certificate issued in relation to it;
(c)by reason of any adjustment, alteration, addition, repair or replacement it is likely that the instrument has ceased to be compliant with the essential requirements; or
(d)any requirements applicable to the instrument by virtue of Part 7 are not met.
(3) Where one or more of the markings and identification requirements referred to in paragraph (1) is not affixed to a regulated non-automatic weighing instrument, the inspector may affix a disqualification mark to the instrument.
(4) Where it appears to the inspector that the nature or degree of non-compliance of the regulated non-automatic weighing instrument under paragraph (1) is not such that a disqualification mark should be immediately affixed to it, the inspector may give to any person in possession of the instrument a notice requiring the person to ensure that the instrument is made to comply with the essential requirements before the expiry of 21 days from the date of the notice or such longer period as may be specified in the notice.
(5) If a notice given under paragraph (4) is not complied with, the inspector must affix a disqualification mark to the regulated non-automatic weighing instrument.
(6) Any disqualification mark which is affixed to a regulated non-automatic weighing instrument under this regulation must be affixed in such a position that it is clearly visible when the instrument is in its regular operating position.
[F133(6A) A disqualification mark may be affixed to a regulated non-automatic weighing instrument by affixing to the instrument a label which clearly, legibly and indelibly bears the disqualification mark.]
(7) A person is guilty of an offence if that person uses for any of the purposes mentioned in regulation 3(2) a regulated non-automatic weighing instrument to which there is affixed a disqualification mark, unless a re-qualification mark has been affixed to it in accordance with regulation 68 (re-qualification).
Extent Information
E34This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F130Word in reg. 67(1)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 38(a)(i) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F131Word in reg. 67(1)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 38(a)(ii) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F132Word in reg. 67(2)(b) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 38(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F133Reg. 67(6A) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(3)
67.—(1) Where the circumstances in paragraph (2) apply, an inspector may affix a disqualification mark to a regulated non-automatic weighing instrument which bears the—
(a)CE marking;
(b)M marking; and
(c)identification number of the notified body which carried out the conformity assessment procedure in respect of the instrument
(2) The circumstances referred to in paragraph (1) are that the instrument is used for any of the purposes listed in regulation 3(2) in circumstances where—
(a)the instrument does not conform to the essential requirements;
(b)the instrument does not conform to any EU-type examination certificate issued in relation to it;
(c)by reason of any adjustment, alteration, addition, repair or replacement it is likely that the instrument has ceased to be compliant with the essential requirements; or
(d)any requirements applicable to the instrument by virtue of Part 7 are not met.
(3) Where one or more of the markings and identification requirements referred to in paragraph (1) is not affixed to a regulated non-automatic weighing instrument, the inspector may affix a disqualification mark to the instrument.
(4) Where it appears to the inspector that the nature or degree of non-compliance of the regulated non-automatic weighing instrument under paragraph (1) is not such that a disqualification mark should be immediately affixed to it, the inspector may give to any person in possession of the instrument a notice requiring the person to ensure that the instrument is made to comply with the essential requirements before the expiry of 21 days from the date of the notice or such longer period as may be specified in the notice.
(5) If a notice given under paragraph (4) is not complied with, the inspector must affix a disqualification mark to the regulated non-automatic weighing instrument.
(6) Any disqualification mark which is affixed to a regulated non-automatic weighing instrument under this regulation must be affixed in such a position that it is clearly visible when the instrument is in its regular operating position.
[F133(6A) A disqualification mark may be affixed to a regulated non-automatic weighing instrument by affixing to the instrument a label which clearly, legibly and indelibly bears the disqualification mark.]
(7) A person is guilty of an offence if that person uses for any of the purposes mentioned in regulation 3(2) a regulated non-automatic weighing instrument to which there is affixed a disqualification mark, unless a re-qualification mark has been affixed to it in accordance with regulation 68 (re-qualification).
Extent Information
E71This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F133Reg. 67(6A) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 5(3)
68.—(1) This regulation applies where—
(a)a disqualification mark has been affixed to a regulated non-automatic weighing instrument in accordance with regulation 67 (disqualification);
(b)a notice has been served under regulation 67(4); or
(c)a regulated non-automatic weighing instrument intended to be used for any of the purposes mentioned in regulation 3(2) in the circumstances referred to in [F134regulation 67(2) or 67(3)] but a disqualification mark has not been affixed to the instrument.
(2) A person requiring a re-qualification mark to be affixed to the regulated non-automatic weighing instrument must submit it, in such manner as may be directed, to a re-qualification authority and provide such assistance as the requalification authority may reasonably require.
(3) For the purposes of this regulation, a requalification authority is—
(a)an inspector;
(b)an approved verifier;
(c)[F135an] approved F136... body for module F or F1 in [F137Schedule 7]; or
(d)a manufacturer whose quality system has been approved by a UK [F138approved] body under module D or D1 of [F139Schedule 7] for the purposes of re-qualification.
(4) A requalification authority may affix a re-qualification mark to that regulated non-automatic weighing instrument if satisfied that the instrument is compliant with—
(a)the essential requirements;
(b)any F140...type examination certificate which applies to it; and
(c)where it is intended that the instrument is to be used for trade any requirements applicable to that instrument by virtue of Schedule 4.
(5) For the purposes of being satisfied that a re-qualification mark may be affixed to a regulated non-automatic weighing instrument, a requalification authority may take such steps as the requalification authority considers appropriate, including testing the instrument by means of such test equipment as the requalification authority considers appropriate and suitable for the purpose.
(6) There may be charged in respect of any steps taken under paragraph (5) such fees as are reasonable in the circumstances.
(7) The requalification authority must keep a record of any test carried out under paragraph (5).
(8) Where a re-qualification mark is affixed to a regulated non-automatic weighing instrument pursuant to paragraph (4), it must be affixed in such a position that it obliterates as far as possible any disqualification mark.
[F141(9) Where a re-qualification mark is affixed to a regulated non-automatic weighing instrument pursuant to paragraph (4), it must be accompanied by—
(a)the letters indicating the status of the requalification authority, as follows—
(i)“INS” if the requalification authority is an inspector;
(ii)“AV” if the requalification authority is an approved verifier;
(iii)“AB” if the requalification authority is an approved body for module F or F1 in Schedule 7; or
(iv)“AM” if the requalification authority is a manufacturer whose quality system has been approved by an approved body under module D or D1 of Schedule 7 for the purposes of re-qualification;
(b)the identification number of the requalification authority;
(c)the year of re-qualification in numerical form; and
(d)the letters “GB” or, where the instrument was placed on the market pursuant to regulation 32D (Qualifying Northern Ireland Goods), the letters “QNIG”.
(10) In this regulation—
(a)“identification number of the requalification authority” means—
(i)where the requalification authority is an inspector or approved verifier, the number used to identify them in connection with their approval by or under section 11 of the Weights and Measures Act 1985 (certain equipment to be passed and stamped by inspector);
(ii)where the requalification authority is an approved body, the identification number assigned to it pursuant to regulation 53(1)(a);
(iii)where the requalification authority is a manufacturer whose quality system has been approved by an approved body under module D or D1 of Schedule 7 for the purposes of re-qualification, the requalification authority identification number assigned to it by the Secretary of State;
(b)the re-qualification mark and the information accompanying it required by paragraph (9) may be affixed to a regulated non-automatic weighing instrument by affixing to the instrument a label which clearly, legibly and indelibly bears the re-qualification mark and that accompanying information.]
Extent Information
E35This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F134Words in reg. 68(1)(c) substituted (1.2.2019) by The Weights and Measures etc. (Miscellaneous) (Amendment) Regulations 2019 (S.I. 2019/5), regs. 1, 7(4)
F135Word in reg. 68(3)(c) substituted (E.W.S.) (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(6)(a)
F136Word in reg. 68(3)(c) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 39(a)(i) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F137Words in reg. 68(3)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 39(a)(ii) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F138Word in reg. 68(3)(d) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 39(b)(i) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F139Words in reg. 68(3)(d) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 39(b)(ii) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F140Word in reg. 68(4)(b) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 39(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F141Reg. 68(9)(10) inserted (E.W.S.) (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(6)(b)
68.—(1) This regulation applies where—
(a)a disqualification mark has been affixed to a regulated non-automatic weighing instrument in accordance with regulation 67 (disqualification);
(b)a notice has been served under regulation 67(4); or
(c)a regulated non-automatic weighing instrument intended to be used for any of the purposes mentioned in regulation 3(2) in the circumstances referred to in [F193regulation 67(2) or 67(3)] but a disqualification mark has not been affixed to the instrument.
(2) A person requiring a re-qualification mark to be affixed to the regulated non-automatic weighing instrument must submit it, in such manner as may be directed, to a re-qualification authority and provide such assistance as the requalification authority may reasonably require.
(3) For the purposes of this regulation, a requalification authority is—
(a)an inspector;
(b)an approved verifier;
(c)a UK approved notified body for module F or F1 in Annex II to the Directive; or
(d)a manufacturer whose quality system has been approved by a UK notified body under module D or D1 of Annex II to the Directive for the purposes of re-qualification.
(4) A requalification authority may affix a re-qualification mark to that regulated non-automatic weighing instrument if satisfied that the instrument is compliant with—
(a)the essential requirements;
(b)any EU-type examination certificate which applies to it; and
(c)where it is intended that the instrument is to be used for trade any requirements applicable to that instrument by virtue of Schedule 4.
(5) For the purposes of being satisfied that a re-qualification mark may be affixed to a regulated non-automatic weighing instrument, a requalification authority may take such steps as the requalification authority considers appropriate, including testing the instrument by means of such test equipment as the requalification authority considers appropriate and suitable for the purpose.
(6) There may be charged in respect of any steps taken under paragraph (5) such fees as are reasonable in the circumstances.
(7) The requalification authority must keep a record of any test carried out under paragraph (5).
(8) Where a re-qualification mark is affixed to a regulated non-automatic weighing instrument pursuant to paragraph (4), it must be affixed in such a position that it obliterates as far as possible any disqualification mark.
[F194(9) Where a re-qualification mark is affixed to a regulated non-automatic weighing instrument pursuant to paragraph (4), it must be accompanied by—
(a)the letters indicating the status of the requalification authority, as follows—
(i)“INS” if the requalification authority is an inspector;
(ii)“AV” if the requalification authority is an approved verifier;
(iii)“NB” if the requalification authority is a UK approved notified body for module F or F1 in Annex II to the Directive; or
(iv)“AM” if the requalification authority is a manufacturer whose quality system has been approved by a UK notified body under module D or D1 of Annex II to the Directive for the purposes of re-qualification;
(b)the identification number of the requalification authority;
(c)the year of re-qualification in numerical form; and
(d)the letters “NI”.
(10) In this regulation—
(a)“identification number of the requalification authority” means—
(i)where the requalification authority is an inspector or approved verifier, the number used to identify them in connection with their approval by or under article 9 of the Weights and Measures (Northern Ireland) Order 1981 (weighing or measuring equipment for use for trade);
(ii)where the requalification authority is a UK approved notified body, the identification number referred to in regulation 45B(1)(a);
(iii)where the requalification authority is a manufacturer whose quality system has been approved by a UK notified body under module D or D1 of Annex II to the Directive for the purposes of re-qualification, the requalification authority identification number assigned to it by the Secretary of State;
(b)the re-qualification mark and the information accompanying it required by paragraph (9), may be affixed to a regulated non-automatic weighing instrument by affixing to the instrument a label which clearly, legibly and indelibly bears the re-qualification mark and that accompanying information.]
Extent Information
E72This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F193Words in reg. 68(1)(c) substituted (1.2.2019) by The Weights and Measures etc. (Miscellaneous) (Amendment) Regulations 2019 (S.I. 2019/5), regs. 1, 7(4)
F194Reg. 68(9)(10) inserted (N.I.) (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 14
69.—(1) Where an inspector considers that a test of a regulated non-automatic weighing instrument is necessary, otherwise than for the purposes of regulation 68 (re-qualification), the inspector may require the person who has control of the instrument, or whom the inspector has reasonable cause to believe has control of the instrument, to provide to the inspector such equipment, test liquid, materials, qualified personnel or other assistance as the inspector may reasonably require.
(2) Every instrument submitted for testing must be in a clean condition.
70.—(1) This regulation applies to a regulated non-automatic weighing instrument.
(2) If it appears to an inspector that a regulated non-automatic weighing instrument used for a purpose mentioned in regulation 3(2)—
(a)for a purpose for which it is unsuitable; or
(b)in circumstances where it is subject to any extraordinary environmental or operating conditions which—
(i)may prevent it operating consistently or accurately; or
(ii)are likely prematurely to degrade its metrological characteristics,
the inspector may affix a disqualification mark to the instrument; and any such mark must be affixed in such a position that it is clearly visible when the instrument is in its regular operating position.
71.—(1) Subject to paragraph (2), a person is guilty of an offence if, that person—
(a)affixes an authorised mark to a regulated non-automatic weighing instrument otherwise than in accordance with these Regulations;
(b)alters or defaces an authorised mark affixed to a regulated non-automatic weighing instrument (otherwise than as authorised by any provision of these Regulations);
(c)removes an authorised mark affixed to a regulated non-automatic weighing instrument; or
(d)affixes any other marking to a regulated non-automatic weighing instrument which is likely to deceive any person as to the meaning or form, or both, of an authorised mark.
(2) Where the alteration, defacement or removal of an authorised mark is occasioned solely—
(a)in the course of the adjustment or repair of a regulated non-automatic weighing instrument by a person regularly engaged in the business of repair of such instruments, or by that person's authorised agent; or
(b)by an enforcement officer or approved verifier in the carrying out of any of their functions under these Regulations,
that person or that person's authorised agent, enforcement officer or approved verifier is not guilty of an offence under paragraph (1)(b) or (1)(c).
(3) A person is guilty of an offence if that person places on the market, puts into service or uses for a purpose mentioned in regulation 3(2) a regulated non-automatic weighing instrument—
(a)from which, to that person's knowledge, an authorised mark has been removed; or
(b)which to that person's knowledge, bears—
(i)an authorised mark affixed otherwise than in accordance with these Regulations;
(ii)an authorised mark that has been altered or defaced otherwise than in the circumstances referred to in paragraph (2); or
(iii)any marking which is likely to deceive any person as to the meaning or form, or both, of an authorised mark.
(4) A regulated non-automatic weighing instrument in respect of which an offence under this regulation has been committed and any implement used in the commissioning of the offence shall be liable to be forfeited.
(5) In this regulation, “authorised mark” means
(a)the [F142UK] marking,
(b)the M marking,
(c)the identification number of the [F143approved] body which carried out the conformity assessment procedure in respect of the regulated non-automatic weighing instrument,
(d)a disqualification mark or
(e)a re-qualification mark.
Extent Information
E36This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F142Word in reg. 71(5)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 40(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F143Word in reg. 71(5)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 40(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
71.—(1) Subject to paragraph (2), a person is guilty of an offence if, that person—
(a)affixes an authorised mark to a regulated non-automatic weighing instrument otherwise than in accordance with these Regulations;
(b)alters or defaces an authorised mark affixed to a regulated non-automatic weighing instrument (otherwise than as authorised by any provision of these Regulations);
(c)removes an authorised mark affixed to a regulated non-automatic weighing instrument; or
(d)affixes any other marking to a regulated non-automatic weighing instrument which is likely to deceive any person as to the meaning or form, or both, of an authorised mark.
(2) Where the alteration, defacement or removal of an authorised mark is occasioned solely—
(a)in the course of the adjustment or repair of a regulated non-automatic weighing instrument by a person regularly engaged in the business of repair of such instruments, or by that person's authorised agent; or
(b)by an enforcement officer or approved verifier in the carrying out of any of their functions under these Regulations,
that person or that person's authorised agent, enforcement officer or approved verifier is not guilty of an offence under paragraph (1)(b) or (1)(c).
(3) A person is guilty of an offence if that person places on the market, puts into service or uses for a purpose mentioned in regulation 3(2) a regulated non-automatic weighing instrument—
(a)from which, to that person's knowledge, an authorised mark has been removed; or
(b)which to that person's knowledge, bears—
(i)an authorised mark affixed otherwise than in accordance with these Regulations;
(ii)an authorised mark that has been altered or defaced otherwise than in the circumstances referred to in paragraph (2); or
(iii)any marking which is likely to deceive any person as to the meaning or form, or both, of an authorised mark.
(4) A regulated non-automatic weighing instrument in respect of which an offence under this regulation has been committed and any implement used in the commissioning of the offence shall be liable to be forfeited.
(5) In this regulation, “authorised mark” means
(a)the CE marking,
(b)the M marking,
(c)the identification number of the notified body which carried out the conformity assessment procedure in respect of the regulated non-automatic weighing instrument,
[F195(ca)the UK(NI) indication;]
(d)a disqualification mark or
(e)a re-qualification mark.
Extent Information
E73This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
72.—(1) In this regulation, “event of default” means—
(a)The placing on the market of a regulated non-automatic weighing instrument which—
(i)does not meet the essential requirements applicable to it;
(ii)has not been the subject of an applicable conformity assessment procedure;
(iii)does not bear the markings or inscriptions required by these Regulations; or
(iv)is not accompanied by the documents and information required by these Regulations;
(b)any failure to—
(i)create or maintain any records required to be created or maintained under these Regulations;
(ii)provide to a competent authority documents or information pursuant to a requirement imposed by or under these Regulations; or
(iii)co-operate with the market surveillance authority under regulation 58(3);
(c)any failure to comply with regulation 46 (requirements for non-regulated non-automatic weighing instruments);
(d)any failure to comply with regulation 55 (putting into service of regulated non-automatic weighing instruments for the purposes listed in regulation 3(2)); or
(e)any failure to comply with obligations arising under regulation 69 (testing of regulated non-automatic weighing instruments).
(2) Where an event of default of a kind mentioned in paragraph (1)(a), (1)(b) or (1)(c) occurs as a result of the failure of an economic operator to comply with an obligation imposed on that economic operator by any provision of these Regulations, that economic operator is guilty of an offence.
(3) Where an event of default of a kind mentioned in paragraph (1)(d) or (1)(e) occurs, the person responsible for that event of default is guilty of an offence.
73. A person guilty of an offence under any provision of these Regulations is liable, on summary conviction—
(a)in England and Wales to a fine; and
(b)in Scotland or Northern Ireland to a fine not exceeding level 5 on the standard scale.
74.—(1) In proceedings against a person for an offence under these Regulations (other than regulation 71(3)), it shall be a defence for that person to show that that person took all reasonable steps and exercised all due diligence to avoid committing the offence.
(2) Where, in proceedings against a person for such an offence, the defence provided by paragraph (1) involves an allegation that the commission of the offence was due to—
(a)the act or default of another; or
(b)reliance on information given by another,
that person shall not, without the leave of the court, be entitled to rely on the defence, unless, not less than seven clear days before the hearing of the proceedings (or, in Scotland, the trial diet), that person has served a notice in accordance with paragraph (3) on the person bringing the proceedings.
(3) A notice under this regulation must give such information identifying or assisting in the identification of the person who committed the act or default or gave the information as is in the possession of the person serving the notice at the time that person serves it.
(4) A person shall not be entitled to rely on the defence provided by paragraph (1) by reason of reliance on information supplied by another, unless that person shows it was reasonable in all the circumstances for that person to have relied on the information, having regard in particular to—
(a)the steps which that person took, and those which might reasonably have been taken, for the purpose of verifying the information; and
(b)whether that person had any reason to disbelieve the information.
75.—(1) Where the commission by a person (“A”) of an offence under these Regulations is due to the act or default of another person (“B”) in the course of any business of A, B is guilty of the offence and may be proceeded against and punished, whether or not proceedings are taken against A.
(2) Where a body corporate commits an offence and it is proved that the offence was committed—
(a)with the consent or connivance of an officer of the body corporate; or
(b)as a result of the negligence of an officer of the body corporate,
the officer, as well as the body corporate, is guilty of the offence.
(3) In paragraph (2), a reference to an officer of a body corporate includes a reference to—
(a)a director, manager, secretary or other similar officer of the body corporate;
(b)a person purporting to act as a director, manager, secretary or other similar officer; and
(c)if the affairs of the body corporate are managed by its members, a member.
(4) In this regulation, references to a “body corporate” include references to a partnership in Scotland, and in relation to such partnership, any reference to a director, manager, secretary or other similar officer of a body corporate is a reference to a partner.
76.—(1) Any document required or authorised by these Regulations to be served on a person may be so served—
(a)by delivering it to that person or by leaving it at that person's proper address or by sending it by post to that person at that address;
(b)if the person is a body corporate, by serving it in accordance with sub-paragraph (a) on the secretary or clerk of that body corporate; or
(c)if the person is a partnership, by serving it in accordance with sub-paragraph (a) on a partner or on a person having control or management of the partnership business.
(2) For the purposes of paragraph (1), and for the purposes of section 7 of the Interpretation Act 1978 M8 (which relates to the service of documents by post) in its application to that paragraph, the proper address of any person on whom a document is to be served in accordance with these Regulations shall be that person's last known address except that—
(a)in the case of service on a body corporate or its secretary or clerk, it shall be the address of the registered or principal office of the body corporate; and
(b)in the case of service on a partnership or a partner or a person having the control or management of a partnership business, it shall be the principal office of the partnership,
and for the purposes of this paragraph the principal office of a company registered outside the United Kingdom or of a partnership carrying on business outside the United Kingdom is its principal office within the United Kingdom.
77.—(1) The Secretary of State must from time to time—
(a)carry out a review of these Regulations;
(b)set out the conclusions of the review in a report; and
(c)publish the report.
(2) In carrying out the review the Secretary of State must, so far as is reasonable, have regard to how the Directive is implemented in other EEA states.
(3) The report must, in particular—
(a)set out the objectives intended to be achieved by the regulatory system established by these Regulations;
(b)assess the extent to which those objectives are achieved; and
(c)assess whether those objectives remain appropriate and, if so, the extent to which they could be achieved by a system that imposes less regulation.
(4) The first report under this regulation must be published no later than 5 years after the date of the coming into force of these Regulations.
(5) Reports under this regulation are afterwards to be published at intervals not exceeding 5 years.
Extent Information
E37This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
77.—(1) The Secretary of State must from time to time—
(a)carry out a review of these Regulations;
(b)set out the conclusions of the review in a report; and
(c)publish the report.
(2) In carrying out the review the Secretary of State must, so far as is reasonable, have regard to how the Directive is implemented in other [F196relevant] states.
(3) The report must, in particular—
(a)set out the objectives intended to be achieved by the regulatory system established by these Regulations;
(b)assess the extent to which those objectives are achieved; and
(c)assess whether those objectives remain appropriate and, if so, the extent to which they could be achieved by a system that imposes less regulation.
(4) The first report under this regulation must be published no later than 5 years after the date of the coming into force of these Regulations.
(5) Reports under this regulation are afterwards to be published at intervals not exceeding 5 years.
Extent Information
E74This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F196Word in reg. 77(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 7
Margot James
Parliamentary Under Secretary of State Minister for Small Business, Consumers and Corporate Responsibility
Department for Business, Energy and Industrial Strategy
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: