- Latest available (Revised)
- Point in Time (30/01/2018)
- Original (As made)
Version Superseded: 01/06/2018
Point in time view as at 30/01/2018.
The Environmental Permitting (England and Wales) Regulations 2016, SCHEDULE 10 is up to date with all changes known to be in force on or before 23 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Regulation 35(1)
1. This Schedule applies in relation to every landfill except a landfill which finally ceased to accept waste for disposal before 16th July 2001.
2.—(1) In this Schedule—
(a)unless otherwise provided, an expression that is defined in the Landfill Directive has the meaning given in that Directive,
(b)“the Decision” means Council Decision 2003/33/EC M1,
(c)“the Decision Annex” means the Annex to the Decision, and
(d)“landfill” has the meaning given in Article 2(g) of the Landfill Directive, but does not include any operation excluded from the scope of that Directive by Article 3(2).
(2) When interpreting the Landfill Directive and the Decision for the purposes of this Schedule—
(a)an expression that is defined in Part 1 of these Regulations has the meaning given in that Part,
(b)“landfill permit” means environmental permit,
(c)“nature protection zone” means any—
(i)European site (which has the meaning given in regulation 8 of [F1the Conservation of Habitats and Species Regulations 2017]), or
(ii)site of special scientific interest (which has the meaning given in section 52(1) of the Wildlife and Countryside Act 1981 M2),
(d)“PAHs (polycyclic aromatic hydrocarbons)” means Naphthalene, Acenaphthylene, Acenaphthene, Anthracene, Benzo(a)anthracene, Benzo(b)fluoranthene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Chrysene, Coronene, Dibenzo(a,h)anthracene, Fluorene, Fluoranthene, Indeno(1,2,3-c,d)pyrene, Phenanthrene and Pyrene,
(e)“permit” means environmental permit,
(f)“SIC code” means the UK Standard Industrial Classification of Economic Activities 2007 (SIC 2007) published by the Office for National Statistics on 14th December 2007 and implemented on 1st January 2008 M3, and
(g)the competent authority is the regulator.
Textual Amendments
F1Words in Sch. 10 para. 2 substituted (30.11.2017) by The Conservation of Habitats and Species Regulations 2017 (S.I. 2017/1012), reg. 1(2), Sch. 6 para. 73(3)
Marginal Citations
M1OJ No L 11, 16.1.2003, p 27.
M21981 c. 69; the definition was inserted by paragraph 5(2) of Schedule 9 to the Countryside and Rights of Way Act 2000 (c. 37).
M3See http://www.ons.gov.uk/ons/guide-method/classifications/current-standard-classifications/standard-industrial-classification/index.html. A copy may be obtained from the Waste Regulation Team, the Department for Environment, Food and Rural Affairs, Area 2B, Nobel House, 17 Smith Square, London SW1P 3JR.
3. The regulator must require that every application for the grant of an environmental permit includes the information specified in Article 7 of the Landfill Directive.
4. The regulator must inspect every landfill site so as to comply with the requirements in Article 8(c) of the Landfill Directive.
5.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Landfill Directive—
(a)Article 4;
(b)Article 5(3) and (4);
(c)Article 6;
(d)Article 8, but not in respect of nuisances and hazards arising from traffic beyond the site of a landfill;
(e)Article 9;
(f)Article 10;
(g)Article 11(1);
(h)Article 12;
(i)Article 13;
(j)Article 14.
(2) The regulator must exercise those relevant functions having regard to Article 1 of the Landfill Directive.
(3) The regulator must exercise those relevant functions so as to ensure compliance with the requirements imposed on the member State by the following provisions of the Decision—
(a)Article 2;
(b)Article 3;
(c)Article 4.
(4) The regulator may exercise those relevant functions so as to permit the storage of metallic mercury in accordance with Regulation (EC) No 1102/2008 of the European Parliament and of the Council on the banning of exports of metallic mercury and certain mercury compounds and mixtures and the safe storage of metallic mercury M4.
(5) For the purposes of Article 5(1) of that Regulation, the regulator must send to the Secretary of State—
(a)a copy of any permit issued for a facility designated to store metallic mercury temporarily or permanently, and
(b)the respective safety assessment pursuant to Article 4(1) of that Regulation.
Marginal Citations
M4OJ No L 304, 14.11.2008, p 75.
6. When interpreting the Landfill Directive for the purposes of paragraph 5(1)—
(a)in Article 6(a), the words “This provision may not apply to” is to be read as “This provision does not apply to”,
(b)in Article 8(a)(iv), ignore the last sentence,
(c)the last sentence of paragraph 2 of Annex I is to be read as “The above provisions do not apply to inert landfills.”, and
(d)in paragraph 3(3) of Annex I, ignore the sentence immediately following the table headed “Leachate collection and bottom sealing”.
7. When interpreting the Decision Annex for the purposes of paragraph 5(3)—
(a)in points 1.1.1 and 1.2, the periods referred to as to be defined or determined by the member State are in each case 2 years,
(b)point 1.1.2(b) is to be read as requiring the SIC code of the process producing the waste to be part of the information referred to,
(c)in point 1.1.2(g), ignore the words “in case of mirror entries”,
(d)ignore the third sentence of section 2,
(e)in points 2.1.2.1, 2.2.2, 2.3.1 and 2.4.1 the table columns headed “L/S = 10 l/kg” must be used to determine limit values,
(f)in the table in point 2.1.2.2, the limit value for PAHs (polycyclic aromatic hydrocarbons) is set at 100mg/kg,
(g)in point 2.2.3, the first reference to “gypsum-based materials” is to be read as “gypsum-based and other high sulphate-bearing materials”,
(h)in point 2.3.3, the first reference to “suitable asbestos waste” is to be read as “suitable materials”, and
(i)in the table in point 2.4.1, the limit values are subject to the qualification that the regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher than those listed for specified wastes accepted at a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.
8. When interpreting the Decision Annex for the purposes of paragraph 5(3)—
(a)in point 2.3.2, the criteria to ensure that granular waste will have sufficient physical stability and bearing capacity are that it has either—
(i)if it is cohesive waste, a mean in situ shear strength of at least 50kPa, or
(ii)if it is non-cohesive waste, an in situ bearing ratio of at least 5%;
(b)point 2.4.2 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the criteria in paragraph (a)(i) and (a)(ii).
9. When interpreting the Decision Annex for the purposes of paragraph 5(3)—
(a)point 2.3.1 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to stable, non-reactive monolithic hazardous waste and non-hazardous waste which is to be landfilled in the same cell with such waste—
(i)it meets either—
(aa)the limit values for leaching set out in the table in point 2.3.1, or
(bb)the limit values for leaching set out in the following table—
Component | Symbol | mg/m2 |
---|---|---|
Arsenic | As | 1.3 |
Barium | Ba | 45 |
Cadmium | Cd | 0.2 |
Total Chromium | Crtotal | 5 |
Copper | Cu | 45 |
Mercury | Hg | 0.1 |
Molybdenum | Mo | 7 |
Nickel | Ni | 6 |
Lead | Pb | 6 |
Antimony | Sb | 0.3 |
Selenium | Se | 0.4 |
Zinc | Zn | 30 |
Chloride | Cl- | 10,000 |
Fluoride | F- | 60 |
Sulphate | SO42- | 10,000 |
Dissolved Organic Carbon | DOC | Must be evaluated |
(ii)it meets the additional criteria set out in the following table—
Parameter | Value |
---|---|
pH of the eluate from the monolith or crushed monolith | Must be evaluated |
Electrical conductivity (µ S.cm-1m-2) of the eluate from the monolith or crushed monolith | Must be evaluated |
Acid Neutralisation Capacity (ANC) of the crushed monolith | Must be evaluated |
(iii)it has a mean unconfined compressive strength of at least 1Mpa after 28 days' curing,
(iv)it has either—
(aa)dimensions of greater than 40cm along each side, or
(bb)a depth and fracture spacing when hardened of greater than 40cm, and
(v)where the waste was subjected to treatment to render it monolithic, prior to such treatment it met the following limit value—
(aa)loss on ignition of 10%, or
(bb)total organic carbon of 6%;
(b)point 2.4.1 in the Decision Annex is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to monolithic waste to be accepted at a landfill for hazardous waste—
(i)it complies with paragraphs (a)(ii) to (a)(v), and
(ii)it meets either—
(aa)the limit values for leaching set out in the table in point 2.4.1, or
(bb)the limit values for leaching set out in the following table—
1 The regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher for specified wastes accepted in a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment. | ||
Component | Symbol | mg/m21 |
---|---|---|
Arsenic | As | 20 |
Barium | Ba | 150 |
Cadmium | Cd | 1 |
Total Chromium | Crtotal | 25 |
Copper | Cu | 60 |
Mercury | Hg | 0.4 |
Molybdenum | Mo | 20 |
Nickel | Ni | 15 |
Lead | Pb | 20 |
Antimony | Sb | 2.5 |
Selenium | Se | 5 |
Zinc | Zn | 100 |
Chloride | Cl- | 20,000 |
Fluoride | F- | 200 |
Sulphate | SO42- | 20,000 |
Dissolved Organic Carbon | DOC | Must be evaluated |
10.—(1) The regulator must set out any reasoned decision under Article 13(a)(iii) of the Landfill Directive in a closure notice served on the operator.
(2) A closure notice must, in addition to stating the regulator's reasons for requiring initiation of the closure procedure, specify—
(a)the steps the operator is required to take to initiate the procedure, and
(b)the period within which they must be taken.
(3) The regulator may withdraw a closure notice at any time by further notice served on the operator.
(4) Closure of a landfill does not relieve the operator of liability under the conditions of the environmental permit.
11. When determining an application for the surrender, in whole or in part, of an environmental permit, the regulator must exercise its functions so as to ensure the operator complies with the requirements in Article 13(d) of the Landfill Directive.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: