- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Version Superseded: 22/04/2021
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the The Nuclear Safeguards (Fissionable Material and Relevant International Agreements) (EU Exit) Regulations 2019.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Statutory Instruments
Exiting The European Union
Nuclear Safeguards
Made
7th February 2019
Coming into force in accordance with regulation 1.
The Secretary of State makes the following Regulations in exercise of the powers conferred by sections 76A(7) and 112(1B) of the Energy Act 2013 M1.
In accordance with section 113(2)(aa) and (c) of that Act, a draft of these Regulations has been laid before Parliament and approved by resolution of each House of Parliament.
Marginal Citations
M12013 c. 32. Part 3 of the Energy Act, which deals with nuclear regulation, was amended by the Nuclear Safeguards Act 2018 (c. 15) which inserted sections 76A, 76B, and 112(1A) to (1E).
1.—(1) These Regulations may be cited as the Nuclear Safeguards (Fissionable Material and Relevant International Agreements) (EU Exit) Regulations 2019.
(2) These Regulations come into force on exit day.
Commencement Information
I1Reg. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
2.—(1) The Secretary of State specifies the material, which is set out in paragraph (2), as “fissionable material” for the purposes of the definition of “qualifying nuclear material” set out in section 76A(6) of the Energy Act 2013 M2.
(2) “Fissionable material” means—
(a)plutonium-239;
(b)uranium-233;
(c)uranium containing the isotopes 235 or 233 or both, in an amount such that the abundance ratio of the sum of these isotopes to the isotope 238 is greater than the ratio of the isotope 235 to the isotope 238 occurring in nature; and
(d)any material containing one or more of the materials described in sub-paragraphs (a) to (c).
Commencement Information
I2Reg. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Marginal Citations
M2Section 76A(6) was inserted into the Energy Act by the Nuclear Safeguards Act 2018 (c. 15).
3. The Secretary of State specifies each of the following agreements as a “relevant international agreement” for the purposes of section 112(1A) of the Energy Act 2013 M3—
(a)the Agreement, signed on 7th June 2018, between the United Kingdom and the International Atomic Energy Agency for the application of safeguards in the United Kingdom in connection with the Treaty on the Non-Proliferation of Nuclear Weapons;
(b)the Additional Protocol, signed on 7th June 2018, between the United Kingdom and the International Atomic Energy Agency which is additional to the Agreement described in paragraph (a);
(c)the Agreement, signed on 4th May 2018, between the Government of the United Kingdom of Great Britain and Northern Ireland and the Government of the United States of America for Cooperation in Peaceful Uses of Nuclear Energy;
(d)the Agreement, signed on 2nd November 2018, between the Government of the United Kingdom of Great Britain and Northern Ireland and the Government of Canada for Cooperation in Peaceful Uses of Nuclear Energy;
(e)the Agreement, signed on 21st August 2018, between the Government of the United Kingdom of Great Britain and Northern Ireland and the Government of Australia for Cooperation in Peaceful Uses of Nuclear Energy; F1...
(f)the Agreement, signed on 25th February 1998, between the Government of the United Kingdom of Great Britain and Northern Ireland and the Government of Japan for Cooperation in Peaceful Uses of Nuclear Energy;
[F2(g)the EU withdrawal agreement;]
[F3(h)the Agreement between the Government of the United Kingdom of Great Britain and Northern Ireland and the European Atomic Energy Community for cooperation on the safe and peaceful uses of nuclear energy;]
and any reference in paragraphs (a) to [F4(h)] to an agreement is to it as it has effect for the time being.
Textual Amendments
F1Word in reg. 3(e) omitted (31.12.2020) by virtue of The European Union (Withdrawal Agreement) (Relevant International Agreements) (EU Exit) Regulations 2020 (S.I. 2020/992), regs. 1, 3(2)(a)
F2Reg. 3(g) inserted (31.12.2020) by The European Union (Withdrawal Agreement) (Relevant International Agreements) (EU Exit) Regulations 2020 (S.I. 2020/992), regs. 1, 3(2)(b)
F3Reg. 3(h) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), ss. 28(1)(a), 40(7); S.I. 2020/1662, reg. 2(y)
F4Word in reg. 3 substituted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), ss. 28(1)(b), 40(7); S.I. 2020/1662, reg. 2(y)
Commencement Information
I3Reg. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Marginal Citations
M3Section 112(1A) was inserted into the Energy Act by the Nuclear Safeguards Act 2018.
4.—(1) The Secretary of State must from time to time—
(a)carry out a review of the regulatory provision contained in these Regulations, and
(b)publish a report setting out the conclusions of the review.
(2) The first report must be published before 1st January 2024.
(3) Subsequent reports must be published at intervals not exceeding 5 years.
(4) Section 30(3) of the Small Business, Enterprise and Employment Act 2015 requires that a review carried out under this regulation must, so far as is reasonable, have regard to how the obligations under the Agreement with the Agency are implemented in other countries which are subject to the obligations.
(5) Section 30(4) of the Small Business, Enterprise and Employment Act 2015 requires that a report published under this regulation must, in particular—
(a)set out the objectives intended to be achieved by the regulatory provision referred to in paragraph (1)(a);
(b)assess the extent to which those objectives are achieved;
(c)assess whether those objectives remain appropriate; and
(d)if those objectives remain appropriate, assess the extent to which they could be achieved in another way which involves less onerous regulatory provision.
(6) In this regulation, “regulatory provision” has the same meaning as in sections 28 to 32 of the Small Business, Enterprise and Employment Act 2015 (see section 32 of that Act).
Commencement Information
I4Reg. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Richard Harrington
Parliamentary Under Secretary of State
Department for Business, Energy and Industrial Strategy
(This note is not part of the Regulations)
These Regulations commence on exit day, which is when the United Kingdom will cease to be a member of both the European Union and of the European Atomic Energy Community. Prior to exit day, nuclear safeguards in the United Kingdom, were regulated by the EURATOM treaty, as amended by the Treaty of Lisbon, which was signed on 13 December 2007, and by Commission Regulation (EURATOM) 302/2005 (OJ L 54, 28.2.2005 p1-71). With effect from exit day, the United Kingdom's domestic provisions on nuclear safeguards will be set out in the Energy Act 2013 (c. 32), as amended by the Nuclear Safeguards Act 2018 (c. 15), and in these Regulations and the Nuclear Safeguards (EU Exit) Regulations 2019 (S.I. 2019/196).
Section 76A(6) of the Energy Act 2013 defines “qualifying nuclear material” to include fissionable material. Subsection 76A(7) provides that the Secretary of State may prescribe the meaning of “fissionable material” by regulations. Regulation 2(2) defines “fissionable material”.
Section 112(1A) of the Energy Act defines “relevant international agreement” and paragraph (b) expands the definition to include an agreement to which the United Kingdom is a party and which is specified by the Secretary of State under subsection 112(1B). In regulation 3 the Secretary of State specifies six international agreements that constitute a “relevant international agreement” for this purpose. These are an agreement and an additional protocol with the International Atomic Energy Agency together with agreements between the United Kingdom and the United States, Canada, Australia and Japan. The text of the six relevant international agreements is published on the Foreign and Commonwealth Office website www.treaties.fco.gov.uk/treaties.
Regulation 4 requires a review of the Regulations before 1st January 2024, which is the same date as that set out in the Nuclear Safeguards (EU Exit) Regulations 2019.
A full impact assessment of the effect that this instrument, together with the Nuclear Safeguards (EU Exit) Regulations 2019, will have on the costs of business and the voluntary sector is available from the Department for Business, Energy and Industrial Strategy at 1 Victoria Street, London SW1H 0ET and is published on the BEIS website www.legislation.gov.uk. It is also published with the Explanatory Memorandum alongside the instrument on www.legislation.gov.uk.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including:
The data on this page is available in the alternative data formats listed: