- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Materials and Articles in Contact with Food (Amendment) (EU Exit) Regulations 2019.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Statutory Instruments
Exiting The European Union
Food
Made
26th March 2019
Coming into force in accordance with regulation 1
The Secretary of State makes the following Regulations in exercise of the powers conferred by section 8(1) of the European Union (Withdrawal) Act 2018 M1.
In accordance with paragraph 1(1) of Schedule 7 to that Act, a draft of this instrument has been laid before Parliament and approved by a resolution of each House of Parliament.
As required by Article 9 of Regulation (EC) No. 178/2002 of the European Parliament and of the Council laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety there has been open and transparent public consultation during the preparation of these Regulations.
Marginal Citations
1. These Regulations may be cited as the Materials and Articles in Contact with Food (Amendment) (EU Exit) Regulations 2019 and come into force on exit day.
Commencement Information
I1Reg. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
2. In these Regulations—
“2012 Regulations” means the Materials and Articles in Contact with Food (England) Regulations 2012 M2;
“Regulation 1935/2004” means Regulation (EC) No. 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC;
“Regulation 1895/2005” means Commission Regulation (EC) No. 1895/2005 on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food;
“Regulation 2023/2006” means Commission Regulation (EC) No. 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food;
“Regulation 282/2008” means Commission Regulation (EC) No. 282/2008 on recycled plastic materials and articles intended to come into contact with foods and amending Regulation (EC) No 2023/2006;
“Regulation 450/2009” means Commission Regulation (EC) No. 450/2009 on active and intelligent materials and articles intended to come into contact with food;
“Regulation 10/2011” means Commission Regulation (EU) No. 10/2011 on plastic materials and articles intended to come into contact with food;
“Regulation 2018/213” means Commission Regulation (EU) 2018/213 on the use of bisphenol A in varnishes and coatings intended to come into contact with food and amending Regulation (EU) No 10/2011 as regards the use of that substance in plastic food contact materials.
Commencement Information
I2Reg. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
3. The 2012 Regulations are amended as follows.
Commencement Information
I3Reg. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
4. In regulation 4, in paragraph (3), omit “Community”.
Commencement Information
I4Reg. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
5. In regulation 6—
(a)in paragraph (1)(a), omit “and 13 (competent authorities of Member States)”;
(b)in paragraph (1)(b), for “16(1)”, substitute “ 16 ”.
Commencement Information
I5Reg. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
6. For regulation 10, substitute—
“10.—(1) The quantities of lead and cadmium transferred from ceramic articles must not exceed the limits laid down below.
(2) Unless it is demonstrated that the materials used to make the ceramic article did not contain lead or cadmium, the quantities of lead and cadmium transferred from ceramic articles must be determined by means of a test, the conditions of which are specified in Schedule 2, using the method of analysis described in Schedule 3.
(3) Where a ceramic article consists of a vessel fitted with a ceramic lid, the lead or cadmium limits (or both) which may not be exceeded (mg/dm2 or mg/litre) must be that which applies to the vessel alone. The vessel alone and the inner surface of the lid must be tested separately and under the same conditions. The sum of the two lead or cadmium extraction levels thus obtained must be related as appropriate to the surface area or the volume of the vessel alone.
(4) A ceramic article is to be recognised as satisfying the requirements of these Regulations relating to such articles if the quantities of lead and/or cadmium extracted during the test carried out under the conditions laid down in Schedule 2 and Schedule 3 do not exceed the following limits— Pb Cd Category 1— Articles which cannot be filled and articles which can be filled, the internal depth of which, measured from the lowest point to the horizontal plane passing through the upper rim, does not exceed 25 mm 0,8 mg/dm2 0,07 mg/dm2. Category 2— All other articles which can be filled 4,0 mg/l 0,3 mg/l. Category 3— Cooking ware; packaging and storage vessels having a capacity of more than three litres 1,5 mg/l 0,1 mg/l.
(5) However, where a ceramic article does not exceed the above quantities by more than 50 %, that article is nevertheless to be recognised as satisfying the requirements of these Regulations relating to such articles if at least three other articles with the same shape, dimensions, decoration and glaze are subjected to a test carried out under the conditions laid down in Schedule 2 and Schedule 3 and the average quantities of lead and/or cadmium extracted from those articles do not exceed the limits set, with none of those articles exceeding those limits by more than 50 %.”.
Commencement Information
I6Reg. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
7. Insert a new regulation 10A—
“10A.—(1) No person may place on the market a ceramic article that does not comply with the requirements of regulation 10(4) as read with regulation 10(5).
(2) At the marketing stages up to and including the retail stage, ceramic articles which are not yet in contact with foodstuffs must be accompanied by a written declaration in accordance with Article 16 of Regulation 1935/2004. That declaration is to be issued by the manufacturer or by a seller in [F1Great Britain] and must contain the information laid down in Schedule 4.
(3) Appropriate documentation to demonstrate that the ceramic articles comply with the migration limits for lead and cadmium set out in regulation 10 must be made available by the manufacturer or the importer to the competent authorities on request. That documentation must contain the results of the analysis carried out, the test conditions and the name and the address of the laboratory that performed the testing.
(4) The documentation specified in paragraph (3) is not required where documentary evidence is provided to show that the materials used to make the ceramic article did not contain lead or cadmium.
(5) Paragraphs (2) and (3) do not apply in relation to a ceramic article which is second-hand.”.
Textual Amendments
F1Words in reg. 7 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(2)
Commencement Information
I7Reg. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
8. In regulation 18, after paragraph (2), insert—
“(3) The criteria applicable to the method of determining the level of vinyl chloride in materials and articles and of determining vinyl chloride released by materials and articles are as set out in paragraphs (4), (5), and (6).
(4) The level of vinyl chloride in materials and articles and the level of vinyl chloride released by materials and articles to foodstuffs are determined by means of gas-phase chromatography using the ‘headspace’ method;
(5) For the purposes of determining vinyl chloride released by materials and articles to foodstuffs, the detection limit is 0.01 mg/kg;
(6) Vinyl chloride released by materials and articles to foodstuffs is in principle determined in the foodstuffs. When the determination in certain foodstuffs is shown to be impossible for technical reasons, competent authorities may permit determination by simulants for these particular foodstuffs.”.
Commencement Information
I8Reg. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
9. In regulation 19(1), for “10(3) or (4)”, substitute “ 10A(1) ”.
Commencement Information
I9Reg. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
10. After the Schedule, insert the Schedules contained in the Schedules to these Regulations.
Commencement Information
I10Reg. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
11. Regulation 1935/2004 is amended as follows.
Commencement Information
I11Reg. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
12. In Article 1—
(a)omit “internal”;
(b)omit “in the Community”.
Commencement Information
I12Reg. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
13. In Article 2, in paragraph 2, after point (d), insert—
“(e)“prescribe”, means prescribe by regulations;
(f)“appropriate authority” means—
(i)in relation to England, the Secretary of State;
(ii)in relation to Wales, the Welsh Ministers;
(iii)in relation to Scotland, the Scottish Ministers;
F2(iv). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(g)“Food Safety Authority” means—
(i)as regards [F3England and Wales], the Food Standards Agency;
(ii)as regards Scotland, Food Standards Scotland;
F4(h). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .”.
Textual Amendments
F2Words in reg. 13 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(3)(a)
F3Words in reg. 13 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(3)(b)
F4Words in reg. 13 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(3)(c)
Commencement Information
I13Reg. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
14. In Article 4—
(a)in paragraph 1, for “the Community provisions applicable to food, such as the provisions of Directive 89/107/EEC on food additives and related implementing measures, or, if no Community provisions exist, with the national provisions applicable to food”, substitute “ retained EU law and any other enactment applicable to food ”;
(b)in paragraph 2, for “the relevant Community provisions applicable to food shall be authorised and used in accordance with the relevant Community provisions applicable to food, and shall comply with the provisions of this Regulation and its implementing measures”, substitute “ retained EU law and any other enactment applicable to food ”.
Commencement Information
I14Reg. 14 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
15. In Article 5—
(a)in paragraph 1—
(i)in the opening words, for “adopted or amended by the Commission”, substitute “ prescribed by the appropriate authority ”;
(ii)for subparagraph (m), substitute—
“provisions requiring the appropriate authority to establish and maintain a publicly available Register of authorised substances, processes, or materials or articles;”;
(iii)omit the three unnumbered paragraphs which immediately follow subparagraph 1;
(b)omit paragraph 2.
Commencement Information
I15Reg. 15 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
16. Omit Article 6.
Commencement Information
I16Reg. 16 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
17. In Article 7—
(a)in both places in which it occurs (including the heading), omit “European”;
(b)omit “, hereinafter referred to as ‘the Authority’”.
Commencement Information
I17Reg. 17 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
18. For Article 9, substitute—
1. To obtain the authorisation referred to in Article 8(1), the following procedure applies—
(a)an application is to be submitted to the appropriate authority accompanied by the following—
(i)the name and address of the applicant;
(ii)a technical dossier containing the information specified in the guidelines for the safety assessment of a substance to be published by the Food Safety Authority;
(iii)a summary of the technical dossier;
(b)the appropriate authority must—
(i)acknowledge receipt of the application in writing to the applicant within 14 days of its receipt; the acknowledgement must state the date of receipt of the application;
(ii)inform the Food Safety Authority without delay;
(iii)make the application and any supplementary information supplied by the applicant available to the Food Safety Authority.
2. The Food Safety Authority must publish detailed guidelines concerning the preparation and the submission of the application.”.
Commencement Information
I18Reg. 18 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
19. In Article 10—
(a)in the heading, for “Authority”, substitute “ Food Safety Authority ”;
(b)in paragraph 1—
(i)in both places in which it occurs, for “Authority”, substitute “ Food Safety Authority ”;
(ii)omit “, the Commission and the Member States”;
(c)in paragraph 2, in each place in which it occurs, for “Authority”, substitute “ Food Safety Authority ”;
(d)in paragraph 3—
(i)in the opening words, for “Authority”, substitute “ Food Safety Authority ”;
(ii)in point (b), omit “, the Commission and the Member States”;
(e)in paragraph 5—
(i)for “Authority”, substitute “ Food Safety Authority ”;
(ii)for “Commission, the Member States”, substitute “ appropriate authority ”;
(f)in paragraph 6, for “Authority”, substitute “ Food Safety Authority ”.
Commencement Information
I19Reg. 19 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
20. In Article 11—
(a)in the heading, omit “Community”;
(b)for paragraph 1, substitute—
“1. The authorisation of a substance must be prescribed by the appropriate authority and may contain such restrictions or conditions as the appropriate authority may specify in light of the opinion of the Food Safety Authority.”;
(c)for paragraph 2, substitute—
“2. In determining whether to authorise a substance, and what restrictions or conditions, if any, to specify, the appropriate authority must take account of relevant provisions of retained EU law and other legitimate factors relevant to the matter under consideration. Where the determination is not in accordance with the opinion of the Food Safety Authority, the appropriate authority must provide without delay an explanation of the reasons for the differences. If the appropriate authority does not intend to authorise a substance after a favourable opinion by the Food Safety Authority, it must inform the applicant without delay and provide the applicant with an explanation.”;
(d)omit paragraph 3;
(e)for paragraph 4, substitute—
“4. After the authorisation of a substance in accordance with this Regulation, any business operator using the authorised substance or materials or articles containing the authorised substance must comply with any condition or restriction attached to such authorisation.”;
(f)for paragraphs 5, substitute—
“5. The applicant or any business operator using the authorised substance or materials or articles containing the authorised substance must immediately inform the Food Safety Authority of any new scientific or technical information, which might affect the safety assessment of the authorised substance in relation to human health. If necessary, the Food Safety Authority must then review the assessment.”;
(g)omit paragraph 6.
Commencement Information
I20Reg. 20 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
21. In Article 12—
(a)in paragraph 3—
(i)for “a Member State or the Commission” substitute “ the appropriate authority ”;
(ii)in both places in which it occurs, for “Authority”, substitute “ Food Safety Authority ”;
(b)for paragraph 4, substitute—
“4. The appropriate authority must examine the opinion of the Food Safety Authority without delay and may prescribe amendments to the authorisation, including without limitation changes in the conditions of use and, if any, in the restrictions specified in the authorisation.”;
(c)omit paragraphs 5 and 6.
Commencement Information
I21Reg. 21 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
22. Omit Article 13.
Commencement Information
I22Reg. 22 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
23. For Article 14, substitute—
1. Any act or omission of the Food Safety Authority relating to this Regulation may be reviewed by the appropriate authority on its own initiative or in response to a request from any person directly and individually concerned.
2. A person requesting such a review must submit a request in writing to the appropriate authority within two months from the day on which the person became aware of the act or omission in question.
3. The appropriate authority must take a decision within two months of receipt of the request requiring, if appropriate, the Food Safety Authority to undo its act or to remedy its failure to act.”.
Commencement Information
I23Reg. 23 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
[F524. In Article 15—
(a)in paragraph 1—
(i)in point (c), omit “established within the Community”;
(ii)in point (e), for “relevant Community provisions or, in their absence, national provisions” substitute “ retained EU law or any other enactments ”;
(b)in paragraph 4, for “in a language easily understood by purchasers” substitute “ in English, or in English and Welsh ”;
(c)omit paragraphs 5 and 6;
(d)in paragraph 9, at point (b), for “, in their absence, with any national provisions” substitute “ any other enactment ”.]
Textual Amendments
F5Reg. 24 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(4)
Commencement Information
I24Reg. 24 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
25. For Article 16, substitute—
The specific measures referred to in Article 5 must require that materials and articles covered by those measures be accompanied by a written declaration stating that they comply with the rules applicable to them. Appropriate documentation must be available to demonstrate such compliance. That documentation must be made available to the competent authorities on demand.”.
Commencement Information
I25Reg. 25 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
26. In Article 17, at paragraph 3, omit “in the Community”.
Commencement Information
I26Reg. 26 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
27. In Article 18—
(a)in paragraph 1—
(i)in the opening words, for “a Member State”, substitute “ the appropriate authority ”;
(ii)omit the second paragraph;
(b)for paragraph 2, substitute—
“2. The appropriate authority must, having where appropriate obtained the advice of the Food Safety Authority, review the grounds referred to in paragraph 1 as soon as possible. If the appropriate authority considers that amendments to the relevant specific measures are necessary in order to remedy the difficulties referred to in paragraph 1 and to ensure the protection of human health, those amendments must be prescribed by the appropriate authority.”;
(c)omit paragraphs 3 and 4.
Commencement Information
I27Reg. 27 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
28. Omit Article 19.
Commencement Information
I28Reg. 28 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
29. In Article 20—
(a)in paragraph 3—
(i)for “Commission”, substitute “ appropriate authority ”;
(ii)for “Authority”, substitute “ Food Safety Authority ”;
(b)for paragraph 4, substitute—
“4. The Food Safety Authority must supply the appropriate authority with all information in its possession on request by the appropriate authority.”;
(c)in paragraph 5, for “Commission, the Authority and the Member States”, substitute “ appropriate authority and the Food Safety Authority ”;
(d)in paragraph 6—
(i)for “Authority, the Commission and the Member States”, substitute “ appropriate authority and the Food Safety Authority ”;
(ii)for “Commission and the applicant”, substitute “ appropriate authority, the Food Safety Authority and the applicant ”.
Commencement Information
I29Reg. 29 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
30. In Article 21, for “Authority” substitute “ Food Safety Authority ”.
Commencement Information
I30Reg. 30 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
31. For Article 22, substitute—
Amendments to Annexes 1 and 2 may be prescribed by the appropriate authority.”.
Commencement Information
I31Reg. 31 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
32. Omit Article 23.
Commencement Information
I32Reg. 32 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
33. Insert a new Article 23A—
1. Any power to make regulations under this Regulation—
(a)so far as exercisable by a Minister of the Crown, is exercisable by statutory instrument;
(b)so far as exercisable by the Welsh Ministers, is exercisable by statutory instrument;
F6(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. For regulations made under this Regulation by the Scottish Ministers, see also section 27 of the Interpretation and Legislative Reform (Scotland) Act 2010 M3 (Scottish statutory instruments).
3. Any power to make regulations under this Regulation includes power—
(a)to make different provision in relation to different cases or classes of case (including different provision for different areas or different classes of business);
(b)to provide for such exceptions, limitations and conditions, and to make such supplementary, incidental, consequential or transitional provisions, as the appropriate authority considers necessary or expedient.
4. [F7Any statutory instrument or Scottish statutory instrument] containing regulations under this Regulation is subject to annulment in pursuance of a resolution—
(a)in the case of England, of either House of Parliament;
(b)in the case of Wales, of [F8Senedd Cymru];
(c)in the case of Scotland, of the Scottish Parliament;
F9(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. In this Regulation, any power—
(a)of the Secretary of State to make regulations is limited to regulations which apply in relation to England only;
(b)of the Welsh Ministers to make regulations is limited to regulations which apply in relation to Wales only;
(c)of the Scottish Ministers to make regulations is limited to regulations which apply in relation to Scotland only;
F10(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .”.
Textual Amendments
F6Words in reg. 33 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(5)(a)
F7Words in reg. 33 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(5)(b)(i)
F8Words in reg. 33 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(5)(b)(ii)
F9Words in reg. 33 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(5)(b)(iii)
F10Words in reg. 33 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(5)(c)
Commencement Information
I33Reg. 33 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
34. Omit Articles 24 and 25.
Commencement Information
I34Reg. 34 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
35. After Article 28, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I35Reg. 35 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
36. Regulation 1895/2005 is amended as follows.
Commencement Information
I36Reg. 36 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
37. After Article 8, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I37Reg. 37 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
38. Regulation 2013/2006 is amended as follows.
Commencement Information
I38Reg. 38 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
39. After Article 8, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”
Commencement Information
I39Reg. 39 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
40. Regulation 282/2008 is amended as follows.
Commencement Information
I40Reg. 40 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
41. In Article 4, for point (b), substitute—
“(b)the plastic input must originate from plastic materials and articles that have been manufactured in accordance with legislation on plastic food contact materials and articles, in particular, Council Directive 78/142/EEC of 30 January 1978 on the approximation of laws of the Member States relating to materials and articles which contain vinyl chloride monomer and are intended to come into contact with foodstuffs and Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs;”.
Commencement Information
I41Reg. 41 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
42. In Article 5—
(a)omit paragraph 2;
(b)in both places in which it occurs (including the heading), for “Authority”, substitute “ Food Safety Authority ”.
Commencement Information
I42Reg. 42 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
43. For Article 6, substitute—
1. The authorisation of a recycling process must be prescribed by the appropriate authority and must contain—
(a)the name of the recycling process;
(b)the name and address of the authorisation holder;
(c)a short description of the recycling process;
(d)any conditions or restrictions concerning the plastic input;
(e)any conditions or restrictions concerning the recycling process;
(f)any characterisation of the recycled plastic;
(g)any conditions in the field of application of the recycled plastic that has been manufactured by the recycling process;
(h)any requirements concerning monitoring of the compliance of the recycling process with the conditions of the authorisation;
(i)the date from which the authorisation is effective.
2. Any converter using recycled plastic from the authorised recycling process or any business operator using materials or articles containing recycled plastic from the authorised recycling process must comply with any condition or restriction attached to such authorisation.
3. The applicant or any business operator using the recycling process must immediately inform the Food Safety Authority of any new scientific or technical information, which might affect the safety assessment of the recycling process in relation to human health. If necessary, the Food Safety Authority must review the assessment.”.
Commencement Information
I43Reg. 43 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
44. Insert a new Article 6A—
1. Any power to make regulations under this Regulation—
(a)so far as exercisable by a Minister of the Crown, is exercisable by statutory instrument;
(b)so far as exercisable by the Welsh Ministers, is exercisable by statutory instrument;
F11(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. For regulations made under this Regulation by the Scottish Ministers, see also section 27 of the Interpretation and Legislative Reform (Scotland) Act 2010 M4 (Scottish statutory instruments).
3. Any power to make regulations under this Regulation includes power—
(a)to make different provision in relation to different cases or classes of case (including different provision for different areas or different classes of business); and
(b)to provide for such exceptions, limitations and conditions, and to make such supplementary, incidental, consequential or transitional provisions, as the appropriate authority considers necessary or expedient.
4. [F12Any statutory instrument or Scottish statutory instrument] containing regulations made under this Regulation is subject to annulment in pursuance of a resolution—
(a)in the case of England, of either House of Parliament;
(b)in the case of Wales, of [F13Senedd Cymru];
(c)in the case of Scotland, of the Scottish Parliament;
F14(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. In this Regulation, any power—
(a)of the Secretary of State to make regulations is limited to regulations which apply in relation to England only;
(b)of the Welsh Ministers to make regulations is limited to regulations which apply in relation to Wales only;
(c)of the Scottish Ministers to make regulations is limited to regulations which apply in relation to Scotland only;
F15(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .”.
Textual Amendments
F11Words in reg. 44 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(6)(a)
F12Words in reg. 44 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(6)(b)(i)
F13Words in reg. 44 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(6)(b)(ii)
F14Words in reg. 44 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(6)(b)(iii)
F15Words in reg. 44 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(6)(c)
Commencement Information
I44Reg. 44 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
45. Article 7 is omitted.
Commencement Information
I45Reg. 45 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
46. For Article 8, substitute—
1. The applicant or any business operator using the recycling process may apply for modification of the existing authorisation in accordance with the procedure laid down in Article 5(1).
2. The application must be accompanied by the following:
(a)a reference to the original application;
(b)a technical dossier containing the new information;
(c)a new complete summary of the technical dossier in a standardised form.
3. The Food Safety Authority must evaluate whether the opinion or the authorisation is still in accordance with this Regulation. The Food Safety Authority may, where necessary, consult the applicant.
4. The appropriate authority must examine the opinion of the Food Safety Authority without delay and may prescribe amendments to the authorisation, including without limitation changes in the conditions of use and changes the restrictions attached to that authorisation.”.
Commencement Information
I46Reg. 46 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
47. In Article 9—
(a)in the heading, omit “Community”;
(b)for paragraph 1, substitute—
“1. The Food Safety Authority must establish and maintain a register of authorised recycling processes. The register must be made available to the public. Each entry in the register must include details of the restrictions or conditions prescribed in relation to the authorised recycling process.”;
(c)omit paragraph 2;
(d)in paragraph 3, for “6(3)”, substitute “ 6(1) ”.
Commencement Information
I47Reg. 47 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
48. For Article 10, substitute—
1. The official control of a recycling plant and converter must be performed in accordance with the rules laid down in Regulation (EC) No 882/2004 and must include in particular audits as control technique as specified in Article 10 of Regulation (EC) No 882/2004.
2. The official control must verify that the recycling process corresponds to the authorised process and that an effective quality assurance system in accordance with Regulation (EC) No 2023/2006 is in place.
3. The authorisation holder must notify the Food Safety Authority about the recycling or manufacturing site in which the authorised recycling process is being applied.”.
Commencement Information
I48Reg. 48 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
49. After Article 16, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I49Reg. 49 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
50. In Annex 1, in both places in which it occurs, for “EC Register”, substitute “ register ”.
Commencement Information
I50Reg. 50 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
51. Regulation 450/2009 is amended as follows.
Commencement Information
I51Reg. 51 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
52. In Article 1, omit “Community or national”.
Commencement Information
I52Reg. 52 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
53. In Article 2, omit “within the Community”.
Commencement Information
I53Reg. 53 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
54. In Article 3, after point (f), insert—
“(g)“the list” means the list referred to in Article 5.”.
Commencement Information
I54Reg. 54 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
55. In Chapter 2, in Section 1, in the heading, omit “Community”.
Commencement Information
I55Reg. 55 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
56. In Article 5—
(a)in paragraph 1—
(i)for “the ‘Community list’”, substitute “ the list ”;
(ii)omit “(hereinafter referred to as the ‘Community list’)”;
(b)in paragraph 2, in point (b), for “Community or national”, substitute “ retained EU law or any other enactment ”;
(c)in both places in which it occurs (including the heading), omit “Community”.
Commencement Information
I56Reg. 56 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
57. In Article 6, in both places in which it occurs (including the heading), omit “Community”.
Commencement Information
I57Reg. 57 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
58. In Article 7, in both places in which it occurs (including the heading), omit “Community”.
Commencement Information
I58Reg. 58 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
59. In Article 8—
(a)in each place in which it occurs (including the heading), omit “Community”;
(b)in both places in which it occurs, for “Commission”, substitute “ appropriate authority ”;
(c)in paragraph 2—
(i)for “European Food Safety Authority (the Authority)”, substitute “ Food Safety Authority ”;
(ii)in the second paragraph, for “Authority” substitute “ Food Safety Authority ”;
(d)in paragraph 5, in both places in which it occurs, for “Authority”, substitute “ Food Safety Authority ”;
(e)in paragraph 6, for “Authority”, substitute “ Food Safety Authority ”.
Commencement Information
I59Reg. 59 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
60. In Section 2, in the heading, omit “Community”.
Commencement Information
I60Reg. 60 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
61. In Article 9—
(a)in paragraph 1, for “the relevant Community and national provisions”, substitute “ retained EU law and any other enactment ”;
(b)in paragraph 2, omit “Community”;
(c)in paragraph 3—
(i)for “a specific Community or national measure on”, substitute, “retained EU law or any other enactment relating to”;
(ii)for “Community provisions”, substitute “ retained EU law ”.
Commencement Information
I61Reg. 61 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
62. In Article 13, omit “national”.
Commencement Information
I62Reg. 62 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
63. After Article 14, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I63Reg. 63 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
64. In Annex 2—
(a)in point 5, omit “Community”;
(b)in point 6—
(i)for “the Community or national provisions”, substitute “ retained EU law or any other enactment ”;
(ii)omit “Community”.
Commencement Information
I64Reg. 64 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
65. Regulation 10/2011 is amended as follows.
Commencement Information
I65Reg. 65 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
66. In Article 2—
(a)in paragraph 3, omit “EU or national”;
(b)in both places in which it occurs, omit “EU”.
Commencement Information
I66Reg. 66 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
67. In Article 5—
(a)in each place in which it occurs (including the heading), omit “Union”;
(b)for paragraph 3, substitute—
“3. The appropriate authority may prescribe amendments to the list.”.
Commencement Information
I67Reg. 67 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
68. Insert a new Article 5A—
1. Any power to make regulations under this Regulation—
(a)so far as exercisable by a Minister of the Crown, is exercisable by statutory instrument;
(b)so far as exercisable by the Welsh Ministers, is exercisable by statutory instrument;
F16(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. For regulations made under this Regulation by the Scottish Ministers, see also section 27 of the Interpretation and Legislative Reform (Scotland) Act 2010 M5 (Scottish statutory instruments).
3. Any power to make regulations under this Regulation includes power—
(a)to make different provision in relation to different cases or classes of case (including different provision for different areas or different classes of business); and
(b)to provide for such exceptions, limitations and conditions, and to make such supplementary, incidental, consequential or transitional provisions, as the appropriate authority considers necessary or expedient.
4. [F17Any statutory instrument or Scottish statutory instrument] containing regulations made under this Regulation is subject to annulment in pursuance of a resolution—
(a)in the case of England, of either House of Parliament;
(b)in the case of Wales, of [F18Senedd Cymru];
(c)in the case of Scotland, of the Scottish Parliament;
F19(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. In this Regulation, any power—
(a)of the Secretary of State to make regulations is limited to regulations which apply in relation to England only;
(b)of the Welsh Ministers to make regulations is limited to regulations which apply in relation to Wales only;
(c)of the Scottish Ministers to make regulations is limited to regulations which apply in relation to Scotland only;
F20(d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .”.
Textual Amendments
F16Words in reg. 68 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(7)(a)
F17Words in reg. 68 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(7)(b)(i)
F18Words in reg. 68 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(7)(b)(ii)
F19Words in reg. 68 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(7)(b)(iii)
F20Words in reg. 68 omitted (31.12.2020 immediately before IP completion day) by virtue of The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(7)(c)
Commencement Information
I68Reg. 68 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
69. In Article 6—
(a)in each place in which it appears (including the heading), omit “Union”;
(b)in paragraph 1, for “national law” substitute “ any relevant enactment ”;
(c)for paragraph 2, substitute—
“By way of derogation from Article 5, colorants and solvents which were capable of lawful use in the manufacture of plastic layers in plastic materials and articles prior to adoption of the list may continue to be so used subject to any relevant enactment.”.
Commencement Information
I69Reg. 69 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
70. For Article 7, substitute—
“1. The appropriate authority must regularly prescribe updates to the provisional list of additives that that was published by the European Commission in 2008.
2. An additive must be removed from the provisional list—
(a)when it is included in the list set out in Annex 1;
(b)when a decision is taken by the appropriate authority not to include it in the list; or
(c)if during the examination of the data, the appropriate authority calls for supplementary information and that information is not submitted within the time limits specified by the appropriate authority.”.
Commencement Information
I70Reg. 70 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
71. In Article 13, in both places in which it appears, omit “Union”.
Commencement Information
I71Reg. 71 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
72. In Article 14—
(a)in each place in which it appears, omit “Union”;
(b)omit paragraph 6.
Commencement Information
I72Reg. 72 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
73. In Article 16, in paragraph 1, omit “national”.
Commencement Information
I73Reg. 73 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
74. In Article 19, in the heading, omit “Union”.
Commencement Information
I74Reg. 74 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
75. After Article 23, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I75Reg. 75 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
76. In Annex 1, in the opening words of point 1, omit “Union”.
Commencement Information
I76Reg. 76 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
77. In Annex 4, at paragraph 7, omit “relevant EU provisions or, in their absence, with national”.
Commencement Information
I77Reg. 77 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
78. Regulation 2018/213 is amended as follows.
Commencement Information
I78Reg. 78 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
79. In Article 4(3), omit “national”.
Commencement Information
I79Reg. 79 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
80. After Article 7, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
Commencement Information
I80Reg. 80 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Signed by authority of the Secretary of State for Health and Social Care.
Stephen Hammond
Minister of State
Department of Health and Social Care
Regulation 10
Commencement Information
I81Sch. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Regulation 10
1. Test liquid
4 % (v/v) acetic acid, in a freshly prepared aqueous solution.
2. Test conditions
(a)Carry out the test at a temperature of 22 ± 2 °C for a duration of 24 ± 0,5 hours.
(b)When the migration of lead is to be determined, cover the sample by an appropriate means of protection and expose it to the usual lighting conditions in a laboratory. When the migration of cadmium or of lead and cadmium is to be determined, cover the sample so as to ensure that the surface to be tested is kept in total darkness.
3. Filling
(a)Samples which can be filled—
Fill the article with a 4 % (v/v) acetic acid solution to a level no more than1 mm from the overflow point; the distance is measured from the upper rimof the sample. Samples with a flat or slightly sloping rim should be filled so that the distance between the surface of the liquid and the overflow point is no more than 6 mm measured along the sloping rim.
(b)Samples which cannot be filled—
The surface of the sample which is not intended to come into contact with foodstuffs is first covered with a suitable protective layer able to resist the action of the 4 % (v/v) acetic acid solution. The sample is then immersed in a recipient containing a known volume of acetic acid solution in such a way that the surface intended to come into contact with foodstuffs is completely covered by the test liquid.
4. Determination of the surface area
The surface area of the articles in Category 1 is equal to the surface area of the meniscus formed by the free liquid surface obtained by complying with the filling requirements set out in paragraph 3 above.”
Regulation 10
Commencement Information
I82Sch. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Regulation 10
1. Object and field of application
The method allows the specific migration of lead and/or cadmium to be determined.
2. Principle
The determination of the specific migration of lead and/or cadmium is carried out by an instrumental method of analysis that fulfils the performance criteria of paragraph 4.
3. Reagents
All reagents must be of analytical quality, unless otherwise specified.
Where reference is made to water, it means distilled water or water of equivalent quality.
(a)4 % (v/v) acetic acid, in aqueous solution.
Add 40 ml of glacial acetic acid to water and make up to 1 000 ml.
(b)Stock solutions
Prepare stock solutions containing 1 000 mg/litre of lead and at least 500 mg/litre of cadmium respectively in a 4 % acetic acid solution, as referred to in paragraph (a).
4. Performance criteria of the instrumental method of analysis
(a)The detection limit for lead and cadmium must be equal to or lower than— 0,1 mg/litre for lead; 0,01 mg/litre for cadmium.
The detection limit is defined as the concentration of the element in the 4 % acetic acid solution, as referred to in paragraph 3(a) which gives a signal equal to twice the background noise of the instrument.
(b)The limit of quantification for lead and cadmium must be equal to or lower than— 0,2 mg/litre for lead; 0,02 mg/litre for cadmium.
(c)Recovery. The recovery of lead and cadmium added to the 4 % acetic acid solution, as referred to in point 3(a), must lie within 80-120 % of the added amount.
(d)Specificity. The instrumental method of analysis used must be free from matrix and spectral interferences.
5. Method
(a)Preparation of the sample
The sample must be clean and free from grease or other matter likely to affect the test.
Wash the sample in a solution containing a household liquid detergent at a temperature of approximately 40 °C. Rinse the sample first in tap water and then in distilled water or water of equivalent quality. Drain and dry so as to avoid any stain. The surface to be tested is not to be handled after it has been cleaned.
(b)Determination of lead and/or cadmium
The sample thus prepared is tested under the conditions laid down in Schedule 2.
Before taking the test solution for determining lead and/or cadmium, homogenise the content of the sample by an appropriate method, which avoids any loss of solution or abrasion of the surface being tested.
Carry out a blank test on the reagent used for each series of determinations.
Carry out determinations for lead and/or cadmium under appropriate conditions.”
Regulation 10
Commencement Information
I83Sch. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Regulation 10A
1. The written declaration referred to in regulation 10A must contain the following information—
(a)the identity and address of the company which manufactures the finished ceramic article and of the importer who imports it into [F21Great Britain];
(b)the identity of the ceramic article;
(c)the date of the declaration;
(d)the confirmation that the ceramic article meets relevant requirements in these Regulations and Regulation 1935/2004.
2. The written declaration must permit an easy identification of the goods for which it is issued and must be renewed when substantial changes in the production bring about changes in the migration of lead or cadmium or both.”
Textual Amendments
F21Words in Sch. 3 substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 16(8)
(This note is not part of the Regulations)
These Regulations are made in exercise of the powers conferred by section 8(1) of the European Union (Withdrawal) Act 2018 (c.16) in order to address failures of retained EU law to operate effectively and other deficiencies arising from the withdrawal of the United Kingdom from the European Union. In particular, the Regulations address the deficiency specified in section 8(2)(b) of that Act, namely the conferral of functions by retained EU law on, or in relation to, EU entities which no longer have functions in that respect under EU law in relation to the United Kingdom.
These Regulations make amendments to legislation relating to the safety of food contact materials. Part 2 amends subordinate legislation in England and Part 3 amends retained direct EU legislation for the whole of the United Kingdom.
An impact assessment has not been produced for this instrument as no, or no significant, impact on the public, private or voluntary sector is foreseen.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: