- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
11.—(1) A qualifying action is a measure which satisfies Condition A, B or C in this article.
(2) Condition A is that the Administrator is satisfied that the measure—
(a)meets the requirements of article 12 (general requirements);
(b)meets the condition—
(i)in any one of articles 13 to 21 (ECO4 project measures); or
(ii)in article 22 or 23 (in-fill measures);
(c)where it is a heating measure—
(i)other than where it is a measure falling within sub-paragraph (b)(ii), meets the minimum insulation requirement in article 24 or 25; and
(ii)meets the requirements of article 26 (additional requirements to be met by heating measures);
(d)meets the requirements of article 31 (installation standards, consumer protection and smart meter advice); and
(e)is notified to the Administrator in accordance with article 43.
(3) Condition B (which relates to ECO3 interim delivery actions) is that the Administrator is satisfied that the measure—
(a)is completed on or after 1st April 2022 and before 1st July 2022;
(b)meets the requirements set out in article 13(1)(a), (b), (d), (e) and (g) of the 2018 Order;
(c)meets the requirements of article 31(1)(b) or (c);
(d)is not—
(i)a demonstration action;
(ii)the installation of equipment for the generation of heat wholly or partly from biofuel, oil or liquefied petroleum gas, unless the measure is a repair;
(iii)the installation of a connection to a district heating system that delivers heat generated wholly or partly from biofuel, oil or liquefied petroleum gas; or
(iv)a repair other than—
(aa)a repair of a renewable heating system;
(bb)a repair of an efficient boiler or an efficient electric storage heater; or
(cc)a repair of equipment for the generation of heat wholly or partly from biofuel, oil or liquefied petroleum gas; and
(e)is notified to the Administrator in accordance with article 43.
(4) Condition C is that the measure is a surplus action.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: