- Latest available (Revised) - English
- Latest available (Revised) - Welsh
- Original (As made) - English
- Original (As made) - Welsh
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
1. The title of these Regulations is the Plastic Materials and Articles in Contact with Food (Wales) Regulations 2006, they apply in relation to Wales and come into force on 19 November 2006.
2.—(1) In these Regulations —
“the Act” (“y Ddeddf”) means the Food Safety Act 1990;
“authorised officer” (“swyddog awdurdodedig”) means any person, whether or not an officer of the enforcement authority, who is authorised by it in writing to act in matters arising under these Regulations;
“BADGE” (“BADGE”) has the meaning given in Article 1(1)(a) of Regulation 1895/2005;
“BFDGE” (“BFDGE”) has the meaning given in Article 1(1)(b) of Regulation 1895/2005;
“business” (“busnes”) is to be construed in accordance with section 1(3) of the Act;
“capable” (“yn gallu”) means capable as established under regulation 11;
“Directive 82/711” (“Cyfarwyddeb 82/711”) means Council Directive 82/711/EEC(1) laying down the basic rules necessary for testing migration of the constituents of plastic materials and articles intended to come into contact with foodstuffs, as last amended by Commission Directive 97/48/EC(2);
“Directive 85/572” (“Cyfarwyddeb 85/572”) means Council Directive 85/572/EEC laying down the list of simulants to be used for testing migration of constituents of plastic materials and articles intended to come into contact with foodstuffs(3);
“Directive 88/388” (“Cyfarwyddeb 88/388”) means Council Directive 88/388/EEC on the approximation of the laws of the Member States relating to flavourings for use in foodstuffs and to source materials for their production(4);
“Directive 89/107” (“Cyfarwyddeb 89/107”) means Council Directive 89/107/EEC on the approximation of the laws of the Member States concerning food additives authorised in foodstuffs intended for human consumption(5);
“the Directive” (“y Gyfarwyddeb”) means Commission Directive 2002/72/EC(6) relating to plastic materials and articles intended to come into contact with foodstuffs, as last amended by Commission Directive 2004/19/EC(7) and Commission Directive 2005/79/EC(8);
“EEA State” (“Gwladwriaeth AEE”) means a member State (other than the United Kingdom), Norway, Iceland and Liechtenstein;
“EFSA” (“EFSA”) means the European Food Safety Authority;
“enforcement authority” (“awdurdod gorfodi”) means an authority having responsibility under regulation 14 for executing and enforcing these Regulations;
“food” (“ bwyd”) is to be construed in accordance with section 16(5) of the Act;
“good technical quality” (“ansawdd technegol da”) means good technical quality as regards the purity criteria;
“handling of food” (“trin bwyd”) means use in connection with the storage, preparation, packaging, sale or serving of food;
“import” (“mewnforio”) means import in the course of a business;
“material or article” (“deunydd neu eitem”) means a material or article falling within the definition of materials and articles in Article 1(2) of Regulation 1895/2005;
“monomer” (“monomer”) means any substance that is included for the purposes of the Directive among monomers and other starting substances;
“NOGE” (“NOGE”) has the meaning given in Article 1(1)(c) of Regulation 1895/2005;
“the 1998 Regulations” (“Rheoliadau 1998”) means the Plastic Materials and Articles in Contact with Food Regulations 1998(9);
“the 2005 Regulations” (“Rheoliadau 2005”) means the Materials and Articles in Contact with Food (Wales) Regulations 2005(10);
“plastic material or article” (“ deunydd neu eitem plastig”) means anything which for the purposes of the Directive is included among those plastic materials and articles and parts thereof to which the Directive applies;
“the Purity Directives” (“ y Cyfarwyddebau Purdeb”) means Commission Directive 95/31/EC laying down specific criteria of purity concerning sweeteners for use in foodstuffs(11), Commission Directive 95/45/EC laying down purity criteria concerning colours for use in foodstuffs(12) and Commission Directive 96/77/EC laying down specific purity criteria for food additives other than colours or sweeteners(13);
“Regulation 1895/2005” (“Rheoliad 1895/2005”) means Commission Regulation (EC) No 1895/2005 on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food(14);
“sell” (“gwerthu”) includes offer or expose for sale or have in possession for sale, and “sale” (“gwerthiant”) is construed accordingly;
(2) For the purposes of these Regulations the supply otherwise than on sale, in the course of a business, of any material or article is deemed to be a sale.
(3) Any other expression used in these Regulations and in the Directive, Directive 82/711, Directive 85/572 or Regulation 1895/2005 bears the same meaning in these Regulations as it bears in that Directive or Regulation.
(4) Except in Part 5 of Schedule 3, any reference to a numbered Annex is a reference to that Annex to the Directive.
3.—(1) No person may —
(a)use for the handling of food in the course of a business;
(b)sell for the purpose of handling of food; or
(c)import from anywhere other than an EEA State for the purpose of handling of food,
a plastic material or article which fails to meet the required standard.
(2) For the purposes of this regulation a plastic material or article fails to meet the required standard if —
(a)it has been manufactured with a prohibited monomer as described in regulation 4(2) or a prohibited additive as described in regulation 5(2); or
(b)it does not meet the required standards set out in regulation 6, 7, 8, 9 or 10.
4.—(1) Subject to paragraphs (3), (4) and (5), no person may use any prohibited monomer in the manufacture of any plastic material or article.
(2) A prohibited monomer is any monomer which is not —
(a)of good technical quality;
(b)identified by PM/REF No., CAS No. (if any) and name in columns 1, 2 and 3 respectively of Sections A or B of Annex II; and
(c)used in accordance with any restrictions and specifications for that monomer set out or referred to in column 4 of those sections.
(3) Paragraph (1) does not apply to the use of a monomer in the manufacture of any —
(a)surface coatings obtained from resinous or polymerised products in liquid, powder or dispersion form, including but not limited to varnishes, lacquers and paints;
(b)epoxy resins;
(c)adhesives and adhesion promoters; or
(d)printing inks.
(4) Paragraph (1) must not be taken to prohibit the manufacture of any plastic material or article with any substance if the substance in question is a mixture which falls within paragraph 3(c) (relating to mixtures of authorised substances) of Annex II and is of good technical quality.
(5) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with paragraph (1) because it was manufactured with any monomer (whether or not of good technical quality) other than one mentioned in paragraph (2)(b) it is a defence for the person accused to prove that each such monomer —
(a)is present in the finished plastic material as an impurity, a reaction intermediate or a decomposition product which falls within paragraph 3(a) of Annex II, or
(b)is an oligomer or a natural or synthetic macromolecular substance or a mixture thereof which falls within paragraph 3(b) of that Annex,
and is of good technical quality.
(6) Schedule 1 has effect to supplement this regulation.
5.—(1) Subject to paragraph (3) no person may use in the manufacture of any plastic material or article any prohibited additive.
(2) A prohibited additive is —
(a)any additive identified by PM/REF No., CAS No. (if any) and name in columns 1, 2 and 3 respectively of Section A or B of Annex III which —
(i)is not of good technical quality, or
(ii)is not used in accordance with any restrictions and specifications for that additive set out in the corresponding entry in column 4 of Section A or B of that Annex; or
(b)any food additive authorised by Directive 89/107 or any flavouring authorised by Directive 88/388 that migrates into food —
(i)in a quantity that has a technological function in the final food product, or
(ii)where the food is of a type for which the use of any such food additive or flavouring is so authorised, in quantities exceeding the limits provided for in Directive 89/107 or Directive 88/388 as appropriate, or in Annex III, whichever is the lower.
(3) In any proceedings for an offence under these Regulations where it is alleged that the commission of the offence is due to the manufacture of a plastic material or article with any additive identified in Section A or B of Annex III which is not of good technical quality, it is a defence for the person accused to prove that each such additive is present in the finished plastic material or article as an impurity, a reaction intermediate or a decomposition product.
(4) Schedule 1 has effect to supplement this regulation.
6.—(1) Subject to paragraph (2), where a migration limit expressed in mg/kg is indicated in column 4 of the relevant section of Section A or B of Annex II in relation to any monomer, a plastic material or article manufactured from that monomer meets the required standard under this regulation if it is not capable of transferring constituents of that monomer to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit, and for the purposes of this paragraph the appropriate limit is —
(a)the number of milligrams expressed in column 4 released per kilogram of food in the case of any plastic material or article other than one specified in sub-paragraph (b); and
(b)one sixth of the number of milligrams expressed in column 4 per square decimetre of surface area of the plastic material or article if the plastic material or article comprises —
(i)an article which is a container or is comparable to a container or can be filled, having a capacity of less than 500 millilitres or more than 10 litres, or
(ii)sheet, film or other plastic material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of the material or article in question and the quantity of food in contact with that surface area.
(2) A plastic material or article manufactured from any monomer for which a migration limit in mg/kg is expressed in column 4 of Section A or B of Annex II is not deemed to be capable of transferring constituents of that monomer to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit in paragraph (1) if the only food with which that plastic material or article may come into contact is food to which regulation 9(3) applies.
7.—(1) Subject to paragraph (2), where a migration limit expressed in mg/kg is indicated in column 4 of Section A or B of Annex III in relation to any additive, a plastic material or article manufactured containing that additive meets the required standard under this regulation if it is not capable of transferring constituents of that additive to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit, and for the purposes of this paragraph the appropriate limit is —
(a)the number of milligrams indicated in column 4 released per kilogram of food in the case of any plastic material or article other than one specified in sub-paragraph (b); and
(b)one sixth of the number of milligrams expressed in column 4 per square decimetre of surface area of the plastic material or article if the plastic material or article comprises —
(i)an article which is a container or is comparable to a container or can be filled, having a capacity of less than 500 millilitres or more than 10 litres, or
(ii)sheet, film or other plastic material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of the material or article in question and the quantity of food in contact with that surface area.
(2) A plastic material or article manufactured containing an additive for which a migration limit in mg/kg is expressed in column 4 is not deemed to be capable of transferring constituents of that additive to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit in paragraph (1) if the only food with which that plastic material or article may come into contact is food to which regulation 9(3) applies.
8. A product obtained by bacterial fermentation meets the required standard under this regulation if it is —
(a)of good technical quality;
(b)identified by PM/REF No., CAS No. and name in columns 1, 2 and 3 respectively of Annex IV; and
(c)in compliance with the restrictions and specifications set out in column 4 of that Annex.
9.—(1) Subject to paragraph (3), a plastic material or article meets the required standard under this regulation if it is not capable of transferring its constituents to food with which it may come into contact in quantities exceeding the appropriate limit specified in paragraph (2).
(2) (a) In the case of any plastic material or article comprising —
(i)an article which is a container or comparable to a container or can be filled, with a capacity of not less than 500 millilitres and not more than 10 litres,
(ii)an article which can be filled and for which it is impracticable to estimate the surface area in contact with food, or
(iii)a cap, gasket, stopper or similar device for sealing,
the appropriate limit is an overall migration limit of 60 milligrams of constituents released per kilogram of food.
(b)In the case of any other plastic material or article, the appropriate limit is an overall migration limit of 10 milligrams per square decimetre of the surface area of the plastic material or article.
(3) For the purposes of this regulation a plastic material or article is not deemed to fail to meet the required standard under paragraph (1) if the only food with which that material or article may come into contact is food —
(a)which is specified in the table to Part 4 of Schedule 3; and
(b)where there is no “X” placed anywhere in the group of columns headed “Simulants to be used” opposite that food.
(4) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with this regulation, the defences available in paragraph 6(2) and 7(2) of Schedule 2 are available as specified in those paragraphs.
10.—(1) Subject to paragraph (3), a plastic material or article manufactured using isocyanates or colourants prepared by diazo-coupling meets the required standard under this regulation if it is not capable of transferring in a detectable quantity primary aromatic amines (expressed as aniline), not being primary aromatic amines listed in the Directive, to food with which that plastic material or article may come into contact.
(2) Part B of Annex V has effect for the purpose of prescribing, for certain items listed in Section A or B of Annex II, Section A or B of Annex III, or Annex IV, the specifications for those items that are referred to in column 4 of the Annex or Section of the Annex concerned.
(3) In paragraph (1) a detectable quantity means a quantity which can be determined with an analytical method capable of achieving a detection limit of at least 0.02 milligrams per kilogram of food or food simulant (including analytical tolerance).
11.—(1) A plastic material or article is treated as capable of transferring constituents to food with which it may come into contact to the extent that such capability is established —
(a)in any case other than one to which sub-paragraph (b) applies, and subject to Article 8.4 of the Directive (which may be applied on compliance with the conditions stated therein), by the verification methods specified in Schedule 2 (including the analytical tolerances referred to in paragraph 8 of that Schedule) and Schedule 3;
(b)in any case where the extent to which vinyl chloride, as identified in Section A of Annex II, is capable of such transfer falls to be established, by the method referred to in regulation 7(2) of the 2005 Regulations.
(2) In Schedules 2 and 3, references to migration or release of a substance are to be construed as references to the transfer of constituents to the simulant representing the food or, as the case may be, food with which it may come into contact.
(3) The specific migration of a constituent from a plastic material or article is where applicable to be determined in the manner specified in the relevant sub-paragraph of paragraph 8 of Annex II.
(4) The quantity of a constituent in a plastic material or article is where applicable to be determined in the manner specified in the sub-paragraph of paragraph 8 of Annex II relating to the term “QM(T)”, “QMA” or “QMA(T)” as the case may be.
12.—(1) At marketing stages other than the retail stage a person who is in possession of any plastic material or article must ensure that the plastic material or article is accompanied by a written declaration which —
(a)accords with the requirements of Article 16(1) of Regulation (EC) No. 1935/2004 of the European Parliament and of the Council(15); and
(b)provides, in respect of substances that are subject to a restriction on quantities migrating into food, information obtained from experimental data or theoretical calculation concerning —
(i)the levels of migration specific to those substances;
(ii)where appropriate, purity criteria in accordance with the purity Directives.
(2) In establishing which descriptions of food a material or article may come into contact with, it is to be assumed until the contrary is proved that, for the purposes of these Regulations, if particulars are shown in relation to that material or article in accordance with paragraph (1)(a), those particulars are accurate and that unless the particulars so indicate, there are no restrictions on the intended conditions of contact.
13.—(1) In this regulation —
(a)any reference to a numbered Article is a reference to that Article in Regulation1895/2005;
(b)paragraphs (2) to (5) are subject to Article 1(3) (exception relating to certain storage containers and pipelines);
(c)for the purpose of Article 6(4) the competent authority is the authority identified in regulation 14.
(2) Subject to Article 6(1), (2) (transitional provisions) and (4) (labelling requirements), no person may —
(a)manufacture,
(b)use for the handling of food in the course of a business,
(c)sell for the purpose of the handling of food, or
(d)import for the purpose of the handling of food
any material or article in contravention of Article 3 or Article 4 (prohibitions relating to BFDGE and NOGE respectively).
(3) No person may manufacture any material or article in such a way as to contravene the requirements of Article 2 (controls on the migration of BADGE from materials and articles).
(4) Subject to Article 6(1), no person may —
(a)use for the handling of food in the course of a business,
(b)sell for the purpose of the handling of food, or
(c)import for the purpose of the handling of food
any material or article that has been manufactured in such a way as to contravene the requirements of Article 2.
(5) Subject to Article 6(3) (transitional provisions relating to materials and articles brought into contact with food before 1 January 2007), no person may contravene or fail to comply with the requirements of Article 5 (obligations regarding the provision of a written statement when marketing materials or articles containing BADGE or its derivatives).
(6) No person may without reasonable excuse fail to comply with a request made under Article 6(4) (requirement to disclose date of filling to competent authority).
14. Each food authority in its area and each port health authority in its district must execute and enforce —
(a)the provisions of Regulation 1895/2005 mentioned in regulation 13, and
(b)these Regulations.
15.—(1) Any person who —
(a)contravenes or fails to comply with regulation 3(1), 4(1), 5(1), 12(1) or 13(2) to (5);
(b)intentionally obstructs any person acting in the execution of Regulation 1895/2005 or these Regulations;
(c)contravenes regulation 13(6) or 17(3) or, without reasonable excuse, otherwise fails to give to any person acting in the execution of Regulation 1895/2005 or these Regulations any assistance or information which that person may reasonably require; or
(d)in purported compliance with any requirement mentioned in sub-paragraph (c), knowingly or recklessly supplies information that is false or misleading in any material particular, is guilty of an offence.
(2) Anyone convicted of an offence under these Regulations is liable —
(a)in the case of an offence under paragraph (1)(a) —
(i)on conviction on indictment to a term of imprisonment not exceeding two years or to a fine or both;
(ii)on summary conviction to a term of imprisonment not exceeding six months or to a fine not exceeding the statutory maximum or both;
(b)in the case of any other offence under these Regulations to a term of imprisonment not exceeding three months or to a fine not exceeding level five on the standard scale or both.
(3) Nothing in paragraph (1)(c) is to be construed as requiring any person to answer any question or give any information if to do so might incriminate him or her.
(4) Where an offence under these Regulations which has been committed by a body corporate or a Scottish partnership is proved to have been committed with the consent or connivance of or to be attributable to any neglect on the part of —
(a)any director, manager, secretary or other similar officer of the body corporate or any partner of the Scottish partnership, or
(b)any person purporting to act in such a capacity,
that person as well as the body corporate or, as the case may be, the Scottish partnership, is deemed to be guilty of that offence and liable to be proceeded against and punished accordingly.
(5) No prosecution for an offence under these Regulations is to be begun after the expiry of three years from the commission of the offence or one year from its discovery by the prosecutor, whichever is the earlier.
(6) Where the commission by any person of an offence under these Regulations is due to the act or default of some other person, that other person is also guilty of the offence; and a person may be charged with and convicted of the offence whether or not proceedings are taken against the first mentioned person.
16.—(1) In any proceedings for an offence under these Regulations it is, subject to paragraph (5), a defence for the person accused to prove that he or she took all reasonable precautions and exercised all due diligence to avoid the commission of the offence by him or herself or by a person under his or her control.
(2) Without prejudice to the generality of paragraph (1), a person accused of an offence under these Regulations who did not —
(a)prepare the plastic material or article or, as the case may be, the material or article in respect of which the offence is alleged to have been committed; nor
(b)import it into the United Kingdom,
is taken to have established the defence provided by paragraph (1) if he or she satisfies the requirements of paragraphs (3) and (4).
(3) A person satisfies the requirements of this paragraph if he or she proves —
(a)that the commission of the offence was due to the act or default of some other person who was not under his or her control, or to reliance on information supplied by such a person;
(b)that either —
(i)he or she carried out all such checks of the plastic material or article or material or article in question as were reasonable in all the circumstances, or
(ii)it was reasonable in all the circumstances for him or her to rely on checks carried out by the person who supplied him or her with the plastic material or article or the material or article in question; and
(c)that he or she did not know and had no reason to suspect at the time the offence was committed that his or her act or omission would amount to an offence under these Regulations.
(4) A person satisfies the requirements of this paragraph if the offence is one of sale and he or she proves —
(a)that the commission of the offence was due to the act or default of some other person who was not under his or her control, or to reasonable reliance on information supplied by such a person;
(b)that the sale of which the alleged offence consisted was not a sale under his or her name or mark; and
(c)that he or she did not know and could not reasonably have been expected to know at the time the offence was committed that his or her act or omission would amount to an offence under these Regulations.
(5) If in any case the defence provided by this regulation involves the allegation that the commission of the offence was due to the act or default of another person, or to reliance on information supplied by another person, the person accused is not without leave of the court entitled to rely on that defence unless —
(a)at least seven clear days before the hearing; and
(b)where he or she has previously appeared before the court in connection with the alleged offence, within one month of his or her first such appearance,
he or she has served on the prosecutor a written notice giving such information identifying or assisting in the identification of that other person as was then in his or her possession.
17.—(1) In any proceedings for an offence under regulation 3 concerning the sale of a glass jar—
(a)which contains
(i)infant formula or follow-on formula as defined by Commission Directive 91/321/EC(16), or
(ii)processed cereal-based foods or baby foods for infants and young children as defined by Commission Directive 96/5/EC(17), and
(b)the lid of which is sealed by means of a PVC gasket containing epoxidised soybean oil having PM/Ref No.88640 in Section A of Annex III,
it is a defence to prove the matters set out in paragraph (2)
(2) The matters to be proved are that —
(a)the glass jar was filled and sealed before 19th November 2006;
(b)the date of filling or a coded indication of that date was present on the jar or its lid at the time of sale; and
(c)the labelling or marking with the particulars mentioned in sub-paragraph (b) at the time of sale complied with the requirements relating to durability in Article 2.1(a) of Directive 2000/13/EC of the European Parliament and of the Council(18).
(3) No person may without reasonable excuse fail to comply with a request made by the enforcement authority to disclose the date signified by the coded indication mentioned in paragraph (2)(b).
18.—(1) Notwithstanding the revocations made in regulation 25, in relation to any plastic material or article —
(a)manufactured before the 1 July 1998, the defence in regulation 3(3) of the 1998 Regulations;
(b)manufactured or imported into the European Community before 1 January 2003, the defence in regulation 10(15) of the 1998 Regulations;
(c)put into free circulation in the European Community before 30 November 2002, the defence in regulation 10(16) of the 1998 Regulations;
(d)manufactured or imported into the European Community before 1 March 2004, the defence in regulation 10(21)(a) of the 1998 Regulations;
(e)manufactured or imported into the European Community before 1 March 2003, the defence in regulation 10(21)(b) of the 1998 Regulations;
(f)containing azodicarbonamide and brought into contact with food before 2 August 2005, the defence in regulation 10(23) of the 1998 Regulations; or
(g)manufactured or imported into the European Community before 1 March 2006, the defence in regulation 10(25) of the 1998 Regulations,
apply in relation to offences under these Regulations in like manner as it applied to offences under the equivalent provisions in those Regulations.
(2) In any proceedings for an offence under these Regulations other than an offence mentioned in regulation 17(1), it is a defence to prove —
(a)that the act constituting the alleged offence was committed in relation to a plastic material or article which was manufactured or imported into the European Community before 19 November 2007; and
(b)that the matter constituting the alleged offence would not otherwise have constituted an offence under these Regulations if the amendments to the Directive made by Commission Directive 2005/79/EC had not been implemented in Wales at the time the matter occurred.
19.—(1) An authorised officer who has procured a sample under section 29 of the Act and who considers it should be analysed must divide the sample into three parts.
(2) If the sample consists of sealed containers and opening them would, in the opinion of the authorised officer, impede a proper analysis, the authorised officer must divide the sample into parts by putting the containers into three lots, and each lot is treated as being a part.
(3) The authorised officer must—
(a)if necessary place each part in a suitable container and seal it;
(b)mark each part or container;
(c)as soon as reasonably practicable, give one part to the owner and notify him or her in writing that the sample will be analysed;
(d)submit one part for analysis in accordance with section 30 of the Act; and
(e)retain one part for future submission under regulation 20.
20.—(1) Where a sample has been retained under regulation 19 and —
(a)proceedings are intended to be or have been commenced against a person for an offence under these Regulations; and
(b)the prosecution intends to adduce as evidence the result of the analysis mentioned above,
paragraphs (2) to (7) apply.
(2) The authorised officer —
(a)may of his or her own volition;
(b)must if requested by the prosecutor (if a person other than the authorised officer);
(c)must if the court so orders; or
(d)must (subject to paragraph (6)) if requested by the defendant,
send the retained part of the sample to the Government Chemist for analysis.
(3) The Government Chemist must analyse the part sent to him or her under paragraph (2) and send to the authorised officer a certificate of analysis.
(4) Any certificate of the results of testing transmitted by the Government Chemist under this regulation is signed by or on behalf of him or her , but the testing may be carried out by any person under the direction of the person who signs the certificate.
(5) The authorised officer must immediately on receipt supply the prosecutor (if a person other than the authorised officer) and the defendant with a copy of the Government Chemist’s certificate of analysis.
(6) Where a request is made under paragraph (2)(d) the authorised officer may give notice in writing to the defendant requesting payment of a fee specified in the notice to defray some or all of the Government Chemist’s charges for performing the functions under paragraph (3), and in the absence of agreement by the defendant to pay the fee specified in the notice the authorised officer may refuse to comply with the request.
(7) In this regulation “defendant” includes a prospective defendant.
21.—(1) This regulation applies where a person wishes to make an application for the inclusion of an eligible additive in the Community list referred to in Article 4 of the Directive.
(2) The application mentioned in paragraph (1), including supporting data, must be made to EFSA before 1 January 2007.
(3) If during examination of the data referred to in paragraph (2), EFSA calls for supplementary information, the eligible additive may, if otherwise permitted to be used under the law of England and Wales, continue to be so used until EFSA has issued an opinion, provided the supplementary information is submitted within the time limits specified by EFSA.
(4) For the purposes of this regulation, an eligible additive is one whose use is permitted in one or more Member States before 1 January 2007.
22. The following provisions of the Act apply for the purposes of these Regulations as they apply for the purposes of the Act —
(a)section 3 (presumption that food is intended for human consumption);
(b)section 30(8) (relating to documentary evidence);
(c)section 44 (protection of officers acting in good faith).
23. In the Food Safety (Sampling and Qualifications) Regulations 1990(19), in Schedule 1 (provisions to which those Regulations do not apply) for the title and reference of the 1998 Regulations substitute the title and reference of these Regulations.
24.—(1) The 2005 Regulations are amended in accordance with paragraphs (2) to (4).
(2) In regulation 2(1) —
(a)In the appropriate place in alphabetical order insert the following definition—
““Directive 2002/72/EC” (“Cyfarwyddeb 2002/72/EC”) means Commission Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs(20), as last amended by Commission Directive 2005/79/EC(21)”;
(b)In the appropriate place in alphabetical order insert the following definition—
““the 2006 Regulations” (“Rheoliadau 2006”) means the Plastic Materials and Articles in Contact with Food (Wales) Regulations 2006(22).”
(3) In regulation 8 —
(a)at the beginning of paragraph (2) add the expression “Except in paragraph (4),”:
(b)for paragraph (4) substitute the following paragraph —
“(4) No person may manufacture any coating to be applied to film referred to in paragraph (3)(b) using any substance or group of substances except those listed in Annexes II, III or IV to Directive 2002/72/EC and other than in accordance with the appropriate requirements, restrictions and specifications contained in those Annexes and in the 2006 Regulations.”.
(4) In regulation 9 —
(a)in paragraph (3), for the expression “in Part I of Schedule 1 to the 1998 Regulations” substitute “in Section A or B of Annex II to Directive 2002/72/EC”;
(b)in sub-paragraph (b) of paragraph (3), for the expression “that Part as read with Part II of that Schedule.” substitute “those Sections as read with the general introduction to that Annex.”;
(c)in paragraph (5), for the expression “Schedules 3 and 4” substitute “Schedules 2 and 3”.
25. The following Regulations or parts thereof are revoked —
(a)the 1998 Regulations in so far as they apply in relation to Wales;
(b)the Plastic Materials and Articles in Contact with Food (Amendment) (Wales) Regulations 2001(23);
(c)the Plastic Materials and Articles in Contact with Food (Amendment) (Wales) Regulations 2002(24);
(d)the Plastic Materials and Articles in Contact with Food (Amendment) (Wales) Regulations 2003(25);
(e)the Plastic Materials and Articles in Contact with Food (Amendment) (Wales) Regulations 2005(26);
(f)the Plastic Materials and Articles in Contact with Food (Amendment) (No.2) (Wales) Regulations 2005(27);
(g)regulation 15 of the 2005 Regulations.
Signed on behalf of the National Assembly for Wales under section 66(1) of the Government of Wales Act 1998(28).
D. Elis-Thomas
The Presiding Officer of the National Assembly
14 November 2006
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area. The revised version is currently only available in English.
Original (As Enacted or Made) - English: The original English language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Original (As Enacted or Made) - Welsh:The original Welsh language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: