Search Legislation

The Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: The Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009 (Schedules only)

 Help about opening options

Version Superseded: 22/04/2011

Alternative versions:

Status:

Point in time view as at 07/03/2009.

Changes to legislation:

There are currently no known outstanding effects for the The Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulations 4 and 5

SCHEDULE 1E+WSupplementary provisions relating to Annexes II and III

1.  In Sections A and B of Annexes II and III (for the purposes of this Schedule referred to together as “the Annexes”) —E+W

(a)the PM/REF number. of any substance is its EEC packaging material reference number;

(b)the CAS number of any substance is its CAS (Chemical Abstracts Service) Registry Number;

(c)the name of any substance is its chemical name, and to the extent that there is any inconsistency between the CAS number and the name, the name will take precedence over the CAS number; and

(d)references to specific migration are to be taken to mean specific migration as measured in accordance with Schedules 2 and 3.

2.  If a substance appearing in the Annexes as an individual compound also falls within a generic term which appears therein, any restriction applying to that substance shall be that indicated for the individual compound and the entry applying to the generic term will be treated as varied to such extent as is necessary.E+W

3.—(1) The items identified in Section A or B of Annex II will be taken to include —E+W

(a)substances undergoing polymerisation (including polycondensation, polyaddition or any other similar process) to manufacture macromolecules;

(b)natural or synthetic macromolecular substances used in the manufacture of modified macromolecules, if the monomers required to synthesise them are not so identified; and

(c)substances used to modify existing natural or synthetic macromolecular substances.

(2) Salts (including double salts and acid salts) of aluminium, ammonium, calcium, iron, magnesium, potassium and sodium of authorised acids, phenols or alcohols are not included in the lists in the Annexes even if they are authorised and intentionally used; however names containing “....................acid(s), salts” do appear in the lists if the corresponding free acid(s) is or are not mentioned.

(3) Salts (including double salts and acid salts) of zinc of authorised acids, phenols or alcohols are not included in the lists in the Annexes even if they are authorised and intentionally used. For these salts a Group SML = 25/mg/kg (expressed as Zn) applies. The same restriction for Zn applies to —

(a)substances whose name contains “....................acid(s), salts” which appear in the lists, if the corresponding free acid(s) is or are not mentioned; and

(b)substances referred to in note 38 of Annex VI.

4.  In the case of substances listed in Section B of Annex III, the specific migration limits specified in column 4 will have effect where the verification of compliance is carried out in simulant D or in test media of substitute tests as prescribed in Directive 82/711/EEC and 85/572/EEC.E+W

5.  Where an entry in column 4 of the Annexes (restrictions and specifications) includes a bracketed number, that entry will be subject to a note relating to that number as set out in Annex VI.E+W

Regulations 9 and 13

SCHEDULE 2E+WProvisions Applicable when Testing Compliance with the Migration Limits

General ProvisionsE+W

1.  When the results of the migration tests specified in this Schedule and, where appropriate Schedule 3, are analytically determined, the specific gravity of any simulants used is assumed to be 1, so that milligrams of any substance released per litre of simulant will correspond numerically to milligrams of that substance released per kilogram of that simulant.

2.  Where any migration test specified in this Schedule and, where appropriate, Schedule 3 is carried out on any sample taken from any plastic material or article and the quantities of food or simulant placed in contact with the sample differ from those employed in the actual conditions under which the plastic material or article is used or is to be used, the results obtained should be corrected by applying the formula M = (( m.a2/a1.q).1000) where —E+W

(a)M is the migration in mg/kg:

(b)m is the mass in the mg of substance released by the sample as determined by the migration test;

(c)a1 is the surface area in square decimetres of the sample in contact with the food or simulant during the migration test;

(d)a2 is the surface area in square decimetres of the plastic material or article in actual conditions of use; and

(e)q is the quantity in grams of food in contact with the plastic material or article in actual conditions of use.

3.—(1) Subject to sub-paragraph (2), any testing of migration from any plastic material or article must be carried out on that plastic material or article.E+W

(2) In any case where determination in accordance with sub-paragraph (1) above is impracticable, such testing must be carried out, using either specimens taken from that plastic material or article, or where appropriate, specimens representative of that plastic material or article.

(3) Any sample used for such testing must be placed in contact with the simulant or food, as the case may be, in a manner representing the contact conditions in actual use, and for this purpose the testing must be carried out in such a way that only those parts of the sample intended to come into contact with food in actual use will be in contact with the simulant or food.

(4) Any migration testing of caps, gaskets, stoppers or similar devices for sealing must be carried out on these articles by applying them to the containers for which they are intended in a manner which corresponds to the conditions of closing in normal or foreseeable use.

4.—(1) Any sample of plastic material or article shall be placed in contact with the appropriate simulant or the food for a period and at a temperature which are chosen by reference to the contact conditions in actual use in accordance with the provisions of this Schedule and, where appropriate, Schedule 3.E+W

(2) At the end of the period referred to in sub-paragraph (1), analytical determination of the total quantity of substances (overall migration), each specific quantity of a substance (specific migration) or, as the case may be, both that total and that specific quantity released by the sample must be carried out on the simulant or food, as the case may be.

(3) Verification that migration into food complies with a migration limit specified in regulation 9 or in Annex II, III or IV (for the purposes of this Schedule and Schedule 3 referred to together as “the Annexes”) must be carried out under the most extreme conditions of time and temperature foreseeable in actual use in accordance with the provisions of this Schedule.

(4) Verification that migration into food simulants complies with a migration limit specified in regulation 9 or the Annexes must be carried out in accordance with the provisions of this Schedule and using conventional migration tests, the basic rules for which are set out in Schedule 3.

5.  Where a plastic material or article is intended to come into repeated contact with food, any migration test must (subject to paragraph 7 below) be carried out three times on a single sample in accordance with the conditions laid down in this Schedule and, where appropriate, Schedule 3 using separate samples of the simulant or, as the case may be food, on each occasion, and the level of the migration found in the third test shall be treated as the level relevant to that test.E+W

Special provisions relating to the fat reduction factorE+W

6.—(1) Subject to paragraph 7, the results of tests for specific migration in foods containing more than 20% fat must be corrected by the fat reduction factor (“FRF”), being a factor between 1 and 5 (expressed as MFRF) by which measured migration of lipophilic substances listed in Annex IVa into a fatty food or simulant D and its substitutes are divided before comparison with specific migration limits.

(2) The following equations shall be applied before comparison with the specific migration limit —

(a)MFRF = M/FRF, and

(b)FRF = (g fat in food/kg of food)/200 = (% fat × 5)/100.

7.—(1) Correction by the FRF may not be used —E+W

(a)where the plastic material or article is in contact or is intended to be brought into contact with foods intended for infants and young children;

(b)for substances listed in the Annexes having a restriction in column (4) of SML = ND;

(c)for substances not listed in the Annexes and used behind a plastic functional barrier with a migration limit of 0.01 mg/kg;

(d)except in the circumstances specified in sub-paragraph (2), for plastic materials or articles —

(i)for which it is impracticable to estimate the relationship between the surface area and the quantity of food in contact with it, due to shape, use or other factors, and

(ii)where the migration is calculated using the conventional surface area/volume conversion factor of 6 dm2/kg.

(2) For containers and other fillable articles with a capacity of less than 500 millilitres or more than 10 litres and for sheets and films in contact with foods containing more than 20% fat —

(a)the migration may be calculated as concentration (expressed as mg/kg) in the food or food simulant and corrected by the FRF; or

(b)the migration may be re-calculated as mg/dm2 without applying the FRF,

and provided the value resulting from the calculation under either sub-paragraph (a) or (b) is below the SML the plastic material or article shall be considered to be in compliance.

8.  If use of the FRF under paragraph 6 or 7(2) produces a result that indicates the overall migration limit has been exceeded, the plastic material or article in question must not be considered to be in compliance.E+W

Special provisions relating to the correction of specific migration in simulant DE+W

9.  The specific migration of those lipophilic substances listed in Annex IVa into simulant D and its substitutes must be corrected by —

(a)the simulant D reduction factor (“DRF”), being the reduction factor referred to in paragraph 2(2) of Part 3 and paragraphs 2 and 3 of Part 4 of Schedule 3, provided that —

(i)in cases where the specific migration into simulant D is higher than 80% of the content of the substance in the finished plastic material or article, it can be demonstrated by scientific or experimental evidence, such as testing with the most critical foods, that the DRF is appropriate, and

(ii)the substance is not one mentioned in paragraph 7(1)(b) or (c);

(b)the FRF, provided that the fat content of the food to be packed is known and the requirements of paragraphs 6, 7 and 8 are fulfilled; or

(c)the total reduction factor (“TRF”), being the factor —

(i)by which a measured specific migration into simulant D or a substitute must be divided before comparison with the specific migration limit, and

(ii)which is obtained by multiplying the DRF by the FRF with a maximum value of 5, when both factors are applicable.

Special provisions relating to overall migrationE+W

10.—(1) Subject to sub-paragraph (2), any method of analytical determination may be used to prove excess of an overall migration limit in relation to a plastic material or article.

(2) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with regulation 9 it is a defence for the person charged to prove that —

(a)if an aqueous simulant specified in Schedule 3 had been used, and the analytical determination of the total quantity of substances released by a sample of the plastic material or article tested had been carried out by evaporation of the simulant and weighing of the residue; or

(b)if rectified olive oil or any of its substitutes had been used as a simulant and —

(i)a sample of the plastic material or article had been weighed before and after contact with the simulant;

(ii)the simulant absorbed by the sample had been extracted and determined quantitatively;

(iii)the quantity of simulant so found had been subtracted from the weight of the sample measured after contact with the simulant; and

(iv)the difference between the initial and corrected final weights had been determined to represent the overall migration of the sample examined,

there would have been no such excess so determined.

11.—(1) Where a plastic material or article is intended to come into repeated contact with food and it is technically impossible to carry out the test described in paragraph 5, the test will be modified in accordance with sub-paragraph (2) or in such other way so as to enable the level of migration occurring during the third such test to be determined, and such a determination may be used as evidence of the overall migration in relation to a plastic material or article.E+W

(2) Three identical samples of the plastic material or article are to be procured, following which —

(a)the first sample is to be subjected to the appropriate test according with paragraph 4 and the overall migration determined (M1);

(b)the second and third samples are to be subjected to the same conditions of temperature but the period of contact is to be respectively two and three times that specified and the overall migration determined in each case (M2 and M3).

(3) Where a modified test has been carried out in accordance with sub-paragraph (2), provided that either M1 or M3 — M2 did not exceed the overall migration limit, the plastic material or article subjected to the test will be deemed to be in compliance with that limit.

12.—(1) Any plastic material or article which exceeds its overall migration limit by an amount not exceeding the analytical tolerance specified in sub-paragraph (2) will be deemed for the purposes of these Regulations not to exceed its overall migration limit.E+W

(2) The following analytical tolerances will be applied for limits of overall migration —

(a)20 mg/kg or, as the case may be, 3 milligrams per square decimetre in migration tests using as a simulant rectified olive oil or substitutes;

(b)12mg/kg or, as the case may be, 2 milligrams per square decimetre in migration tests using other simulants referred to in Schedule 3.

Special provisions relating to caps, lids, gaskets, stoppers and similar sealing articlesE+W

13.—(1) If the intended use is known, caps, lids, gaskets, stoppers and similar sealing articles must be tested by applying them to the containers for which they are intended under conditions of closure corresponding to the normal or foreseeable use and on the assumption that such articles are in contact with a quantity of food filling the container.

(2) The results of any tests carried out under sub-paragraph (1) must be expressed in mg/kg or mg/dm2 as appropriate in accordance with the requirements of regulation 9(2), taking into account the total contact surface of sealing article and container that is potentially in contact with the food.

(3) If the intended use of an article of the type mentioned in sub-paragraph (1) is not known, it must be —

(a)tested separately from the container for which it is intended, with the result being expressed in mg/article; and

(b)the value added, if appropriate, to the quantity migrated from that container.

Regulations 9 and 13

SCHEDULE 3E+WOverall and Specific Migration Testing Using Food Simulants

PART 1 E+WBasic Rules

1.  Subject to paragraphs 2, 3 and 4 of this Part, migration tests for the determination of specific and overall migration must be carried out using the food simulants specified in Parts 2, 3 and, where appropriate 4, and under conventional migration test conditions as specified in Part 5.E+W

2.  Subject to paragraphs 3 and 4 of this Part, substitute tests which use test media under the conventional substitute test conditions as specified in Part 6 must be carried out if the migration test using the fatty food simulants specified in Part 3 is not feasible for technical reasons connected with the method of analysis.E+W

3.  Subject to paragraph 4 of this Part, alternative tests as specified in Part 7 may be used instead of the migration test with fatty food simulants specified in Part 3 but the results of such alternative tests may not be used to determine compliance with a migration limit unless the conditions specified in Part 7 are fulfilled.E+W

4.  In migration testing it is permissible to —E+W

(a)reduce the number of tests to be carried out to that or those which, in the specific case under examination, is or are generally recognised to be the most severe on the basis of scientific evidence;

(b)omit the migration, the substitute or the alternative tests where —

(i)there is conclusive proof that the migration limits cannot be exceeded in any foreseeable conditions of use of the material or article, or

(ii)the conditions for non-compulsory testing set out in Article 8(2) or 8(3) of the Directive are met.

PART 2 E+WFood Simulants to be used in Migration Testing

1.  Subject to Parts 3, 4, 5 and 7, the simulants to be used in migration testing are specified in the Table to this paragraph (referred to in this Part as “the Table”).E+W

12
AbbreviationFood Simulant
Simulant A:Distilled water or water of equivalent quality
Simulant B:3% Acetic acid (w/v) in aqueous solution
Simulant C:10% Ethanol (v/v) in aqueous solution except that the concentration of ethanol solution shall be adjusted to the actual alcoholic strength of the food if it exceeds 10% (v/v)
Simulant D:Rectified olive oil having the characteristics specified in paragraph 3 or, subject to paragraph 5, any of the fatty food simulants specified in paragraph 4

2.  For the purposes of this Schedule a reference to an abbreviation in column 1 of the Table means a reference to the simulant in column 1 of that Table opposite that abbreviation.E+W

3.  The characteristics of rectified olive oil referred to in the Table are —E+W

(a)Iodine value (Wijs) = 80 to 88;

(b)Refractive index at 25°C = 1.4665 to 1.4679;

(c)Acidity (expressed as % of oleic acid) = 0.5% maximum;

(d)Peroxide number (expressed as oxygen milli-equivalents per kg of oil) = 10 maximum.

4.  The fatty food simulants referred to in the Table are —E+W

(a)corn oil with standardised specifications;

(b)sunflower oil, the characteristics of which are —

(i)Iodine value (Wijs) = 120 to 145;

(ii)Refractive index at 20°C = 1.474 to 1.476;

(iii)Saponification number = 188 to 193;

(iv)Relative density at 20°C = 0.918 to 0.925;

(v)Unsaponifiable matter = 0.5% to 1.5%;

(c)a synthetic mixture of triglycerides the composition of which is as set out in the following tables:

Fatty acid distribution

No of C-atoms in fatty acid residue681012141618others
GLC area (%)16—98—1145—5212—158—108—121

Purity

Content of monoglycerides (enzymatically)�?�0.2%
Content of diglycerides (enzymatically)�?�2.0%
Unsaponifiable matter�?�0.2%
Iodine value�?�0.1%
(Wijs)
Acid value�?�0.1%
Water content (K Fischer)�?�0.1%
Melting point28 ± 2°C

Typical absorption spectrum (thickness of layer: d = 1 cm; Reference: water at 35°C)

Wavelength (nm)290310330350370390430470510
Transmittance (%)~2~15~37~64~80~88~95~97~98

At least 10% light transmittance at 310 nm

5.  Where a fatty food simulant specified in paragraph 4 is used in migration testing and the result of that test shows that a plastic material or article does not comply with any migration limit specified in regulation 9 or the Annexes, verification that the plastic material or article does not comply with the specified migration must be carried out by testing that material or article using olive oil if such testing is technically feasible, and if such testing is not technically feasible the plastic material or article will be deemed not to comply with the specified migration limit.E+W

PART 3 E+WSelection of Food Simulants

Testing, reduction factors and definition of food typesE+W

1.  The testing of plastic materials and articles must be carried out under the test conditions specified in Part 5 using a simulant or simulants selected in accordance with this Part and taking a new test specimen of the plastic material or article for each simulant used.

2.—(1) Where a test is carried out on a plastic material or article intended to come into contact with more than one food or group of foods and a reduction factor is specified for one or more of those foods or groups of foods which is not equivalent to the reduction factor specified for one or more of the other foods or groups of foods with which the plastic material or article is intended to come into contact —E+W

(a)the reduction factor specified for each food or group of foods, as appropriate, must be applied to the test result; and

(b)the plastic material or article must be treated as being capable of transferring its constituents to food with which it may come into contact in excess of a migration limit specified in regulation 9 or the Annexes if, following application of those specified reduction factors, one or more of the results show that the material or article does not comply with that specified migration limit.

(2) For the purpose of this paragraph —

(a)a reduction factor is the figure which follows an “X” and oblique stroke in the group of columns headed “Simulants to be used” in the Table to Part 4;

(b)a reduction factor is specified for a food or group of foods where, in the Table to Part 4 —

(i)the food of group of foods is described in the column headed “Description of food”, and

(ii)“X” is placed in a column headed by a specified simulant opposite that food or group of foods followed by an oblique stroke and a reduction factor;

(c)a reduction factor will be applied to a test result by dividing the result by that reduction factor.

3.  Food types are defined in Table 1 below as follows —E+W

Table 1:

Food types

DefinitionMeaning
Aqueous foods having a pH > 4.5Foods in relation to which simulant A only is specified in the Table to Part 4
Acidic foods having a pH �?� 4.5Foods in relation to which simulant B only is specified in Table to Part 4
Alcoholic foodsFoods in relation to which simulant C only is specified in the Table to Part 4
Fatty foodsFoods in relation to which simulant D only is specified in the Table to Part 4
Dry FoodsFoods in relation to which no simulant is specified in the Table to Part 4

Selection of simulants for testing materials and articles intended for contact with all food typesE+W

4.  The simulants to be used in testing a plastic material or article which is intended for contact with all food types are simulant B, simulant C and simulant D which, at the test conditions specified in Part 5, are considered to be more severe.

Selection of simulants for testing materials and articles which are already in contact with a known foodE+W

5.  The simulant or simulants to be used in testing a plastic material or article which is already in contact with a known food will be —

(a)where —

(i)the known food is a specific food or is within a specific group of foods described in column 2 of the Table to Part 4 and,

(ii) for the purposes of that Part, a simulant is, or simulants are, specified in relation to that specific food or specific group of foods,

the simulant or simulants so specified;

(b)where —

(i)the known food is neither a specific food, nor

(ii) within a specific group of foods described in the Table to Part 4 of this Schedule,

the simulant or simulants in column 2 of Table 2 opposite the description of food in column 1 of that Table which corresponds most closely to the known food.

Selection of simulants for testing materials and articles which are accompanied by a specific indicationE+W

6.  The simulant or simulants to be used in testing a plastic material or article which, pursuant to Regulation 1935/2004 is accompanied by a specific indication stating any type or types of food described in Table 1 with which it may or may not be used will be the simulant or simulants in column 2 of Table 2 opposite the contact food in column 1 of that Table which corresponds most closely to the type or types of food with which it may be used, as identified by the indication which accompanies the plastic material or article.

7.  The simulant or simulants to be used in testing a plastic material or article which, pursuant to Regulation 1935/2004, is accompanied by a specific indication, expressed in accordance with paragraph 8, stating any food or group of foods described in the Table to Part 4 with which it may or may not be used will be —E+W

(a)where the indication states that the plastic material or article may be used with a food or group of foods described in column 2 of the Table to Part 4, the food simulant or food simulants which, for the purposes of Part 4, is or are specified in relation to that food or group of foods;

(b)where the indication states that the plastic material or article should not be used with any food or group of foods described in column 2 of Table to Part 4, a simulant other than one specified, for the purposes of Part 4, in relation to that food or group of foods.

8.  A specific indication referred to in paragraph 7 is expressed in accordance with this paragraph if it is expressed —E+W

(a)at a marketing stage other than retail, by using the reference number in column 1 of the Table to Part 4 of these Regulations or the description of food in column 2 of that Table which, in either case, corresponds to the food;

(b)at the retail stage, by using an indication which refers to only a few foods or groups of foods described in the Table to Part 4.

Table 2:

Simulants to be selected for testing food contact materials in special cases

Contact foodsSimulant
Only aqueous foodsSimulant A
Only acidic foodsSimulant B
Only alcoholic foodsSimulant C
Only fatty foodsSimulant D
All aqueous and acidic foodsSimulant B
All alcoholic and aqueous foodsSimulant C
All alcoholic and acidic foodsSimulant C and B
All fatty and aqueous foodsSimulants D and A
All fatty and acidic foodsSimulants D and B
All fatty, alcoholic and aqueous foodsSimulants D and C
All fatty, alcoholic and acidic foodsSimulants D, C and B

PART 4 E+WSimulants to be used in relation to a Specific Food or Group of Foods

1.  For the purposes of this Schedule a simulant is specified in relation to a specific food or a specific group of foods where “X” is placed in the column headed by that simulant opposite that specific food or specific group of foods in the Table to this Part, and the Table will be read in conjunction with the notes to it and with paragraphs 2 to 5.E+W

2.  For the purposes of this Part —E+W

(a)a reduction factor is the figure which follows an “X” and oblique stroke in the group of columns headed “Simulants to be used” in the Table to this Part;

(b)a reduction factor is specified in relation to a specific food or group of foods where, in the Table —

(i)the food or group of foods is described in the column headed “Description of food”; and

(ii)“X” is placed in a column headed by a specified simulant opposite that food or group of foods followed by an oblique stroke and a reduction factor.

3.  Where a reduction factor is specified in the Table in relation to a specific food or a specific group of foods, that reduction factor shall be applied to the result of any migration test using the simulant specified in relation to that food or group of foods by dividing the result of the test by the reduction factor.E+W

4.—(1) Where the letter “a” is shown in brackets after the “X”, only one of the two simulants specified will be used in the migration test, that is to say —E+W

(a)if the pH value of the food is higher than 4.5, simulant A will be used;

(b)if the pH value of the foodstuff is 4.5 or less, simulant B will be used.

(2) Where the letter “b” is shown in brackets after the “X”, the indicated test will be carried out with ethanol 50% (v/v).

5.  Where a food is listed in the Table under both a specific and a general heading, the simulant relating to the specific heading is the simulant which falls to be used for the migration test.E+W

1 Simulant B will not be used where the pH is more than 4.5.

2 This test will be carried out in the case of liquids or beverages of an alcoholic strength exceeding 10% vol. with aqueous solutions of ethanol of a similar strength.

3 If it can be demonstrated under regulation 13(2) or proved by means of an appropriate test that there is to be no fatty contact with the plastic material or article, simulant D will not be used.

Reference NumberDescription of foodSimulants to be used
ABCD
01Beverages
01.01Non-alcoholic beverages or alcoholic beverages of an alcoholic strength lower than 5% vol:X(a)X(a)
— Waters, ciders, fruit or vegetable juices of normal strength or concentrated, musts, fruit nectars, lemonades and mineral waters, syrups, bitters, infusions, coffee, tea, liquid chocolate, beers and other
01.02Alcoholic beverages of an alcoholic strength equal to or exceeding 5% vol.
— Beverages shown under heading 01.01 but with an alcoholic strength equal to or exceeding 5% vol.
— Wines, spirits and liqueursX1X2
01.03Miscellaneous: undenatured ethyl alcoholX1X2
02Cereals, cereal products, pastry, biscuits, cakes and other bakers' wares
02.01Starches
02.02Cereals, unprocessed, puffed, in flakes (including popcorn, cornflakes and the like)
02.03Cereal flour and meal
02.04Macaroni, spaghetti and similar products
02.05Pastry, biscuits, cakes and other bakers' wares, dry:
A With fatty substances on the surfaceX/5
B Other
02.06Pastry, biscuits, cakes and other bakers' wares, fresh
A With fatty substances on the surfaceX/5
B OtherX
03Chocolate, sugar and products thereof Confectionery products
03.01Chocolate, chocolate-coated products, substitutes and products coated with substitutesX/5
03.02Confectionery products:
A in solid form
— with fatty substances on the surfaceX/5
— Other
B in paste form:
— with fatty substances on the surfaceX/3
— moistX
03.03Sugar and sugar products
A In solid form
B Honey and the likeX
C Molasses and sugar syrupsX
04Fruit, vegetable and products thereof
04.01Whole fruit, fresh or chilled
04.02Processed fruit:
A Dried or dehydrated fruit, whole or in the form of flour or powder
B Fruit in the form of chunks, puree or pasteX(a)X(a)
C Fruit preserves (jams and similar products
— whole fruit or chunks or in the form of flour or powder, preserved in a liquid medium):
— i) In an aqueous mediumX(a)X(a)
— ii) In an oily mediumX(a)X(a)X
— iii) In an alcoholic medium > 5% volX1X
04.03Nuts (peanuts, chestnuts, almonds, hazelnuts, walnuts, pine kernels and others)
A Shelled, dried
B Shelled and roastedX/53
C In paste or cream formXX/33
04.04Whole vegetables, fresh or chilled
04.05Processed vegetables:
A Dried or dehydrated vegetables whole or in the form of flour or powder
B Vegetables, cut, in the form of pureesX(a)X(a)
C Preserved vegetables:
— i) In an aqueous mediumX(a)X(a)
— ii) In an oily mediumX(a)X(a)X
— iii) In an alcoholic medium (> 5% vol)X1X
05Fats and oils
05.01Animal and vegetable fats and oils, whether natural or treated (including cocoa butter, lard, re-solidified butter)X
05.02Margarine, butter and other fats and oils made from water emulsions in oilX/2
06Animal products and eggs
06.01Fish:
A Fresh, chilled, salted, smokedXX/33
B In the form of pasteXX/33
06.02Crustaceans and molluscs (including oysters, mussels, snails) not naturally protected by their shellsX
06.03Meat of all zoological species (including poultry and game):
A Fresh, chilled, salted, smokedXX/4
B In the form of paste, creamsXX/4
06.04Processed meat products (ham, salami, bacon and other)XX/4
06.05Preserved and part-preserved meat and fish:
A In an aqueous mediumX(a)X(a)
B In an oily mediumX(a)X(a)X
06.06Eggs not in shell:
A Powdered or dried
B OtherX
06.07Egg yolks:
A LiquidX
B Powdered or frozen
06.08Dried white of egg
07Milk products
07.01Milk:
A WholeX(b)
B Partly driedX(b)
C Skimmed or partly skimmedX(b)
D Dried
07.02Fermented milk such as yoghurt, buttermilk and such products in association with fruit and fruit productsXX(b)
07.03Cream and sour creamX(a)X(b)
07:04Cheeses:
A Whole, with non-edible rind
B All othersX(a)X(a)X/33
07:05Rennet:
A In liquid or viscous formX(a)X(a)
B Powdered or dried
08Miscellaneous products
08.01VinegarX
08.02Fried or roasted foods:
A Fried potatoes, fritters and the likeX/5
B Of animal originX/4
08.03Preparations for soups, broths in liquid, solid or powder form (extracts, concentrates); homogenized composite food preparations, prepared dishes:
A Powdered or dried
— i) With fatty substances on the surfaceX/5
— ii) Other
B Liquid or paste:
— i) With fatty substances on the surfaceX(a)X(a)X/3
— ii) OtherX(a)X(a)
08.04Yeasts and raising agents:
A In paste formX(a)X(a)
B Dried
08.05Salt
08.06Sauces:
A Without fatty substances on the surfaceX(a)X(a)
B Mayonnaise, sauces derived from mayonnaise, salad creams and other oil in water emulsionsX(a)X(a)X/3
C Sauce containing oil and water forming two distinct layersX(a)X(a)X
08.07Mustard (except powdered mustard under heading 08.17)X(a)X(a)X/33
08.08Sandwiches, toasted bread and the like containing any kind of foodstuff:
A With fatty substances on the surfaceX/5
B Other
08.09Ice-creamsX
08.10Dried foods:
A With fatty substances on the surfaceX/5
B Other
08.11Frozen or deep-frozen foods
08.12Concentrated extracts of an alcoholic strength equal to or exceeding 5% volX1X
08.13Cocoa:
A Cocoa powderX/53
B Cocoa pasteX/33
08.14Coffee, whether or not roasted, decaffeinated or soluble, coffee substitutes, granulated or powdered
08.15Liquid coffee extractsX
08.16Aromatic herbs and other herbs:
Camomile, mallow, mint, tea, lime blossom and others
08.17Spices and seasonings in the natural state:
Cinnamon, cloves, powdered mustard, pepper, vanilla, saffron and other

PART 5 E+WMigration Test Conditions (Times and Temperatures)

General criteriaE+W

1.  Subject to paragraphs 2, 4, 6 and 7 below and to paragraph 4.4 of Chapter II of the Annex to Directive 82/711, when carrying out migration tests the time and temperature used will be the time and temperature selected from column 2 of the Table to this Part which correspond to the worst foreseeable conditions of contact specified in column 1 of that Table for the plastic material or article being tested and to any labelling information on maximum temperature for use.

2.  Where the plastic material or article being tested is intended for a food contact application covered by a combination of two or more times and temperatures specified in column 2 of the Table to this Part, the migration test will be carried out by subjecting the test specimen successively to all the applicable worst foreseeable conditions appropriate to the sample, using the same portion of food simulant.E+W

3.  For the purposes of this Part the worst foreseeable conditions of contact are those which are recognised to be the most severe on the basis of scientific evidence.E+W

Volatile migrantsE+W

4.  When carrying out a test of the specific migration of volatile substances any test using a simulant must be performed in a manner that recognises the loss of volatile migrants which may occur in the worst foreseeable conditions of use.

Special casesE+W

5.  When carrying out a migration test of a plastic material or article that is intended for use in a microwave oven, if the appropriate time and temperature is selected from the table to this Part, either a conventional oven or a microwave oven may be used.

6.  Where the carrying out of a migration test under contact conditions specified in the Table to this Part causes any physical or other change in the test specimen that does not occur under the worst foreseeable conditions of use of the plastic material or article being tested, the migration test will be carried out in the worst foreseeable conditions of use in which such physical or other change does not occur.E+W

7.  Where, in actual use, the plastic material or article being tested is intended to be used for periods of less than 15 minutes at any temperature of not less than 70°C and not more than 100°C and such use is indicated by appropriate labelling or instructions, no test other than for 2 hours at 70°C shall be carried out on the plastic material or article unless the plastic material or article is also intended to be used for storage at room temperature, in which case no test other than for 10 days test at 40°C shall be carried out.E+W

1 The period of time which represents the worst foreseeable conditions of contact.

2 This temperature will be used only for simulant D. For simulant A, B or C the test may be replaced by a test at 100°C or at reflux temperature for a duration of four times the time selected in accordance with paragraph 1 of this Part.

Conditions of contact in worst foreseeable useTest conditions
Contact time:Test time:
less than or equal to 5 minutes1
>5 minutes but less than or equal to 0.5 hours0.5 hours
>0.5 hours but less than or equal to 1 hour1 hour
>1 hour but less than or equal to 2 hours2 hours
>2 hours but less than or equal to 4 hours4 hours
>4 hours but less than or equal to 24 hours24 hours
>24 hours10 days
Contact temperature:Test temperature:
less than or equal to 5°C5°C
>5°C but less than or equal to 20°C20°C
>20°C but less than or equal to 40°C40°C
>40°C but less than or equal to 70°C70°C
>70°C but less than or equal to100°C100°C or reflux temperature
>100°C but less than or equal to 121°C121°C 2
>121°C but less than or equal to 130°C130°C 2
>130°C but less than 150°C150°C 2
>150°C175°C 2

PART 6 E+WSubstitute Fat Test for Overall and Specific Migration

1.  Subject to paragraphs 2, 4 and 5, all the test media specified in the Table to this Part will be used in the substitute fat test for overall or specific migration under the test conditions corresponding to the test conditions for simulant D.E+W

2.  Test conditions other than those specified in the Table to this Part may be used in the substitute fat test if the assumptions underlying the test conditions specified in that Table and, where the plastic material or article being tested is a polymer, the existing experience of that type of polymer are taken into account.E+W

3.  For each test —E+W

(a)a new test specimen must be used;

(b)the rules prescribed for simulant D in Parts 3, 4 and 5 of this Schedule must be applied for each test medium;

(c)subject to paragraph 4, compliance with a migration limit must be determined by selecting the highest value using all the test methods.

4.  Where carrying out a migration test causes any physical or other change in the test specimen which does not occur under the worst foreseeable conditions of use of the plastic material or article the result of that test shall not be used to ascertain compliance with a migration limit.E+W

5.  Any test conditions in the Table to this Part which are generally recognised on the basis of scientific evidence as not being appropriate for the material or article to be tested must not be used.E+W

Conventional conditions for substitute tests

1 MPPO = Modified polyphenylene oxide

2 The volatile test media are used up to a maximum temperature of 60°C. A precondition of using these tests is that the material or article will withstand the test conditions that would otherwise be used with simulant D. Immerse a test specimen in olive oil under the appropriate conditions. If the physical properties are changed (eg melting, deformation) then the material is considered unsuitable for use at that temperature. If the physical properties are not changed then proceed with the substitute tests using new specimens.

Test conditions with simulant DTest conditions with isooctaneTest conditions with ethanol 95%Test conditions with MPPO1
10 days at 5°C0.5 days at 5°C10 days at 5°C
10 days at 20°C1 day at 20°C10 days at 20°C
10 days at 40°C2 days at 20°C10 days at 40°C
2 hours at 70°C0.5 hours at 40°C2 hours at 60°C
0.5 hours at 100°C0.5 hours at 60°C22.5 hours at 60°C0.5 hours at 100°C
1 hour at 100°C1 hour at 60°C23 hours at 60°C21 hour at 100°C
2 hours at 100°C1.5 hours at 60°C23.5 hours at 60°C22 hours at 100°C
0.5 hours at 121°C1.5 hours at 60°C23.5 hours at 60°C20.5 hours at 121°C
1 hour at 121°C2 hours at 60°C24 hours at 60°C21 hour at 121°C
2 hours at 121°C2.5 hours at 60°C24.5 hours at 60°C22 hours at 121°C
0.5 hours at 130°C2 hours at 60°C24 hours at 60°C20.5 hours at 130°C
1 hour at 130°C2.5 hours at 60°C24.5 hours at 60°C21 hour at 130°C
2 hours at 150°C3 hours at 60°C25 hours at 60°C22 hours at 150°C
2 hours at 175°C4 hours at 60°C26 hours at 60°C22 hours at 175°C

PART 7 E+WAlternative Fat Tests for Overall and Specific Migration

1.  Subject to paragraph 2 of this Part the conditions which must be fulfilled to allow the result of either test specified in paragraph 3 to be used as an alternative to the result of a migration test carried out under Part 3 are that —E+W

(a)the result obtained in a “comparison test” shows that the values are equal to or greater than those obtained in the test with simulant D; and

(b)the migration occurring in either test specified in paragraph 3 does not, after application of the appropriate reduction factor, exceed the appropriate migration limit.

2.  The condition in sub-paragraph (a) of paragraph 1 does not have to be fulfilled if it can be shown on the basis of the result of scientific experiment that the values obtained in either of the tests specified in paragraph 3 are equal to or greater than those obtained in any of the migration tests specified in Part 3.E+W

3.  The migration tests referred to in paragraphs 2 and 3 are —E+W

(a)a test carried out using volatile media including isooctane, ethanol 95%, other volatile solvents or a mixture of solvents at such contact conditions as would result in values equal to or greater than those obtained in a test using simulant D;

(b)other tests using media having a very strong extraction power under very severe test conditions where, on the basis of scientific evidence, it is generally recognised that the results using these tests are equal to or higher than those obtained in a test using simulant D.

Regulation 14

SCHEDULE 4E+WInformation to be contained in a declaration of compliance

1.  The name and address of the business operator which manufactures or imports the plastic materials or articles or the substances intended for the manufacture of those materials or articles.E+W

2.  The identity of the materials, articles or substances intended for their manufacture.E+W

3.  The date of the declaration.E+W

4.  Confirmation that the plastic materials or articles meet the relevant requirements laid down in the Directive and in Regulation 1935/2004.E+W

5.  Adequate information relating to the substances used for which restrictions or specifications are in place under the Directive to allow downstream business operators to ensure compliance with them.E+W

6.  Adequate information relating to the substances which are subject to a restriction in food, obtained by experimental data or theoretical calculation about the level of their specific migration and, where appropriate, purity criteria in accordance with the purity Directives to enable the user of the plastic materials or articles to comply with the relevant Community provisions or, in their absence, with national provisions applicable to food.E+W

7.  Specifications on the use of the plastic material or article, such as —E+W

(a)the types of food intended to be in contact with it;

(b)the time and temperature of treatment and storage in contact with the food;

(c)the ratio of food contact surface area to volume used to establish the compliance of the plastic material or article.

8.  Confirmation, when a plastic functional barrier is used in a plastic multi-layer, that the plastic material or article complies with the requirements of paragraphs 2 to 4 of Article 7a of the Directive.E+W

Regulation 3(2)

SCHEDULE 5E+WTransitional arrangements

1.  In the case of a plastic material or article manufactured or imported into the European Community before 1st March 2006, the material or article in question meets the required standard if it meets the required standard as it was immediately before the implementation in Wales on 11th March 2005 of Commission Directive 2004/19/EC M1.E+W

Marginal Citations

M1OJ No. L71, 10.3.2004, p.8.

2.  In the case of a plastic material or article (other than one mentioned in paragraph 1) manufactured or imported into the European Community before 19th November 2007, the material or article in question meets the required standard if it meets the required standard as it was immediately before the implementation in Wales on 19th November 2006 of Commission Directive 2005/79/EC M2.E+W

Marginal Citations

M2OJ No. L302, 19.11.2005, p.35.

3.  In the case of —E+W

(a)a plastic material or article that does not comply with the restrictions and specifications for phthalates under Ref. Nos. 74560, 74640, 74880, 75100 or 75105 in Annex III, or

(b)a lid containing a gasket that does not comply with the restrictions and specifications for Ref. No. 36640 (azodicarbonamide) in Annex III

(other than one mentioned in paragraphs 1 or 2) and which was manufactured or imported into the European Community before 1st July 2008, the material or article in question meets the required standard if it meets the required standard as it was immediately before the implementation in Wales on 1st May 2008 of Commission Directive 2007/19/EC M3.

Marginal Citations

M3OJ No. L91, 31.3.2007, p.17.

4.  In the case of a plastic material or article (other than one mentioned in paragraphs 1, 2 or 3) manufactured or imported into the European Community before 1st May 2009, the material or article in question meets the required standard if it meets the required standard as it was immediately before the implementation in Wales on 1st May 2008 of Commission Directive 2007/19/EC.E+W

5.  In the case of a plastic material or article (other than one mentioned in paragraphs 1, 2, 3 or 4) manufactured or imported into the European Community before 7th March 2010, the material or article in question meets the required standard if it meets the required standard as it was immediately before the implementation in Wales on 7th March 2009 of Commission Directive 2008/39/EC M4.E+W

Marginal Citations

M4OJ No. L63, 7.3.2008, p.6.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources