Chwilio Deddfwriaeth

Directive 2014/33/EU of the European Parliament and of the CouncilDangos y teitl llawn

Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (recast) (Text with EEA relevance)

 Help about what version

Pa Fersiwn

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE

Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

  1. Introductory Text

  2. CHAPTER I GENERAL PROVISIONS

    1. Article 1.Scope

    2. Article 2.Definitions

    3. Article 3.Free movement

    4. Article 4.Placing on the market, making available on the market and putting into service

    5. Article 5.Essential health and safety requirements

    6. Article 6.Buildings or constructions in which lifts are installed

  3. CHAPTER II OBLIGATIONS OF ECONOMIC OPERATORS

    1. Article 7.Obligations of installers

    2. Article 8.Obligations of manufacturers

    3. Article 9.Authorised representatives

    4. Article 10.Obligations of importers

    5. Article 11.Obligations of distributors

    6. Article 12.Cases in which the obligations of manufacturers apply to importers or distributors

    7. Article 13.Identification of economic operators

  4. CHAPTER III CONFORMITY OF LIFTS AND SAFETY COMPONENTS FOR LIFTS

    1. Article 14.Presumption of conformity of lifts and safety components for lifts

    2. Article 15.Conformity assessment procedures for safety components for lifts

    3. Article 16.Conformity assessment procedures for lifts

    4. Article 17.EU declaration of conformity

    5. Article 18.General principles of the CE marking

    6. Article 19.Rules and conditions for affixing the CE marking and other markings

  5. CHAPTER IV NOTIFICATION OF CONFORMITY ASSESSMENT BODIES

    1. Article 20.Notification

    2. Article 21.Notifying authorities

    3. Article 22.Requirements relating to notifying authorities

    4. Article 23.Information obligation on notifying authorities

    5. Article 24.Requirements relating to notified bodies

    6. Article 25.Presumption of conformity of notified bodies

    7. Article 26.Subsidiaries of and subcontracting by notified bodies

    8. Article 27.Application for notification

    9. Article 28.Notification procedure

    10. Article 29.Identification numbers and lists of notified bodies

    11. Article 30.Changes to notifications

    12. Article 31.Challenge to the competence of notified bodies

    13. Article 32.Operational obligations of notified bodies

    14. Article 33.Appeal against decisions of notified bodies

    15. Article 34.Information obligation on notified bodies

    16. Article 35.Exchange of experience

    17. Article 36.Coordination of notified bodies

  6. CHAPTER V UNION MARKET SURVEILLANCE CONTROL OF LIFTS OR SAFETY COMPONENTS FOR LIFTS ENTERING THE UNION MARKET AND UNION SAFEGUARD PROCEDURE

    1. Article 37.Union market surveillance and control of lifts or safety components for lifts entering the Union market

    2. Article 38.Procedure for dealing with lifts or safety components for lifts presenting a risk at national level

    3. Article 39.Union safeguard procedure

    4. Article 40.Compliant lifts or safety components for lifts which present a risk

    5. Article 41.Formal non-compliance

  7. CHAPTER VI COMMITTEE PROCEDURE, TRANSITIONAL AND FINAL PROVISIONS

    1. Article 42.Committee procedure

    2. Article 43.Penalties

    3. Article 44.Transitional provisions

    4. Article 45.Transposition

    5. Article 46.Review

    6. Article 47.Repeal

    7. Article 48.Entry into force and application

    8. Article 49.Addressees

  8. Signature

    1. ANNEX I

      ESSENTIAL HEALTH AND SAFETY REQUIREMENTS

      1. PRELIMINARY REMARKS

        1. 1. Obligations under essential health and safety requirements apply only where...

        2. 2. The essential health and safety requirements contained in the Directive...

        3. 3. The manufacturer and the installer are under an obligation to...

        4. 1. General

          1. 1.1. Application of Directive 2006/42/EC

          2. 1.2. Carrier

          3. 1.3. Means of suspension and means of support

          4. 1.4. Control of loading (including overspeed)

            1. 1.4.1. Lifts must be so designed, constructed and installed as to...

            2. 1.4.2. Lifts must be equipped with an overspeed governor.

            3. 1.4.3. Fast lifts must be equipped with a speed-monitoring and speed-limiting...

            4. 1.4.4. Lifts driven by friction pulleys must be designed so as...

          5. 1.5. Machinery

            1. 1.5.1. All passenger lifts must have their own individual lift machinery....

            2. 1.5.2. The installer must ensure that the lift machinery and the...

          6. 1.6. Controls

            1. 1.6.1. The controls of lifts intended for use by unaccompanied disabled...

            2. 1.6.2. The function of the controls must be clearly indicated.

            3. 1.6.3. The call circuits of a group of lifts may be...

            4. 1.6.4. Electrical equipment must be so installed and connected that:

        5. 2. Risks for persons outside the car

          1. 2.1. The lift must be designed and constructed to ensure that...

          2. 2.2. The lift must be designed and constructed to prevent the...

          3. 2.3. The landings at the entrance and exit of the car...

        6. 3. Risks for persons in the car

          1. 3.1. Lift cars must be completely enclosed by full-length walls, fitted...

          2. 3.2. In the event of a power cut or failure of...

          3. 3.3. Buffers must be installed between the bottom of the shaft...

          4. 3.4. Lifts must be so designed and constructed as to make...

        7. 4. Other risks

          1. 4.1. The landing doors and car doors or the two doors...

          2. 4.2. Landing doors, where they have to contribute to the protection...

          3. 4.3. Counterweights must be so installed as to avoid any risk...

          4. 4.4. Lifts must be equipped with means enabling people trapped in...

          5. 4.5. Cars must be fitted with two-way means of communication allowing...

          6. 4.6. Lifts must be so designed and constructed that, in the...

          7. 4.7. Cars must be designed and constructed to ensure sufficient ventilation...

          8. 4.8. The car should be adequately lit whenever in use or...

          9. 4.9. The means of communication referred to in point 4.5 and...

          10. 4.10. The control circuits of lifts which may be used in...

        8. 5. Marking

          1. 5.1. In addition to the minimum particulars required for any machine...

          2. 5.2. If the lift is designed to allow people trapped in...

        9. 6. Instructions

          1. 6.1. The safety components for lifts referred to in Annex III...

          2. 6.2. Each lift must be accompanied by instructions. The instructions shall...

    2. ANNEX II

      1. A. CONTENT OF THE EU DECLARATION OF CONFORMITY FOR SAFETY COMPONENTS...

      2. B. CONTENT OF THE EU DECLARATION OF CONFORMITY FOR LIFTS

    3. ANNEX III

      LIST OF SAFETY COMPONENTS FOR LIFTS

      1. 1. Devices for locking landing doors.

      2. 2. Devices to prevent falls referred to in point 3.2 of...

      3. 3. Overspeed limitation devices.

      4. 4. Energy-accumulating buffers: non-linear, or with damping of the return movement....

      5. 5. Safety devices fitted to jacks of hydraulic power circuits where...

      6. 6. Electric safety devices in the form of safety circuits containing...

    4. ANNEX IV

      1. EU-TYPE EXAMINATION FOR LIFTS AND SAFETY COMPONENTS FOR LIFTS (module B)

        1. A. EU-type examination of safety components for lifts

          1. 1. EU-type examination is the part of a conformity assessment procedure...

          2. 2. The application for EU-type examination shall be lodged by the...

          3. 3. The technical documentation shall make it possible to assess whether...

          4. 4. The notified body shall:

          5. 5. Where the type of the safety component for lifts meets...

          6. 6. The notified body shall keep itself apprised of any changes...

          7. 7. The manufacturer shall inform the notified body that holds the...

          8. 8. Each notified body shall inform its notifying authority concerning the...

          9. 9. The Commission, the Member States and the other notified bodies...

          10. 10. The manufacturer shall keep with the technical documentation a copy...

          11. 11. Authorised representative

        2. B. EU-type examination of lifts

          1. 1. EU-type examination of lifts is the part of a conformity...

          2. 2. The application for EU-type examination shall be lodged by the...

          3. 3. The technical documentation shall make it possible to assess the...

          4. 4. The notified body shall:

          5. 5. The notified body shall draw up an evaluation report that...

          6. 6. Where the type meets the essential health and safety requirements...

          7. 7. The notified body shall keep itself apprised of any changes...

          8. 8. The installer shall inform the notified body of any modifications...

          9. 9. Each notified body shall inform its notifying authority concerning the...

          10. 10. The Commission, the Member States and the other notified bodies...

          11. 11. The installer shall keep with the technical documentation a copy...

          12. 12. Authorised representative

    5. ANNEX V

      FINAL INSPECTION FOR LIFTS

      1. 1. Final inspection is the part of a conformity assessment procedure...

      2. 2. Obligations of the installer

      3. 3. Final inspection

        1. 3.1. The installer shall lodge an application for final inspection with...

        2. 3.2. The examinations shall include at least one of the following:...

        3. 3.3. The tests of the lift shall include at least the...

      4. 4. If the lift satisfies the essential health and safety requirements...

      5. 5. CE marking and EU declaration of conformity

        1. 5.1. The installer shall affix the CE marking in the car...

        2. 5.2. The installer shall draw up a written EU declaration of...

      6. 6. The Commission and the Member States may obtain a copy...

      7. 7. Authorised representative

    6. ANNEX VI

      1. CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE FOR SAFETY COMPONENTS FOR LIFTS (module E)

        1. 1. Conformity to type based on product quality assurance for safety...

        2. 2. Obligations of the manufacturer

        3. 3. Quality system

          1. 3.1. The manufacturer shall lodge an application for assessment of his...

          2. 3.2. Under the quality system, each safety component for lifts shall...

          3. 3.3. The notified body shall assess the quality system to determine...

          4. 3.4. The manufacturer shall undertake to fulfil the obligations arising from...

          5. 3.5. The manufacturer or his authorised representative shall keep the notified...

        4. 4. Surveillance under the responsibility of the notified body

          1. 4.1. The purpose of surveillance is to make sure that the...

          2. 4.2. The manufacturer shall for assessment purposes allow the notified body...

          3. 4.3. The notified body shall periodically carry out audits to ensure...

          4. 4.4. Additionally, the notified body may pay unexpected visits to the...

        5. 5. CE marking and EU declaration of conformity

          1. 5.1. The manufacturer shall affix the CE marking, and, under the...

          2. 5.2. The manufacturer shall draw up a written EU declaration of...

        6. 6. The manufacturer shall for a period ending 10 years after...

        7. 7. Each notified body shall inform its notifying authority of quality...

        8. 8. Authorised representative

    7. ANNEX VII

      1. CONFORMITY BASED ON FULL QUALITY ASSURANCE FOR SAFETY COMPONENTS FOR LIFTS (module H)

        1. 1. Conformity based on full quality assurance for safety components for...

        2. 2. Obligations of the manufacturer

        3. 3. Quality system

          1. 3.1. The manufacturer shall lodge an application for assessment of his...

          2. 3.2. The quality system shall ensure compliance of the safety components...

          3. 3.3. The notified body shall assess the quality system to determine...

          4. 3.4. The manufacturer shall undertake to fulfil the obligations arising from...

          5. 3.5. The manufacturer shall keep the notified body which has approved...

        4. 4. Surveillance under the responsibility of the notified body

          1. 4.1. The purpose of surveillance is to make sure that the...

          2. 4.2. The manufacturer shall for assessment purposes allow the notified body...

          3. 4.3. The notified body shall carry out periodic audits to make...

          4. 4.4. Additionally, the notified body may pay unexpected visits to the...

        5. 5. CE marking and EU declaration of conformity

          1. 5.1. The manufacturer shall affix the CE marking, and, under the...

          2. 5.2. The manufacturer shall draw up a written EU declaration of...

        6. 6. The manufacturer shall, for a period ending 10 years after...

        7. 7. Each notified body shall inform its notifying authority of quality...

        8. 8. Authorised representative

    8. ANNEX VIII

      1. CONFORMITY BASED ON UNIT VERIFICATION FOR LIFTS (module G)

        1. 1. Conformity based on unit verification is the conformity assessment procedure...

        2. 2. Obligations of the installer

          1. 2.1. The installer shall take all measures necessary so that the...

          2. 2.2. The installer shall apply to a single notified body of...

        3. 3. The technical documentation shall allow an assessment of the conformity...

        4. 4. Verification

        5. 5. CE marking and EU declaration of conformity

          1. 5.1. The installer shall affix the CE marking in the car...

          2. 5.2. The installer shall draw up a written EU declaration of...

        6. 6. The installer shall keep with the technical documentation a copy...

        7. 7. Authorised representative

    9. ANNEX IX

      1. CONFORMITY TO TYPE WITH RANDOM CHECKING FOR SAFETY COMPONENTS FOR LIFTS (module C 2)

        1. 1. Conformity to type with random checking is the part of...

        2. 2. Manufacturing

        3. 3. The manufacturer shall lodge an application for random checking with...

        4. 4. The notified body shall carry out or have carried out...

        5. 5. CE marking and EU declaration of conformity

          1. 5.1. The manufacturer shall affix the CE marking, and, under the...

          2. 5.2. The manufacturer shall draw up a written EU declaration of...

        6. 6. Authorised representative

    10. ANNEX X

      1. CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE FOR LIFTS (module E)

        1. 1. Conformity to type based on product quality assurance is the...

        2. 2. Obligations of the installer

        3. 3. Quality system

          1. 3.1. The installer shall lodge an application for assessment of his...

          2. 3.2. Under the quality system, each lift shall be examined and...

          3. 3.3. The notified body shall assess the quality system to determine...

          4. 3.4. The installer shall undertake to fulfil the obligations arising from...

          5. 3.4.1. The installer shall keep the notified body which has approved...

          6. 3.4.2. The notified body shall assess the modifications proposed and decide...

        4. 4. Surveillance under the responsibility of the notified body

          1. 4.1. The purpose of surveillance is to make sure that the...

          2. 4.2. The installer shall, for assessment purposes, allow the notified body...

          3. 4.3. The notified body shall periodically carry out audits to ensure...

          4. 4.4. Additionally, the notified body may pay unexpected visits to the...

        5. 5. The installer shall, for 10 years after the last lift...

        6. 6. Each notified body shall inform its notifying authority of quality...

        7. 7. CE marking and EU declaration of conformity

          1. 7.1. The installer shall affix the CE marking in the car...

          2. 7.2. The installer shall draw up a written EU declaration of...

        8. 8. Authorised representative

    11. ANNEX XI

      1. CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION FOR LIFTS (module H1)

        1. 1. Conformity based on full quality assurance plus design examination for...

        2. 2. Obligations of the installer

        3. 3. Quality system

          1. 3.1. The installer shall lodge an application for assessment of his...

          2. 3.2. The quality system shall ensure compliance of the lifts with...

          3. 3.3. Design examination

            1. 3.3.1. When the design is not entirely in accordance with harmonised...

            2. 3.3.2. Where the design does not satisfy the applicable essential health...

            3. 3.3.3. The installer shall keep the notified body that has issued...

            4. 3.3.4. Each notified body shall inform its notifying authority of the...

            5. 3.3.5. The installer shall keep a copy of the EU design...

          4. 3.4. Assessment of the quality system

          5. 3.5. The installer shall undertake to fulfil the obligations arising from...

        4. 4. Surveillance under the responsibility of the notified body

          1. 4.1. The purpose of surveillance is to make sure that the...

          2. 4.2. The installer shall, for assessment purposes, allow the notified body...

          3. 4.3. The notified body shall carry out periodic audits to make...

          4. 4.4. Additionally, the notified body may pay unexpected visits to the...

        5. 5. The installer shall, keep at the disposal of the national...

        6. 6. Each notified body shall inform its notifying authority of full...

        7. 7. CE marking and EU declaration of conformity

          1. 7.1. The installer shall affix the CE marking in the car...

          2. 7.2. The installer shall draw up a written EU declaration of...

        8. 8. Authorised representative

    12. ANNEX XII

      1. CONFORMITY TO TYPE BASED ON PRODUCTION QUALITY ASSURANCE FOR LIFTS (module D)

        1. 1. Conformity to type based on production quality assurance for lifts...

        2. 2. Obligations of the installer

        3. 3. Quality system

          1. 3.1. The installer shall lodge an application for assessment of his...

          2. 3.2. The quality system shall ensure compliance of the lifts with...

          3. 3.3. The notified body shall assess the quality system to determine...

          4. 3.4. The installer shall undertake to fulfil the obligations arising from...

          5. 3.4.1. The installer shall keep the notified body that has approved...

          6. 3.4.2. The notified body shall assess the modifications proposed and decide...

        4. 4. Surveillance under the responsibility of the notified body

          1. 4.1. The purpose of surveillance is to make sure that the...

          2. 4.2. The installer shall, for assessment purposes, allow the notified body...

          3. 4.3. The notified body shall carry out periodic audits to make...

          4. 4.4. Additionally, the notified body may pay unexpected visits to the...

        5. 5. The installer shall, keep at the disposal of the national...

        6. 6. Each notified body shall inform its notifying authority of quality...

        7. 7. CE marking and EU declaration of conformity

          1. 7.1. The installer shall affix the CE marking in the car...

          2. 7.2. The installer shall draw up a written EU declaration of...

        8. 8. Authorised representative

    13. ANNEX XIII

      1. PART A

      2. PART B

    14. ANNEX XIV

  9. ATTACHMENTS

    1. Statement of the European Parliament

Yn ôl i’r brig

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.

Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.

Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill