Search Legislation

Advanced Search

Commission Implementing Decision of 28 February 2012 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the manufacture of glass (notified under document C(2012) 865) (Text with EEA relevance) (2012/134/EU)

Help about what version

What Version

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version

  1. Introductory Text

  2. Article 1.The BAT conclusions for the manufacture of glass are set...

  3. Article 2.This Decision is addressed to the Member States.

  4. Signature

    1. ANNEX

      BAT CONCLUSIONS FOR THE MANUFACTURE OF GLASS

      1. SCOPE

      2. DEFINITIONS

      3. GENERAL CONSIDERATIONS

        1. Averaging periods and reference conditions for air emissions

        2. Conversion to reference oxygen concentration

        3. Conversion from concentrations to specific mass emissions

      4. DEFINITIONS FOR CERTAIN AIR POLLUTANTS

      5. AVERAGING PERIODS FOR WASTE WATER DISCHARGES

        1. 1.1. General BAT conclusions for the manufacture of glass

          1. 1.1.1. Environmental management systems

            1. 1. BAT is to implement and adhere to an environmental management...

              1. Applicability

          2. 1.1.2. Energy efficiency

            1. 2. BAT is to reduce the specific energy consumption by using...

          3. 1.1.3. Materials storage and handling

            1. 3. BAT is to prevent, or where that is not practicable,...

            2. 4. BAT is to prevent, or where that is not practicable,...

          4. 1.1.4. General primary techniques

            1. 5. BAT is to reduce energy consumption and emissions to air...

            2. 6. BAT is to carry out a careful selection and control...

            3. 7. BAT is to carry out monitoring of emissions and/or other...

            4. 8. BAT is to operate the waste gas treatment systems during...

              1. Applicability

            5. 9. BAT is to limit carbon monoxide (CO) emissions from the...

            6. 10. BAT is to limit ammonia (NH3) emissions, when applying selective...

            7. 11. BAT is to reduce boron emissions from the melting furnace,...

              1. Monitoring

          5. 1.1.5. Emissions to water from glass manufacturing processes

            1. 12. BAT is to reduce water consumption by using one or...

            2. 13. BAT is to reduce the emission load of pollutants in...

          6. 1.1.6. Waste from the glass manufacturing processes

            1. 14. BAT is to reduce the production of solid waste to...

          7. 1.1.7. Noise from the glass manufacturing processes

            1. 15. BAT is to reduce noise emissions by using one or...

        2. 1.2. BAT conclusions for container glass manufacturing

          1. 1.2.1. Dust emissions from melting furnaces

            1. 16. BAT is to reduce dust emissions from the waste gases...

          2. 1.2.2. Nitrogen oxides (NOX) from melting furnaces

            1. 17. BAT is to reduce NOX emissions from the melting furnace...

            2. 18. When nitrates are used in the batch formulation and/or special...

          3. 1.2.3. Sulphur oxides (SOX) from melting furnaces

            1. 19. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.2.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 20. BAT is to reduce HCl and HF emissions from the...

          5. 1.2.5. Metals from melting furnaces

            1. 21. BAT is to reduce metal emissions from the melting furnace...

          6. 1.2.6. Emissions from downstream processes

            1. 22. When tin, organotin or titanium compounds are used for hot-end...

            2. 23. When SO3 is used for surface treatment operations, BAT is...

        3. 1.3. BAT conclusions for flat glass manufacturing

          1. 1.3.1. Dust emissions from melting furnaces

            1. 24. BAT is to reduce dust emissions from the waste gases...

          2. 1.3.2. Nitrogen oxides (NOX) from melting furnaces

            1. 25. BAT is to reduce NOX emissions from the melting furnace...

            2. 26. When nitrates are used in the batch formulation, BAT is...

          3. 1.3.3. Sulphur oxides (SOX) from melting furnaces

            1. 27. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.3.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 28. BAT is to reduce HCl and HF emissions from the...

          5. 1.3.5. Metals from melting furnaces

            1. 29. BAT is to reduce metal emissions from the melting furnace...

            2. 30. When selenium compounds are used for colouring the glass, BAT...

          6. 1.3.6. Emissions from downstream processes

            1. 31. BAT is to reduce emissions to air from the downstream...

        4. 1.4. BAT conclusions for continuous filament glass fibre manufacturing

          1. 1.4.1. Dust emissions from melting furnaces

            1. 32. BAT is to reduce dust emissions from the waste gases...

          2. 1.4.2. Nitrogen oxides (NOX) from melting furnaces

            1. 33. BAT is to reduce NOX emissions from the melting furnace...

          3. 1.4.3. Sulphur oxides (SOX) from melting furnaces

            1. 34. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.4.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 35. BAT is to reduce HCl and HF emissions from the...

          5. 1.4.5. Metals from melting furnaces

            1. 36. BAT is to reduce metal emissions from the melting furnace...

          6. 1.4.6. Emissions from downstream processes

            1. 37. BAT is to reduce emissions from downstream processes by using...

        5. 1.5. BAT conclusions for domestic glass manufacturing

          1. 1.5.1. Dust emissions from melting furnaces

            1. 38. BAT is to reduce dust emissions from the waste gases...

          2. 1.5.2. Nitrogen oxides (NOX) from melting furnaces

            1. 39. BAT is to reduce NOX emissions from the melting furnace...

            2. 40. When nitrates are used in the batch formulation, BAT is...

          3. 1.5.3. Sulphur oxides (SOX) from melting furnaces

            1. 41. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.5.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 42. BAT is to reduce HCl and HF emissions from the...

          5. 1.5.5. Metals from melting furnaces

            1. 43. BAT is to reduce metal emissions from the melting furnace...

            2. 44. When selenium compounds are used for decolourising the glass, BAT...

            3. 45. When lead compounds are used for the manufacturing of lead...

          6. 1.5.6. Emissions from downstream processes

            1. 46. For downstream dusty processes, BAT is to reduce emissions of...

            2. 47. For acid polishing processes, BAT is to reduce HF emissions...

        6. 1.6. BAT conclusions for special glass manufacturing

          1. 1.6.1. Dust emissions from melting furnaces

            1. 48. BAT is to reduce dust emissions from the waste gases...

          2. 1.6.2. Nitrogen oxides (NOX) from melting furnaces

            1. 49. BAT is to reduce NOX emissions from the melting furnace...

            2. 50. When nitrates are used in the batch formulation, BAT is...

          3. 1.6.3. Sulphur oxides (SOX) from melting furnaces

            1. 51. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.6.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 52. BAT is to reduce HCl and HF emissions from the...

          5. 1.6.5. Metals from melting furnaces

            1. 53. BAT is to reduce metal emissions from the melting furnace...

          6. 1.6.6. Emissions from downstream processes

            1. 54. For downstream dusty processes, BAT is to reduce emissions of...

            2. 55. For acid polishing processes, BAT is to reduce HF emissions...

        7. 1.7. BAT conclusions for mineral wool manufacturing

          1. 1.7.1. Dust emissions from melting furnaces

            1. 56. BAT is to reduce dust emissions from the waste gases...

          2. 1.7.2. Nitrogen oxides (NOX) from melting furnaces

            1. 57. BAT is to reduce NOX emissions from the melting furnace...

            2. 58. When nitrates are used in the batch formulation for glass...

          3. 1.7.3. Sulphur oxides (SOX) from melting furnaces

            1. 59. BAT is to reduce SOX emissions from the melting furnace...

          4. 1.7.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 60. BAT is to reduce HCl and HF emissions from the...

          5. 1.7.5. Hydrogen sulphide (H2S) from stone wool melting furnaces

            1. 61. BAT is to reduce H2S emissions from the melting furnace...

          6. 1.7.6. Metals from melting furnaces

            1. 62. BAT is to reduce metal emissions from the melting furnace...

          7. 1.7.7. Emissions from downstream processes

            1. 63. BAT is to reduce emissions from downstream processes by using...

        8. 1.8. BAT conclusions for high temperature insulation wools (HTIW) manufacturing

          1. 1.8.1. Dust emissions from melting and downstream processes

            1. 64. BAT is to reduce dust emissions from the waste gases...

            2. 65. For downstream dusty processes, BAT is to reduce emissions using...

          2. 1.8.2. Nitrogen oxides (NOX) from melting and downstream processes

            1. 66. BAT is to reduce NOX emissions from the lubricant burn-off...

          3. 1.8.3. Sulphur oxides (SOX) from melting and downstream processes

            1. 67. BAT is to reduce SOX emissions from the melting furnaces...

          4. 1.8.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 68. BAT is to reduce HCl and HF emissions from the...

          5. 1.8.5. Metals from melting furnaces and downstream processes

            1. 69. BAT is to reduce metal emissions from the melting furnace...

          6. 1.8.6. Volatile organic compounds from downstream processes

            1. 70. BAT is to reduce volatile organic compound (VOC) emissions from...

        9. 1.9. BAT conclusions for frits manufacturing

          1. 1.9.1. Dust emissions from melting furnaces

            1. 71. BAT is to reduce dust emissions from the waste gases...

          2. 1.9.2. Nitrogen oxides (NOX) from melting furnaces

            1. 72. BAT is to reduce NOX emissions from the melting furnace...

          3. 1.9.3. Sulphur oxides (SOX) from melting furnaces

            1. 73. BAT is to control SOX emissions from the melting furnace...

          4. 1.9.4. Hydrogen chloride (HCl) and hydrogen fluoride (HF) from melting furnaces...

            1. 74. BAT is to reduce HCl and HF emissions from the...

          5. 1.9.5. Metals from melting furnaces

            1. 75. BAT is to reduce metal emissions from the melting furnace...

          6. 1.9.6. Emissions from downstream processes

            1. 76. For downstream dusty processes, BAT is to reduce emissions by...

        10. Glossary

          1. 1.10. Description of techniques

            1. 1.10.1. Dust emissions

            2. 1.10.2. NOX emissions

            3. 1.10.3. SOX emissions

            4. 1.10.4. HCl, HF emissions

            5. 1.10.5. Metal emissions

            6. 1.10.6. Combined gaseous emissions (e.g. SOX, HCl, HF, boron compounds)

            7. 1.10.7. Combined emissions (solid + gaseous)

            8. 1.10.8. Emissions from cutting, grinding, polishing operations

            9. 1.10.9. H2S, VOC emissions

Back to top

Options/Help

Print Options

You have chosen to open the Whole Decision

The Whole Decision you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources