- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) No 792/2012 of 23 August 2012 laying down rules for the design of permits, certificates and other documents provided for in Council Regulation (EC) No 338/97 on the protection of species of wild fauna and flora by regulating trade therein and amending Commission Regulation (EC) No 865/2006
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are currently no known outstanding effects for the Commission Implementing Regulation (EU) No 792/2012.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Article 4.Regulation (EC) No 865/2006 is amended as follows: Articles 2...
This Regulation shall enter into force on the twentieth day...
1. Full name and address of the actual (re-)exporter, not of...
2. The period of validity of an export permit or re-export...
6. For live specimens of Annex A species other than captive...
8. Description must be as precise as possible and include a...
9/10. Use the units of quantity and/or net mass in accordance...
13. Use one of the following codes to indicate the source:...
14. Use one of the following codes to indicate the purpose...
15 to 17. The country of origin is the country where the specimens...
18 to 20. The country of last re-export is, in the case of...
21. The scientific name must be in accordance with the standard...
26. The importer/(re)exporter or his agent must, where appropriate, indicate the...
27. To be completed by the customs office of introduction into...
1. Full name and address of the actual (re-)exporter, not of...
2. The period of validity of an export permit or re-export...
6. For live specimens of Annex A species other than captive...
8. Description must be as precise as possible and include a...
9/10. Use the units of quantity and/or net mass in accordance...
13. Use one of the following codes to indicate the source:...
14. Use one of the following codes to indicate the purpose...
15 to 17. The country of origin is the country where the specimens...
18 to 20. The country of last re-export is, in the case of...
21. The scientific name must be in accordance with the standard...
26. The importer/(re)exporter or his agent must, where appropriate, indicate the...
27. To be completed by the customs office of introduction into...
1. Full name and address of the actual (re-)exporter, not of...
2. The period of validity of an export permit or re-export...
6. For live specimens of Annex A species other than captive...
8. Description must be as precise as possible and include a...
9/10. Use the units of quantity and/or net mass in accordance...
13. Use one of the following codes to indicate the source:...
14. Use one of the following codes to indicate the purpose...
15 to 17. The country of origin is the country where the specimens...
18 to 20. The country of last re-export is, in the case of...
21. The scientific name must be in accordance with the standard...
26. The importer/(re)exporter or his agent must, where appropriate, indicate the...
27. To be completed by the customs office of introduction into...
1. Full name and address of the actual (re-)exporter, not of...
8. Description must be as precise as possible and include a...
9/10. Use the units of quantity and/or net mass in accordance...
13. Use one of the following codes to indicate the source:...
14. Use one of the following codes to indicate the purpose...
15 to 17. The country of origin is the country where the specimens...
18 to 20. The country of last re-export is, in the case of...
21. The scientific name must be in accordance with the standard...
23. Provide as many details as possible and justify any omissions...
1. Enter full name and address of importer or authorised representative....
4. The country of origin is the country where the specimens...
5. Only applies where the country from which the specimens are...
10. Enter III for species listed in Appendix III to CITES....
13. The importer has to submit the signed original (form 1)...
14. The customs office shall send the stamped original (form 1)...
1. Enter full name and address of importer or authorised representative....
4. The country of origin is the country where the specimens...
5. Only applies where the country from which the specimens are...
10. Enter III for species listed in Appendix III to CITES....
13. The importer has to submit the signed original (form 1)...
14. The customs office shall send the stamped original (form 1)...
1. A unique number should be generated by the issuing management...
3. Complete the full name, permanent address and country of the...
4. The name, address and country of the issuing management authority...
5. This block has been pre-printed to indicate the validity of...
6. This block has been pre-printed to indicate that cross-border movement...
8. Where appropriate, indicate the number of the security stamp affixed...
9. The scientific name must be in accordance with the standard...
10. Describe, as precisely as possible, the specimen covered by the...
11. Indicate the total number of specimens. In the case of...
12. Enter the number of the Appendix to the Convention (I,...
14. Use the codes below to indicate the source. This certificate...
15/16. The country of origin is the country where the specimens...
17. This block must contain the exhibition registration number.
18. Enter the date of acquisition only for specimens which were...
19. To be completed by the official who issues the certificate....
20. This block may be used to refer to national legislation...
21. This block has been pre-printed to refer to the attached...
3. Complete the full name, permanent address and country of the...
8. Where appropriate, indicate the number of the security stamp affixed...
9. The scientific name must be in accordance with the standard...
10. Describe, as precisely as possible, the specimen covered by the...
11. Indicate the total number of specimens. In the case of...
12. Enter the number of the Appendix to the Convention (I,...
14. Use the codes below to indicate the source. This certificate...
15/16. The country of origin is the country where the specimens...
17. This block must contain the exhibition registration number.
18. Enter the date of acquisition only for specimens which were...
19. Provide as many details as possible and justify any omissions...
1. Full name and address of the holder of the certificate,...
4. Description must be as precise as possible and include a...
5/6. Use the units of quantity and/or net mass in accordance...
9. Use one of the following codes to indicate the source:...
10 to 12. The country of origin is the country where the specimens...
13 to 15. The country of import is, where applicable, the country having...
16. The scientific name must be in accordance with the standard...
1. Full name and address of the applicant for the certificate,...
4. Description must be as precise as possible and include a...
5/6. Use the units of quantity and/or net mass in accordance...
9. Use one of the following codes to indicate the source:...
10 to 12. The country of origin is the country where the specimens...
13 to 15. The country of import is, where applicable, the country having...
16. The scientific name must be in accordance with the standard...
18. Provide as many details as possible and justify any omissions...
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: