The Pollution Prevention and Control (Scotland) Regulations 2012, Paragraph 11 is up to date with all changes known to be in force on or before 05 March 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
11.—[F1(1)] The operator of a solvents installation must monitor emissions from the installation in accordance with [F2sub-paragraphs (2) to (4)]
[F3(2) Channels to which abatement equipment is connected, and which at the final point of discharge emit more than an average of 10 kilogrammes per hour of total organic carbon, must be monitored continuously for compliance.
(3) In other cases, SEPA must ensure that either continuous or periodic measurements are carried out. For periodic measurements at least three measurement values must be obtained during each measurement exercise.
(4) Measurements are not required where end-of-pipe abatement equipment is not needed to comply with these Regulations.]
Textual Amendments
F1Sch. 2 para. 11(1) renumbered (31.12.2020) by The Environment (EU Exit) (Scotland) (Amendment etc.) Regulations 2019 (S.S.I. 2019/26), regs. 1, 13(24)(e)(i); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Sch. 2 para. 11(1) substituted (31.12.2020) by The Environment (EU Exit) (Scotland) (Amendment etc.) Regulations 2019 (S.S.I. 2019/26), regs. 1, 13(24)(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.
