- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Commission Regulation (EU) 2017/1151. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.
Article 4.Requirements for type-approval regarding the OBD system
Article 4a. Requirements for type-approval regarding devices for monitoring the consumption of fuel and/or electric energy
Article 5.Application for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
Article 6.Administrative provisions for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
Article 11.Application for EC type-approval of a type of replacement pollution control device as a separate technical unit
Article 12.Administrative provisions for EC type-approval of replacement pollution control device as separate technical unit
Article 13.Access to vehicle OBD and vehicle repair and maintenance information
Article 14.Compliance with the obligations regarding access to vehicle OBD and vehicle repair and maintenance information
Article 18.Amendments to Commission Regulation (EU) No 1230/2012
ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL
2. ADDITIONAL TECHNICAL REQUIREMENTS AND TESTS
2.3. Provisions for electronic system security
2.3.1. Any vehicle with an emission control computer shall include features...
2.3.2. Computer-coded engine operating parameters shall not be changeable without the...
2.3.3. At the request of the manufacturer, the approval authority may...
2.3.4. Manufacturers using programmable computer code systems shall take the necessary...
2.3.5. In the case of mechanical fuel-injection pumps fitted to compression-ignition...
2.3.6. Manufacturers shall effectively deter reprogramming of the odometer readings, in...
4.1.1. Every vehicle produced under a Type Approval according to this...
4.1.2. The manufacturer shall check the conformity of production by testing...
4.1.3. For the purposes of the manufacturer's conformity of production check,...
4.1.4. The frequency for product verification performed by the manufacturer shall...
4.1.5. The Approval Authority which has granted type-approval may at any...
4.1.6. The normal frequency of physical test verifications by the Approval...
4.1.7. The Approval Authority shall report the results of all audit...
4.1.8. In case of non-conformity Article 30 of Directive 2007/46/EC shall...
4.2. Checking the conformity of the vehicle for a type 1...
4.2.1. The Type 1 test shall be carried out on production...
4.2.2. A sample of three vehicles shall be selected at random...
4.2.3. The statistical method for calculating the test criteria is described...
4.2.4. At the request of the manufacturer and with the acceptance...
4.2.5 Tests for conformity of production of vehicles fuelled by LPG...
4.3.1 Measures to ensure the conformity of production with regard to...
4.3.2. Electric energy consumption verification for conformity of production
4.3.2.1. During the conformity of production procedure, the break-off criterion for...
4.3.2.2. During this first applicable WLTP test cycle, the DC energy...
4.3.2.3. The value determined according to paragraph 4.3.2.2 shall be compared...
4.3.2.4. Conformity for EC shall be checked using the statistical procedures...
4.7. Checking the conformity of the vehicle for On-board Diagnostics (OBD)...
ATTACHMENTS
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: